USER MANUAL
SHK1
Digital Outdoor Amplified
Antenna
Attractive shark fin design antenna
Excellent reception for digital terrestrial signals: TV (DVB-T) & radio [T-DAB] programs.
Built-in amplifier for superior UHF and VHF signal reception for digital television.
360° orientation for both horizontal and vertical alignment.
Scientifically designed flat panel array improves reception for digital and analogue signals.
Can be wall mounted, mast mounted or railing mounted (e.g. on a balcony).
Weather resistant: waterproof, UV resistant.
Outdoor easy mounting kit included for simple installation.
Installation Manual
A. Fixing the antenna to a mast:
• Place U-bolt around the mast, adjust the antenna bracket and fasten screws.
• Allow approx. 1 metre of loosely fitted signal wire (as per the above right image) next to
the fixing pole approx. 0.5 m below the antenna to allow the antenna to rotate.
B. Wall Mounting:
Drill holes in the wall according to the holes’ position on the antenna bracket, hammer plastic
anchors (rawlplugs) into the holes, attach bracket to the wall and secure with screws.
C. Railing Mounting (Balcony):
Install the antenna bracket to the railing using the U-bolt, adjust the rotating base on the bracket,
attach the signal cable and fix the antenna onto the rotation base after adjusting the antenna to
the right direction.
1. Waterproof installation
Connect the signal cable to the signal output
jack of the antenna and secure cable.
Fix the waterproof cap to cover the
connections to avoid water penetration.
Loading...