neomouv CRONOS User Manual

Page 1
USER MANUAL
CRONOS
THIS MANUAL CONTAINS IMPORTANT
SAFETY AND OPERATING INSTRUCTIONS
Model conforms to safety requirements
Product may differ from photos
Page 2
CONTENTS
1- PRESENTATION .............................................................................................................. 3
2- ADJUSTMENTS/ASSEMBLY: ............................................................................................. 4
2.1 Saddle adjustment: .................................................................................................................................... 4
2.1.1 Angle: ................................................................................................................................................. 4
2.1.2 Height: ................................................................................................................................................ 4
2.2 Fork adjustment: ....................................................................................................................................... 5
2.3 Adjusting the hydraulic disc brakes: ....................................................................................................... 6
2.4 Mounting and dismounting the wheels (rear wheels to be handled by a specialist): ............................. 6
2.3.1 Front wheel: .................................................................................................................................... 6
2.3.2 Rear wheel: ..................................................................................................................................... 7
2.4 Lights: ...................................................................................................................................................... 8
3 - USING THE E-BIKE: ......................................................................................................... 9
3.1 Indexed gearshift: .................................................................................................................................... 9
3.2 Electronic gear shifting: .......................................................................................................................... 9
3.2 Display and controls: ............................................................................................................................ 10
3.3 Electric assistance: ................................................................................................................................. 11
3.3.1 Operation: ..................................................................................................................................... 11
3.3.2 Performance:................................................................................................................................... 12
3.3.3 Technical specifications of the power-assistance system:............................................................ 13
3.3.4 The electric motor: ....................................................................................................................... 13
4 – CHARGING THE B ATTERY: ............................................................................................ 14
4.1 NEOMOUV Lithium Ion 48-volt charger .............................................................................................. 14
4.1.1 Precautions (safety instructions): ..................................................................................................... 15
4.1.2 Protecting the charger: ...................................................................................................................... 15
4.2 Battery: ................................................................................................................................................... 16
Recommendations / precautions to take with your battery: ......................................................................... 17
5 - ADVICE FOR INCREASING BATTERY LIFE PER CHARGE: ............................................. 18
6 – UPKEEP AND MAINTENANCE OF YOUR CRONOS: ........................................................ 19
6.1 Upkeep: ................................................................................................................................................... 19
6.2 Lubrication: ............................................................................................................................................ 19
6.3 Maintenance: .......................................................................................................................................... 19
7 - SAFETY – RECOMMENDATIONS: ................................................................................... 20
8 - TECHNICAL DATA .......................................................................................................... 21
9 - DECLARATION OF CE CONFORMITY ............................................................................. 21
10 - CERTIFICATE OF CONFORMITYITY ............................................................................ 21
11 - TERMS OF WARRANTY ................................................................................................ 22
CRONOS Manual
2
Page 3
Thank you for choosing a NEOMOUV Electric-Assisted Bicycle (E-Bike)
Electric motor
Rotation
Serial number
Battery
Display
E-Bike Presentation:
1-PRESENTATION:
sensor
Notes:
• The symbol indicates important advice or essential safety measures. Follow the various instructions.
• Some adjustment and assembly/disassembly operations require special tools and expertise; perform
these only if you have the skills to do so, otherwise consult your authorised dealer or a specialist .
• The symbol indicates the tools you will need to make adjustments.
• Your e-bike has a serial number engraved on the frame by the fork.
MAXIMUM LOAD : 120 KG. FOR YOUR SAFETY, YOU SHOULD NOT EXCEED THE MAXIMUM LOAD WHEN
USING YOUR BICYCLE.
CRONOS Manual
3
Page 4
Nut
Quick release

2- ADJUSTMENTS/ASSEMBLY:

2.1 Saddle adjustment:

6 mm Allen key

2.1.1 Angle:

Loosen the nut under the seat. Adjust the angle of the seat to your most comfortable position. Tighten the nut, with a maximum tightening
torque of 13 Nm.

