NEC HS3-40, HS3 Specifications
NEC Storage HS3
NEC Storage Series
July 2013
Product
Number of Nodes*
Capacity*2*
Effective Capacity
Maximum Performance*
Network
Interface Optional
Number of
Optional
Network Interface Ports
Disk Drive Specications
Capacity*
Supported Protocols
Supported Backup Software*
Supported Archive Software*
Ambient Operating Temperature
Conditions Humidity*
Input Voltage
Weight
Dimensions (WxDxH)*
Power Consumption
*1: Number of nodes cannot be expanded.
*2: Capacity for 3 parities. The effective capacity is calculated assuming a compression ratio of 20:1. (The compression ratio varies with the type of data.
*3: Calculated where 1 GB = 1,000,000,000 bytes, 1 TB = 1,000 GB, and 1 PB = 1,000 TB.
*4: Performance achieved when OpenStorage Express I/O software is used with a typical full backup pattern (95% of existing data is duplicated).
*5: Can also be used with 100BASE-TX and 10BASE-T.
*6: Supported software will gradually be increased. Contact us for details on supported software.
*7: No condensation both when operating and when on standby.
*8: Not including the front bezel, slide rails, and protrusions.
Optional Software
Replication Software product for replicating (copying) stored data to a remote site via a network
Data Protection Software product for preventing a le from being changed or deleted for a given period of time
Encryption Software product for preventing data leakage in case of theft or disposal of the HDD and/or node.
OpenStorage Software product for optimizing Symantec NetBackup
- Copies backup data from a main site to a remote site at a high speed, consolidating the management of both sites.
- Offers original protocol for performing high-speed backup and restore.
- Makes new full backup data from the existing full backup and incremental/differential backup, and saves in the storage unit.
1
Raw Capacity
3
4
Standard
Standard
Optional (10GbE NIC x 2
Disk Interface
6
6
8
(
10GbE NIC x 1
3
/Rotations/Units
7
)
)
Data Protector, NetVault Backup, Tivoli Storage Manager, CommVault, Oracle Recovery Manager
Enterprise Vault, StorageForce, InformationAssessmentSystem
NEC Storage HS3 Single-Node Model
1000BASE-T*
10GBASE-SR (Optical: LC connector
10GBASE-SR x 2 + 1000BASE-T*
10GBASE-SR x 4 + 1000BASE-T*
NFS, CIFS, Symantec OpenStorage
NetBackup, BackupExec, ARCserve Backup, NetWorker,
10 to 40ºC (while operating), -10 to 55ºC (on standby
20 to 80% RH (while operating), 20 to 80% RH (on standby
448 mm x 696 mm x 87.4 mm
1
8 TB (up to 24 TB
104 TB (up to 312 TB
3.60 TB/h
5
(Copper: RJ-45 connector
32 kg
638 W
5
x 6
)
1000BASE-T*
3.5-inch SATA (6 Gbps
2 TB/7,200 rpm/12
AC 100-240V 50/60Hz
)
)
)
)
)
5
x 4
5
x 2
Backup/Archival Storage
NEC Storage HS3
)
)
Making Backup/Archiving
Simple & Smart
Environmental Compliance
Eco Symbol
RoHS Compliance This product complies with the European Union’s directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment
NetBackup, BackupExec and Enterprise Vault are trademarks or registered trademarks of Symantec Corporation in the United States and other countries.
EMC and NetWorker are trademarks and registered trademarks of EMC Corporation.
HP and Data Protector are registered trademarks of Hewlett-Packard Company.
ARCserve is a trademark or registered trademark of CA, Inc. and its afliates.
Ethernet is a registered trademark of Xerox Corporation.
NetValut is a registered trademark of Quest Software,Inc.
Tivoli is a registered trademark of International Business Machines Corporation in the United States and other countries.
CommValut and Simpana are trademarks or registered trademarks of CommVault, Inc.
Oracle is a registered trademark of Oracle Corporation and/or its afliates.
All other products, brands, and trade names used in this document are trademarks or registered trademarks of their respective holders.
The Eco Symbol is a label placed on products that meet NEC’s prescribed environmental soundness standards.
Eco Symbol products must be environmentally superior and assure transparency.
Safety Notice
Before using this product, please read carefully and comply with the cautions and warnings in manuals such as the Installation Guide and
Safety Precautions. Incorrect use may cause a re, electrical shock, or injury.
For further information, please contact:
(
RoHS).
Specications and designs in this catalog are subject to change for improvement without notice.
