NEC LCD4615 User Manual

User’s Manual

MultiSync LCD3215
MultiSync LCD4215
MultiSync LCD4615

Index

Important Information ................................................................................................................................... English-1

Warning, Caution................................................................................................................................ English-1

Registration Information ...............................................................................................................................English-1

Safety Precautions, Maintenance & Recommended Use ............................................................................ English-3

Contents ....................................................................................................................................................... English-4

Installation ....................................................................................................................................................English-5

Parts Name and Functions .......................................................................................................................... English-7

Control Panel...................................................................................................................................... English-7

Terminal Panel.................................................................................................................................... English-8

Wireless Remote Control ................................................................................................................... English-9

Operating Range for the Remote Control........................................................................................... English-10

Handling the remote control ........................................................................................................... English-10

Setup.............................................................................................................................................................English-11

Connections ................................................................................................................................................. English-13

Wiring Diagram................................................................................................................................... English-13

Connecting a Personal Computer ...................................................................................................... English-14

Connect the LCD Monitor to a Personal Computer ........................................................................ English-14

Connecting with Digital Interface Equipment...................................................................................... English-15

Connect the LCD Monitor to a Computer with a Digital Output ...................................................... English-15

Connecting a DVD Player with component out .................................................................................. English-16

Connect the LCD Monitor to a DVD Player .................................................................................... English-16

Connecting to a Stereo Amplifier........................................................................................................ English-17

Connect the LCD Monitor to a Stereo Amplifier ............................................................................. English-17

Basic Operation ........................................................................................................................................... English-18

Power ON and OFF Modes ................................................................................................................ English-18

Power Indicator .................................................................................................................................. English-19

Using Power Management ................................................................................................................. English-19

Selecting a video source .................................................................................................................... English-19

Picture Size ........................................................................................................................................ English-19

Picture Mode ...................................................................................................................................... English-19

Information OSD................................................................................................................................. English-19

OSD (On-Screen-Display) Controls ............................................................................................................. English-20

PICTURE............................................................................................................................................ English-21

ADJUST ............................................................................................................................................. English-21

AUDIO ................................................................................................................................................ English-22

SCHEDULE ........................................................................................................................................ English-22

PIP...................................................................................................................................................... English-22

OSD.................................................................................................................................................... English-22

MULTI DISPLAY .................................................................................................................................English-23

DISPLAY PROTECTION .................................................................................................................... English-23

ADVANCED OPTION ......................................................................................................................... English-23

Controlling the LCD monitor via RS-232C Remote Control ......................................................................... English-26

Features ....................................................................................................................................................... English-27

Troubleshooting ........................................................................................................................................... English-28

Specifications - LCD3215 ............................................................................................................................ English-29

Specifications - LCD4215 ............................................................................................................................ English-30

Specifications - LCD4615 ............................................................................................................................ English-31

Pin Assignment ............................................................................................................................................English-32

Manufacturer’s Recycling and Energy Information ...................................................................................... English-33

www.necdisplaysolutions.com

Important Information

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS
THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM

WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE
POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit
has been included. Therefore, it should be read carefully in order to avoid any problems.

CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not
supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the
AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.

Plug Type North America

European

Continental

U.K. Chinese Japanese

English

Plug Shape

Region

Voltage

*When operating the MultiSync LCD3215/MultiSync LCD4215/MultiSync LCD4615 monitor with its AC 125-240V power supply,

use a power supply cord that matches the power supply voltage of the AC power outlet being used.

NOTE: This product can only be serviced in the country where it was purchased.

U.S.A./Canada

120* 230 220 100230

U.K. China JapanEU (except U.K.)

Registration Information

Declaration

Declaration of the Manufacturer

We hereby certify that the color monitor MultiSync
LCD3215 (L327HP)/MultiSync LCD4215 (L427HQ)/
MultiSync LCD4615 (L467HZ) are in compliance with

Council Directive 2006/95/EC:

– EN 60950-1

Council Directive 2004/108/EC:

– EN 55022
– EN 61000-3-2
– EN 61000-3-3
– EN 55024

and marked with

NEC Display Solutions, Ltd.

4-13-23, Shibaura,

Minato-Ku

Tokyo 108-0023, Japan

English-1

Canadian Department of Communications Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1.

FCC Information

1. Use the attached specified cables with the MultiSync LCD3215 (L327HP)/MultiSync LCD4215 (L427HQ)/MultiSync
LCD4615 (L467HZ) color monitor so as not to interfere with radio and television reception.