2.1.2 Height:

The power-assisted bicycle en ables you to opt for a lower saddle po sition than on a classic bike. W ith power assistance, you expend less effort and can be seated in a lower po sition for improved safety. The required user (cyclist) height for optimal utilisation of the bike rang es from 1.65 to 1.90 m. Adjust your saddle height to the optimal sitting position as follows:
Loosen the quick release cl a mp:
clamp
CRONOS Manual
4
Page 5
Safety mark
Fork locking
Wearing suitable cycling shoes, sit on the saddle, place one of the pedals in the lowest position, rest one heel on the pedal, and your leg should rest normally on the pedal without being stretched. Raise o r lower the saddle to get the correct height. While pedalling backwards, you should not have to move your hips from side to side.
To calculate the height, you can also use the SH (Seat Height) formula = 0.885 x IL (inside leg measurement). To measure your inside leg, stand barefoot with your feet five centimetres apart. Without applying too much pressure, place a pole or stick horizontally at groin height and then measure the height from the stick to the ground. This will give you t he IL (inside leg) measurement.
Tighten the quick release clamp.
THE SEAT POST SHOULD NOT BE EXTENDED BEYOND THE ENGRAVED SAFETY MARK (VERTICAL BARS).
The minimum height between the highest point of the saddle and the ground is 85 cm.

2.2 Fork adjustment:

The Cronos’s fork is adjustable and lockab le. Locking is carried out by us ing the red thumbwheel at the top of the fork. The firmness of the suspension is adjusted by using the thumbwheel on the other shoulder of the fork.
thumbwheel
CRONOS Manual
5
Page 6
Disc
Pad

2.3 Adjusting the hydraulic disc brakes:

Your e-bike is equipped with front and rear hydraulic disc brakes. The maintenance of this system must be carried out by a speciali st . However, here are a few recommendations:
- Periodically check the conditi on of the lining on the brake pads. It is important to avoid leaving this until the last minute, because if the lining is damaged, the disc rubs against the metal of the pads which damages them. Here are 2 ways to monitor the wear and tear on your pads:
• By sound: the braking sound will be more metallic when the lining is worn.
• By sight: you can see the thickness of the lining when looking from the front of the calliper.
- Regularly check the co ndition o f the discs to ensure t hey are clean and not too worn. Only use alcohol or water to clean the discs.
- Completely avoid any contact with greasy substances on the disc and the pads.
The pads must
always be changed should this occur (they are porous and wil l absor b the greasy substance).
AS A GENERAL RULE, THE HYDRAULIC DISC BRAKING SYSTEM SHOULD NOT BE ADJUSTED BY NON-EXPERTS. WE
RECOMMEND THAT YOU CALL A SPECIALIST SHOULD YOU HAVE ANY DOUBTS ABOUT WHAT TO DO
2.4 Mounting and dismounting the wheels
(rear wheels to be handled by a specialist):
AS A GENERAL RULE, NEVER OPERATE THE BRAKE LEV ERS WHEN A WHEEL IS OFF THE BIKE. THE WHEEL WILL BE
VERY DIFFICULT TO REMOUNT SHOULD THIS HAPPEN.

2.3.1 Front wheel:

.
14 mm open-ended spanner
Dismounting the front wheel:
- First, you must loosen the wheel’s fastenings.
- Once this has been done, slide the wheel forward to remove it.
- Insert a piece of plastic in the calliper (between the two pads).
CRONOS Manual
6
Page 7
Mounting the front wheel:
- Carry out the dismounting operations in inverse order. Check the fastener tightness and alignment of the wheel.
- Once the wheel is in place, operate the brake handle 3-4 times. This al lows the pads to settle correctly.
- Check that the brake disc is properly centred and rotates without fri ction.
- Check that the wheel brakes are working properly.

