NESCHEN HOTLAM 1650 TH, COLDLAM 1650 Instruction Manual

NESCHEN HOTLAM 1650 TH AND

COLDLAM 1650

LARGE FORMAT LAMINATORS

USER INSTRUCTIONS

Rev. 01-2020

English

2

CONTENTS

Introduction ...................................................................................................................................................................... 3

Applications ...................................................................................................................................................................... 4

Web guide .......................................................................................................................................................................... 5

Description of main parts of Neschen Laminator ....................................................................................... 6

Control left ......................................................................................................................................................................... 6

Main switch – Positions ............................................................................................................................................. 7

Control panels – Right / Settings ....................................................................................................................... 7-9

Silicone paper and laminated print .................................................................................................................... 9

Fuses and footswitch connector .......................................................................................................................... 9

Roll carrier ..................................................................................................................................................................... 9-10

Inserting a roll of material onto the shaft ...................................................................................................... 10

Work safety ....................................................................................................................................................................... 10

Safety guidelines ....................................................................................................................................................... 11-12

Safety pictograms attached to Neschen laminator ................................................................................. 12

FIRE SAFETY ........................................................................................................................................................................ 13

Disposing of the product or its parts................................................................................................................. 13

Maintenance .................................................................................................................................................................... 13

Warranty terms and conditions ........................................................................................................................... 14

Technical Specifications ......................................................................................................................................... 15

3

1. INTRODUCTION

Dear Customers,
We are very pleased that you have selected the Neschen laminator. We trust that this

machine will increase your work productivity. Since it is a device which is equipped
with rotating rollers and moving parts and is powered by electricity, work safety
principles must be observed.

Before the Neschen laminator can be used, the user (the firm) must make sure that all
the device operators, maintenance workers and their supervisors have acquainted
themselves with these User Instructions. Ensured must be also the knowledge of
generally binding regulations concerning occupational safety and prevention of injuries

applicable in the user’s country. Make sure these User Instructions are always

available to workers who will be using the laminator. Incorrect operation and use can
result in damages which are not covered by the product’s warranty.

These User Instructions contain the laminator technical specifications and information
concerning putting the laminator into service and operating it. They contain important
information about work safety and maintenance, and must be regarded as part of the
laminator. Production workers should be acquainted with the information contained in
these User Instructions, and they should understand it. Of particular importance is
information concerning safety measures. In order to ensure a satisfactory level of
knowledge, it is desirable to provide initial training followed by regular worker refresher
training.

If you don’t understand any of the information contained in these User Instructions,
please contact the laminator vendor. We suggest you make a copy of the User
Instructions and keep the original in a safe place in case the copy gets lost or damaged.
When working with the device, abide by the provided safety guidelines to avoid the
danger of injuring yourself or other person around you, or damaging any tangible
assets.

We wish to assure you that we paid a close attention when making the Neschen
laminator and are convinced that, provided all the principles stated in these User
Instructions are observed, you will be happy with your machine.

NESCHEN

4

2. APPLICATIONS

1. The Neschen large-format laminator is intended for applying laminating and

backing foils using
either pressure or heat to activate an adhesive layer to large-format prints,
plates, boards and similar products whose width does not exceed 1650 mm.

2. Although the laminator is designated as a large-format device, it can be also
used for laminating smaller formats, starting from A5.

3. Maximum length of laminated prints is not limited by the laminator’s

construction.

4. Larger formats (greater than A0 or equal to the device’s maximum working
width) may require

the help of another person.

5. The Neschen laminator’s simplicity and flexibility is based on its ability to work

with cut material (sheets), cut from material in rolls. The user has a unique
opportunity to choose a laminating technique. Either sheet lamination or from­roll lamination or roll-to-roll lamination.

6. Any changes made to this laminator without the manufacturer’s permission will

relieve the vendor from its liability for any damage or injury!

7. If the laminator’s features allow the device to be used for other purposes not
listed here, the user must consult such application with the vendor.

8. When working with the device, abide by the provided safety guidelines to avoid
injuring yourself or other persons around you.

9. Those instructions which require special attention are in the User Instructions
identified with the following safety symbol:

5

2.1. Web guide ColdLam 1650

2.2. Web guide HotLam 1650 TH