(1) Please use the supplied power cord or equivalent to ensure FCC compliance.
(2) Please use the supplied shielded video signal cable, Mini D-SUB 15 pin to Mini D-SUB 15 pin.

2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult your dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions.

The user may find the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify
and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office,
Washington, D.C., 20402, Stock No. 004-000-00345-4.

Declaration of Conformity

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

U.S. Responsible Party: NEC Display Solutions of America, Inc.
Address: 500 Park Boulevard, Suite 1100

Itasca, Illinois 60143

Tel. No.: [phone]

Type of Product: Computer Monitor
Equipment Classification: Class B Peripheral
Model: MultiSync LCD3215 (L327HP)

MultiSync LCD4215 (L427HQ)
MultiSync LCD4615 (L467HZ)

We hereby declare that the equipment specified above

conforms to the technical standards as specified in the FCC Rules.

Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation.
All other brands and product names are trademarks or registered trademarks of their respective owners.

English-2

Safety Precautions, Maintenance & Recommended Use

FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE

FOLLOWING WHEN SETTING UP AND USING

THE MULTI-FUNCTION MONITOR:

• DO NOT OPEN THE MONITOR. There are no user
serviceable parts inside and opening or removing covers
may expose you to dangerous shock hazards or other risks.
Refer all servicing to qualified service personnel.

• Do not spill any liquids into the cabinet or use your monitor
near water.

• Do not insert objects of any kind into the cabinet slots, as
they may touch dangerous voltage points, which can be
harmful or fatal or may cause electric shock, fire or
equipment failure.

• Do not place any heavy objects on the power cord.
Damage to the cord may cause shock or fire.

• Do not place this product on a sloping or unstable cart,
stand or table, as the monitor may fall, causing serious
damage to the monitor.

• The power supply cord you use must have been approved
by and comply with the safety standards of your country.
(Type H05VV-F 3G 1mm

• In UK, use a BS-approved power cord with molded plug
having a black (13A) fuse installed for use with this monitor.

• Do not place any objects onto the monitor and do not use
the monitor outdoors.

The lamps in this product contain mercury. Please

•

2

should be used in Europe)

dispose according to state, local or federal law.

• Do not bend, crimp or otherwise damage the power cord.

• If glass is broken, handle with care.

• Do not cover vent on monitor.

• Do not use monitor in high temperature, humid, dusty, or
oily areas.

• If monitor or glass is broken, do not come in contact with the
liquid crystal and handle with care.

• Allow adequate ventilation around the monitor, so that heat
can properly dissipate. Do not block ventilated openings or
place the monitor near a radiator or other heat sources.
Do not put anything on top of the monitor.

• The power cable connector is the primary means of
detaching the system from the power supply. The monitor
should be installed close to a power outlet, which is easily
accessible.

• Handle with care when transporting. Save packaging for
transporting.

• Do not touch LCD panel surface while transporting,
mounting and setting. Applying pressure on the LCD panel
can cause serious damage.

• Please clean the holes of back cabinet to reject dirt and
dust at least once a year because of set reliability.

• If using the cooling fan continuously, it’s recommended to
wipe holes a minimum of once a month.

Immediately unplug your monitor from the wall outlet and refer
servicing to qualified service personnel under the following
conditions:

• When the power supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the
monitor.

• If the monitor has been exposed to rain or water.

• If the monitor has been dropped or the cabinet damaged.

• If the monitor does not operate normally by following
operating instructions.

Recommended Use

• For optimum performance, allow 20 minutes for warm-up.

• Rest your eyes periodically by focusing on an object at least
5 feet away. Blink often.

• Position the monitor at a 90° angle to windows and other
light sources to minimize glare and reflections.

• Clean the LCD monitor surface with a lint-free, non-abrasive
cloth. Avoid using any cleaning solution or glass cleaner!

• Adjust the monitor’s brightness, contrast and sharpness
controls to enhance readability.

•Avoid displaying fixed patterns on the monitor for long
periods of time to avoid image persistence (after image
effects).

• Get regular eye checkups.

Ergonomics

To realize the maximum ergonomic benefits, we recommend
the following:

• Use the preset Size and Position controls with standard
signals.

• Use the preset Color Setting.

• Use non-interlaced signals.

• Do not use primary color blue on a dark background, as it is
difficult to see and may produce eye fatigue due to
insufficient contrast.

Cleaning the LCD Panel

• When the liquid crystal panel is stained with dust or dirt,
please wipe with soft cloth gently.

• Please do not rub the LCD panel with hard material.

• Please do not apply pressure to the LCD surface.

• Please do not use OA cleaner it will cause deterioration or
discolor on the LCD surface.