2.3.2 Rear wheel:

THIS OPERATION SHOULD BE CARRIED OUT BY A PROFESSIONAL; HOWEVER, HERE IS THE PROCEDURE TO
FOLLOW
Tool required: 18 mm open-ended spanner.
Dismounting the rear wheel:
Disconnect the motor (the connector is situated on the right side of the e-bike on the lower hori zontal secti on of the frame}. Cut the Colson cable tie attaching the motor cable to the frame if necessary.
Remove the right and left wheel nut covers. Loosen the nuts. Remove the nuts and the wheel axle washers. Move the wheel forward to remove it from the frame and remove the chain from the wheel axle.
Insert a piece of plastic in the calliper (between the two pads).
Remove the plastic piece from the calliper. Take the wheel and place the chain on the small pinion on the right-hand side, then place t he wheel between
the brake pads. Moving backwards, insert the wheel axle into the housing on the left and right of the frame. Attach the
washers and the wheel nuts. Tighten the nuts by hand initially until they make contact with the frame. Checking the wheel alignment:
Mounting the rear wheel:
- Centre the wheel in relatio n t o the frame.
- Check the centring and positioning in line with the front wheel, as well as the positi o ning of the chain.
- Screw on the wheel nuts on both sides without tightening them.
- Check the positioning, centring, and position of the chain again.
CRONOS Manual
7
Page 8
Position the two
motor plug
Checking the brake adjustment:
- Operate the brake handle 3-4 times. This allows the pads to settle corr ectly.
- Check that the brake disc is properly centred and rotates without fri ction.
- Check that the wheel brakes are working properly.
Alternately and progressively tighten the wheel nuts on each side (max. tightening torque 25 Nm). Replace the nut covers .
Reconnect the motor and replace the Colson cable tie on the frame (if necessary).
pins correctly to reconnect the

2.4 Lights:

A fixed front light (2 x 2032 batteries) which is activated by a switch on the back of the light.
A battery-operated rear red light (2 x LR03 batteries) which is activated by a s w i t c h on the bottom
of the light.
ALWAYS KEEP YOUR LIGHTS CLEAN AND IN GOOD CONDITION. LIGHTS ARE OBLIGATORY AT NIGHT.
CRONOS Manual
8
Page 9
Assistance level

3 - USING THE E-BIKE:

3.1 Indexed gearshift:

Your gearshift is composed of a derailleur and 9 sprockets.
3 sprockets with 11, 13, and 15 teeth (large development), which allow you to increase your speed
under easy conditions (slight descent, flat).
3 intermediate sprockets with 17, 19, and 21 teeth to use under normal conditions.
3 sprock ets (small development) with 24, 28, and 32 teeth for difficult hills and starts.
There is also a derailleur and 3 front chainrings with 22, 35, and 42 teeth respectively.
The (indexed) speed selectors are located on the handlebars: on the right -hand side for the rear dera illeur, and on the left-hand side for the front derailleur.

3.2 Electronic gear shifting:

Your bike is equipped with 6 levels of electronic assistance:
1. Position 0 = No assistance.
2. Positions 1 and 2 = economic. In these positions, your e-bike will consume less energy, but the
power may not be enough to tackle an incline.
3. Positions 3 and 4 = medium assistance.
4. Position 5 = maximum power. On this position, your e-bike provides you with the most assist ance
but also consumes the most energy.
To scroll through the assistance levels, press the UP and DOWN buttons.
The assistance selector is lo ca ted close to the left handle o n the handlebar.
CRONOS Manual
9
Page 10

