Product Description and Notes Page 1
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Front, & Right Side Page 3
Rear
Display Dimensions w/Optional Speakers and Stand
Table Top Stand Dimensions
Optional Speaker Dimensions
Dimensions w/Peerless Fixed Wall Mount
Dimensions w/Peerless Tilt Wall Mount
Control Codes
Product Description
Type: LCD Display Screen Surface: Anti-Reflective
Resolution: 1920 x 1080 Dimensions: 61.8”(W) x 36.3”(H) x 8.7”(D)
Aspect Ratio: 16:9 Weight: 183.0 lbs
FCC: Class B
Power Consumption: 590W (max) BTU’S: 2013 BTU/hour
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Do not install in the portrait position.
Landscape 20deg
Page 1
Page 2
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
www.necdisplay.com
Max. 20 deg
LCD6520L-BK Page 1 of 10
Page 2
NEC Display Solutions of America, Inc.
LCD6520L-BK Installation Guide
65” LCD Display Rev 1.0
Ventilation Requirements (all models)
Dimensions below are minimum required for proper ventilation.
WALL
0 to 40 degC
50mm
2”
50mm
2”
32 to 104 degF
WALL WALL
2”
50mm
2”
50mm
2”
NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the
opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for
50mm
design review and recommendations.
www.necdisplay.com
LCD6520L-BK Page 2 of 10
Page 3
NEC Display Solutions of America, Inc.
LCD6520L-BK Installation Guide
65” LCD Display Rev 1.0
Display dimensions
(PANEL DISPLAY AREA)
(PANEL DISPLAY AREA)
LED
IR
www.necdisplay.com
LCD6520L-BK Page 3 of 10
Page 4
NEC Display Solutions of America, Inc.
LCD6520L-BK Installation Guide
65” LCD Display Rev 1.0
Display dimensions (cont.)
for MOUNT UNIT
6-M8 Depth 16
www.necdisplay.com
200mm MOUNTING HOLE PATTERN
REAR VIEW
LCD6520L-BK Page 4 of 10
Page 5
NEC Display Solutions of America, Inc.
LCD6520L-BK Installation Guide
65” LCD Display Rev 1.0
Dimensions with optional speakers and stand
www.necdisplay.com
LCD6520L-BK Page 5 of 10
Page 6
NEC Display Solutions of America, Inc.
LCD6520L-BK Installation Guide
65” LCD Display Rev 1.0
Table Top Stand Dimensions
Table Top Stand
°
0
.
°
1
7
.
+
0
-
°
0
9
www.necdisplay.com
LCD6520L-BK Page 6 of 10
Page 7
NEC Display Solutions of America, Inc.
LCD6520L-BK Installation Guide
65” LCD Display Rev 1.0
Optional Speaker Dimensions (SP-6520)
Optional Speakers
SP-6520
INPUT TERMINAL
www.necdisplay.com
LCD6520L-BK Page 7 of 10
Page 8
NEC Display Solutions of America, Inc.
LCD6520L-BK Installation Guide
65” LCD Display Rev 1.0
Dimensions with Peerless Fixed Wall Mount Kit (SF660)
Contact (708-865-8870 Ext.232)
www.necdisplay.com
LCD6520L-BK Page 8 of 10
Page 9
NEC Display Solutions of America, Inc.
LCD6520L-BK Installation Guide
65” LCD Display Rev 1.0
Dimensions with Peerless Tilt Wall Mount Kit (ST660)
NOTE: If so desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND).
www.necdisplay.com
LCD6520L-BK Page 10 of 10
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.