29.2 General installation instructions....................
..41
1 Safety
Observe the following safety instructions.
1.1 General information
¡ Read this instruction manual carefully.
¡ Keep the instruction manual and the
product information safe for future reference or for the next owner.
¡ Do not connect the appliance if it has been
damaged in transit.
1.2 Intended use
This appliance is designed only to be built
into kitchen units. Read the special installation
instructions.
Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under the
warranty.
Only use this appliance:
¡ To prepare meals and drinks.
¡ For household use and similar applications,
such as: In kitchens for employees in
shops, offices and other commercial sectors; in agriculture; by customers in hotels
and other residential facilities; in bed and
breakfasts.
¡ up to an altitude of max. 4000m above
sea level.
This appliance complies with the standards
EN 55011 and CISPR 11. It is a group 2,
class B product. Group 2 means that microwaves are produced for the purpose of
heating food. Class B means that the appliance is suitable for private households.
1.3 Restriction on user group
This appliance may be used by children aged
8 or over and by people who have reduced
physical, sensory or mental abilities or inad-
2
Safety en
equate experience and/or knowledge,
provided that they are supervised or have
been instructed on how to use the appliance
safely and have understood the resulting
dangers.
Do not let children play with the appliance.
Children must not perform cleaning or user
maintenance unless they are at least 15 years
old and are being supervised.
Keep children under the age of 8 years away
from the appliance and power cable.
1.4 Safe use
Always place accessories in the cooking compartment the right way round.
→"Accessories", Page12
WARNING‒Risk of fire!
Combustible objects that are left in the cooking compartment may catch fire.
▶ Never store combustible objects in the
cooking compartment.
▶ If smoke is emitted, the appliance must be
switched off or the plug must be pulled out
and the door must be held closed in order
to stifle any flames.
Loose food remnants, fat and meat juices
may catch fire.
▶ Before using the appliance, remove the
worst of the food residues and remnants
from the cooking compartment, heating ele-
ments and accessories.
Opening the appliance door creates a
draught. Greaseproof paper may come into
contact with the heating element and catch
fire.
▶ Never place greaseproof paper loosely
over accessories when preheating the ap-
pliance and while cooking.
▶ Always cut greaseproof paper to size and
use a plate or baking tin to hold it down.
WARNING‒Risk of burns!
The appliance and its parts that can be
touched become hot during use.
▶ Caution should be exercised here in order
to avoid touching heating elements.
▶ Young children under 8 years of age must
be kept away from the appliance.
Accessories and cookware get very hot.
▶ Always use oven gloves to remove ac-
cessories or cookware from the cooking
compartment.
When the cooking compartment is hot, any alcoholic vapours inside may catch fire. The appliance door may spring open. Hot steam and
jets of flame may escape.
▶ Only use small quantities of drinks with a
high alcohol content in food.
▶ Do not heat spirits (≥ 15% vol.) when undi-
luted (e.g. for marinating or pouring over
food).
▶ Open the appliance door carefully.
The telescopic shelves become hot when the
appliance is in use.
▶ Allow hot telescopic shelves to cool down
before touching them.
▶ Only touch hot telescopic shelves with
oven gloves.
WARNING‒Risk of scalding!
The accessible parts of the appliance become
hot during operation.
▶ Never touch these hot parts.
▶ Keep children at a safe distance.
Hot steam may escape when you open the
appliance door. Steam may not be visible, depending on the temperature.
▶ Open the appliance door carefully.
▶ Keep children at a safe distance.
If there is water in the cooking compartment
when it is hot, this may create hot steam.
▶ Never pour water into the cooking compart-
ment when the cooking compartment is
hot.
WARNING‒Risk of injury!
Scratched glass in the appliance door may
develop into a crack.
▶ Do not use any harsh or abrasive cleaners
or sharp metal scrapers to clean the glass
on the oven door, as they may scratch the
surface.
The appliance and its parts that can be
touched may have sharp edges.
▶ Take care when handling and cleaning
them.
▶ If possible, wear protective gloves.
The hinges on the appliance door move when
the door is opened and closed, which could
trap your fingers.
▶ Keep your hands away from the hinges.
Components inside the appliance door may
have sharp edges.
▶ Wear protective gloves.
3
en Safety
WARNING‒Risk of electric shock!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
▶ Only use genuine spare parts when repair-
ing the appliance.
▶ If the power cord of this appliance is dam-
aged, it must be replaced by the manufacturer, the manufacturer's Customer Service
or a similarly qualified person in order to
prevent any risk.
If the insulation of the power cord is damaged, this is dangerous.
▶ Never let the power cord come into contact
with hot appliance parts or heat sources.
▶ Never let the power cord come into contact
with sharp points or edges.
▶ Never kink, crush or modify the power
cord.
An ingress of moisture can cause an electric
shock.
▶ Do not use steam- or high-pressure clean-
ers to clean the appliance.
If the appliance or the power cord is damaged, this is dangerous.
▶ Never operate a damaged appliance.
▶ Never pull on the power cord to unplug the
appliance. Always unplug the appliance at
the mains.
▶ If the appliance or the power cord is dam-
aged, immediately unplug the power cord
or switch off the fuse in the fuse box.
▶ Call customer services. →Page31
WARNING‒Risk of suffocation!
Children may put packaging material over
their heads or wrap themselves up in it and
suffocate.
▶ Keep packaging material away from chil-
dren.
▶ Do not let children play with packaging ma-
terial.
Children may breathe in or swallow small
parts, causing them to suffocate.
▶ Keep small parts away from children.
▶ Do not let children play with small parts.
1.5 Microwave
CAREFULLY READ THE IMPORTANT SAFETY
INSTRUCTIONS AND KEEP THEM SAFE FOR
FUTURE USE
WARNING‒Risk of fire!
Using the appliance for anything other than its
intended purpose is dangerous and may
cause damage. For example, heated slippers
and pillows filled with grain or cereal may
catch fire, even several hours later.
▶ Never dry food or clothing with the appli-
ance.
▶ Never heat up slippers, pillows filled with
grain or cereal, sponges, damp cleaning
cloths or similar with the appliance.
▶ The appliance must only be used to pre-
pare food and drink.
Food and its packaging and containers may
catch fire.
▶ Never heat food in heat-retaining pack-
aging.
▶ Do not leave food unattended while it is
heating in containers made of plastic, pa-
per or other combustible materials.
▶ Never set the microwave power too high or
the cooking time too long. Follow the in-
structions provided in this user manual.
▶ Never use the microwave to dry food.
▶ Never defrost or heat food with a low water
content, such as bread, at too high a mi-
crowave power or for too long.
Cooking oil may catch fire.
▶ Never use the microwave to heat cooking
oil on its own.
WARNING‒Risk of explosion!
Liquids and other food may easily explode
when in containers that have been tightly
sealed.
▶ Never heat liquids or other food in contain-
ers that have been tightly sealed.
WARNING‒Risk of burns!
Foods with peel or skin may burst or explode
during heating, or even afterwards.
▶ Never cook eggs in their shell or heat hard-
boiled eggs in their shell.
▶ Never cook shellfish or crustaceans.
▶ Always prick the yolk of eggs before mi-
crowaving.
▶ The skin of foods that have a peel or skin,
such as apples, tomatoes, potatoes and
sausages, may burst. Before heating, prick
the peel or skin.
Heat is not distributed evenly through baby
food.
▶ Never heat baby food in closed containers.
4
Safety en
▶ Always remove the lid or teat.
▶ Stir or shake well after heating.
▶ Check the temperature before giving the
food or drink to a child.
Heated food gives off heat. The cookware
may become hot.
▶ Always use oven gloves to remove cook-
ware or accessories from the cooking com-
partment.
Airtight packaging may burst when food is
heated.
▶ Always follow the instructions on the pack-
aging.
▶ Always use oven gloves to remove the
dishes from the cooking compartment.
The accessible parts of the appliance become
hot during operation.
▶ Never touch these hot parts.
▶ Keep children at a safe distance.
At the highest settings in microwave only
mode, the drying function will automatically
switch on an additional heating element to
heat the cooking compartment.
▶ Never touch the inside surfaces of the
cooking compartment or the heating ele-
ments while they are hot.
▶ Keep children at a safe distance.
Using the appliance for anything other than its
intended purpose is dangerous. This is because, for instance, overheated slippers, pillows filled with grain or cereal, sponges and
damp cleaning cloths, etc., may cause burns
to the skin.
▶ Never dry food or clothing with the appli-
ance.
▶ Never heat up slippers, pillows filled with
grain or cereal, sponges, damp cleaning
cloths or similar with the appliance.
▶ The appliance must only be used to pre-
pare food and drink.
WARNING‒Risk of scalding!
There is a possibility of delayed boiling when
a liquid is heated. This means that the liquid
reaches the boiling temperature without the
usual steam bubbles rising to the surface. Exercise caution even when only gently shaking
the container. The hot liquid may suddenly
boil over and splatter.
▶ Always place a spoon in the container
when heating liquids. This prevents delayed
boiling.
WARNING‒Risk of injury!
Unsuitable cookware may crack. Porcelain or
ceramic cookware can have small perforations in the handles and lid. These perforations conceal a cavity below. If moisture penetrates this cavity, it could cause the cookware to crack.
▶ Only use microwave-safe cookware.
Cookware and containers made from metal or
cookware with metal edging may lead to
sparks being formed during simple microwave operation. The appliance is damaged.
▶ Never use metal containers during mi-
crowave-only operation.
▶ Only use microwave-safe cookware or use
the microwave in combination with a type
of heating.
WARNING‒Risk of electric shock!
The appliance uses a high voltage.
▶ Never remove the casing.
WARNING‒Risk of serious harm to
health!
Inadequate cleaning may destroy the surface
of the appliance, reduce its service life, and
lead to dangerous situations, such as escaping microwave energy.
▶ Clean the appliance on a regular basis,
and remove any food residue immediately.
▶ Always keep the cooking compartment,
door seal, door and door stop clean.
→"Cleaning and servicing", Page23
5
en Preventing material damage
Never operate the appliance if the cooking
compartment door or the door seal is damaged. Microwave energy may escape.
▶ Never use the appliance if the cooking
compartment door, the door seal or the
plastic door frame is damaged.
▶ Any repair work must only be carried out
by customer service.
Preventing material damage
2 Preventing material damage
2.1 General
ATTENTION!
Alcoholic vapours may catch fire in the hot cooking
compartment and cause permanent damage to the appliance. The appliance door may spring open due to
an explosion and it may fall off. The door panels may
shatter and fragment. Due to the resulting negative
pressure, the cooking compartment may become considerably deformed inwards.
▶ Do not heat spirits (≥ 15% vol.) when undiluted (e.g.
for marinating or pouring over food).
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120°C, this will damage the enamel.
▶ Do not use the appliance if there is water on the
cooking compartment floor.
▶ Wipe away any water on the cooking compartment
floor before operation.
Objects on the cooking compartment floor at over
50°C will cause heat to build up. The baking and
roasting times will no longer be correct and the enamel
will be damaged.
▶ Do not place any accessories, greaseproof paper or
foil of any kind on the cooking compartment floor.
▶ Only place cookware on the cooking compartment
floor if a temperature under 50°C has been set.
When the cooking compartment is hot, any water inside it will create steam. The change in temperature
may cause damage.
▶ Never pour water into the cooking compartment
when it is still hot.
▶ Never place cookware containing water on the
cooking compartment floor.
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
▶ Allow the cooking compartment to dry after use. To
do this, open the cooking compartment door com-
pletely or use the drying function.
▶ Do not keep moist food in the cooking compartment
for a long time with the door closed.
▶ Do not store food in the cooking compartment.
▶ Take care not to trap anything in the appliance
door.
Fruit juice dripping from the baking tray leaves stains
that cannot be removed.
▶ When baking very juicy fruit flans, do not pack too
much on the baking tray.
▶ If possible, use the deeper universal pan.
Microwave energy will escape from appliances that do not have any casing.
▶ Never remove the casing.
▶ For any maintenance or repair work, con-
tact the customer service.
Using oven cleaner in a hot cooking compartment
damages the enamel.
▶ Never use oven cleaner in the cooking compartment
when it is still warm.
▶ Remove all food remnants from the cooking com-
partment and the appliance door before you next
heat up the appliance.
If the seal is very dirty, the appliance door will no
longer close properly during operation. This may damage the front of adjacent kitchen units.
▶ Keep the seal clean at all times.
▶ Never operate the appliance if the seal is damaged
or missing.
Sitting or placing objects on the appliance door may
damage it.
▶ Do not place, hang or support objects on the appli-
ance door.
▶ Do not place cookware or accessories on the appli-
ance door.
With certain models, accessories may scratch the door
pane when closing the appliance door.
▶ Always push accessories fully into the cooking com-
partment.
If aluminium foil comes into contact with the door pane,
it could cause permanent discolouration.
▶ Do not allow aluminium foil in the cooking compart-
ment to come into contact with the door pane.
2.2 Microwave
Follow these instructions when using the microwave.
ATTENTION!