3.2 Display and controls:

DOWN Arrow
assistance level
MODE Button (Press for 3 secs)
UP Arrow level
Assistance level
Charge level
Clock
Speed
TIME or ODO
Increases assistance
Decreases
information
Turns system on and off
Start-up ai d 6 km/h: Pressing and holding the DOWN button (located under the control) will initiate a 6 km/h start-up, which enables the e-bike to start without pedalling up to the speed of 6 km/h.
Speed information: Pressing and holding the UP button allows you to select the desired speed information: instantaneous, averag e (avg) or maximum (max).
Night mode: Pressing and holding the UP and MO DE butto ns simultaneously will switch the backlighting on the display on and off.
10
CRONOS Manual
Page 11
Switching from ODO info to TIME info: One quick press on the MODE button allows you to switch between t he two. OD O shows the total numb er of kilometres trave lled since the bike was first used. TRIP shows the number of kilometres travelled on your current journey.
Setting the clock: After selecting the ODO mode, press and hold DOWN and MODE simultaneously until you are able t o access the clock settings. Set the hour using the UP and DOWN buttons. Press briefly on the MODE button to move to the minutes setting. Set the minutes using the UP and DOWN buttons. Press and hold the MODE button to accept your changes and return to normal mode.
Reset trip information (km travelled, average speed, maximum speed): After selecting the TIME mode, press and hold DOWN and MODE s imultaneously to reset th e t rip data to zero.

3.3 Electric assistance:

3.3.1 Operation:

Your Cronos is an electric-assisted bike: it is equipped with an elect ric motor located on the r ear wheel. This motor starts automatically (if the ignition is on and the battery is charged) when and only when you are pedalling (with the exception of the 6 km/h button).
Power assistance is initiated by an electromagnetic detector, which cuts off the motor's power supply as soon as you stop pedalling.
The motor also stops:
• When you use one of the two brakes;
• When you have reached the speed limit of 25 km/h.
This principle enables the motor to give you its full power when you need it and to save battery power when you are descending or on flat g r o und. This type of energy management gives you a longer battery life per charge. T hese functions and the energy management are carried out by an electronic control unit or “controller”.
WE WOULD LIKE YOU TO NOTE THAT ACTIVATION OR DEACTIVATION OF POWER ASSISTANCE MAY LEAD TO
ABRUPT ACCELERATION OR DECELERATION.
CRONOS Manual
11
Page 12

3.3.2 Performance:

The power-assisted speed of your e-bike is limited to 25 km/h. At this speed the motor's power supply is automatically cut off.
The battery life per charge of your bike depends on several factors:
Weight transported:
The expected performance of your bike is based on an average load of 75 kg.
External temperature:
The expected performance of your bike is based on an external temperature of roughly 20°C. Performance decreases belo w this temperature, but is only really discernible below 5°C.
Battery wear:
Your battery is des igned to deliver stable performance f or 750 charge/di scharge cycles (or an average use of 3 years). The battery will still be operational after those 750 cycles, but its performance and therefore your range per charge will decrease proportionally.
But the battery life per charge mainly depends on how you use the bike:
The theoretical battery life per charge is based on almost continuous use of the motor over flat or slightly undulating ground (10 to 20% slopes). If your travel is on flat ground and includes a number of descents (even if slig ht), your batt ery life is increased. If you are ascending incli nes of more than 5% (the motor “struggles" above a grade of 8%), your battery life will diminish proportionally.
CRONOS Manual
12
Page 13
Electric motor

3.3.3 Technical specifications of the power-assistance system:

Motor: Brushless type – 250 watts Battery: 48 V lithium ion cell – 500 Wh or 680 Wh Life cycle: 750 complete charge/discharge cycles under normal load conditions. Battery life per charge: 70 to 80 km and 100 to 120 km
(for a user weighing 75 kg at a speed of 18 km/h on a journey in Eco mode).

3.3.4 The electric motor:

Located in the hub of the rear wheel, it is a 250-watt BRUSHLESS electric mot or. It requires no maintenance on your part and has the benefit of a two-year manufacturer's warrant y. After 3 years or 25,000 kilometres, we advise you to get it checked by an authorised deal er or specialist. Although it is designed to resist wat er, we do not recommend cleaning it with a high-pressure jet.
CRONOS Manual
13
Page 14
48-volt model
JCLC109V55
Smart charger for a Lithium Ion battery
Voltage
AC100V-240V
Frequency
47-63 Hz
Charging voltage (load)
54.6 V
Output current
2.0 A
LED power indicator: red
Charging
LED charge indicator: green
Charged or disconnected from
the battery
Efficiency (at full load)
100 %
Operating temperature range
Between 10° C and 35° C
Humidity
<+ 90 %
Safety standard
EN60335 –1: 2012 + A11 + A13
Weight
300 g

