NetComm NB714 User Manual
USB
Wireless
ADSL2+ QoS
Firewall
USB
Wireless
NB714 G.SHDSL
2-wire or 4-wire SHDSL Modem Router
KEY FEATURES
NetComm’s NB714 G.SHDSL Modem Router delivers high-speed symmetrical data transmission of up to 2.304Mbps (2-wire)
or 4.608Mbps (4-wire).
Enhanced Quality of Service (QoS) for VoIP applications through VLAN.
Advanced SPI Firewall.
Complete with four 10/100Mbps auto-sensing ports for PC or LAN connections.
LAN users can access Internet simultaneously through NAT and IP sharing.
Firmware upgradeable through FTP
Simple operation and low power consumption.
Efficient IP routing and transparent learning bridge to support broadband Internet services
VPN pass-through for safeguarded connections
Virtual L AN ( VL AN) offers significant benefits for bandwidth, flexibility, performance and security
Easy configuration & management with password control for various applications and environments
NetComm’s NB714 (4-wire) G.SHDSL 4-port Security Modem Router delivers
symmetrical DSL services to small and medium size business making them an
economical alternative to Leased Line or ISDN services.
Capable of operating in 2-wire or 4-wire configuration, the NB714 can provide
data rates from 64kbps to 2.304Mbps (2-wire) or 128kbps to 4.608Mbps (4wire). It is also fully compliant with the ITU-T G.991.2 standards.
The NetComm NB714 G.SHDSL Modem Router combines integrated high-end
Bridging/Routing capabilities with advanced functions such as Multi-DMZ,
virtual server mapping, and VPN pass-through. It also supports port-based
VLAN and IEEE802.1q VLAN over an ATM network. An advanced Firewall with
Stateful Packet Inspection (SPI) and Denial of Service (DoS) protection, all
combine to protect your network from outside intruders.
With 4 x 10/100 Base-T auto-sensing, auto-negotiation and auto-MDIX
switching ports, the NetComm G.SHDSL Modem Router enables you to
leverage the latest broadband technology to meet the growing need for high
performance data communication.
NB714 G.SHDSL
Internet
Firewall
NB714
G.SHDSL Modem Router
PC PC PC PC
2-wire or 4-wire SHDSL Modem Router
TECHNICAL SPECIFICATIONS
ROUTING
• Supports IP/TCP/UDP/ARP/ICMP/IGMP protocols
• IP routing with static routing and RIPv1/RIPv2 (RFC1058/2453)
• IP multicast and IGMP proxy (RFC1112/2236)
• Network address translation (NAT/PAT) (RFC1631)
• NAT ALGs for ICQ/Netmeeting/MSN/Yahoo Messenger
• DNS relay and caching (RFC1034/1035)
• DHCP server, client and relay (RFC2131/2132)
BRIDGING
• IEEE 802.1D transparent learning bridge
• IEEE 802.1q VLAN • Port-based VLAN
• Spanning tree protocol
SECURITY
• DMZ host/Multi-DMZ/Multi-NAT function
• Virtual server mapping (RFC1631)
• VPN pass-through for PPTP/L2TP/IPSec tunneling
• Natural NAT firewall
• Advanced Stateful packet inspection (SPI) firewall
• Application level gateway for URL and keyword blocking
• User access control: deny certain PCs access to Internet service
MANAGEMENT
• Easy-to-use web-based GUI for quick setup, configuration and
management
• Menu-driven interface/Command-line interface (CLI) for local
console and Telnet access
• Password protected management and access control list for
administration
• SNMP management SNMPv1/SNMPv2 (RFC1157/1901/1905)
agent & MIB II (RFC1213/1493)
• Software upgrade via web-browser/TFTP server
ATM
• Up to 8 PVCs • OAM F5 AIS/RDI and loopback
• AAL5
ATM QOS
• UBR (Unspecified bit rate) • CBR (Constant bit rate)
• VBR-rt (Variable bit rate real-time)
• VBR-nrt (Variable bit rate non-real-time)
AAL5 ENCAPSULATION
• VC multiplexing and SNAP/LLC
• Ethernet over ATM (RFC 2684/1483)
• PPP over ATM (RFC 2364)
• Classical IP over ATM (RFC 1577) PPP
• PPPoE for fixed & dynamic IP (RFC 2516)
• PPP over ATM for fixed and dynamic IP (RFC 2364)
• User authentication with PAP/CHAP/MS-CHAP
WAN INTERFACE
• SHDSL: ITU-T G.991.2 (Annex A, Annex B)
• Encoding scheme: 16-TCPAM
• Data Rate (2-wire mode): N x 64Kbps (N=0~36, 0 for adaptive)
• Data Rate (4-wire mode): N x 128kbps (N=0~36, 0 for adaptive)
• Impedance: 135 ohms
LAN INTERFACE
• 4-ports switching hub
• 10/100 Base-T auto-sensing and auto-negotiation
• Auto-MDIX
HARDWARE INTERFACE
• WAN: RJ-11 • LAN: RJ-45 x 4
• Console: RS232 female • RST: Reset button for factory
default
INDICATORS
• General: PWR • WAN: LNK, ACT
• LAN: 1, 2, 3, 4 • SHDSL: ALM
PHYSICAL/ELECTRICAL
• Dimensions: 18.7 x 3.3 x 14.5cm (WxHxD)
• Power: 100~240VAC (via power adapter)
• Power consumption: 9 watts max
• Temperature: 0~45oC
• Humidity: 0%~95%RH (non-condensing)
MEMORY
• 2MB Flash Memory, 8MB SDRAM
Key Features:
Built-In advanced SPI firewall
Four 10/100Mbps Auto-negotiation and Auto-MDIX switching ports for flexible LAN connectivity
DMZ host/Multi-DMZ/Multi-NAT enables multiple workstations on the LAN to access the Internet
Full ATM protocol stack implementation over SHDSL
PPPoA and PPPoE support user authentication with PAP/CHAP/MS-CHAP
SNMP management with SNMPv1/SNMPv2 agent and MIB II
Enhancements and new features are available via Internet software upgrade
3-YEAR WARRANTY WHEN YOU REGISTER ONLINE
1 year warranty out of the box. Extra 2 years FREE with online registration at www.netcomm.com.au
(Conditional u pon onlin e regist ration
PACKAGE CONTENTS
• NB74 (2-wire/4-wire) G.SHDSL Modem Router
• 9V DC 1.0 Amp power supply
• RS232 Console Cable
Your NetComm dealer:
NETCOMM LIMITED ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia
P: 02 9424 2070 F: 02 9424 2010 E: sales@netcomm.com.au W: www.netcomm.com.au
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are
subject to change without notice. Images shown may vary slightly from the actual product.
• RJ11 line connection cable
• RJ45 10/100 Ethernet cable
• User Guide CD
Loading...