Metal touching the wall of the cooking compartment
will cause sparks, which may damage the appliance or
the inner door pane.
▶ Metal (e.g. a spoon in a glass) must be kept at least
2cm from the cooking compartment walls and the
inside of the door.
Using accessories directly on top of one another
causes sparks.
▶ Do not combine the wire rack with the universal
pan.
▶ Always place accessories on different levels.
The universal pan and baking tray are not suitable for
use with microwave-only mode. Using either of these
may create sparks, which will damage the cooking
compartment.
▶ Place accessories on the wire rack supplied.
Placing aluminium containers in the appliance may
cause sparks, which will damage the appliance.
▶ Do not use aluminium containers in the appliance.
6
Environmental protection and saving energy en
Operating the appliance without food in the cooking
compartment may lead to overloading.
▶ Do not switch on the microwave unless there is food
inside. The only exception to this rule is when performing a short cookware test.
Environmental protection and saving energy
If you prepare microwave popcorn at a microwave
power level that is too high, the door pane may crack
due to overloading.
▶ Never set a microwave power level that is too high.
▶ Use a maximum microwave output of 600 watts.
▶ Always place the popcorn bag on a glass plate.
3 Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compatible and can be recycled.
▶
Sort the individual components by type and dispose
of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less power.
Only preheat the appliance if the recipe or the recommended settings tell you to do so.
→"How it works", Page32
Not preheating the appliance can reduce the en-
¡
ergy used by up to 20%.
Use dark-coloured, black-coated or enamelled baking
tins.
These types of baking tin absorb the heat particu-
¡
larly well.
Open the appliance door as little as possible during
operation.
This maintains the temperature in the cooking com-
¡
partment and eliminates the need for the appliance
to reheat.
When baking multiple dishes, do so in succession or
in parallel.
The cooking compartment is heated after baking
¡
the first dish. This reduces the baking time for the
second cake.
If the cooking time is relatively long, you can switch
the appliance off 10minutes before the cooking time
ends.
There will be enough residual heat to finish cooking
¡
the dish.
Remove any accessories that are not being used from
the cooking compartment.
Accessories that are not being used do not need to
¡
be heated.
Allow frozen food to defrost before cooking.
This saves the energy that would otherwise be re-
¡
quired to defrost it.
Switch off the display in the basic settings.
→"Basic settings", Page20
Energy is saved when the display is switched off.
¡
Heat two glasses or cups of liquid at the same time.
Heating several dishes at the same time requires
¡
less energy than heating dishes one after the other.
Note:
The appliance requires:
¡ A maximum of2W in networked standby mode
¡ A maximum of 0.5W in non-networked standby
mode with the display switched off
7
en Familiarising yourself with your appliance
1
22
1
2
Familiarising yourself with your appliance
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
On certain models, specific details such as colour and shape may differ from those pictured.
Display
→"Display", Page8
Buttons
→"Buttons", Page8
4.2 Display
You can configure all the functions on your appliance
via the display.
The main menu provides an overview of your appliance's functions.
→"Functions", Page9
Setting values
To adjust a setting, touch the appropriate place on the
display with your finger. The settings area appears on
the display. Swipe left or right over this settings area on
the display with your finger until the required setting is
magnified.
ValuesUse
IncreaseSwipe right on the display with your
finger
DecreaseSwipe left on the display with your
finger
Navigating
DirectionUse
Navigate to the leftSwipe right on the display
with your finger
Navigate to the rightSwipe left on the display
with your finger
4.3 Buttons
The buttons are touch-sensitive areas. To select a function, press the corresponding button.
SymbolNameUse
On/OffSwitch the appliance on or off
Left arrowDecreases the adjustment values
Right arrowIncreases the adjustment values
8
SymbolNameUse
Start/stopStart or pause the appliance
MicrowaveSetting the microwave
Functions en
4.4 Cooking compartment
Various functions in the cooking compartment provide
support when operating your appliance.
Shelf supports
The shelf supports in the cooking compartment enable
you to place accessories at different heights.
→"Accessories", Page12
Your appliance has 3 shelf positions. The shelf positions are numbered from bottom to top.
The shelf supports are equipped with pull-out rails on
one or more levels, depending on the appliance type.
You can remove the shelf supports, e.g. for cleaning.
→"Rails", Page27
If the self-cleaning surfaces no longer clean themselves
adequately during operation, heat up the cooking compartment specifically to the right temperature.
→"Regenerating self-cleaning surfaces in the cooking
compartment", Page25
Lighting
One or more oven lights illuminate the cooking compartment.
When you open the appliance door, the light in the
cooking compartment switches on. If the appliance
door remains open for longer than 15minutes, the light
switches off again.
For most functions, the lighting is switched on during
operation. The lighting switches off again when the operation ends.
Cooling fan
The cooling fan switches on and off depending on the
appliance's temperature. The hot air escapes above
the door.
ATTENTION!
Covering the ventilation slots will cause the appliance
to overheat.
▶ Do not cover the ventilation slots.
To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a
certain period afterwards.
Self-cleaning surfaces
The back panel in the cooking compartment is selfcleaning. The self-cleaning surfaces are coated with a
porous, matt ceramic layer and have a rough surface.
When the appliance is in operation, the self-cleaning
surfaces absorb splashes from roasting or grilling and
break them down.
Functions
If you open the appliance door during operation, the
operation stops. If you close the appliance door, operation resumes automatically.
In microwave mode, if you close the appliance door,
you must continue the operation.
5 Functions
The main menu provides an overview of your appliance's functions.
Tip:Depending on the appliance type, additional or more comprehensive functions are available to you with the
HomeConnect app. You can find more information about this in the app.
FunctionNameUse
Types of heatingSelect the required type of heating and temperature for your food
MicrowaveUse the microwave to cook, heat up or defrost food quickly
→"Microwave", Page15
FavouritesSelect saved favourites
→"Favourites", Page19
DishesUse programmes or recommended settings for various types of food
→"Dishes", Page18
Appliance door
Cleaning
Basic settingsIndividually adjust the appliance settings
¡ Easy Clean removes light dirt from the cooking compartment →"Easy
Clean cleaning aid", Page25
¡ Drying function dries the cooking compartment →"Drying", Page26
→"Basic settings", Page20
9
en Functions
5.1 Heating functions
This is where you will find an overview of the types of heating. You will find recommendations for using the types of
heating.
For temperatures above 275°C, the appliance reduces the temperature to approx. 275°C after around 40minutes.
SymbolHeating functionTemperatureUse
Circo Therm hot air30-230°CBake or roast on one or more levels.
The fan distributes the heat from the ring-shaped heating element in the back wall evenly around the cooking compartment.
Top/bottom heat30-275°CTraditionally bake or roast on one level. This type of heating is
especially good for cakes with moist toppings.
The heat is emitted evenly from above and below.
Circo Therm gentle125-230°CFor gently cooking selected types of food on one level without
preheating.
The fan distributes the heat from the ring-shaped heating element in the back wall around the cooking compartment.
The food is cooked in phases using residual heat. Always
keep the appliance door closed when cooking. The food is
cooked in phases using residual heat. Always keep the appliance door closed when cooking. If you open the appliance
door even briefly, the appliance will continue to heat without
utilising any residual heat.
This type of heating is used to determine the energy consumption in circulating-air mode and the energy efficiency class.
Top/bottom heat
gentle
Circo-roasting30-275°CRoast poultry, whole fish or larger pieces of meat.
Pizza setting30-275°CCook pizza or food that requires a lot of heat from below.
Bread baking setting180-275°CFor baking bread, bread rolls and baked goods that require
Full-surface grill50-290°CFor grilling flat items such as steaks, sausages or bread, and
Centre-area grill50-290°CFor grilling small amounts of steaks, sausages or bread, and
Bottom heat30-250°CFor cooking in a bain marie and for baking food for extra time.
Low-temperature
cooking
Dough proving30-50°CFor proving dough and culturing yoghurt.
Plate warming30-90CFor heating cookware.
Keep warm50-100°CFor keeping cooked food warm.
150-250°CFor gently cooking selected types of food without preheating.
Heat is emitted from above and below.
This type of heating is used to determine the energy consumption in the conventional mode.
The grill element and the fan switch on and off alternately. The
fan circulates the hot air around the food.
The bottom heating element and the ring-shaped heating element in the back wall heat the cooking compartment.
high temperatures.
for cooking au gratin.
The entire area below the grill element becomes hot.
for cooking au gratin.
The central area below the grill element becomes hot.
The heat is emitted from below.
70-120°CFor gentle, slow cooking of seared, tender pieces of meat in
cookware without a lid.
The heat is emitted evenly from above and below at a low temperature.
Dough will prove more quickly than at room temperature. The
surface of the dough does not dry out.
10
Functions en
5.2 Microwave power settings
This is where you can find an overview of the different microwave output settings and recommendations on when to
use them.
Microwave output in
watts
90W1:30Defrost delicate foods.
180W1:30Defrost food and continue cooking.
360W1:30Cook fish and meat. Heat up delicate foods.
600W1:30Heat and cook food.
900W"Boost"00:30Heat liquids.
Notes
¡ To protect the appliance, the maximum microwave
output "Boost" is gradually reduced to 600 watts
during the first few minutes. Maximum output is
Maximum cooking
time in hours
Use
made available again after a cooling period. Full
output is made available again after a cooling
period.
¡ The microwave output settings do not correspond
with the real power consumption of the appliance.
5.3 Additional options
You can find an overview of other options here.
To display the options, press
SymbolNameUse
LightingSwitch the lighting in the cooking compartment on or off
TimerSet the timer
Childproof lockActivate the childproof lock
Remote startActivate remote start
→"HomeConnect ", Page21
5.4 Symbols
You can find an overview of other symbols on the display here.
SymbolNameUse
SaveSaveSave the setting
BackNavigate back
CloseClose the message
ResetReset the cooking time
ResetReset the values
InformationDisplay information
Rapid heatingActivate or deactivate the rapid heating function
HomeConnect¡ Home network and HomeConnect server connected
¡ The number of lines shows the signal strength of the home network
→"HomeConnect ", Page21
Home networkHome network not connected
→"HomeConnect ", Page21
HomeConnect server HomeConnect server not connected
→"HomeConnect ", Page21
Remote DiagnosticsRemote diagnostics activated
→"HomeConnect ", Page21
11
en Accessories
Accessories
6 Accessories
Use original accessories. These have been made especially for your appliance.
Note:Accessories may become deformed if they get
hot. Deformation has no effect on function. As the accessory cools down, it will regain its original shape.
AccessoriesUse
Wire rack¡ Cake tins
Universal pan¡ Moist cakes
6.1 Information on accessories
Some accessories are only suitable for certain functions.
The accessories supplied may differ depending on the
appliance model.
¡ Ovenproof dishes
¡ Cookware
¡ Meat, e.g. roasting joints or steak
¡ Frozen meals
¡ Baked items
¡ Bread
¡ Large roasts
¡ Frozen meals
¡ Catch dripping liquids, e.g. fat when
grilling food on the wire rack.
Wire rackInsert the wire rack with the open
side facing the appliance door.
Microwave accessories
The wire rack that is supplied is only suitable for operation solely using the microwave.
Baking trays, e.g. the universal pan or the baking tray,
may create sparks and are not suitable.
Observe the information about the microwave.
→"Cookware and accessories with microwave",
Page15
6.2 Locking function
The locking function prevents the accessories from tilting when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the cooking compartment correctly for the tilt protection to work properly.
6.3 Sliding accessories into the cooking
compartment
Always slide the accessory into the cooking compartment the right way round. This is the only way to ensure that accessories can be pulled out approximately
halfway without tipping.
1.
Turn the accessories so that the notch is at the
rear and is facing downwards.
2.
Insert the accessory between the two guide rods for
a shelf position.
Tray
E.g. universal pan or
baking tray
3.
To place the accessory at shelf positions with pull-
out rails, pull out the pull-out rails.
Wire rack
or baking
tray
Slide the tray in with the sloping
edge towards the appliance door.
Position the accessory such that it is
inserted on the rear stop of the
pull-out system.
12
Note:Gently push the pull-out rails back into the
cooking compartment.
4.
Push the accessory all the way in, making sure that
it does not touch the appliance door.
Note:Take any accessories that you will not be using
out of the cooking compartment while the appliance is
in operation.
6.4 Other accessories
You can purchase other accessories from our customer service, specialist retailers or online.
Before using for the first time
7 Before using for the first time
Before using for the first time en
You will find a comprehensive range of products for
your appliance in our brochures and online:
www.neff-home.com
Accessories are appliance-specific. When purchasing
accessories, always quote the exact product number (E
no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our customer
service.
Configure the settings for initial start-up. Clean the appliance and accessories.
7.1 Initial use
After connecting the appliance to the power supply,
you must configure the settings for its initial start-up. It
may take a few minutes for the settings to appear on
the display.
Notes
¡ You can adjust the settings at any time in the basic
settings.
→"Basic settings", Page20
¡ You can also use HomeConnect to configure the
settings. When your appliance is connected, follow
the instructions in the app.