4 – CHARGING THE BATTERY:

4.1 NEOMOUV Lithium Ion 48-volt charger

CHARGER FEATURES
The charger that comes with your bike is compliant with CE manufacturing standard s, and with the IEC/EN 60335-1 environmental protection standards. It has been specially designed to recharge the battery of your electric bike. It will fully recharge your battery in 4 to 6 hours dependent on the ambient temperature and wear of the battery. This charging time, referred to as “slo w”, is deli bera te in ord er to prese rve t he life o f your battery.
It is easy to operate: plug the charger’s output jack into your battery’s socket, then plug it into the mains. Your charger has an LED charging diode that shows the batt ery charge level. It is red when the battery is
charging and changes to green once the battery had been charged.
CRONOS Manual
14
Page 15

4.1.1 Precautions (safety instructions):

• Do not connect the charger plug to the mains with wet hands (ri s k o f electrocution).
• All charging must be carried out i n a ventilat ed area.
• Always check that the charger is compatible with the local power supply.
• Do not place the apparatus in a damp environment or near a flammable or explosive substance while it
is charging (any charge that generates heat involves the risk of fire or explosion).
• Do not store the apparatus while it is hot.
• Do not charge a faulty or worn-out battery.
• Do not leave a plugged-in charger and its connections within the reach of children.
• Do not attempt to disassemble the char ger.

4.1.2 Protecting the charger:

• Do not expose it to rain.
• Do not leave the charger disconnected fro m the power supply (220 volts) but plugged into the battery.
• Do not submerge the charger.
• Do not place any objects on the charger or cov er it.
• Look after the charger’s input and output cables.
• To protect the charger after a long charg i ng period (more t han 24 hours), disconnect t he elect ri cal
connection and let the device rest in a dry and ventilated space.
• Avoid leaving the charger connected to the mains for more than 24 hours.
 WARNING! FOR YOUR SAFETY, OPENING THE CHARGER IS PROHIBITED (RISK OF ELECTRIC SHOCK – HIGH
VOLTAGE
FOR YOUR SAFETY, ALSO LOOK AT THE PICTOGRAMS ON THE BACK OF THE CHARGER.
). CONTACT YOUR DEALER SHOULD ANY FAULTS OCCUR WITH YOUR CHARGER.
1) Compliance with CR standards
2) Double insulation
3) Do not throw out with household waste
4) Comply with the polarity
CRONOS Manual
15
Page 16
Battery lock

4.2 Battery:

Your battery has a serial number. This can be found underneath the battery.
Your battery is as semb l ed in a sp ec ia l cont ainer. We strongly r eco mme nd tha t yo u do not at t e mpt t o op en or disassemble it. Any bre aking of the warrant y label will automatically render the warranty null and
void.
To remove the battery from its housing, you must open the lock using the key and push the battery to the right of the bike.
To put the battery back, you must first position the base correctly and then rock the battery back into its housing.
You can charge your battery while it is on the bike or remove it from its holder and then charge it, always using the plug located at the back of it. For safe charging, first connect the charger to the battery and then connect the charger's standard plug to the mains (220V/50 Hz). Check that the charg er is work ing correctly (see sectio n 4.1).
CRONOS Manual
16
Page 17
Also read carefully the indications listed on the battery:

Recommendations / precautions to take with your battery:

