Your Netcomm dealer:
NetComm is Australia’s dynamic data communications and 
networking solutions provider. For more information on this and
other NetComm products, please visit www.netcomm.com.au
NetComm Limited ABN 85 002 490 486 
PO Box 1200, Lane Cove NSW 2066 Australia. 
PHONE (02) 9424 2070 • FA X (02) 9424 2010 
www.netcomm.com.au • EMAIL sales@netcomm.com.au
Trademarks and registered trademarks are the property of NetComm
Limited or their respective owners. Specifications are subject to change
without notice. Images shown may vary slightly from the product.
BROADBAND ROUTER WITH 10/100 4-PORT SWITCH
HOME & MICRO BUSINESS
TECHNICAL SPECIFICATIONS
• NB2800 ADSL/Cable Router
• Cat-5 RJ45 straight through 
Ethernet Cable
• Plug Pack 5VDC 1.0A, 
Quick Start and Installation Guide
• Self-adhesive rubber feet
PACKAGE CONTENTS
Standards  IEEE 802.3 10BASE-T 
Compliance IEEE 802.3U 100BASE-TX
Interface WAN: 1x10/100Mbps Ethernet RJ-45
LAN: 4x10/100Mbps auto-sensing
switch ports within one uplink 
port for LAN
Protocol TCP/IP, UDP, NAT, DHCP, PPPoE, 
Telstra Heart Beat 
PAP, CHAP
Maximum Users Up to 253 users
IP Setting WAN: DHCP client, Static IP
LAN: DHCP auto-assignment, Static IP
Management Web-Base UI management
Password authentication for 
configuration 
Fault-tolerance TFTP upgrade 
firmware 
WAN MAC address configuration 
Remote configuration 
Reset button for device reset & 
factory default
Security NAT deny external intruder
Filter: IP filter, URL filter, MAC
filtering
Remote Access Special Application
Virtual server/Port forwarding 
DDNS 
Multiple Exposed Host (DMZ Host)
Routing RIP1, RIP2 compatible
Static Routing 
VPN (PPTP, IPSec) pass-through
LED Display Power
Diagnostic 
WAN: Link/Activity 
LAN: Link/Activity, FD/collision
Power External, DC 5V,  1A
Environmental Operation Temperature: 0~45°
Storage Temperature:-20~70° 
Humidity 0~90% non-condensing
Flash ROM Firmware upgradeable via TFTP
Certification C-Tick
Dimension 87 (L) x 150 (W) x 30 (H) mm 
Mounting Desktop or wall mount
BASIC SYSTEM REQUIREMENTS
Allows multiple users to access Internet at the 
same time by providing maximum Internet 
utilisation to multiple users to share a single 
public IP Address.
Acts as both DHCP client and DHCP server for 
receiving WAN IP Address from ISP and configuring 
IP Addresses to LAN PCs.
Web-based user interface for easy configuration 
and management through web browser like 
Netscape Communicator 4.0 or later or Internet 
Explorer 4.0 or later.
Compatible with all popular Internet applications 
and Cable and ADSL Service Providers.
NAT security protects internal users from outside 
intruders.
Allows administrators to block certain users from 
accessing the Internet, specific applications, or 
certain web sites.
Can allow unrestricted two-way communication 
between one PC on your LAN and certain Internet 
services like conferencing, video and gaming 
applications.
Enhances the routing performance with Dynamic 
and Static routing options.
Allows change of WAN MAC address.
Allows authorised users to manage device 
remotely.
SOFTWARE FEATURES
ADSL or Cable Modem with Ethernet connection port
PC running TCP/IP Ethernet ie: Windows®, 
Mac OS or Linux
PC equipped with 10/100 Ethernet Port
Web Browser
ADSL or Cable ISP service
240 Volt GPO (Power Point)
Note: Additional Cat-5 Ethernet Cables required for
connection to multiple PCs.
Four 10/100  
auto-sensing 
switched ports
Power
Uplink port 
– connect to
another switch
ADSL/Cable 
modem
Ethernet port
Reset
button
3 YEAR WARRANTY
*
1 year warranty out of the box. 
Extra 2 years FREE with online
registration at www.netcomm.com.au
*Conditional upon registration online.
N367