NEC OL-V323-2 Installation Manual

1

NEC Display Solutions of America, Inc.

OL-V323-2 Installation Guide

10 Point Touch Overlay for the V323-2 Rev.1.2

1.0 Contents

Guide Purpose Page 1
Notes and Warnings Page 1
Equipment Page 2
Dimensional Drawings Page 2
Integration Procedures Page 3-4

2.0 Purpose

2.1 This procedure describes the steps to install the OL-V323-2 IR Touch Overlay onto the V323-2 display.

3.0 Notes and Warnings

3.1 The overlay contains tempered glass. Use caution when handling.

3.2 The overlay has an integrated USB cable located in the bottom right corner. Ensure the cable is not

pinched, crushed, or damaged during installation.

3.3 Ensure the touch screen frame does not bend or torque during installation.

3.4 Once the touch screen is installed, do not lift the monitor by grasping or holding only the touch screen

overlay. Grasp both the monitor and overlay to support the unit weight.

3.5 Contact NEC Display Solutions support if you have any questions or require additional installation

guidance support.

500 Park Boulevard, Suite 1100
Itasca, IL 60143
Phone: [phone]

www.necdisplay.com OL-V323-2

2

NEC Display Solutions of America, Inc.

OL-V323-2 Installation Guide

10 Point Touch Overlay for the V323-2 Rev.1.2

4.0 Equipment

4.1 (1) OL-V323-2 IR touch screen overlay

(4) Bezel retention brackets for OL-V323-2

Note: Brackets attached to the overlay

(1) 6-32 x 3/8" Undercut Phillips Machine Screws

Note: Quantity (1) Machine Screw Provided as Spare

(1) 10ft. USB Extension Cable

5.0 Dimensional Drawings

www.necdisplay.com OL-V323-2