Cleaning the Cabinet

• Unplug the power supply

• Gently wipe the cabinet with a soft cloth

•To clean the cabinet, dampen the cloth with a neutral
detergent and water, wipe the cabinet and follow with a dry
cloth.

NOTE: The surface of the cabinet is composed of many types

of plastic. DO NOT clean with benzene thinner, alkaline
detergent, alcoholic system detergent, glass cleaner,
wax, polish cleaner, soap powder, or insecticide.
Rubber or vinyl should not be in contact with the cabinet
for an extended period of time. These types of fluids
and materials can cause the paint to deteriorate, crack
or peel.

English

English-3

Contents

Your new MultiSync monitor box* should contain the following:

• LCD monitor

• Power Cord*

•Video Signal Cable

• Setup Manual

•Wireless Remote Control and AAA Batteries

• Main switch cover

1

Video Signal Cable

(Mini D-SUB 15 pin to

Mini D-SUB 15 pin)

• Clamp x 2

• Screw for clamp (M4 x 8) x 2

• Screw for main switch cover (3 x 6) x 2

• CD-ROM

• Thumbscrew for stand x 2 (LCD4215 and LCD4615 only)

Power Cord*

Screw for clamp

(M4 x 8) x 2

1

Screw for main switch

cover (3 x 6) x 2

Thumbscrew for stand x 2

(LCD4215 and LCD4615 only)

Clamp x 2

Main switch cover

Setup Manual

CD-ROM

Setup Manual

*1Type and number of power cords included will depend on the where the LCD monitor is to be shipped. When more than

one power cord is included, please use a power cord that matches the AC voltage of the power outlet and has been
approved by and complies with the safety standard of your particular country.

* Remember to save your original box and packing material to transport or ship the monitor.

Wireless Remote Control

and AAA Batteries

English-4

Installation

This device cannot be used or installed without the Tabletop
Stand or other mounting accessory for support. For proper
installation it is strongly recommended to use a trained,
NEC authorized service person. Failure to follow NEC
standard mounting procedures could result in damage to the
equipment or injury to the user or installer. Product warranty
does not cover damage caused by improper installation.
Failure to follow these recommendations could result in
voiding the warranty.

Mounting

DO NOT mount the monitor yourself. Please ask dealer.
For proper installation it is strongly recommended to use a
trained, qualified technician. Please inspect the location
where the unit is to be mounted. Mounting on wall or ceiling
is the customer’s responsibility. Not all walls or ceilings are
capable of supporting the weight of the unit. Product
warranty does not cover damage caused by improper
installation, remodelling, or natural disasters. Failure to
comply with these recommendations could result in voiding
the warranty.

DO NOT block ventilated openings with mounting
accessories or other accessories.

For NEC Qualified Personnel:

To insure safe installation, use two or more brackets to
mount the unit. Mount the unit to at least two points on the
installation location.

Please note the following when mounting
on wall or ceiling

• When using mounting accessories other than those that
are NEC approved, they must comply with the VESA­compatible (FDMlv1) mounting method.

• NEC strongly recommends
using size M6 screws
(9 mm + thickness of
bracket in length). If using
screws longer than 9 mm,
check the depth of the hole.
(Recommended Fasten
Force: 310 - 410 N•cm)
NEC recommends mounting
interfaces that comply with
UL1678 standard in North
America.

• Prior to mounting, inspect the installation location to
insure that it is strong enough to support the weight of
the unit so that the unit will be safe from harm.

• Refer to the instructions included with the mounting
equipment for detailed information.

Weight of LCD assembly:

- MultiSync LCD3215: 13.1 Kg (MAX)

- MultiSync LCD4215: 21.6 Kg (MAX)

- MultiSync LCD4615: 23.9 Kg (MAX)

Unit

9 mm

Screw length should equal
depth of hole (9 mm) + the
thickness of mounting bracket.

Mounting
Bracket

Screw

Thickness
of Bracket

Orientation

• When using the display in the portrait position, the
monitor should be rotated clockwise so that the left side
is moved to the top and the LED indicator light is on the
bottom. This will allow for proper ventilation and will
extend the lifetime of the monitor. Improper ventilation
may shorten the lifetime of the monitor.

Mounting location

• The ceiling and wall must be strong enough to support
the monitor and mounting accessories.

• DO NOT install in locations where a door or gate can hit
the unit.

• DO NOT install in areas where the unit will be subjected
to strong vibrations and dust.

• DO NOT install near where the main power supply
enters the building.

• Do not install in where people can easily grab and hang
onto the unit or the mounting apparatus.

