WAN Port
4-Port Ethernet Switch
Power
TECHNICAL SPECIFICATIONS
NETWORKING/TRANSPORT LAYER PROTOCOL
• 802.1D Bridge for LAN and Wireless bridging
• DHCP server
• PPPoE, Telstra BigPond, DHCP client and Fixed IP for
broadband DSL/Cable ISP connection (eg Optus Cable)
• MAC address spoofing
• Static routes
• DNS proxy
• Dynamic DNS for dynamic IP based domain name service
• NTP client for network time synchronisation
• 802.11g Access Point – backwards compatible with
802.11b devices
FIREWALL/ NAT
• Stateful packet inspection
• DoS attack prevention
• Virtual Server/Port Forwarding
• Supports UPnP
• One DMZ host
• IP packet filtering with scheduling (MAC based access
control list)
• Event logging and email alert for DoS attack
• ALG support including: IPSec, PPTP, L2TP, H.323, SIP,
NetMeeting, MS Messenger, RealPlayer, Quick Time (ICQ,
CuSeeMe, VDO Live, Quake III, Diablo II, Age of Empires II)
WIRELESS SECURITY
• Supports 40/64, 128 and 152-bit WEP encryption
• MAC based access control list
• Wireless Access Control (SSID)
• Wi-Fi Protected access (WPA) compatible (Pre-shared Key)
• 802.1x
WEB CONTENT FILTERING
• Supports true proxy-based URL blocking with scheduling
MANAGEMENT
• Web-based configuration wizard
• Web-based firmware upgrade, configuration profile
backup/restore
• Remote management
• Supports Windows®-based syslog viewer
ACCESS INTERFACE
• WAN: One 10/100 Base TX port, auto-sensing, auto MDIX,
RJ-45 connector
• LAN: Four 10/100 Base TX ports, auto-sensing, auto
MDIX, RJ-45 connector
• Wireless: External Antenna, frequency: 2.412~2.484 GHz,
supports 13 channels, data rates 6, 9, 12, 18, 24, 36, 48 and
54 Mbps auto fallback function, Super-G Wireless Mode
LED INDICATORS
• LED 1 – 4 shows status of local port #1 – 4
• WLAN LED shows Wireless LAN connection
• WAN LED shows WAN/ Internet port status
• Power LED
• Reset Button (factory default-setting button )
ENVIRONMENT
• Operation Temperature: 0°C ~ 45°C
• Operation Humidity: 5% ~ 95%
• Storage Temperature: -20 ~+85°C
• Storage Humidity: 5% ~ 95%
POWER
• AC Adaptor: Input 240V AC; Output 12V DC/1.0 Amps
• Maximum power consumption: 10 Watts
DIMENSIONS & WEIGHT
• 180mm x 143mm x 40.5mm (W x D x H); 320g without holder
CERTIFICATION
• C-Tick
PACKAGE CONTENTS
• NB600W Super-G Wireless Gateway
• Power supply
• Vertical mounting foot
• Manual/Tutorial CD
• Package Contents List
• Quick Start Guide
NB600W Super-G Wireless Gateway
NETCOMM LIMITED ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia
P: 02 9424 2070 F: 02 9424 2010 E: sales@netcomm.com.au W: www.netcomm.com.au
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are
subject to change without notice. Images shown may vary slightly from the actual product.
Your NetComm dealer:
KEY FEATURES
Supports PPPoE, DHCP Client and Server, TCP/IP, UDP, ICMP, DNS Proxy,
Dynamic DNS, SNTP features
Four 10/100M Base TX ports for PC or LAN connection and one 10/100M Base
TX WAN port for broadband connection
802.11g Wireless Access Point supports up to 54Mbps
108Mbps Super-G wireless mode – turbocharge your transfer rates*
Supports automatic hacker pattern detection to block malicious intrusions
Network Address Translation (NAT) conceals private network from the Internet
VPN passthrough allows secure communication protocols
Web-based user interface for easy installation, configuration and management
Virtual Server/Port Forwarding allows outside users to access internal servers
via the Internet
Administrators can block specific users’ Internet access by UPI
(User Profile Identification)
Supports UPnP for easy device discovery and advanced Internet applications
3-YEAR WARRANTY WHEN YOU REGISTER ONLINE†
1 year warranty out of the box. Extra 2 years FREE with online registration at
www.netcomm.com.au
†Conditional upon online regis tration)
*When used in conjunctio n with compatoible wireless client adapto rs