→"HomeConnect ", Page21
Setting the language
Requirement:The appliance is connected to the power
supply.
1.
Press to switch the appliance on.
2.
Use the or button to select the language.
3.
Press the required language.
4.
Press to confirm the language.
Setting up HomeConnect
Note:You can skip HomeConnect set-up by pressing
"Later". Next, set the clock.
1.
Press "Connect" to set up HomeConnect.
2.
Make all other settings for initial start-up in the
HomeConnect app.
Setting the time
1.
Use or to select the hours.
2.
Press the minutes.
3.
Use or to select the minutes.
4.
Press to confirm the time.
Setting the date
1.
Use or to select the year.
2.
Press the month.
3.
Use or to select the month.
4.
Press the day.
5.
Use or to select the day.
6.
Press to confirm the date.
7.
Press "OK" to end the initial start-up.
8.
Open and close the appliance door once.
a The appliance will perform a self-test, after which it
will be ready to use.
a The initial start-up is now complete.
7.2 Cleaning the appliance
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and accessories.
1.
Remove the product information, accessories and
any leftover packaging (e.g. polystyrene pellets)
from the cooking compartment.
2.
Wipe the smooth surfaces in the cooking compartment with a soft, damp cloth.
3.
Press to switch the appliance on.
→"Switching on the appliance", Page14
4.
Set the required type of heating and temperature for
the heat-up process and press to start.
→"Setting the type of heating and temperature",
Page14
Heating up
Type of heatingCirco Therm hot air
TemperatureMaximum
Cooking time1hour
5.
Ventilate the kitchen while the appliance is heating.
6.
Press to switch off the appliance after 1hour.
→"Switching off the appliance", Page14
7.
Allow the appliance to cool down.
8.
Clean the smooth surfaces with soapy water and a
dish cloth.
9.
Thoroughly clean any accessories you used with
soapy water and a dish cloth.
13
en Basic operation
Basic operation
8 Basic operation
8.1 Switching on the appliance
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120°C, this will damage the enamel.
▶ Do not use the appliance if there is water on the
cooking compartment floor.
▶ Wipe away any water on the cooking compartment
floor before operation.
▶
Press to switch the appliance on.
Notes
¡ In the basic settings, you can specify whether the
display shows the main menu or another function
when the appliance is switched on.
→"Basic settings", Page20
¡ If you do not perform any actions on the appliance
for an extended period, it will automatically switch itself off.
8.2 Switching off the appliance
▶
Press to switch the appliance off.
Notes
¡ The residual heat indicator will appear on the dis-
play while the cooking compartment is still hot.
→"Residual heat indicator", Page14
¡ The cooling fan will continue to run until the cooking
compartment has cooled down.
→"Cooling fan", Page9
8.3 Residual heat indicator
After you have switched off the appliance, the residual
heat indicator will appear on the display.
9.
When the food is ready, use to switch the appli-
ance off.
8.5 Changing the temperature
You can also change the temperature or level once you
have started the appliance.
1.
Press "Temperature".
2.
Use or to change the temperature.
3.
Press to confirm the setting.
a The temperature is changed.
8.6 Changing the type of heating
If you switch to a different type of heating, the appliance will reset all the settings.
1.
Press to pause operation.
2.
Press to switch to the types of heating.
3.
Scroll through the types of heating using or .
4.
Press the type of heating that you want to use.
5.
Adjust the temperature or level, if required.
6.
Press to start the operation.
8.7 Pausing operation
1.
Press .
2.
Press again to resume operation.
8.8 Displaying information
Note:In most cases, you can call up information about
the function that you have just started.
1.
Press "Information".
a The information will be displayed for a few seconds.
2.
Press to close the information.
DisplayTemperature
Residual heat highOver 120°C
Residual heat lowBetween 60 and 120°C
8.4 Setting the type of heating and
temperature
1.
Press to switch the appliance on.
2.
Press "Types of heating".
3.
Scroll through the types of heating using or .
4.
Press the type of heating that you want to use.
5.
Press "Temperature".
6.
Use or to select the temperature.
7.
Press to confirm the setting.
Also available to select:
– Rapid heating →Page20
– Cooking time →Page17
– Ready at →Page17
– Microwave →Page16
– Information →Page14
8.
Press to start the operation.
a The cooking time appears on the display.
a For some types of heating, the heat-up indicator can
be viewed in the preheating phase. The optimal time
to place your food in the cooking compartment is as
soon as the heat-up indicator is filled.
8.9 Keeping warm over an extended period
You can use your appliance to keep meals warm for up
to 24 hours without changing the behaviour of the appliance. Use the time functions and change the basic
settings.
Note:If you open the appliance door during operation,
the appliance stops heating. When you close the appliance door, the appliance continues to heat again. To
ensure that the behaviour of the appliance is not
changed during operation, only open the appliance
door once the set time has elapsed.
1.
Change the basic settings.
→"Basic settings", Page20
‒ Change the "Lighting" basic setting to "Always
off".
‒ Change the "Standby screen" basic setting to
"On".
‒ Change the "Signal tone" basic setting to "Very
short duration".
a This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door. The
clock display does not change. The duration of the
signal tone is reduced at the end of the operation.
14
Microwave en
2.
Set the required operating mode.
→"Heating functions", Page10
3.
Set the required cooking time depending on the operating mode.
→"Setting the cooking time", Page17
→"Time-setting options", Page17
4.
Use "End" to set the time at which the operation
should end.
→"Setting the "Ready at" time for delayed starts",
Page17
→"Time-setting options", Page17
5.
Place the food in the cooking compartment before
the appliance starts to heat.
Microwave
9 Microwave
You can use the microwave to cook, heat up, bake or
defrost food very quickly.
The microwave can be used on its own, or in combination with a different function.
9.1 Cookware and accessories with
microwave
To heat food evenly and avoid damaging your appliance, it is important to only use the right cookware and
accessories.
Follow the cookware manufacturer's instructions.
Unless otherwise specified, place the cookware and
accessory on level 1.
6.
Press to start the operation.
a The display shows the time remaining until the oper-
ation starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
7.
When the operation has ended, remove the food
from the cooking compartment. The appliance automatically switches off completely after approximately
15 to 20minutes.
Note:If required, change the different basic settings
again.
Cookware when adding microwave to an operating
mode
If you switch on the microwave for another operating
mode, metal is also an option, in addition to
microwave-safe cookware and accessories:
¡ Metal cookware and bakeware
Metal must be kept at least 2cm from the cooking
compartment walls and the inside of the door.
Always place metal cookware or bakeware in the
centre of the supplied wire rack.
¡ Accessories supplied:
Wire rack
Universal pan
Baking tray
Microwave-safe cookware
Cookware made from heat-resistant, microwave-safe
material:
Only use cookware with decorative gold or silver
trim if the manufacturer guarantees its suitability for
microwave use.
¡ Supplied wire rack
In microwave-only operation, sheets and trays, e.g.
the universal pan or the baking tray, may create
sparks and are not suitable.
These materials allow microwaves to pass through and
are not damaged.
Cookware that is not microwave-safe
Note:Observe the specifications for preventing mater-
ial damage.
→"Microwave", Page6
¡ Metal cookware and bakeware
Microwaves cannot pass through metal. The food is
barely heated or not heated at all. Metal may create
sparks in microwave-only operation.
Testing cookware for microwave suitability
If you are unsure whether your cookware is suitable for
use in the microwave, carry out a cookware test.
ATTENTION!
Operating the appliance without food in the cooking
compartment may lead to overloading.
▶ Do not switch on the microwave unless there is food
inside. The only exception to this rule is when performing a short cookware test.
WARNING‒Risk of burns!
The accessible parts of the appliance become hot during operation.
▶ Never touch these hot parts.
▶ Keep children at a safe distance.
1.
Place the empty cookware in the cooking compartment.
2.
Set the appliance to run for 30 seconds to 1 minute
at maximum power.
3.
Start the operation.
4.
Check the cookware several times:
‒ If the cookware remains cold or warm to the
touch, it is suitable for microwave use.
15
en Ventilation function "Crisp Finish"
‒ If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
9.2 Microwave-only operation
The electromagnetic waves of the microwave alone
generate energy and this is converted into heat in food,
for example.
To prevent condensation, when the microwave output
is "600W" and "Boost", the appliance automatically
switches on a heating element. The cooking compartment and the accessories become hot. The cooking
result is not affected by this.
You can switch off this automatic drying function in the
basic settings.
→"Basic settings", Page20
WARNING‒Risk of burns!
At the highest settings in microwave only mode, the
drying function will automatically switch on an additional heating element to heat the cooking compartment.
▶ Never touch the inside surfaces of the cooking com-
partment or the heating elements while they are hot.
▶ Keep children at a safe distance.
9.3 Added microwave
Adding the microwave to a type of heating or function
reduces the cooking time.
Types of heating and functions for added
microwave
You can switch on added microwave for the following
types of heating and functions:
Possible microwave output settings combined with a
type of heating or function include:
¡ "90W"
¡ "180W"
¡ "360W"
Setting added microwave
Note:
Note the correct way to operate the microwave:
¡ →"Safety", Page2
¡ →"Preventing material damage", Page6
¡ →"Microwave power settings", Page11
¡ →"Cookware and accessories with microwave",
Page15
Requirement:Observe the information about the respective type of heating or function.
1.
Set a suitable type of heating or function.
→"Types of heating and functions for added mi-
crowave", Page16
2.
Set the required temperature.
3.
Press "Microwave".
4.
Press the required microwave output setting:
– "90W"
– "180W"
– "360W"
5.
Press to confirm the setting.
6.
Press "Cooking time".
7.
Use or to select the cooking time.
8.
Press to confirm the setting.
9.
Press to start operation with added microwave.
a The appliance starts to heat and the time counts
down.
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
10.
Press any button to end the signal tone.
Cancelling added microwave
1.
Press .
2.
Press "Microwave".
3.
Press "Off".
4.
Press to confirm the setting.
a The operation continues without added microwave.
Ventilation function "Crisp Finish"
10 Ventilation function "Crisp Finish"
The ventilation function "Crisp Finish" extracts moisture
from the cooking compartment so that your meal will
be more crispy.
Hot steam that may escape when the appliance door is
opened is reduced.
10.1 Types of heating for the ventilation
function
Only certain types of heating are suitable for the ventilation function.
You can activate the ventilation function for the
following types of heating:
You can activate the ventilation function at any time,
even once the operation has started.
1.
Press to switch the appliance on.
2.
Set a suitable type of heating.
→"Types of heating for the ventilation function",
Page16
3.
Set the required temperature.
4.
Press "Crisp Finish".
5.
Press to start operation with the ventilation func-
tion.
6.
When the food is ready, use to switch the appli-
ance off.
Time-setting options en
Note:Amplified fan noises can be heard while the
appliance is in operation.
Time-setting options
11 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
Time-setting
option
TimerYou can set the timer to run inde-
Cooking
time
Ready atAlong with the duration, you can set
11.1 Timer
You can set the timer regardless of whether the appliance is on or off.
Setting the timer
1.
Press .
2.
Press .
3.
Press Hours, Minutes or Seconds.
4.
Use or to select the timer duration.
5.
Press to confirm the setting.
a appears on the display. The timer counts down.
a Once the timer duration has elapsed, an audible sig-
nal sounds.
6.
Press any button to end the audible signal.
Changing the timer
1.
Press .
2.
Press .
3.
Press .
4.
Press Hours, Minutes or Seconds.
5.
Use or to change the timer duration.
6.
Press to confirm the setting.
Cancelling the timer
1.
Press .
2.
Press .
3.
Press to reset the timer duration.
4.
Press to close the timer.
11.2 Cooking time
Once the set duration has elapsed, the appliance stops
heating automatically. You can only use the cooking
time in conjunction with a type of heating.
Use
pendently of the appliance during operation. The timer does not affect the
appliance.
Once the set duration has elapsed,
the appliance stops heating automatically.
the time at which you want the operation to end. The appliance starts up
automatically so that the operation
finishes at the required time.
10.3 Cancelling the ventilation function
1.
Press .
2.
Press "Crisp Finish".
a The operation continues without the ventilation func-
tion.
2.
Press "Cooking time".
3.
Press Hours or Minutes.
4.
Use or to select the cooking time.
5.
Press to confirm the setting.
6.
Press to start operation with a cooking time.
a The cooking time appears on the display. The cook-
ing time counts down.
a When the time has elapsed, a signal sounds.
7.
Press any button to end the audible signal.
Changing the cooking time
1.
Press .
2.
Press "Cooking time".
3.
Use or to change the cooking time.
4.
Press to confirm the setting.
Cancelling the cooking time
1.
Press .
2.
Press "Cooking time".
3.
Reset the cooking time using .
4.
Press to confirm the setting.
11.3 Delayed start/"Ready at" time
With this function, the appliance automatically switches
itself on, and then switches itself off at the preselected
end time. To enable it to do this, you set the cooking
time (duration) and specify when you want your food to
be ready. You can only use the delayed start function
in conjunction with a heating function.