• When mounting in a recessed area, as in a wall, leave at
least 4 inches (10cm) of space between the monitor and
the wall for proper ventilation.

• Allow adequate ventilation or provide air conditioning
around the monitor, so that heat can properly dissipate
away from the unit and mounting apparatus.

Mounting on ceiling

• Ensure that the ceiling is sturdy enough to support the
weight of the unit and the mounting apparatus over time,
against earthquakes, unexpected vibrations, and other
external forces.

• Be sure the unit is mounted to a solid structure within the
ceiling, such as a support beam. Secure the monitor
using bolts, spring lock washers, washer and nut.

• DO NOT mount to areas that have no supporting internal
structure. DO NOT use wood screws or anchor screws
for mounting. DO NOT mount the unit to trim or to
hanging fixtures.

Maintenance

• Periodically check for loose screws, gaps, distortions, or
other problems that may occur with the mounting
apparatus. If a problem is detected, please refer to
qualified personnel for service.

• Regularly check the mounting location for signs of
damage or weakness that may occur over time.

English

English-5

Attaching Mounting Accessories

The display is designed for use with the VESA mounting
system.

1. Attach Mounting Accessories

Be careful to avoid tipping monitor when attaching
accessories.

VESA Mounting Interface

200 mm

200 mm
400 mm

Mounting accessories can be attached with the monitor in
the face down position. To avoid damaging the screen face,
place the protective sheet on the table underneath the LCD.
The protective sheet was wrapped around the LCD in the
original packaging. Make sure there is nothing on the table
that can damage the monitor.

When using mounting accessories other than NEC
compliant and approved, they must comply with the VESA­compatible mounting method.

3. Ventilation Requirements

When mounting in an enclosed space or recessed area,
leave adequate room between the monitor and the
enclosure to allow heat to disperse, as shown below.

4. Prevent Tipping

When using the display with the Tabletop Stand fasten the
LCD to a wall using a cord or chain that can support the
weight of the monitor in order to prevent the monitor from
falling. Fasten the cord or chain to the monitor using the
provided clamp and screw.

LCD3215: 360 mm
LCD4215: 475 mm
LCD4615: 490 mm

Screw Holes

2. Installing and removing optional table
top stand

CAUTION: Installing and removing the stand must be done

by two or more people.

To install, follow those instructions included with the stand or
mounting apparatus. Use only those devices recommended
by the manufacturer.

Handle with care when mounting LCD monitor stand and
avoid pinching your fingers.

Optional table top stand

Table

Protective Sheet

Clamp

Cord or chain

Screw

Before attaching the LCD monitor to the wall, make sure
that the wall can support the weight of the monitor.

Be sure to remove the cord or chain from the wall before
moving the LCD.

NOTE: ST-3215 is for LCD3215. Use the Thumbscrews

included with ST-3215.
ST-4020 is for LCD4215 and LCD4615. Use the
Thumbscrew included with LCD4215 or LCD4615.
(LCD4215 and LCD4615 are not mentioned in
ST-4020 manual).

English-6

Parts Name and Functions

Control Panel

POWER button ( )

Switches the power on/off. See also page 18.

MUTE button

Switches the audio mute ON/OFF.

INPUT button

Acts as SET button within OSD menu. Toggle switches
between [RGB1], [RGB2], [RGB3], [DVD/HD], [VIDEO(S)],
[VIDEO].

PLUS (+) button

Acts as (+) button to increase the adjustment with OSD menu.
Increases the audio output level when the OSD menu is
turned off.

MINUS (-) button

Acts as (-) button to decrease the adjustment with OSD menu.
Decreases the audio output level when the OSD menu is
turned off.

UP ( ) button

Acts as button to move the highlighted area up to select
adjustment items within OSD menu.

English

OFF ON

DOWN ( ) button

Acts as button to move the highlighted area down to
select adjustment items within OSD menu.

EXIT button

Activates the OSD menu when the OSD menu is turned-off.
Acts as EXIT button within the OSD to move to previous
menu.

Remote control sensor and Power Indicator

Receives the signal from the remote control (when using the
wireless remote control). See also page 9.
Glows green when the LCD monitor is in active mode.
Glows red when the LCD is in POWER OFF mode.
When the LCD monitor is in POWER SAVE mode, it will
glow both green and red. When SCHEDULE is enabled, it
will blink green and glow red. See page 19. When a
component failure is detected within the monitor, the
indicator will blink red.

Main Power Switch

On/Off switch to turn main power ON/OFF. See also page 18.

Control Key Lock Mode

This control completely locks out access to all Control Key
functions. To activate the control key lock function, press both

and and hold down simultaneously for more than
3 seconds. To resume user mode, press both and and
hold simultaneously for more than 3 seconds.

