Product Description and Notes Page 1
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front, Top & Right Side Page 3
Rear & Bottom
Display Dimensions w/Optional Speakers and Stand
Optional Table Top Stand Dimensions
Optional Speaker Dimensions
Dimensions with Optional Wall Mount
Control Codes
Product Description
Type: LCD Display Screen Surface: Anti-Reflective
Resolution: 1920 x 1080 Dimensions: 36.2”(W) x 21.0”(H) x 5.5”(D)
920mm(W) x 532mm(H) x 140mm(D)
Aspect Ratio: 16:9 Weight: 52.9 lbs / 24.0 kg
FCC: Class B
Power Consumption: 330W (max) BTU’s: 1126 BTU/hour
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
Page 1
Page 2
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
www.necdisplay.com
Max. 20 deg
P401 Page 1 of 9
NEC Displa
y Solutions of America, Inc.
P401 Installation Guide
40” LCD Display Rev 1.0
Ventilation Requirements (all models)
Dimensions below are minimum required for proper ventilation.
WALL
5 to 40 degC
o 104 degF
50mm
2”
50mm
2”
41 t
WALL WALL
2”
50mm
2”
50mm
2”
NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the
opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for
50mm
design review and recommendations.
www.necdisplay.com
P401 Page 2 of 9
NEC Displa
y Solutions of America, Inc.
P401 Installation Guide
40” LCD Display Rev 1.0
Display dimensions
(PANEL DISPLAY AREA)
(PANEL DISPLAY AREA)
Ambient Sensor
LED
IR Receiver
www.necdisplay.com
P401 Page 3 of 9
NEC Display Solutions of America, Inc.
P401 Installation Guide
40” LCD Display Rev 1.0
Display dimensions (cont.)
Power Switch
AC Inlet
300mm MOUNTING HOLE PATTERN
for MOUNT UNIT (4-M6 Depth 12mm)
www.necdisplay.com
P401 Page 4 of 9
NEC Displa
y Solutions of America, Inc.
P401 Installation Guide
40” LCD Display Rev 1.0
Dimensions with optional speakers and stand
www.necdisplay.com
P401 Page 5 of 9
NEC Displa
y Solutions of America, Inc.
P401 Installation Guide
40” LCD Display Rev 1.0
Optional Table Top Stand Dimensions (ST-4020)
1.86
3.483.52
0.834.94
0.69
0.51
1.40
13.00
6
3
.
2
Table Top Stand
ST-4020
0.83
0
0
.
5
2.89
www.necdisplay.com
P401 Page 6 of 9
NEC Displa
y Solutions of America, Inc.
P401 Installation Guide
40” LCD Display Rev 1.0
Optional Speaker Dimensions (SP-P4046)
Optional Speakers
SP-P4046
www.necdisplay.com
Input Terminal
P401 Page 7 of 9
NEC Displa
y Solutions of America, Inc.
P401 Installation Guide
40” LCD Display Rev 1.0
Dimensions with Optional Wall Mount Kit (WMK3260-L)
NOTE: If so desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND).
www.necdisplay.com
P401 Page 9 of 9
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.