Setting the "Ready at" time for delayed starts
Notes
¡ Do not leave food that spoils easily in the cooking
compartment for too long.
¡ You cannot use the delayed start function with every
type of heating.
1.
Place the food into the cooking compartment and
close the appliance door.
2.
Set a type of heating and a temperature.
3.
Press "Cooking time".
4.
Press Hours or Minutes.
5.
Use or to select the cooking time.
6.
Press to confirm the setting.
7.
Press "Ready at".
a The time at which your food will be ready will ap-
pear on the display.
8.
Use the button to select the required end time.
9.
Press to confirm the setting.
10.
Press to confirm the delayed start.
a The appliance will start at the appropriate time.
a When the time has elapsed, a signal sounds.
11.
Press any button to end the audible signal.
Setting the cooking time
1.
Set a type of heating and a temperature.
Changing the "Ready at" time for delayed starts
1.
Press .
17
en Dishes
2.
Press "Ready at".
3.
Use or to change the end time.
4.
Press to confirm the setting.
5.
Press to confirm the delayed start.
Cancelling the "Ready at" time for delayed starts
1.
Press .
2.
Press "Ready at".
Dishes
12 Dishes
"Dishes" helps you to use your appliance to prepare
different dishes by selecting the optimum settings automatically.
12.1 Cookware for dishes
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300°C. Glass or
glass ceramic cookware is best. The joint should cover
approx.2/3 of the cookware base.
Cookware made from the following material is not
suitable:
Note:For some dishes, the appliance switches on the
microwave. A notification appears in the display stating
that you should use cookware that is suitable for microwave use.
→"Cookware and accessories with microwave",
Page15
12.2 Setting options for the dishes
To cook the dishes perfectly, the appliance uses different settings depending on the dish.
The display shows you the settings that are used. You
can adjust certain settings. Follow the instructions on
the display.
Note:The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food. Use frozen food straight from the freezer.
Tips and information about the settings
If you set a dish, the display shows relevant information
for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
When this time is reached, a signal sounds.
To call up the information, press "Information". Some
notifications are displayed automatically.
Programmes
The optimum type of heating, temperature and cooking
time are preset for programmes.
To achieve an optimal cooking result, you must also
set the weight, thickness or the cooking level. You can
set the weight only in the intended range.
3.
Use to reset the end time.
4.
Press to confirm the setting.
a The end time corresponds to the current time plus
the set cooking time.
a Press to start operation with a cooking time.
Note:If you want to continue the operation without a
cooking time, cancel the cooking time.
→"Cancelling the cooking time", Page17
Unless otherwise indicated, set the total weight for your
dish.
Recommended settings
For the recommended settings, the optimum type of
heating is preset as a fixed value. You can adjust the
set temperature and the cooking time.
Dishes with microwave
For some dishes, you can select a cooking method
with microwave . The cooking time is reduced.
Observe the information on operating with microwave.
→"Microwave", Page15
12.3 Overview of the dishes
You can see which individual dishes are available to
you on the appliance. The dishes depend on the features of your appliance.
The dishes are sorted by category and food.
Note:In the basic settings, you can regionally specialise the displayed dishes.
→"Basic settings", Page20
CategoryFood
CakesCakes in tins
Cakes on a baking tray
Small baked items
Biscuits
Bread,
bread rolls
Pizza, savoury
cakes,
quiche
Bakes,
soufflés
PoultryChicken
Bread
Bread rolls
Pizza
Savoury cakes, quiche
Bake, savoury, fresh, cooked ingredients
Potato gratin, raw ingredients, 4cm
deep
Lasagne, fresh
Lasagne, chilled
Bake, sweet, fresh
Fruit crumble
Soufflés in individual moulds
Yorkshire pudding
Duck, goose
Turkey
18
CategoryFood
MeatPork
Beef
Veal
Lamb
Game
Meat dishes
Fish.Fish, whole
Fish fillets
Frozen
products
Pizza
Bakes
Potato products
Poultry, fish
Bread rolls
Side dishes,
vegetables
Potatoes
Rice
Cereals
Vegetables
Defrosting
food
Cakes
Bread, bread rolls
Meat, poultry
Fish.
12.4 Setting a dish
1.
Press "Dishes".
2.
Press the required category.
3.
Press the required food.
4.
Press the required dish.
Note:The setting options vary depending on the
dish.
→"Setting options for the dishes", Page18
a The settings for the dish appear on the display.
Favourites en
5.
Adjust the settings if required.
The setting options vary depending on the dish.
→"Setting options for the dishes", Page18
6.
For information about the accessory and shelf position, for example, press "Information".
7.
Press to start the operation.
a The appliance starts to heat and the cooking time
counts down.
a Once the dish is ready, a signal sounds. The appli-
ance stops heating.
8.
Decide how you want to continue:
FinishDish is ready
Add extra cooking
time
Keep warm
→"Extending the cooking
time", Page19
→"Keeping a dish warm",
Page19
Dry the cooking
→"Drying", Page26
compartment
12.5 Extending the cooking time
1.
To extend the cooking time, press "Add extra cooking time".
2.
Use the or button to change the settings, if required.
3.
Press to confirm the settings.
12.6 Keeping a dish warm
1.
To keep the dish warm, press "Keep warm".
2.
Use the or button to change the settings, if required.
3.
Press to confirm the settings.
4.
Press to start the keep warm function.
Favourites
13 Favourites
In the "Favourites", you can save your settings and use
these again.
Notes
¡ Depending on the appliance type/software status,
you must first download this function to your appliance. You can find more information in the
HomeConnect app.
¡ You can only sort and rename favourites in the
HomeConnect app.
13.1 Saving favourites
You can save up to 30 different functions as your favourites.
▶
If you set a function, press "Favourites".
To rename a favourite, you must use the HomeConnect app. When your appliance is connected, follow
the instructions in the app.
13.2 Selecting favourites
If you have saved favourites, you can use these to set
the operation.
1.
Press "Favourites".
2.
Press the required favourites.
3.
If required, you can change the settings.
4.
Press to start the operation.
Note:
Observe the instructions for the various functions:
¡ →"Microwave", Page15
¡ →"Ventilation function 'Crisp Finish'", Page16
13.3 Changing favourites
You can change, sort or rename your saved favourites
at any time.
1.
To sort or rename the favourites, you must use the
HomeConnect app. When your appliance is connected, follow the instructions in the app.
2.
To change the settings on the appliance, press "Favourites".
3.
Press the required favourites.
4.
Press
5.
Change the settings.
6.
Press "Apply" to confirm the change.
13.4 Deleting favourites
1.
Press "Favourites".
2.
Press the required favourites.
3.
Press .
4.
Press "Delete" to confirm.
19
en Childproof lock
Childproof lock
14 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the settings.
14.1 Activating the childproof lock
The childproof lock disables the control panel to prevent children from accidentally switching on the appliance. To switch on the appliance, deactivate the childproof lock.
Rapid heating
15 Rapid heating
With the rapid heating function, you can shorten the
heat-up time.
From 200°C, the rapid heating function is activated
automatically.
Note:You can deactivate automatic rapid heating from
200°C in the basic settings.
→"Basic settings", Page20
Rapid heating is possible for the following types of
heating:
Note:When you activate the childproof lock, the appliance will immediately disable the control panel. The
button is the exception and will not be disabled.
1.
Press .
2.
Press .
a "Childproof lock activated" appears on the display.
14.2 Deactivating the childproof lock
▶
Press and hold "Unlock" until "Childproof lock deac-
tivated" appears.
Note:Do not set a cooking time until rapid heating has
come to an end.
1.
Set a suitable type of heating and a temperature of
at least 100°C.
Rapid heating automatically switches on at temper-
atures of 200°C and above.
2.
Press .
3.
Press to start the operation.
a Once rapid heating has ended, "Rapid heating"
switches off automatically and a signal sounds.
goes out on the display.
4.
Place the food in the cooking compartment.
15.1 Activating rapid heat-up
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Basic settings
16 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
16.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
You can find more information about the individual basic settings on the display using "Information".
Basic settings Selection
LanguageSee selection on the appliance
HomeConnect Connect the oven to a mobile end
device and remotely control it
TimeTime in 24-hour format
DateDate in the format DD.MM.YYYY
15.2 Deactivating the "Rapid heat-up"
function
1.
Press .
2.
Press .
DisplaySelection
Brightness¡ 1
¡ 2
¡ 3
¡ 4
1
¡ 5
Standby
screen
Clock¡ Digital + date
AdjustmentAlign the display horizontally and ver-
1
Factory setting (may vary according to model)
¡ On for a limited time
¡ On (this setting increases energy
consumption)
1
¡ Off
1
¡ Digital
¡ Analogue + date
¡ Analogue
tically
20
HomeConnect en
SoundSelection
Button tone¡ On
1
¡ Off
Signal tone¡ Very short duration
¡ Short duration
¡ Medium duration
1
¡ Long duration
1
Factory setting (may vary according to model)
Appliance set-
Selection
tings
Fan run-on
time
¡ Minimum
¡ Recommended
1
¡ Long
¡ Very long
Illumination¡ On when cooking and opening
the door
1
¡ Only when the door is opened
¡ Always off
Microwave output presetting
¡ 90W
¡ 180W
¡ 360W
¡ 600W
¡ Boost
Continue to
microwave
¡ On
¡ Off
Dry microwave ¡ On
1
1
1
¡ Off
1
Factory setting (may vary according to model)
Personalisa-
Selection
tion
Brand logo¡ Display
1
¡ Do not display
Operation after
switch-on
¡ Main menu
¡ Types of heating
1
¡ Microwave
¡ Dishes
¡ Favourites
1
Factory setting (may vary according to model)
Personalisa-
Selection
tion
Elapsed cooking time
Microwave
baking tray
Regional
dishes
¡ Display
¡ Do not display
¡ On
¡ Off
¡ All
¡ European dishes
1
1
1
¡ British dishes
Dishes¡ All
1
¡ No pork
¡ Kosher only
Childproof
lock
Automatic
rapid heating
1
Factory setting (may vary according to model)
Factory set-
¡ Available
¡ Deactivated
¡ On
¡ Off
Selection
1
1
tings
Factory settings
Appliance in-
¡ Cancel
¡ Restore
Display
formation
Appliance information
Display technical information about
the appliance
16.2 Changing basic settings
1.
Press to switch the appliance on.
2.
Press "Basic settings".
3.
Use or to scroll through the basic settings or categories.
4.
Press the required basic setting or category.
‒ Press the required basic setting in a category.
5.
Swipe left or right to select the required setting.
6.
Press to confirm the change.
If does not appear, the change is applied immediately.
7.
To change other basic settings, use to return to
the basic settings.
HomeConnect
17 HomeConnect
This appliance is network-capable. Connecting your appliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeConnect app to configure the settings.
Tip:Please also follow the instructions in the
HomeConnect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the HomeConnect app.
→"Safety", Page2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the HomeConnect
app.
¡ In networked standby mode, the appliance requires
a maximum of2W.
21
en HomeConnect
17.1 Setting up the HomeConnect app
1.
Install the HomeConnect app on your mobile
device.
2.
Start the HomeConnect app and set up access for
HomeConnect.
The HomeConnect app guides you through the entire login process.
17.2 Setting up HomeConnect
Requirements
¡ The appliance is connected to the power supply and
is switched on.
¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smartphone.
¡ The HomeConnectapp has been installed on your
mobile device.
¡ The appliance is receiving signals from the WLAN
home network (Wi-Fi) at its installation location.
¡ The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
1.
Open the HomeConnect app and scan the following QR code.
2.
Follow the instructions in the HomeConnect app.
17.3 HomeConnect settings
You can adjust the HomeConnect settings and network settings in your appliance's basic settings.
Which settings the display shows will depend on whether HomeConnect has been set up and whether the appliance
is connected to your home network.
Basic settingPossible settingsExplanation
Home Connect assistant
Wi-FiOn
Remote control status Monitoring
Start the assistant
Disconnect
Off
Manual remote start
Permanent remote start
You can connect your appliance to the Home Connect app via
the Home Connect assistant.
Note:If you are using the Home Connect assistant for the first
time, only the "Start assistant" setting is available.
You can use the Wi-Fi to switch off the network connection for
your appliance. When you have connected successfully once,
you can deactivate the Wi-Fi and not lose your detailed data.
As soon as you activate Wi-Fi again, the appliance connects
automatically.
Note:In networked standby mode, the appliance requires a
maximum of 2W.
During monitoring, you can only view the operating status of
the appliance in the app.
If you convert from monitoring or permanent remote start to
manual remote start, you must activate the remote start each
time. You can open the appliance door within 15 minutes of
having activated remote start. Remote start will not be deactivated by this. Once 15 minutes have elapsed, opening the appliance door will deactivate manual remote start.
For permanent remote start, you can start and operate the appliance remotely at any time. If you often operate the appliance
remotely, it is helpful to set the remote start to "Permanent".
17.4 Operating the appliance with the
HomeConnect app
You can use the HomeConnect app to set and start
the appliance remotely.