• Avoid any proximity to sources of heat.
• Avoid any short circuits on the motor’s charg i ng and plug connections.
• Only use the battery for its intended purpos e.
• Do not expose the battery to temperatures higher than 40°C and lower than –20° C.
• Never drop the battery; put it in a stabl e place.
• Warning! There is a risk of short circuiting and overheating in the event of any impact on batteries that
are particularly fragile.
• Always check that the charger is compatible with the local power supply.
• When charging is finished, it is recommended that yo u disconnect t he charger from the b attery.
• During periods when the bike is not in use, store the battery in a cool, dry place at a
temperature above 10° C and lower than 40° C.
• Never leave your battery completely discharged for longer than 3 days, as this may damage it.
• In case of prolonged non-use, you must recharge the battery once every two months.
• Never leave the battery exposed to the sun for long periods of time.
• Never let a child play with or handle the battery.
• Never charge the battery in the rain or in damp surroundings.
• Never open the battery. Opening it may lead to a significant risk of electrocution and void the
warranty.
• Never spray the battery directly with water or any other liquid.
• Never submer ge the battery.
• Only use the charger provided to charge your battery. Using any other charger that is not adapted for
the battery may result in an accident.
WARNING! IN CASE OF VERY INFREQUENT USE OF THE BATTERY (ONCE EVERY 2 MONTHS ONLY), THE
BATTERY’S CAPACITY WILL DIMINISH MUCH MORE RAPIDLY THAN WITH REGULAR USE. THE BATTERY’S ENERGY COMES FROM A CHEMICAL REACTION T HAT REQUIRES SUFFICIEN TLY REGULAR ACTIVATION TO MAINTAIN ITS EFFECTIVENESS.
WARNING! YOU MUST NOT THROW YOUR BATTERY OR CHARGER OUT WITH YOUR HOUSEHOLD WASTE. A
SELECTIVE COLLECTION SYSTEM FOR THIS TYPE OF PRODUCT HAS BEEN SET UP IN MOST TOWNS CONTACT YOUR LOCAL COUNCIL FOR FURTHER INFORMATION. ELECTRICAL AND ELECTRONIC PRODUCTS CONTAIN TOXIC SUBSTANCES THAT ARE HARMFUL TO THE ENVIRONMENT AND HUMAN HEALTH AND THEREFORE MUST BE RECYCLED.
; YOU CAN
Your battery is recyclable after use. Return it to your dealer.
The battery provided with your e-bike conforms with:
• Standards EN61000-6-1 et EN61000-6-3;
• Directive UN38.3 on the transport of dangerous goods;
• Directive 2006/66/EC.
CRONOS Manual
17
Page 18

5 - ADVICE FOR INCREASING BATTERY LIFE PER CHARGE:

Depending on the battery in your Cronos, the charged battery range is 70 to 80 km (500-Wh battery) or 100 to 120 km (680-Wh battery) for a user weighing 75 kg at a an average speed of 18 km/h on a journey in Eco mode. In order to conserve your battery's energy and thus increase the range of your bike, we would like to offer you a few tips.
• At start-up: s et po w er ass ist an ce to posit io n 1 and choose a medium devel opment on the derailleur. If your route is uphill, position the derailleur on the small development and use the 6 km /h p osition.
• In traffic jam s: set power assistance to posi t ion 1 and your derailleur to small or medium development according to the frequency of the stops you will hav e to make.
• Hill start: before you stop, set your derailleur to small develop m ent, and set the power ass is tance according to the incline.
• Climbing a tougher hill: if you are cl i mbing a hill and the speed r educes too much, you can opt for more powerful assistance. You will then feel the power assistance increase. If this is insufficient, set your derailleur to the small d ev elop m ent (yo ur en ergy co nsump t ion wi ll be gre at er and yo ur battery range will be reduced).
• Route without stops: if your route has no o bstacles (no t ra ffic lig hts, traffic jams or rough roads), you can set your bike to cruis ing speed. Pick you r assist ance level and set th e derailleur to the large development. This will allow you to go faster while saving energy.
• Descending: you stop pedalling (freewheeli ng) or yo u pedal normally but without effort while adapting your speed selection a n d you let yourself move steadily.
• To prolong battery power: start up in position 1. Once your bike has started, set your assi stance level and s et the derailleur to the large development. Maintain a constant speed. Your b attery charge will last longer.
CRONOS Manual
18
Page 19

6 – UPKEEP AND MAINTENANCE OF YOUR CRONOS:

6.1 Upkeep:

To keep your bike in good working order, maintain it regularly:
- Replace the brake pads as soon as they become worn.
- Clean your bike regularly with a sponge and soapy water.
- Do not use detergent or petro l , or a high-pressure jet spray.
- Clean and lubricate the bearings every 6 months.
When you are cleaning your bike, take particular care:
To clean, rinse, and dry the different parts of the bike, and wipe off any st anding water to av oid the risk of early corrosion.

