NetComm NB7 Specifications

NetComm NB7

ADSL2+ Ethernet Modem Router

The new NB7 Series from NetComm is the perfect modem for all users wanting
to experience the full benefit of ADSL2+.

The NetComm NB7 ADSL2+ Ethernet Router uses Broadcom BCM6338
ADSL2+ single Chip solution that fully complies with ANSI T1.413 Issue 2, ITU­T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard.

The ADSL2+ Ethernet Router also provides higher data transmission rates with
ADSL2, ADSL2+, and Extended Reach-ADSL support. The NB7 will provide
up to 12Mbps speed with an additional 600 feet reach for ADSL2; and up to
30Mbps speed with distance up to 5,000 feet for ADSL2+ Support. In addition,
with ADSL2+ Annex M support, upstream rate will be improved to up to 3Mbps.

With all the features you expect from a quality modem/router the NB7
comes with a firewall and QoS making it suitable for any use that requires
prioritisation such as online gaming or VoIP.

Targeted at the residential users, the ADSL2+ Ethernet router is for both single
user using Bridge mode with host based PPPoE Client and multi-users utilizing
the ADSL2+ Ethernet Router inbuilt PPPoE/A, IP routing, NAT functionality to
share the ADSL link.

The ADSL2+ Ethernet Router comes with the Packet Filtering firewall and DMZ
support for a full security options against malicious hackers. With Universal
Plug and Play support, home networking becomes a breeze for everyone in the
family. Multi Port Range/Popular Application Forwarding makes it even easier
to select which application you want your network to allow while ensuring your
security at the same time.

KEY FEATURES

Fully featured ADSL2+ Broadband Modem for super fast Internet access

Ethernet single port connection

Built in Firewall for security and peace of mind

VPN Passthrough

Supports ADSL, ADSL2 and ADSL2+

UPnP™ and QoS

Simple Web based setup and configuration

NETCOMM LIMITED ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia
P: 02 9424 2070 F: 02 9424 2010 E: [e-mail] W: www.netcomm.com.au

Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are
subject to change without notice. Images shown may vary slightly from the actual product.

NetComm NB7

ADSL2+ Ethernet Modem Router

TECHNICAL SPECIFICATIONS

Your NetComm dealer:

ADSL /ATM SUPPOR T

• ANS I T1.413 issue 2, ITU -T G.99 2.1 (G.dmt) and G .992.2 (G.lit e) complian t

• ITU-T G.992.1 (G.dmt Ann ex B) Population Opt ion

• ADSL2, A DSL2+, RE-ADSL com pliant

• ADSL2+ An nex M Suppo rt

• Rate Adaptive modem at 32 K bps steps

• TR-067 C omplianc e

• ATM Layer with Traffic shaping Qo S Suppor t (UBR, CBR, VBR-r t, VBR -nrt )

• AAL ATM At tributes - AA L5

• Multiple PVC up to 16 suppor t

• Spectral com patibility with P OTS

• F5 OAM Loopback /Send a nd Receiv e

ENCA PSULATI ON SUP PORT

• RFC268 4 Bridge and Routed L LC and VC Mux suppor t

• RFC236 4 PPPoA Client support

• RFC2516 PPPo E Client support

• RFC222 5/R FC1577 C lassica l IP Supp ort

• Transparent Brid ge Support

• PAP/CHAP/MS- CHAP for Password Authentic ation Sup port

NET WORK S UPPO RT

• Static IP, Dynamic R IP rout ing support

• IP/TCP/ UDP/ ICMP/ARP/R ARP Applic ation Support

• Network Ad dress Translation (NAT)

• Port Mapping/F orwarding

• Easy setup of Port For warding rules for pop ular Game s/Application

• NAT Application Level G ateway for popular app licatio ns

• DHCP Ser ver/Relay/client

• DNS Relay Agen t

• DMZ suppor t

• Single Sessio n IP Sec an d PPT P/L2 TP VP N pass through suppo rt

• PPP Always on with confi gurable t imeout

• PPP Dial on Dema nd

• Universal Plug and Play Sup port

MAN AgEMENT SU PPOR T

• Web Based HT TP management GU I

• TFTP/ FTP Suppor t for Firmware Upgrade

• Web Based Firmw are Upgrade (Lo cal)

• Soft Factory Reset Butto n via Web GU I

• Diagnostic Test ( DSL, OAM, Network, Ping Test)

• Telnet/CLI ( Read Only)

• Syslog Suppo rt

• TR-069 R emote Management Support

• Firmware upgradeable for future fea ture enhan cement

SECURIT Y SUPP ORT

• NAT for basic Fire wall suppo rt

• Packet Filtering Firewall Suppor t

• Stateful Packet Inspe ction Su pport

• Protection aga inst Denial of Service att acks

• Password Aut hentica tion to Mo dem

HARDWARE

• Broadcom BC M63 38 Single Chip AD SL2+ Transc eiver

• Broadcom BC M63 01 Line Driver

• 2 MB NOR Flash R OM (P opulatio n Option of 0.5MB S PI Flas h or 4MB

NOR Fla sh)

• 8 MB SDRA M (Population O ption of 2M B or 16MB)

• Dying Gasp Sup port

• ITU K.21 S uppor t

• 10KV Surge Pro tection Suppor t (Population Option)

* Feature sub ject to change

PLAT FORM S UPPO RT

• Ethernet - OS Independent

POWER R EQUIREMENTS

• Input Voltage : 12V DC +/- 10%

• Input Current : 0.5A

PHYS ICA L SPECIFIC ATION S

LED Ind icator s :

• 1 x Power Bi-colo r LED (G reen/Red)

• 1 x Ethernet Link /Activity S tatus L ED (Gre en)

• 1 x DSL Link St atus LE D (Green)

Exte rnal Co nnecto rs :

• 1 x RJ-11 Telephone socket for ADS L line

• 1 x RJ45 for 10/10 0Base-T Ethernet ( AutoMDI/MDIX)

• 1 x DC Jack for Power I nput

• 1 x Factory Def ault Rese t Butto n

• 1 x On/Off Pu sh Button Swit ch (Pop ulation O ption)

Measur ements :

• Dimension : 105 (L ) x 105 ( W) x 30 ( H) mm

• Weight : Approx. 2 50g

REgU LATORY APP ROVAL S (PENDINg )

• Asia Pacific / Europe : CE (EN 55022:98 /EN 55024: 9 8), IEC 6 0950

ENVI RONMENTAL

TEMP ERATURE

• Operating :

0o to 40 o Celsius
32 o to 104 o Fahrenheit

• Non-Opera ting :

-25 o to 70 o Celsi us

-13 o to 158 o Fahrenheit

HUMI DITY

• Operating : 30 % to 80% Re lative Humidity ( Non-Condens ing)

• Non-Opera ting : 30% t o 95% Relat ive Humidi ty (N on-Condensing )

Internet

Firewall

Telephone

Wall Socket

Splitter with

Microfilter

Connected to

Ethernet Interface

NB7

ADSL2+ Broadband Modem

Home

Telephone