Combustible objects that are left in the cooking compartment may catch fire.
▶ Never store combustible objects in the cooking
▶ If smoke is emitted, the appliance must be switched
WARNING‒Risk of fire!
compartment.
off or the plug must be pulled out and the door
must be held closed in order to stifle any flames.
22
Cleaning and servicing en
Requirements
¡ The appliance is switched off.
¡ The appliance is connected to the home network
and to the HomeConnectapp.
¡ In order to be able to set the appliance via the app,
the manual or permanent remote start must be selected in the "Remote control status" basic setting.
1.
To activate manual remote start, press .
You only have to confirm on the oven if you are
switching from monitoring or permanent remote
start to manual remote start.
With permanent remote start, you do not need to
confirm on the oven.
2.
Configure a setting in the HomeConnectapp and
send it to the appliance.
Notes
¡ When you start the oven using the controls on
the appliance itself, the remote start function is
activated automatically. You can use the
HomeConnectapp to adjust the settings or start
a new programme.
¡ You can open the appliance door within 15
minutes of having activated remote start. Remote
start will not be deactivated by this. Once 15
minutes have elapsed, opening the appliance
door will deactivate manual remote start.
17.5 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of optimisation, troubleshooting or security updates.
To do this, you must be a registered HomeConnectuser, have installed the app on your mobile device
and be connected to the HomeConnectserver.
As soon as a software update is available, you will be
informed via the HomeConnectapp and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start installing it via the HomeConnectapp if you are in your
home network (Wi-Fi). The HomeConnectapp informs
you once installation is successful.
Notes
¡ The software update consists of two steps.
– The first step is the download.
– The second step is the installation on your appli-
ance.
¡ You can continue to use your appliance as normal
while updates are downloading. Depending on your
personal settings in the app, software updates can
also be set to download automatically.
¡ Installation takes a few minutes. You cannot use
your appliance during installation.
¡ We recommend that you install security updates as
soon as possible.
17.6 Remote diagnostics
Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appliance connected to the HomeConnect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Tip:For further information and details about the availability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com.
17.7 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
HomeConnect server (initial registration):
¡ Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the installed Wi-Fi communication module).
¡ Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡ The current software and hardware version of your
appliance.
¡ Status of any previous resetting to factory settings.
This initial registration prepares the HomeConnect
functions for use and is only required when you want to
use the HomeConnect functions for the first time.
Note:Please note that the HomeConnect functions
can only be utilised with the HomeConnect app. Information on data protection can be retrieved in the
HomeConnect app.
Cleaning and servicing
18 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
18.1 Cleaning products
In order to avoid damaging the various oven surfaces
on the appliance, do not use unsuitable cleaning
products.
WARNING‒Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶ Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
▶ Do not use harsh or abrasive cleaning products.
▶ Do not use cleaning products with a high alcohol
content.
▶ Do not use hard scouring pads or cleaning
sponges.
▶ Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
23
en Cleaning and servicing
Using oven cleaner in a hot cooking compartment
damages the enamel.
▶ Never use oven cleaner in the cooking compartment
when it is still warm.
▶ Remove all food remnants from the cooking com-
partment and the appliance door before you next
heat up the appliance.
If different cleaning agents are mixed together, there
may be a chemical reaction between these.
▶ Do not mix cleaning agents.
▶ Completely remove any cleaning agent residue.
Salt contained in new sponge cloths may damage surfaces.
▶ Wash new sponge cloths thoroughly before use.
Suitable cleaning agents
Only use cleaning agents that are suitable for the different surfaces on your appliance.
Appliance front
SurfaceSuitable cleaning agents Information
Stainless steel¡ Hot soapy water
¡ Special stainless steel
cleaning products
suitable for hot sur-
To prevent corrosion, remove any patches of limescale, grease,
starch or albumin (e.g. egg white) from stainless steel surfaces immediately.
Apply a thin layer of the stainless steel cleaning product.
faces
Plastic or painted
surfaces
¡ Hot soapy waterDo not use glass cleaner or a glass scraper.
To avoid permanent stains, immediately remove any descaling agent
that gets onto the surface.
Glass¡ Hot soapy waterDo not use glass cleaner or a glass scraper.
Follow the instructions on cleaning the appliance.
→"Cleaning the appliance", Page25
Appliance door
AreaSuitable cleaning agents Information
Door panels¡ Hot soapy water
¡ Oven cleaner
Do not use a glass scraper or steel wool.
Tip:Remove the door panels in order to clean them thoroughly.
→"Appliance door", Page27
Door cover¡ Made of stainless
steel:
Stainless steel cleaner
¡ Made from plastic:
Do not use glass cleaner or a glass scraper.
Do not use stainless steel care products.
Tip:Remove the door cover for thorough cleaning.
→"Appliance door", Page27
Hot soapy water
Stainless steel interior door frame
¡ Stainless steel cleaner Discolouration can be removed using stainless steel cleaner.
Do not use stainless steel care products.
Door handle¡ Hot soapy waterTo avoid permanent stains, immediately remove any descaling agent
that gets onto the surface.
Door seal¡ Hot soapy waterDo not remove or scrub.
Cooking compartment
AreaSuitable cleaning agents Information
Enamel surfaces¡ Hot soapy water
¡ Vinegar solution
¡ Oven cleaner
Soak any heavily soiled areas and use a brush or steel wool.
Leave the appliance door open to dry the cooking compartment
after cleaning it.
Notes
¡ Enamel burns at very high temperatures, causing minor discol-
ouration. The functionality of your appliance is not affected by
this.
¡ The edges of thin trays cannot be completely enamelled and may
be rough. This does not impair the corrosion protection.
¡ Food residues leave a white coating on the enamel surfaces. The
coating does not pose a health risk. The functionality of your appliance is not affected by this. You can remove residues with
lemon juice.
Self-cleaning surfaces
-Follow the instructions for self-cleaning surfaces.
→"Regenerating self-cleaning surfaces in the cooking compart-
ment", Page25
24
"Easy Clean" cleaning aid en
AreaSuitable cleaning agents Information
Shelf supports¡ Hot soapy waterSoak any heavily soiled areas and use a brush or steel wool.
Note:To clean thoroughly, detach the shelf supports.
→"Rails", Page27
Pull-out system¡ Hot soapy waterUse a brush to remove heavy soiling.
Clean the pull-out rails while they are pushed in so that you do not
remove the lubricant.
Do not clean in the dishwasher.
Note:To clean thoroughly, detach the pull-out system.
→"Rails", Page27
Accessories¡ Hot soapy water
¡ Oven cleaner
Soak any heavily soiled areas and use a brush or steel wool.
Enamelled accessories are dishwasher-safe.
18.2 Cleaning the appliance
In order to avoid damaging the appliance, you must
clean your appliance only as specified, and with suitable cleaning products.
WARNING‒Risk of burns!
The appliance and its parts that can be touched become hot during use.
▶ Caution should be exercised here in order to avoid
touching heating elements.
▶ Young children under 8 years of age must be kept
away from the appliance.
WARNING‒Risk of fire!
Loose food remnants, fat and meat juices may catch
fire.
▶ Before using the appliance, remove the worst of the
food residues and remnants from the cooking compartment, heating elements and accessories.
Requirement:Read the information on cleaning
products.
→"Cleaning products", Page23
1.
Clean the appliance using hot soapy water and a
dish cloth.
Regenerating self-cleaning surfaces in the
cooking compartment
The back panel in the cooking compartment is selfcleaning. The self-cleaning surfaces are coated with a
porous, matt ceramic layer and have a rough surface.
When the appliance is in operation, the self-cleaning
surfaces absorb splashes from baking, roasting or
grilling, and break them down. If the self-cleaning surfaces no longer clean themselves adequately during
operation, heat up the cooking compartment specifically to the right temperature.
ATTENTION!
If you do not clean the self-cleaning surfaces regularly,
they may become damaged.
▶ If dark stains are visible on the self-cleaning sur-
faces, heat up the cooking compartment.
▶ Do not use oven cleaner or abrasive cleaning aids.
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately using water and a sponge cloth. Do not rub.
1.
Remove accessories and cookware from the cooking compartment.
2.
Detach the shelf supports and remove them from
the cooking compartment.
→"Rails", Page27
3.
Remove coarse dirt using soapy water and a soft
cloth:
– From the smooth enamel surfaces
– From the inside of the appliance door
– From the glass cover on the oven lamp
This prevents stains that cannot be removed.
4.
Remove any objects from the cooking compartment.
The cooking compartment must be empty.
5.
Set the hot air type of heating.
6.
Set the maximum temperature.
7.
Start the operation.
8.
Switch off the appliance after 1hour.
9.
Once the appliance has cooled down, wipe the
cooking compartment with a damp cloth.
Note:Marks may appear on the self-cleaning surfaces. Residues of sugar and egg white in the food
are not removed and stick to the surfaces. Red
stains are residues from salty food – they are not
rust. The stains are not hazardous to health. These
marks do not impair the cleaning ability of the selfcleaning surfaces.
10.
Attach the shelf supports.
→"Rails", Page27
"Easy Clean" cleaning aid
19 "Easy Clean" cleaning aid
Use the "Easy Clean" cleaning aid for intermediate
cleaning of the cooking compartment. The "Easy
Clean" cleaning aid softens dirt by vaporising the
soapy water. It is then easier to remove the dirt.
25
en Drying
19.1 Setting the "Easy Clean" cleaning aid
WARNING‒Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
▶ Never pour water into the cooking compartment
when the cooking compartment is hot.
Notes
¡ The oven light does not light up while the cleaning
aid is running.
¡ Do not open the appliance door while the appliance
is in operation.
Requirements
¡ You can only start the cleaning aid once the cooking
compartment is cold (room temperature) and the appliance door is closed.
¡ To remove particularly stubborn dirt, rub washing-up
liquid onto dirty areas on the smooth surfaces before
starting the cleaning aid.
1.
Remove any accessories from the cooking compartment.
2.
ATTENTION!
Distilled water in the cooking compartment leads to
corrosion.
▶ Do not use distilled water.
Mix 0.4litres water with a drop of washing-up liquid
and pour into the centre of the cooking compartment floor.
3.
Press "Cleaning".
4.
Press "Easy Clean".
5.
Press to start the cleaning aid.
a A notification stating that you should carry out the
necessary preparatory work for the cleaning aid appears on the display.
6.
Press "OK" to confirm the notification.
a The cleaning aid starts. The duration counts down
on the display.
a Once the cleaning aid has run through to the end,
an audible signal sounds.
7.
Press any button to end the audible signal.
8.
After using the cleaning aid, finish cleaning the
cooking compartment.
→"Wiping down the cooking compartment",
Page26
19.2 Wiping down the cooking compartment
ATTENTION!
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
▶ After using the cleaning aid, wipe the cooking com-
partment clean and allow it to dry fully.
Requirement:The cooking compartment must have
cooled down.
1.
Open the appliance door and remove the remaining
water with an absorbent sponge cloth.
2.
Clean the smooth surfaces in the cooking compartment with a dish cloth or a soft brush. Remove stubborn food remnants using a stainless steel scouring
pad.
3.
Remove limescale with a cloth soaked in vinegar.
Then wipe with clean water and rub dry with a soft
cloth (including under the door seal).
4.
If there is any stubborn dirt that you are unable to
remove, run the cleaning aid again once the cooking compartment has cooled down.
5.
In order to dry the cooking compartment, leave the
appliance door open in the detent position (approx.
30°) for around 1 hour or use the drying function.
→"Drying", Page26
Drying
20 Drying
To prevent residual moisture, dry the cooking compartment following microwave-only operation.
20.1 Drying the cooking compartment
WARNING‒Risk of burns!
The appliance becomes hot during operation.
▶ Allow the appliance to cool down before cleaning.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120°C, this will damage the enamel.
▶ Do not use the appliance if there is water on the
cooking compartment floor.
▶ Wipe away any water on the cooking compartment
floor before operation.
Requirement:The cooking compartment has cooled
down.
1.
Remove any food remnants from the cooking compartment.
2.
Dry the cooking compartment with a sponge.
3.
Remove limescale marks with a cloth soaked in vinegar, then wipe with clean water and dry with a soft
cloth.
4.
Leave the cooking compartment to dry with the appliance door open for 1hour or use "Drying function".
→"Setting 'Drying function'", Page26
20.2 Setting "Drying function"
Requirement:→"Drying the cooking compartment",
Page26
1.
Press "Cleaning".
2.
Press "Drying function".
a The duration appears on the display. You cannot
change the duration of the drying function.
3.
Start the drying function using .
a A notification stating that you should carry out the
necessary preparatory work for the drying function
appears on the display.
4.
Press "OK" to confirm the notification.
a The drying function starts. The duration counts down
on the display.
a Once the drying function has run through to the
end, an audible signal sounds.
5.
Leave the appliance door open for 1-2minutes so
that the cooking compartment dries completely.
26
Rails
21 Rails
Rails en
To thoroughly clean the rails and the cooking compartment, or to replace the rails, you can remove the rails.
