Nero 360700 Instruction Manual

Images in this manual are for illustrative purposes only.

Due to constant improvements, we advise that changes to the design, material,

specifications and product configuration may occur at any time without notice.

Backed by the Nero 1 Year Warranty * Imported By: R. Weatherdon & Co Pty Ltd

www.weatherdon.com.au * Made in China

Nero Carpet Blower

INSTRUCTION MANUAL

Model: 360700

2

Nero guarantees floor blower use for 1 year. If your blower or accessories are handed in
for repair, a copy of the receipt must be enclosed. Guarantee repairs are being made on

the following conditions:

 Defect is attributable to flaws or defects in materials or workmanship. (Wear and tear

as well as misuse is not covered by the guarantee).

 Directions of this instruction manual have been thoroughly observed.
 Repair has not been carried out or attempted by other than Jetmaster service staff.
 Only original accessory has been applied.
 The product has not been exposed to abuse such as knocks, bumps or frost.
 Only water without any impurities has been used.
 The high pressure washer has not been used for rental not used commercially in any

other way.

Repairs under this guarantee include replacement of defective parts, exclusive of packing

and postage / carriage.

Read all instructions before using the machine

 Inform your dealer immediately if there is any transport damage.
 Completely remove the accessories from the carton.

General Instruction

 This appliance is for household, hotel and some places recommended by Nero (on

the carton box) only.

 To avoid electrical shock, do not expose to rain, place it indoor.
 To avoid injury, health hazard, or property damage: The plug of the power cord must

be removed from the wall socket before changing the bag. Never pull the vacuum
cleaner by its cord when moving.

 Do not use around explosive dust, liquid or vapours, electrical devices may produce

arcs or sparks which can cause fire or even explosion.

 Do not use at filling stations or anywhere gasoline is stored or dispensed.
 Keep the machine away from oven, stoves, or any machine that produce heat.
 Check before operation that the local power supply is the same as the specification

on the rating label.

 Do not let children operate the machine.
 If the power cord becomes damaged, do not use the machine, it must be replaced by

an authorised service agent.

The packaging material can be recycled. Please do not place the packaging into

the ordinary refuse for disposal, but arrange for the proper recycling.

Old appliances contain valuable materials that can be recycled.

Please arrange for the proper recycling of old appliances. Batteries, oil, and

similar substances must not enter the environment.
Please dispose of your old appliances using appropriate collection systems.

ENVIRONMENTAL PROTECTION

WARRANTY

SAFETY INSTRUCTION

3

PROPER POSITION ADJUSTMENT

adjust the position of airflow

4

PARTS NAME

power regulator

handle

knob

clamp

stand

big wheel

5

OPERATION METHOD

press when assembled or disassembled

fix the handle into the unit as
picture shows

power regulator

adjust the airflow by regulator

off = power off
I = level I
II = level II
III = level III

6

OPERATION METHOD

make sure the vents are
not blocked to avoid any
damage to motor

loosen the knobs, then
fix the carpet by clamp.
Tighten the knobs, start
machine to dry the floor
underneath the carpet

Vents

Knobs

Pos.

Part No. Description

Qty.

1 106901001 Stopper234567

106901002

Nameplate

106901003

Screw (ST4.9*20)

106901004

Right casing (from front view)

106901005

Fan wheel

106901006

Screw (M6*40)

106901007

Clamp

111112

1

4

8

9

101112

13

106901008

Nut (M6)

106901009

Knob

106901010

Capacitor (14uF)

106901011

Sticker

106901012

Wiring cap

106901013

Screw (ST3.9*14)

22113

4

1415161718

19

106901014

Screw socket

106901015

Left casing (from front view)

106901016

Cable tie

106901017

Power cable set

106901018

Screw (M5*12)

106901019

Vent for motor mounting

21114

1

2021222324

25

106901013

Screw (ST3.9*14)

106901021

Switch

106901022

Switch cover

106901023

Screw (M3*8)

106901024

Speed regulator

106901013

Screw (ST3.9*14)

41121

2

2627282930

31

106901026

Handle cover

106901027

Handle bar

106901028

Holder for handle

106901029

Wheel shaft

106901030

Wheel shaft sleeve

106901031

Wheel set (left&right)

11122

2

323334

35

106901032

Circlip

106901033

Circlip

106901018

Screw (M5*12)

106901035

Motor YY700-4

222

1

363738

39

106901036

Nut (M5)

106901037

Stand holder

106901038

Stopper

106901013

Screw (ST3.9*14)

412

Page 1

2

Air Flow:

70/80/90 M³/Min

Model:

360700

Max. Sound level:

75 DB(A)

Power:

650W

Weight:

11.5kg

26

24

23

22

21

20

19

18

17

16

15

14

13 12

11

10

9

8

7

6 5

4

3

2

1

25

27

28

29

30

31

32

33

34

35

36

37

38

39