NEC Corporation
As of July 2013
Cat.No.E04-13080001E
http://www.nec.com/en/global/prod/storage/
NEC Storage HS3
Economical, efficient, and reliable. NEC Storage HS3 will revolutionize all your backup and archival work.
Making Backup/Archiving
Simple & Smart
Not enough space
to store tapes?
Too much time required
for backup and
restoration?
Enjoy compact backup and
storage of data on disk.
Changing tapes too
time-consuming?
Reduce backup and restoration
times with increased speed.
Multiple generations of
media difcult to manage?
Liberate yourself from manual
tasks with automated operation.
Delivering tapes as
part of anti-disaster
measures too costly?
Centrally manage different
generations of data.
Reduce costs by transferring
data using a low-speed line.
WAN
Drastic Reduction of Backup Costs Easy Installation for Beginners
NEC Storage HS3 can reduce the amount of stored data up to 1/20th* by
automatically detecting and eliminating duplicate data and compressing it.
By exponentially enhancing the capacity efficiency, NEC Storage HS3
achieves a unit cost that is less expensive than tape. In addition, NEC
Storage HS3 suppresses backup costs by reducing both the workload of
changing tapes, and the storage space needed for tape backup.
Varies with the data characteristics.
*
Duplicated data is consolidated into
one block, and only non-duplicated
data is compressed and stored
Deduplication and Compression
Even inexperienced users can smoothly install NEC Storage HS3
simply by entering the necessary information following the screen
navigation.
Reduced File Server Backup Time
Increased data volumes mean longer backup times. NEC Storage
HS3 eliminates the need for regular full backups. By performing only
Low-Cost Remote Backup
Businesses need to store backup data in remote storage devices as part of
anti-disaster measures to be implemented in case of earthquake, fire or flooding,
but traditional remote disk backup is very expensive. NEC Storage HS3 delivers
a secure remote backup system at low cost. Mass data can be deduplicated
and compressed, then transferred using a low-cost, low-speed line. You can
reduce monthly line costs while minimizing data loss in case of disaster.
daily incremental backups, a full backup is automatically synthesized
at high speed within the NEC Storage HS3. This reduces the load of
the business servers and networks, as well as significantly reducing
the backup time.
Conventional Backup
(Regular full backup is required.)
High-Speed Synthetic Backup
(
Incremental backup is performed
for 2nd and subsequent ba ckups.
)
NEC Storage HS3’s deduplication function can solve these problems!
Backed up and archived business data continues to pile up. Businesses need to improve their current backup environment to use this data
effectively. NEC Storage HS3 is an effective tool that can free you from complicated tape backup work and efficiently store large volumes of
data through the use of our original deduplication feature. NEC Storage HS3 reduces backup costs and space for media storage, as well as
staff workloads, by automating operations. NEC Storage HS3 will revolutionize your backup processes.
LAN
Business
Server
Business
Data
Tape
Library
Backup Server
Backup
Backup
Data
Data
Enjoy easy backup simply by switching from tapes to NEC Storage HS3.
Performance and reliability are improved by migrating
from tape backup to disk backup!
Business
Server
Business
Data
Backup Server
NEC Storage HS3 NEC Storage HS3
LAN
Replication
WAN
The amount of data to be transferred is reduced.
Low-cost, low-speed line sufcient for the task.
WAN
NEC Storage HS3
NEC Storage HS3
*WAN: Wide Are a Network
NEC Storage HS3 provides robust fault tolerance to prevent data loss even if
Easily Expandable up to 24 TB
NEC Storage HS3 is a self-contained backup storage device consisting of a
single node. You can freely expand the capacity as needed.
1 node
Raw capa city: 24 TB
Effec tive cap acity : 312 TB
three disk drives go down at the same time. NEC Storage HS3 has an automatic
repair function that can restore the redundancy via rebuild processing in as little
as one hour, resulting in a level of reliability that surpasses that of RAID6.
NEC Storage HS3 is equipped with various advanced security
functions, including functions to encrypt not only stored data but also
1 node
Raw capa city: 16 TB
Effec tive cap acity : 208 TB
data to be transferred, protect data from malicious falsification and
erroneous operation, and completely wipe unnecessary physical data
areas to make it impossible to restore data.
Holidays: Regular full backup
Weekdays: Incremental backup
1st time: Full backup
2nd and subsequent times
(
holidays and weekdays): Incremental backups
Can Reliably Withstand 3 Simultaneous Drive Failures
Protection of Sensitive Data
NEC Storage HS3
1 node
Raw capa city: 8 T B
Effec tive cap acity : 104 TB
*The effective capacity is calculated
assum ing a comp ression rati o of 20:1.
Loading...