21.1 Detaching the rails
WARNING‒Risk of burns!
The shelf supports get very hot
▶ Never touch the shelf supports when hot.
▶ Always allow the appliance to cool down.
▶ Keep children at a safe distance.
1.
Lift the rail forwards and detach it .
2.
Swivel the entire rail outwards and unhook it at
the rear .
2.
Hook the front retainers in at the bottom and
straighten them .
3.
Hook the rear retainers with the hook into the top
hole and push them into the bottom hole .
21.2 Fitting the retainers
The retainers may fall out when you detach the rails.
Note:
The retainers at the front differ from those at the rear.
1.
Hook the front retainers with the hook into the round
hole at the top and set them at a slight angle .
Appliance door
22 Appliance door
21.3 Attaching the rails
1.
Set the rear rail at an angle, hooking it into the retainers at the top and bottom .
2.
Pull the rail forwards .
3.
Hook in the rail at the front and press it down .
To clean the appliance door thoroughly, you can disassemble the appliance door.
22.1 Removing the door cover
The stainless steel inlay in the door cover may discolour. Remove the door cover in order to clean it and the
stainless steel inlay, or to remove the door panes.
1.
Open the appliance door slightly.
2.
Press down on the left- and right-hand sides of the
door cover .
27
en Appliance door
3.
Remove the door cover and carefully close the
appliance door.
22.2 Removing the door panes
WARNING‒Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
▶ Do not use any harsh or abrasive cleaners or sharp
metal scrapers to clean the glass on the oven door,
as they may scratch the surface.
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶ Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶ Wear protective gloves.
Requirement:The door cover has been removed.
→"Removing the door cover", Page27
1.
Undo and remove the screws on the left and right
of the appliance door.
2.
Place a folded-up tea towel in the appliance door.
3.
Close the appliance door.
4.
Pull the front pane up and out .
6.
WARNING‒Risk of serious harm to health!
If the screws are undone, the safety of the appliance
can no longer be guaranteed. Microwave energy
may escape.
▶ Never undo the screws.
Never unscrew the four black screws on the frame.
22.3 Fitting the door panes
WARNING‒Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶ Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶ Wear protective gloves.
1.
Attach the front pane downwards into the left- and
right-hand retainers .
2.
Push the front pane to the appliance until the leftand right-hand hook is opposite the support .
5.
Place the front pane down on a flat surface with the
door handle facing down.
28
3.
Push the front pane in at the bottom until you
hear it click into place.
4.
Open the appliance door slightly and remove the
tea towel.
5.
Screw both screws back in on the left and right of
the appliance door.
Troubleshooting en
6.
Put the door cover in position and push down on it
until you hear it click into place.
Troubleshooting
23 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ If the appliance is defective, call Customer Service.
→"Customer Service", Page31
7.
Close the appliance door.
Note:Do not use the cooking compartment again until
the door panes have been correctly fitted.
WARNING‒Risk of electric shock!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ Only use genuine spare parts when repairing the
appliance.
▶ If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufacturer's Customer Service or a similarly qualified person in order to prevent any risk.
23.1 Malfunctions
FaultCause and troubleshooting
The appliance is not
working.
"Sprache Deutsch"
appears in the display.
The operation does
not start or is interrupted.
Appliance does not
heat up.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your room or other appliances are working.
Electronics fault
1.
Disconnect the appliance from the power supply for at least 30 seconds by switching off
the fuse.
2.
Reset the basic settings to the factory settings.
→"Basic settings", Page20
There has been a power cut.
▶
Configure the initial configuration settings.
→"Initial use", Page13
Different causes are possible.
▶
Check the notifications that appear on the display.
→"Displaying information", Page14
Malfunction
▶
Call
→"Customer Service", Page31.
Demo mode is switched on.
1.
Disconnect the appliance from the power supply for at least 30 seconds by switching off
the fuse.
2.
Switch off demo mode in the basic settings within approx.5minutes.
→"Changing basic settings", Page21
There has been a power cut.
▶
Open and close the appliance door once after a power failure.
a The appliance is checked and is ready to use.
29
en Disposal
FaultCause and troubleshooting
The time is not displayed when the appliance is switched
Basic setting has been changed.
▶
Change the basic setting for the clock.
→"Basic settings", Page20
off.
HomeConnect is not
working properly.
During simple microwave operation,
the cooking compartment becomes hot.
Different causes are possible.
▶
Go to www.home-connect.com.
The drying function is switched on.
▶
You can change the basic setting for the drying function during microwave operation.
→"Basic settings", Page20
‒Observe the information on operating with microwave.
→"Microwave", Page15
The interior lighting
does not work.
Basic setting has been changed.
▶
Change the basic setting for the lighting.
→"Basic settings", Page20
The LED light is defective.
▶
Call
→"Customer Service", Page31.
A notification appears
on the display confirming that the maximum operating time
has been reached.
The maximum operating time has been reached. The appliance stops heating.
1.
Press "OK" to confirm the notification about the maximum operating time.
2.
Check whether you still need the appliance.
▶
Set a cooking time so that the operation does not stop.
→"Time-setting options", Page17
The operation stops.The maximum operating time has been reached. The appliance stops heating.
1.
Press to switch off the appliance.
2.
If necessary, press to switch the appliance back on and then restart the operation.
▶
Set a cooking time so that the operation does not stop.
→"Time-setting options", Page17
Error code made up
of letters and numbers appears on the
display, e.g. E0111.
The electronics have detected a fault.
1.
Switch the appliance off and on again.
a If the fault was a one-off, the message disappears.
2.
If the message appears again, call the after-sales service. Please specify the exact error
message when calling.
→"Customer Service", Page31
The cooking result is
not satisfactory.
Settings were unsuitable.
Adjustment values, e.g. temperature or cooking time, depend on the recipe, quantity and
food.
▶
Next time, set lower or higher values.
Tip:A lot of other information about the food preparation and corresponding adjustment
values can be found in the HomeConnect app or on our website www.neff-home.com.
Disposal
24 Disposal
24.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
1.
Unplug the appliance from the mains.
2.
Cut through the power cord.
3.
Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
30
This appliance is labelled in accordance with European Directive
2012/19/EU concerning used electrical and electronic appliances
(waste electrical and electronic equipment - WEEE).
The guideline determines the framework for the return and recycling of
used appliances as applicable
throughout the EU.
Customer Service
25 Customer Service
Customer Service en
Detailed information on the warranty period and terms
of warranty in your country is available from our aftersales service, your retailer or on our website.
If you contact Customer Service, you will require the
product number (E-Nr.), the production number (FD)
and the consecutive numbering (Z-Nr.) of your appliance.
The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our
25.1 Product number (E-Nr.), production
number (FD) and consecutive numbering (ZNr.)
You can find the product number (E-Nr.), the production number (FD) and the consecutive numbering (ZNr.) on the appliance's rating plate.
You will see the rating plate with these numbers if you
open the appliance door.
website.
This product contains light sources from energy efficiency class G. These light sources are available as a
spare part and should only be replaced by trained specialist staff.
Make a note of your appliance's details and the Cus-
tomer Service telephone number to find them again
quickly.
You can also display the appliance information in the
basic settings.
→"Basic settings", Page20
Information regarding Free and Open Source Software
26 Information regarding Free and Open Source Software
This product includes software components that are licensed by the copyright holders as free or open
source software.
The applicable licence information is stored on your
home appliance. You can also access the applicable licence information via your HomeConnect app: "Profile
-> Legal information -> Licence Information".1 You can
download the licence information on the brand product
website. (Please search on the product website for
your appliance model and additional documents). Alternatively, you can request the relevant information
from ossrequest@bshg.com or BSH Hausgeräte GmbH,
Carl-Wery-Str. 34, 81739 Munich, Germany.
The source code will be made available to you on re-
quest.
Please send your request to ossrequest@bshg.com or
BSH Hausgeräte GmbH, Carl-Wery-Str.34, 81739 Mu-
nich, Germany.
Subject: „OSSREQUEST“
The cost of performing your request will be charged to
you. This offer is valid for three years from the date of
purchase or at least as long as we offer support and
spare parts for the relevant appliance.
Declaration of Conformity
27 Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the
essential requirements and other relevant provisions of
Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.neff-home.com among the additional
documents on the product page for your appliance.
pliance with HomeConnect functionality is in compli-
ance with relevant statutory requirements.
2
A detailed Declaration of Conformity can be found on-
line at www.neff-home.com/uk among the additional
documents on the product page for your appliance.
2
2.4 GHz band (2400–2483.5MHz): Max. 100mW
5 GHz band (5150–5350MHz + 5470–5725MHz):
max. 200mW
31
en How it works
ALBAMDMEMKRSUKUA
5GHz WLAN (Wi-Fi): For indoor use only.
27.1 Statement of Compliance for Great
Britain
The full Statement of Compliance according to the
Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable
Products) Regulations 2023 can be found online at
www.neff-home.com/uk/ among the additional documents on the product page for your appliance.
Product type
This statement of compliance covers the products described in this information for use whose model identifier group is seen on the title page. The full model identifier is made up of the characters before the slash in
the product number (E no.) which can be found on the
rating plate. Alternatively, you can also find the model
identifier in the first line of the UK Energy Label.
How it works
28 How it works
Here, you can find the ideal settings for various types
of food as well as the best accessories and cookware.
We have perfectly tailored these recommendations to
your appliance.
Tip:A lot of other information about the preparation,
corresponding adjustment values and recipes can be
found in the HomeConnect app or on our website
www.neff-home.com.
28.1 General cooking tips
Take note of the following information when cooking all
types of food.
¡ The temperature and cooking time depend on the
amount of food and the recipe. Settings ranges are
specified for this reason. Try using the lower values
to start with.
¡ The setting values apply to food placed in the cook-
ing compartment while the cooking compartment is
still cold. If you want to preheat anyway, do not
place accessories into the cooking compartment until it has finished preheating.
¡ Remove any accessories that are not being used
from the cooking compartment.
ATTENTION!
Acidic food may damage the grid
▶ Do not place acidic food, such as fruit or food with
an acidic marinade directly on the pan support.
Information for those allergic to nickel
In rare cases, small amounts of nickel may pass into
the food.
You can buy suitable accessories from customer service, from specialist retailers or online.
→"Other accessories", Page13
Tip
For some food, you can use the ventilation function
"Crisp Finish".For some food, you can use the ventilation function . The ventilation function "Crisp Finish" ex-
Name and address of manufacturer
BSH Hausgeräte GmbH, Carl-Wery-Strasse 34, 81739
München, Germany
This statement of compliance is prepared by the manufacturer.
The manufacturer, BSH Hausgeräte GmbH deems that
it has complied with
¡ provision 5.1-1 of ETSI EN 303 645 v2.1.1 and,
where relevant, provision 5.1-2 of ETSI EN 303 645
v2.1.1;
¡ provision 5.2-1 of ETSI EN 303 645 v2.1.1;
¡ provision 5.3-13 of ETSI EN 303 645 v2.1.1.
Support period
BSH Hausgeräte GmbH will provide security updates
that are necessary to maintain the main functions free
of charge until at least 28/02/2034.
tracts moisture from the cooking compartment with increased intensity. This method is recommended for
food with lots of moisture, e. g.
¡ for cooking on several levels
¡ for baked items with a moist toppings
¡ for meringue pastry
¡ when increased crispiness is required
For crispier food, we recommend switching this on in
the second half of the cooking time.
→"Ventilation function 'Crisp Finish'", Page16
28.2 Baking tips
¡ Dark-coloured metal baking tins are most suitable
for baking cakes, bread and other baked goods.
¡ Use wide, shallow cookware for bakes and gratins.
Food takes longer to cook in deep, narrow cookware and it browns more on top.
¡ If you are cooking bakes directly in the universal
pan, place the universal pan into the cooking compartment at level1.
¡ The setting values for bread dough apply to both
dough placed on a baking tray and dough placed in
a loaf tin.
¡ The recommended settings for baking in combina-
tion with the microwave mode are for metal baking
tins.
ATTENTION!
When the cooking compartment is hot, any water inside it will create steam. The change in temperature
may cause damage.
▶ Never pour water into the cooking compartment
when it is still hot.
▶ Never place cookware containing water on the
cooking compartment floor.
Shelf positions
You will obtain the best results if you use the following
shelf positions.
32
How it works en
If you are baking on one level, use shelf position 1.
Baking on 2levelsHeight
Universal pan
Baking tray
Baking tins/dishes on two wire racks 3
Use the hot air heating function.
Notes
¡ Items that are placed in the appliance on baking
trays or in baking tins/dishes at the same time will
not necessarily be ready at the same time.
¡ If you opt for cooking in combination with the mi-
crowave mode, you can only cook on one level.
3
1
1
28.3 Roasting, braising and grilling tips
¡ The recommended settings are for fridge-temperat-
ure food and unstuffed, oven-ready poultry.
¡ Place the poultry onto the cookware breast-side or
skin-side down.
¡ Turn roasting joints, grilled items or whole fish after
approx. ½ to ⅔ of the specified time.
