Nedap N V SMARTDEAC User Manual
EN
Pulse Listen Deactivation
MANUAL SMART DEAC
2009-06-25 Part#: 9937676
This information is furnished for guidance, and with no guarantee as to its accuracy or completeness;
Its publication conveys no license under patent or other right, nor does the publisher assume
Liability for any consequence of its use; specifications and availability of goods mentioned in it are
Subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the
publisher.
© N.V. Nederlandsche Apparatenfabriek “Nedap”
Technical Support
info-rs@nedap.com
Postal address
N.V. Nederlandsche Apparatenfabriek “NEDAP”, Parallelweg 2, 7141DC, Groenlo, The Netherlands
Fax
+31 (0) 544-46 34 75
Safety precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED NEDAP SERVICE PERSONNEL.
Lightning flash with an arrowhead, enclosed in a triangle, alerts you to the
presence of uninsulated voltage points inside the product which could cause a
serious electrical shock.
An exclamation mark enclosed in a triangle alerts you to important operating and
maintenance instructions in the documentation provided with the product.
WARNING! To avoid the risk of fire or electrical shock, never expose these products to water or
operate in a high humidity environment.
This European Standard specifies a marking
of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC
(WEEE); This is in addition to the marking requirement in Article 10(3) of this Directive which
requires producers to mark electrical and electronic equipment put on the market after 13
August 2005 with a ‘crossed-out wheeled bin’ symbol.
that applies to electrical and electronic equipment falling under Annex IA of Directive
2002/96/EC, provided the equipment concerned is not part of another type of equipment that
EN 50419:2005
© 2009 N.V. Nederlandsche Apparatenfabriek “NEDAP” Parallelweg 2, NL-7141 DC Groenlo
The software / hardware described in this book / file is furnished under a license agreement and may be used only in accordance
with the terms of the agreement.
Copyright Notice
All Rights Reserved. Any technical documentation that is made available by N.V. Nederlandsche Apparatenfabriek “NEDAP” is the
copyrighted work of N.V. Nederlandsche Apparatenfabriek “Nedap” and is owned by N.V. Nederlandsche Apparatenfabriek
“Nedap”.
does not fall within the scope of this Directive. Annex IB of Directive 2002/96/EC contains an
indicative list of the products, which fall under the categories set out in Annex IA of this
Directive;
that serves to clearly identify the producer of the equipment and that the equipment has been
put on the market after 13 August 2005.
16-manual smart deac cgdsmartdeac.doc | Nedap Retail Support
2
No warranty
The technical documentation is being d elivered to you and Nedap makes no warranty as to its accuracy or use. Any use of the
technical documentation or the information contained therein is at the risk of the user. Documentation may include technical or
other inaccuracies or typographical errors Nedap the right to make changes without prior notice. No part of this publication may
be copied without the express written permission of N.V. Nederlandsche Apparatenfabriek “Nedap” Parallelweg 2, NL-7141DC,
Groenlo, Netherlands.
Trademarks
Nedap, the Nedap logo, Nedap EASi/Net and the Nedap EASi/Net are registered trademarks of Nedap N.V. Nederlandsche
Apparatenfabriek “Nedap”
Other product names mentioned in this manual ma y b e trademarks or registered trademarks of their respective companies and
are hereby acknowledged.
Printed in the Netherlands
Notice
The documentation is based in a Part numbers and Drawing number structure.
Part number can also be named as Artikel nummer or Article number
Drawing numbers can also be named as: Tekening
Drawing numbers are build up in a the drawing Number with a structure Txxxx-yyy-zz
Txxxx-yyy is the drawing number and extension number zz means:
10 is an overview drawing of the part and can contain wiring and circuit diagrams;
11 is the bill of material;
12 is the circuit diagram of the device.
Xxxx = 0000 – 9999
yyy = 000-999
16-manual smart deac cgdsmartdeac.doc | Nedap Retail Support
3
Loading...