English-7

Terminal Panel

AC IN connector

Connects with the supplied power cord.

RGB1 IN (DVI-D)

To input digital RGB signals from a computer or HDTV
device having a digital RGB output.

* This connector does not support analog input.

RGB2 IN (mini D-Sub 15 pin)

To input analog RGB signals from a personal computer or
from other RGB equipment.

RGB3 IN [R, G, B, H, V] (BNC)

To input analog RGB signals or signals from other RGB
equipment.
This is also to connect equipment such as a DVD player,
HDTV device and Set-Top-Box.

RGB OUT (mini D-Sub 15 pin)

To output the signal from the RGB2 and RGB3 IN connector
to an input on a separate device.

DVD/HD IN [Y, Cb/Pb, Cr/Pr] (BNC)

Connecting equipment such as a DVD player, HDTV device,
or Set-Top-Box.

AUDIO IN 1, 2, 3

To input audio signal from external equipment such as a
computer, VCR or DVD player.

AUDIO OUT

To output the audio signal from the AUDIO IN 1, 2 and 3
jack to an external device (stereo receiver, amplifier, etc.).

VIDEO INPUT/OUTPUT Connector

VIDEO IN connector (BNC and RCA): To input a

composite video signal. BNC and RCA connectors are not
available at the same time (Use only one input).
VIDEO OUT connector (BNC): To output the composite
video signal from the VIDEO IN connector.
VIDEO(S) IN connector (Mini DIN 4 pin): To input the
VIDEO(S) (Y/C separate signal).

EXTERNAL CONTROL (D-Sub 9 pin)

Connect RS-232C input from external equipment such as a
PC in order to control RS-232C functions.

EXTERNAL SPEAKER TERMINAL

To output the audio signal from AUDIO 1, 2, 3.
Note: This speaker terminal is for optional speaker.
SP-3215 for MultiSync LCD3215, SP4020-4620 for
MultiSync LCD4215, SP-4615 for MultiSync LCD4615.
When you use SP4020-4620 for LCD4215, please use
SP4020-4620 with large extension blocks (included in
speaker), as if being mounted on LCD4620. (LCD4215 is
not mentioned in SP4020-4620 manual).

Kensington Lock (LCD4215 and LCD4615 only)

For security and theft prevention.

English-8

Wireless Remote Control

PIP (Picture In Picture) button

ON/OFF button: Toggle switches between PIP and POP

(Picture Out Picture). See page 22.

INPUT button: Selects the “picture in picture” input signal.
CHANGE button: Replaces to the main picture and sub

picture.
NOTE: The “PIP” and “POP” modes do not function when
the screen size is “CUSTOM” or “REAL”.

RGB1 - - - ­RGB2 - - - ­RGB3 - - - -

DVD/HD - - - -

VIDEO(S) --

Main picture

VIDEO

RGB1 RGB2 RGB3 DVD/HD VIDEO(S) VIDEO

PIP POP OFF

Sub picture

--

STILL button

ON/OFF button: Activates/deactivates still picture mode.
STILL CAPTURE button: Captures still picture.

English

POWER button

Switches the power on/off.

INPUT button

Selects input signal, [RGB1], [RGB2], [RGB3], [DVD/HD],
[VIDEO(S)], [VIDEO].

AUDIO INPUT button

Selects audio input source [AUDIO:1], [AUDIO:2], [AUDIO:3].

SIZE button

Selects picture size, [FULL], [NORMAL], [CUSTOM],
[DYNAMIC] and [REAL]. See page 19.

PICTURE MODE button

Selects picture mode, [HIGHBRIGHT], [STANDARD],
[sRGB], [CINEMA]. See page 19.

HIGHBRIGHT: for moving images such as DVD
STANDARD: for images
sRGB: for text based images
CINEMA: for movies.

DISPLAY button

Turns on/off the information OSD. See page 19.

AUTO SETUP button

Enters auto setup menu. See page 21.

MENU button

Turns on/off the menu mode.

UP/DOWN button

Acts as

button to move the highlighted area up or down
to select adjustment items within OSD menu.
Small screen which adjusted “PIP” mode moves up or down.

MINUS/PLUS (+/-) button

Increases or decreases the adjustment level within OSD
menu settings.
Small screen which adjusted “PIP” mode moves left or right.

SET button

Makes selection.

EXIT button

Returns to previous menu within OSD menu.

MUTE button

Turns on/off mute function.

VOLUME UP/DOWN button

Increases or decreases audio output level.

English-9