Roasting on the wire rack
Food roasted on the wire rack will become very crispy
on all sides. You can roast large poultry, for example,
or multiple individual pieces at the same time.
¡ Roast pieces of a similar weight and thickness. The
grilled food will brown evenly and will remain succulent and juicy.
¡ Place the food to be roasted directly on the wire
rack.
¡ To catch any liquids that drip down, place the uni-
versal pan into the cooking compartment one level
below the wire rack.
¡ Add up to ½litre of water to the universal pan, de-
pending on the size and type of food that you want
to roast.
You can make a sauce from the juices that are collected. This also means that less smoke is produced and the cooking compartment does not become as dirty.
Roasting in cookware
If you cover the cookware when you cook your food,
this will keep the cooking compartment cleaner.
General information about roasting in cookware
¡ Use heat-resistant, ovenproof cookware.
¡ Place the cookware on the wire rack.
¡ Glass cookware is best.
¡ Follow the manufacturer's instructions for your roast-
ing dishes.
Roasting in uncovered cookware
¡ Use a deep roasting dish.
¡ If you do not have any suitable cookware, you can
use the universal pan.
Roasting in covered cookware
¡ Use a suitable lid that seals well.
¡ When roasting meat, there should be at least 3cm
between the food and the lid. The meat may expand.
WARNING‒Risk of scalding!
Very hot steam may escape when the lid is opened
after cooking. Steam may not be visible, depending on
the temperature.
▶ Lift the lid in such a way that the hot steam can es-
cape away from you.
▶ Keep children away from the appliance.
Grilling
Grill food if you want it to be crispy.
The "Grill" type of heating is good for cooking thinner
pieces of poultry, meat and fish such as steaks, drum-
sticks and burgers. It is also excellent for toasting
bread.
Circo-roasting is very well suited to cooking whole
poultry and fish, as well as meat, e.g. roast pork with
crackling.
¡ When grilling several food items, choose pieces that
are of a similar weight and thickness. The grilled
food will brown evenly and will remain succulent
and juicy.
¡ Place the food to be grilled directly onto the wire
rack.
¡ To catch any liquids that drip down, place the uni-
versal pan into the cooking compartment at least
one level below the wire rack.
Notes
¡ The grill element switches on and off continuously.
This is normal. The temperature that you set determines how frequently this occurs.
¡ Smoke may be produced when grilling.
28.4 Microwave cooking
If you cook food using the microwave mode, you can
reduce the cooking time considerably.
General information
¡ When using the microwave mode, the cooking time
is determined based on the total weight.
If you want to cook a quantity that differs from the
specified quantity, the general rule is Double the
quantity requires just under double the cooking
time.
¡ The food transfers heat to the cookware. The cook-
ware may become very hot.
¡ The main part of the instruction manual contains in-
formation on how to configure the microwave and
microwave boost oven settings.
→"Microwave", Page15
Tip
You can find more microwave recipes here:
¡ →"Defrosting", Page38
¡ →"Warming up food using the microwave mode",
Page38
Cooking, braising or steaming using the
microwave mode
¡ Use microwave-safe cookware with a lid. Alternat-
ively, you can use a plate or special microwaveable
film to cover the dish.
33
en How it works
¡ For cereal products, e.g. rice, use deep cookware
with a lid. Cereal products foam a lot during cooking. Add liquid in accordance with the instructions
and information provided in the recommended settings tables.
¡ Do not wash or dry food. Add 1-3 tablespoons of
water or lemon juice to the food.
¡ Spread the food out so that as much of it as pos-
sible is in contact with the bottom of the cookware.
Food that is in contact with the bottom will cook
more quickly than food that is piled up.
¡ Use salt and seasoning sparingly. When cooking
food using the microwave mode, most of the food's
natural flavour will be retained.
¡ Turn or stir the food 2-3times during cooking.
¡ After cooking, leave the food to rest for 2-3minutes.
28.5 Cooking instructions for ready meals
¡ The cooking result greatly depends on the quality of
the food. Pre-browning and irregularities may
already be present in the food before cooking.
¡ Do not use frozen products that are covered with a
thick layer of ice. Remove any ice on the food.
¡ Take ready meals out of the packaging.
¡ If you are warming or cooking the ready meal in
cookware, make sure that the cookware is heat-resistant.
¡ Distribute foods that are in the form of separate
pieces, such as bread rolls and potato products, so
that they are spread out flat and evenly on the accessory. Leave a little space between the individual
pieces.
¡ Follow the manufacturer's instructions on the pack-
aging.
¡ To achieve best results, we recommend that you re-
heat food or ready meals at 600 watts. If the packaging specifies a higher microwave output setting,
extend the time.
28.6 List of foods
Recommended settings for a variety of foods, sorted into food categories.
ware
Burger, 3–4cm thickPan support2290-20-30
Leg of lamb, boned, me-
dium, 1.5kg
Leg of lamb, boned, me-
dium, 1.5kg
Meat loaf, 1kg + 50ml
water
Fish, grilled, whole,
300g, e.g. trout
Fish, grilled, whole,
Uncovered cook-
1170-190-50-70
ware
Covered cookware1240-2601. 360
2. 180
Uncovered cook-
1170-19036030-40
ware
Uncovered cook-
1170-190-20-30
ware
Pan support22509015-20
2
1. 30
2. 35-40
300g, e.g. trout
Vegetables, fresh, 250gCovered cookware1-6008-12
Mixed vegetables, 250g,
Covered cookware1-60010-14
3
3
+ 25ml water
Baked potatoes, halved,
Universal pan2200-22036015-20
1 kg
Peeled boiled potatoes,
Covered cookware1-60012-15
3
quartered, 500g
Long-grain rice, 250g +
500ml water
Millet, whole, 250g, +
600ml water
Polenta or maize semo-
Covered cookware1-1. 600
2. 180
Covered cookware1-1. 600
2. 180
1. 7-9
2. 13-16
1. 8-10
2. 10-15
Covered cookware1-6006-8
3
lina, 125g + 500ml water
1
Preheat the appliance.
2
Turn the dish 2/3 of the way through the cooking time.
3
Stir the food one or two times during cooking.
Desserts
Making yoghurt
1.
Remove the accessories and shelves from the
cooking compartment.
2.
Heat 1litre of whole milk (3.5% fat) to 90°C on the
hob and then leave it to cool down to 40°C.
It is sufficient to heat UHT milk to 40°C.
3.
Mix 150g of chilled yoghurt into the milk.
4.
Pour the mixture into small containers, e.g. cups or
small jars.
5.
Cover the containers with film, e.g. cling film.
6.
Place the containers on the cooking compartment
floor.
7.
Use the recommended settings when configuring
the appliance settings.
8.
After making the yoghurt, leave it to cool in the refrigerator for at least 12hours.
36
Making blancmange from blancmange powder
1.
Use a deep, microwave-safe receptacle.
2.
Pour the blancmange powder and all of the milk
and sugar into the receptacle and mix.
3.
Place the receptacle onto the wire rack and slide
the rack into the cooking compartment.
4.
Use the recommended settings when configuring
the appliance settings.
5.
As soon as the milk starts to rise, stir thoroughly.
6.
Repeat the process until the required consistency is
achieved.
Using the microwave mode to make popcorn
WARNING‒Risk of burns!
Airtight packaging may burst when food is heated.
▶ Always follow the instructions on the packaging.
▶ Always use oven gloves to remove the dishes from
the cooking compartment.
1.
Use a microwave-safe, shallow ovenproof dish.
Do not use porcelain or deep plates.
2.
Place the popcorn bag onto the cookware in accordance with the instructions on the packaging.
Recommended settings for desserts and compote
How it works en
3.
Use the recommended settings when configuring
the appliance settings.
4.
The time may need to be adjusted, depending on
the product and quantity in question.
5.
Remove the popcorn bag after 1½minutes and
shake it to ensure that the popcorn does not burn.
6.
Place the popcorn bag back into the oven and
leave it to continue popping.
7.
Once you can only hear popping noises once every
2-3seconds, switch off the appliance and take the
popcorn bag out of the oven.
8.
Wipe the cooking compartment clean afterwards.
FoodAccessory/cook-
ware
Blancmange made from
Covered cookware1-6005-8
Shelf position
blancmange powder
YoghurtIndividual mouldsCooking
compartment floor
Microwave popcorn, 1 x
100g bag
1
Stir the food one or two times during cooking.
2
Place the sealed bag on the cookware.
2
Uncovered cookware
1-6004-6
28.7 Special cooking methods and other
applications
Information and recommended settings for special
cooking methods and other applications, e.g. low-temperature cooking.
Low-temperature cooking
For all prime cuts which are to be cooked rare or "à
point". When slow cooking at low temperatures, meat
and poultry remain juicy and tender.
Low-temperature cooking poultry or meat
Note:When using the low-temperature cooking type of
heating, you cannot delay the start of the programme
by setting an end time.
Requirement:The cooking compartment is cold.
1.
Use fresh, hygienically perfect meat. Pieces without
bones and without a lot of connective tissue are
most suitable.
2.
Place the cookware onto the wire rack at level 1 in
the cooking compartment.
3.
Preheat the cooking compartment and cookware for
approx. 15minutes.
4.
Sear the meat on all sides on the hob at a very high
heat.
Heating
function
Temperature in°CMicrowave
power setting
in W
Cooking
time in
mins
1
40-45-8-9 hrs
5.
Immediately place the meat into the pre-warmed
cookware in the cooking compartment.
To ensure that the temperature in the cooking compartment remains constant, keep the cooking compartment door closed during low-temperature cooking.
Tips for low-temperature cooking
Here you will find tips for achieving good results when
low-temperature cooking food.
IssueTip
You want to cook a
duck breast at a low
temperature.
¡ Place the cold duck breast
into a pan.
¡ Sear the skin side first.
¡ Cook the duck breast at low
temperature.
¡ After low-temperature cook-
ing, grill the duck breast for
3 to 5minutes until crispy.
You want to serve
your low-temperature cooked meat as
hot as possible.
¡ Preheat the serving plate.
¡ Make sure that the accom-
panying sauces are very hot
when you serve them.
37
en How it works
Recommended settings for low-temperature cooking
FoodAccessory/
cookware
HeightSearing
time in
mins
Duck breast, medium
rare, 300g each
Fillet of pork, wholeUncovered
Uncovered
cookware
16-895
14-685
cookware
Fillet of beef, 1kgUncovered
14-685
cookware
Veal medallions,
4cm thick
Saddle of lamb,
boned, 200g each
1
Preheat the appliance.
Uncovered
cookware
Uncovered
cookware
1480
1485
Defrosting
You can defrost frozen food in your appliance.
Tips for defrosting food
¡ You can use the "microwave" mode to defrost
frozen fruit, vegetables, poultry, meat, fish or baked
goods.
¡ Remove frozen food from its packaging before you
defrost it.
¡ Use heat-resistant, microwave-safe cookware.
¡ The recommended settings are for freezer-temperat-
ure food (-18°C).
Type of
heating
Temperature in °C
Microwave
Cooking time
in mins
power
setting in
W
1
1
1
1
1
-45-60
-45-70
-90-120
-40-60
-30-45
¡ Defrosting works best if you divide it into more than
one step. The steps are listed one after the other in
the recommended settings tables.
¡ Stir or turn the food 1-2times during defrosting.
Turn large items several times. Split the food into
smaller pieces as it defrosts.
Remove pieces that have already defrosted from the
cooking compartment.
¡ Once the food has defrosted, switch off the appli-
ance and leave the food in the appliance for another
10 to 30minutes to allow the temperature to equalise.
Recommended settings for defrosting food
FoodAccessory/cook-
ware
Shelf position
Type of
heating
Temperature in°CMicrowave
power setting
in W
Cooking
time in
mins
Bread rollsPan support1140-160902-4
Warming up food using the microwave mode
You can use the microwave mode to warm up food or
to defrost and warm up food in a single step.
Tips for warming up food using the microwave mode
¡ Use microwave-safe cookware with a lid.
¡ Turn or stir the food 2-3times during warming.
¡ After warming up the food, leave it to rest for
1-2minutes.
¡ The food transfers heat to the cookware. The cook-
WARNING‒Risk of scalding!
There is a possibility of delayed boiling when a liquid is
heated. This means that the liquid reaches the boiling
temperature without the usual steam bubbles rising to
the surface. Exercise caution even when only gently
shaking the container. The hot liquid may suddenly boil
over and splatter.
▶ Always place a spoon in the container when heating
liquids. This prevents delayed boiling.
ware can become very hot.
¡ Make sure that you do the following when you are
warming up baby food:
– Place bottles on the wire rack without the teat or
lid.
– Shake or stir the baby food well after warming it
up.
– Always check the temperature of the baby food.
¡ Wipe the cooking compartment dry after using it to
warm up food.
38
ATTENTION!
Metal touching the wall of the cooking compartment
will cause sparks, which may damage the appliance or
the inner door pane.
▶ Metal (e.g. a spoon in a glass) must be kept at least
2cm from the cooking compartment walls and the
inside of the door.