6.2 Lubrication:

Lubricate lightly and regularly (about once a month):
- The chain

6.3 Maintenance:

Like any mechanical component, a bicycle is also subject to stress and wear. Different materials and components may react differently to wear or erosion.
If the lifespan of a component has been exceeded, i t may break suddenly, potentially causing injury to the rider. Cracks, scratches, and discolouration in areas that are subjected to high stress indicate that the component has exceeded its lifespan and should be replaced.
DO NOT USE LUBRICANTS ON THE SURFACE OF THE WHEEL RIMS OR ON THE TYRES, OR ON THE FRONT AND REAR
BRAKE SHOES.
CHECK THE CONDITION AND CORRECT FUNCTIONING OF THE SIGNALLING DEVICES (E.G., BULBS, ETC.), AND
CLEAN THEM IF NECESSARY WITH A DRY CLOTH.
CRONOS Manual
19
Page 20

7 - SAFETY – RECOMMENDATIONS:

Regularly check the following:
• The tightness of the wheel nuts (25 Nm for the front, 25 Nm for the rear).
• Tyre wear (replace t he tyre as soon as the wear indicator has been reached) and adjust the pressure to
between 60 and 65 psi (2.8 to 4.5 bars). Your bicycle’s tyres are compatible with the rim base, so no modifications must be made to these. Only the appropriate spare parts (tyres, inner tubes, brake friction elements, etc.) are t o be used. Contact your dealer for more information.
• Check the tightness of the handlebars (6 Nm), pedals (20 Nm), and saddle (6 Nm).
Because of its weight and motor inertia, allow ample distance for braking your e-bike, especially in wet weather.
Your e-bike is adapted for use in cities and on road trips. On public roads, everybody who rides a bike must respect and apply the provisions of the highway code of the
country they are in as well as the legal requirements for this type of transport. (e.g., lights, signalling, wearing a helmet (recommended), r ef l ective devices, etc.).
For the safe use of your b ike, we recommend periodically checking a nd inspecting: the brakes (wear on the pads), the condition of the wheel rims and spokes (wear on the wheel rims and spokes), the condit ion of the tyres, the steeri ng (fastenings, tightness of the wheel nuts) and all other parts specific to your vehicle. The wheel rims must be smooth, without any cracks, breakag e, or deformit ies. If you notice any anomaly with the wheel rims, please get them checked immediately. WARNING! Like any mechanical component, a bicycle is also subject to high levels of stress and wear. Different materials and components may react differently to wear or erosion. If the predicted lifespan of a component has been exceeded, it may break suddenly, potentially causing injury to the rider. Cracks, scratches, and discolouration in areas that are subjected to high stress indicate that the component has exceeded its lifespan and should be replaced.
For your safety, it is equally important to replace any critical component s that are showing signs of wear or any other problem (e.g., tyres, wheel rims, etc.) with genuine parts. Contact your dealer.
DO NOT SIT ON THE BIKE WHEN IT IS O N ITS STAND, AS T HERE IS A RISK THAT IT MAY BRE AK AND YOU CO ULD
HAVE AN ABRUPT FALL.
Stay alert; do not spend too much time looking at the bike’s display while you are driving. For your safety, it is recommended to routinely have the bike lights on.
We strongly recommend that you wear a helmet. Wearing a high-visibility vest is mandatory when riding in traffic at night, or on days when the visibility is poor.
CRONOS Manual
20
Page 21
Pedal axle 40
Pedals 20
Front wheel axle 25
Rear wheel axle 25
Seatpost 6
Stem and handlebar 6
Saddle angle 13
Distance between t he wheels 1200 mm
Total weight (battery included) 22 kg
Maximum load allowed 120 kg
Maximum speed in assistance mode 25 km/h
Battery range 70 to 80 km for 500 Wh
(for a user weighing 75 kg riding at an average speed of 18 km/h in Eco mode)
Battery: Lithium Ion 750 cycles
Voltage 48 V
Motor: Brushless
Nominal yield 250 watts
Charger voltage 42 V
Tyre dimensions 27.5’
Tyre pressure 2 and 3 bars
SHIMANO derailleur (indexed control)
Development 11, 13, 15, 17, 19, 21, 24, 28, 32
(number of teeth on the sprockets)
+ 3 front chainrings (number of t eet h) 22, 32, and 42

