Nemco 886302, 886303, 88670, 886301, 88650 Specifications

...

FOOD EQUIPMENT

ONLY FROM

Buy once. Buy the original.

Always look for this mark of quality

OneLid

No more messy lids or lid messes! Keep your beverage stations organized and your lid stacks free from contamination—saving your employees time and saving you money.

Beverage Lid Dispensing Systems

FOOD EQUIPMENT

Put A Lid on Wasted Product

Fact: Customers are messy.

They spill lids on the floor. They splatter liquids. They sneeze. All of which can render your supply of beverage lids unsanitary and unsafe, costing you extra money and unnecessary clean-up. But not anymore—not with the Nemco OneLid® Dispensing System!

Simple, but Amazingly Effective Design

• No electronics or over-engineering—uses only gravity and friction to dispense one lid at a time.

• A completely closed-stack environment keeps your self-service stations organized, your beverage lids free from contamination and your customers from grabbing extra lids from the pile.

• Just load and walk away—a clear plastic panel safeguards your lid-stacks from drink spills, splashes, dirt, dust and other airborne contaminants.

• No longer do you or your staff have to monitor lid mess.

Durable and Lasting

• Easy to assemble, hard to break. Features no springs, nuts, or bolts which may eventually break or need replacing.

• Constructed of ABS plastic, ensuring a long lifetime of service.

• Super easy to clean!

Adapts to Your Beverage Station

1. Multiple Configurations—Choose your preferred base (vertical or slanted),

size (small, medium or large) and number of lid stacks (one, two, or three). Then choose any additional organizers you might need.

2. Modular Setup—Like Lego™ blocks, OneLid components are modular, so you

can build a custom setup that fits your space and meets your customers’ needs.

3. Optional Accessories—Need additional organizers for straws, stirrers,

sweeteners or condiment packets? OneLid’s optional accessories will keep your self-service counters or beverage stations in order.

Suggested Uses:

Welcome wherever a lid mess can result in a service-logjam, OneLid is particularly well-suited for soda fountains in C-stores, fast-casual restaurants, concessions or any other operation where customers or low-skill staff dispense drinks.

General Specifications

Model Description Size

88600* Single Dispenser, Small 41/4" x 43/8" x 21" 88610* Single Dispenser, Medium 4 88620* Single Dispenser, Large 5 88630-1 Base, Single 5 88630-2 Base, Dual 9 88630-3 Base, Triple 15" x 8 88630-4 Base, Quad 19 88640 Compact Holder, Vertical 10 88650 Condiment Organizer,

Horizontal 14 88660 Condiment Organizer,

Vertical 5 88670 Straw Organizer 5

Replacement parts are available through Nemco’s 24-hour Zip Program.

Nemco reserves the right to make design, specification or model changes without notice.

(W x D x H)

/8" x 5" x 21"

/4" x 57/16" x 21"

/4" x 811/16" x 9/16"

/2" x 81/2" x 9/16"

/2" x 9/16"

/4" x 81/2" x 9/16""

/4" x 131/2" x 221/2"

/8" x 101/2" x 63/16"

/4" x 53/8" x 21"

/16" x 53/8" x 83/8"

OneLid works with a majority of the beverage lids on the market

ABS plastic construction will last for years

Attachable accessories keep straws, condiments, etc. organized

Base options allow for vertical or slanted (shown)

Clear plastic panels protect lid stacks from contamination

Body weighs less than

3.3 lbs fully loaded

Bottom slot dispenses one lid at a time to reduce lid waste.

Corporate HQ 301 Meuse Argonne | Hicksville, OH 43526

800.782.6761 • 419.542.7751 • f: 419.542.6690 Nemco West Distribution Center/Test Kitchen

4300 E Magnolia Street | Phoenix, AZ 85034

NemcoFoodEquip.com

Printed 10/17. Printed in the USA.