Recommended settings for heating and reheating
How it works en
FoodAccessory/cook-
ware
Bakes, 400g, e.g.
lasagne, potato gratin,
Uncovered cookware
Shelf position
Type of
heating
Temperature in°CMicrowave
power setting
in W
Cooking
time in
mins
1180-20018020-25
frozen
Keeping food warm
Tips for keeping food warm
¡ Using the "Keep warm" heating function prevents
condensation from forming. You will not have to
wipe down the cooking compartment.
¡ To prevent the food from drying out, you can cover
it.
¡ Do not keep food warming for longer than 2 hours.
¡ Be aware that some types of food will actually con-
tinue cooking when you are keeping them warm in
the oven.
28.8 Test dishes
The information in this section is provided for test institutes to facilitate testing of the appliance in accordance with
EN 60350-1 or IEC 60350-1 and EN 60705 or IEC 60705.
Baking
¡ The setting values apply to food that is placed into a
cold cooking compartment.
¡ Take note of the information on preheating in the re-
commended settings tables. These setting values
apply without rapid heat-up.
¡ For baking, use the lower of the temperatures indic-
ated first.
¡ Items that are placed in the appliance on baking
trays or in baking tins/dishes at the same time will
not necessarily be ready at the same time.
¡ Shelf positions when baking on 2levels:
– Universal pan: Shelf position3
Baking tray: Shelf position1
¡ Hot water sponge cake
– When baking on 2levels, place the springform
tins at diagonally opposite corners of the wire
racks.
– As an alternative to a pan support, you can also
use the Air Fry baking tray offered by us.
Recommended settings for baking
FoodAccessory/cook-
ware
Shelf position
Heating
function
Temperature in°CMicrowave
ShortbreadBaking tray1150-160
ShortbreadBaking tray1140-150
Small cakesBaking tray1160
Small cakesBaking tray1150
Small cakes, 2 levelsUniversal pan
3+1140
1
1
1
+
Baking tray
Hot water sponge cakeSpringform cake
1160-170
tin, diameter 26 cm
Hot water sponge cakeSpringform cake
1160-170
tin, diameter 26 cm
1
Preheat the appliance for five minutes. Do not use the rapid heating function.
2
Preheat the appliance. Do not use the rapid heating function.
Cooking
power setting
in W
1
1
-20-30
-25-35
time in
mins
-25-35
-20-30
-30-40
2
2
-25-35
-30-45
39
en Installation instructions
Grilling
Recommended settings for grilling
FoodAccessories/cook-
ware
Shelf position
Heating
function
Temperature in°CMicrowave
Toasting breadPan support3290
1
Do not preheat the appliance.
Microwave cooking
¡ To test the microwave mode on its own, switch off
the drying function in the basic settings. →Page20
Recommended settings for defrosting food using the microwave
FoodAccessory/cook-
ware
MeatUncovered cook-
ware
Recommended settings for cooking food using the microwave
FoodAccessory/cook-
ware
CustardUncovered cook-
ware
SpongeUncovered cook-
ware
Meat loafUncovered cook-
ware
Shelf position
Heating
function
Temperature in°CMicrowave
1-1. 180
Shelf position
Heating
function
Temperature in°CMicrowave
1-1. 360
1-6007-9
1-60022-27
Cooking
power setting
inW
1
-3-6
time in
mins
Cooking
power setting
in W
time in
mins
1. 5
2. 90
2. 10-15
Cooking
power setting
in W
time in
mins
1. 20
2. 180
2. 20-25
Recommended settings for cooking in combination with the microwave
FoodAccessory/cook-
ware
Potato gratinUncovered cook-
Shelf position
Heating
function
Temperature in°CMicrowave
1150-17036025-30
ware
CakesUncovered cook-
1190-21018012-18
ware
Chicken, halvedUncovered cook-
1180-20036025-35
ware
Installation instructions
29 Installation instructions
Observe this information when installing the appliance.
power setting
in W
Cooking
time in
mins
40
Installation instructions en
29.1 Scope of delivery
After unpacking all parts, check for any damage in
transit and completeness of the delivery.
Depending on the appliance configuration, different
handles and panels can be used. An example is shown
in the picture.
29.2 General installation instructions
Follow these instructions before you start installing the appliance.
¡ The installation cabinet must not have a
back panel behind the appliance. There
should be a gap of at least 35mm
between the wall and the cabinet base as
well as the rear panel of the cabinet situated above.
¡ Ventilation slots and intake openings must
not be covered.
¡ The safe operation of this appliance can
only be guaranteed if it has been installed
to a professional standard in accordance
with these installation instructions. The installer shall be liable for damages incurred
as a result of incorrect installation.
¡ Check the appliance for damage after un-
packing it. Do not connect the appliance if
it has been damaged in transit.
¡ Before starting up the appliance, remove
any packaging material and adhesive film
from the cooking compartment and the
door.
¡ Proceed in accordance with the installation
sheets for installing accessories.
¡ Fitted units must be heat-resistant up to
95°C, and adjacent unit fronts up to
70°C.
¡ Do not install the appliance behind a decor-
ative door or the door of a kitchen unit.
There is a risk of overheating.
¡ Cut-out work on the units should be carried
out before installing the appliance. Remove
any shavings. Otherwise, the correct operation of electrical components may be adversely affected.
¡ The mains socket for the appliance must
either be located in the hatched area or
outside of the area where the appliance is
installed.
Any unsecured units must be secured to
the wall using a standard bracket .
¡ Wear protective gloves so that you do not
cut yourself. Parts that are accessible during installation may have sharp edges.
¡ Dimensions of the figures in mm.
WARNING‒Risk of fire!
It is dangerous to use an extended power
cord and non-approved adapters.
▶ Do not use extension cables or multiple
socket strips.
▶ Only use adapters and power cords ap-
proved by the manufacturer.
▶ If the power cord is too short and a longer
one is not available, please contact an
electrician to have the domestic installation
adapted.
ATTENTION!
Carrying the appliance by the door handle
could break it. The door handle cannot support the weight of the appliance.
▶ Do not carry or hold the appliance by the
door handle.
41
en Installation instructions
29.3 Appliance dimensions
You will find the dimensions of the appliance here
29.4 Installation below a worktop
Observe the installation dimensions and the installation
instructions when installing below a worktop.
¡ To ventilate the appliance, the intermediate floor
must have a ventilation cut-out.
¡ The worktop must be secured to the fitted unit.
¡ Observe any available installation instructions for the
hob.
¡ Observe different national installation instructions for
the hob.
29.5 Installation underneath a hob
If the appliance is installed under a hob, the following
minimum dimensions must be adhered to (including
substructure, if applicable).
Hob typea raised in mma flush in mmb in mm
Induction hob42435
Full-surface induction hob52535
Gas hob32435
Electric hob32352
1
Observe different national installation instructions for the hob.
The minimum worktop thickness a is based on the
required minimum clearance .
1
42
Installation instructions en
29.6 Installation in a tall unit
Observe the installation dimensions and the installation
instructions when installing in a tall unit.
¡ To ventilate the appliance, the intermediate floors
must have a ventilation cut-out.
¡ In order to ensure sufficient ventilation of the appli-
ance, there must be a ventilation opening of at least.
200cm² in the base area. To do this, trim the base
panel or fit a ventilation grille. Ensure that the air exchange is guaranteed in accordance with the diagram.
¡ To ensure that the appliance door can be opened,
you must take the minimum dimensions into consideration when installing in a corner. The dimension
is dependent on the thickness of the unit front and
the handle.
29.8 Electrical connection
In order to safely connect the appliance to the electrical system, follow these instructions.
¡ The appliance corresponds to protection class I and
must only be operated with a protective earth connection.
¡ The fuse protection must correspond to the power
rating specified on the appliance's rating plate and
to the local regulations.
¡ The appliance must be disconnected from the
power supply whenever installation work is being
carried out.
¡ The appliance must only be connected using the
power cable provided.
¡ The power cable must be plugged in at the rear of
the appliance until you hear a clicking sound. A 3 m
power cable can be obtained from the after-sales
service.
¡ The power cable must only be replaced with a cable
from the original manufacturer. This is available from
after-sales service.
¡ Contact protection must be guaranteed by the in-
stallation.
¡ If the display on the appliance remains dark, it has
not been connected correctly. Disconnect the appliance from the mains and check the connection.
¡ If the tall unit has another back panel in addition to
the element back panels, this must be removed.
¡ Only fit the appliance up to a height which allows
accessories to be easily removed.
29.7 Corner installation
Observe the installation dimensions and the installation
instructions when installing in a corner.
Electrically connect the appliance with the
protective contact plug
Note:The appliance must only be connected to a pro-
tective contact socket that has been correctly installed.
▶
Insert the plug into the protective contact socket.
When the appliance is installed, the mains plug of
the power cord must be freely accessible. If free access is not possible, an isolating switch must be integrated into the permanent electrical installation according to the installation regulations.
Electrically connecting an appliance without a
protective contact plug
Note:Only licensed specialists may connect the appli-
ance. Damage caused by incorrect connection is not
covered under the warranty.
An isolating switch must be integrated into the permanent electrical installation according to the installation
regulations.
1.
Identify the phase and neutral conductors in the
socket.
The appliance may be damaged if it is not connected correctly.
2.
Connect the hob in accordance with the connection
diagram.
See the rating plate for the voltage.
3.
Connect the wires of the mains power cable according to the colour coding:
‒ Green/yellow = Protective conductor
‒ Blue = Neutral conductor
‒ Brown = Phase (external conductor)
43
en Installation instructions
29.9 Installing the appliance
WARNING‒Risk of injury!
Opening the appliance door without installing the door
handle and panels may result in injury.
▶ Operate the appliance only with the door handle
and the panels fitted.
Notes
¡ Do not use a cordless screwdriver to secure the
door handle. This may become damaged.
¡ Further information:
1.
Open the appliance door slightly and pull the red triangular transport locks to the outside.
2.
Remove the two transport locks.
‒ Press on the sloped surface on the rear of the
transport lock .
‒ Press and hold the sloped surface and pull the
transport lock downwards and out .
5.
Tighten the screws until the door handle is secured.
6.
Push the appliance in fully.
Do not kink or trap the connection cable, or route it
over sharp edges.
7.
Centre the appliance.
3.
Unscrew the screws on the door handle a little .
4.
Attach the door handle .
‒ The larger hole must be be directed inwards.
‒ Check whether the silicone base is between the
panel and the door handle.
There must be an air gap of at least 4mm between
the appliance and adjacent unit fronts.
8.
Attach the four fastening elements. →Page45
9.
Screw the appliance into place.
44
Installation instructions en
10.
Push on the left- and right-hand panels at the height
of the fastening elements until a clicking sound is
heard.
‒ The panel with the sticker is intended for the left-
hand side of the inside.
a The panels are engaged.
11.
Check whether the left- and right-hand panels are
vertically aligned.
12.
If necessary, align the panels. →Page45
Note:The gap between the worktop and the appliance
must not be closed by additional battens.
Thermal insulation strips must not be fitted to the side
panels of the surround unit.
3.
Secure the appliance using a suitable screw.
29.11 Attaching the fastening elements
In order to attach the panels, the four fastening elements must be fitted beforehand.
1.
Push the eccentric forwards from the fastening element .
2.
Push the eccentric backwards from the fastening
element .
a The eccentric breaks off.
3.
Push the eccentric backwards into the fastening element .
29.10 For handleless kitchens with vertical
bar handle strips:
1.
Attach a suitable filling piece in order to cover any
sharp edges and to guarantee a safe installation.
2.
Pre-drill aluminium profiles to establish a screw connection.
4.
Attach the red fastening elements at the top.
Attach the green fastening elements at the bottom.
5.
Slide in the fastening element at the bottom and
press down at the top until it clicks into place.
29.12 Aligning the panels
ATTENTION!
Unsuitable tools may damage the surface of the appliance.
▶ Only use plastic tools.
▶ Do not use pointed or sharp tools.
45
en Installation instructions
1.
Slide a plastic tool, e.g. one of the other fastening
elements, into the gap between the appliance and
the panel.
2.
Pull the tool from the appliance with panel; a clicking noise can be heard when this is loosened.
3.
Turn the fastening element to the left or right to adjust the alignment of the panels.
4.
Refit the panels.
29.13 Removing the door handle and side
panels
ATTENTION!
Unsuitable tools may damage the surface of the appliance.
▶ Only use plastic tools.
▶ Do not use pointed or sharp tools.
1.
Loosen the screws on the door handle and remove
the door handle.
2.
Remove the left- and right-hand panels using a
plastic tool.
29.14 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Remove the left- and right-hand panels.
3.
Undo the fastening screws.
4.
Lift the appliance slightly and pull it out completely.
46
Valid within Great Britain:
Imported to Great Britain by
BSH Home Appliances Ltd.
Grand Union House
Old Wolverton Road
Wolverton, Milton Keynes
MK12 5PT
United Kingdom
*9001696876*
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München, GERMANY
9001696876
040322
en
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.