8 - TECHNICAL DATA

FITTINGS MAX. TIGHTENING TORQUE
CHARACTERISTICS
MODEL CRONOS
100 to 120 km for 680 Wh

9 - DECLARATION OF CE CONFORMITY

Available on our website, under the heading “Downloads”

10 - CERTIFICATE OF CONFORMITYITY

Available on our website, under the heading “Downloads”
CRONOS Manual
21
Page 22

11 - TERMS OF WARRANTY

Keep your receipt as it i s your proof of purchase. Keep the original of your warranty certificate that has been duly completed, signed and stamped by the
dealer. In the event of a complaint, the buyer must return the bike in its entirety (keys, battery, charger) to the shop where it was purchased, along with the aforementioned certificate. Repairs can only be made at th e point of sale wher e you purchased your e-bike or by an authorised agent (contact us at the address below for a list). Failure to respect these terms or modification of the technical specifications will automatically void the warranty.
The warranty will be declined if damage is due:
• T o a lack of upkeep, or faulty o r inco mplete ass embly;
• T o abnormal use (carrying a passenger, overloading, jumps) even if fleetingl y;
• To poor adjustments by the user.
The warr anty do es not incl ude no rmal wear and tear t o part s suc h as: brake pads, cables, chain, bulbs, tyres, inner tubes, etc. The warranty is not valid for use in competition.
Length of warranty:
• 5 years fo r t he frame
• 2 years for t he other parts
• 2 years fo r t he batt ery
Any periods of immobilisation lasting longer than 7 days during the warranty period will extend the warranty by the duration of this period of immobilisation. The warranty does not entitle you to any compensation in cash or kind for the immobilisation of the bi ke during the warranty period.
Moreover, you will al so b en efi t fro m th e le gal gu ar ant ee, in acc orda nce with the provisions of the civi l code . The warranty and after-sales service are provided by the point of sale at which the bike was purchased. They can also provide you with any inf orm at i on you may need on the use and m ain ten ance of you r bike.
The warranty does not cover damage due to misuse, failure to respect safe practices, or accidents, nor does it cover improper or commercial use of the bike. This bike is f or personal and non-professional use only.
Each electronic component i s completely sealed. Opening one of these components (battery, screen, motor, controller, etc.) may affect the physical int egrity of the individual or the system. Opening or modifying one of the components will void the bike's warranty. The warranty does not cover parts that are cracked or broken or show traces of visi ble impact.
WARNING! Do not confuse maintenance and warranty. Maint enance overhauls and adjustments cannot be carried out for free under the warranty.
Fill out your CERTIFICATE OF WARRANTY ON OUR WEBSITE www.neomouv.fr
CRONOS Manual
22
Page 23
Page 24
SAS NEOMOUV
NEOMOUV - reproduction is prohibited. NEOMOUV is a registered trademark. The manufacturer reserves the right to
modify the characteristics of its products in order to make technical improvements or comply with new regulations.
ZI Ouest - Allée des quatre Journaux
72200 LA FLECHE
SAS with capital of 1 200 000- RCS Le Mans 518 158 183
SIRET 518 158 183 000 13 – APE 4649Z – TVA INT FR 91 518158183
Loading...