Product Description, Lens Specs, Notes and Formulas Page 1
Projection Distances and Screen Sizes
Ceiling Mount Installation
Desktop Setup
Lens Shift Adjustable Range
GT20ZL Lens
GT13ZL/GT19ZL/GT24ZL/GT34ZL Lenses
GT10RLB & GT20ZL Screen Size Information Page 6
Cabinet Dimensions
Top, Front and Right Side
Bottom, Back and Left Side Page 8
Ceiling Mount Dimensions
Control Codes
Product Description
Type: 3 panel LCD, 1.3” p-Si TFT w/MLA Dimensions: 16.5”(W) x 8.25”(H) x 19.45”(D)
Native Resolution: GT1150: 1024 x 768 Weight: GT1150: 22.1 lbs w/o lens
GT2150: 1366 x 1024 GT2150: 28.3 lbs w/o lens
Brightness: GT1150: 3000 ANSI Lumens Power Lens Shift/Power Zoom/Power Focus
GT2150: 2500 ANSI Lumens
GT20ZL: C(Wide) = 2.1731W – 3.987 --- C(Tele) = 2.8477W – 3.949 W = Screen Diagonal x 4/5
GT24ZL/24ZLB: C(Wide) = 2.4282W – 4.799 --- C(Tele) = 3.5209W – 4.799 H = Screen Diagonal x 3/5
GT34ZL/34ZLB: C(Wide) = 3.5523W – 6.786 --- C(Tele) = 5.3284W – 6.786 Screen Diagonal = W x 5/4
www.necvisualsystems.com GT1150/2150 Page 1 of 10
W = Screen Width (4:3)
Page 2
Page 3
Page 4
Page 5
Page 7
Page 9
Page 10
Ceiling Mounted Installation
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
The following diagram shows the relationship bet ween projector position and the screen. Refer to the chart below for data.
Distances are in inches. For millimeters multiply by 25.4.
Throw Distance
6.3"
9.5"C
Shift +
Screen Ctr
Factory Preset
Lens Centered
with Mount
Shift -
GT
Note: See Page 4 and 5 for lens shift range for each lens.
Note: Lens shift is not available on GT10RL/GT10RLB (rear lenses). GT10RL/GT10RLB should be used only for “zero degree/no-
Note: For screen sizes not indicated on the chart, use the formulas on page 1.
Note: “NA” means it is outside the screen range for that lens. Refer to “Screen Sizes” in the Lens Specifications on Page 1.
*GT10RLB and GT20ZL may need a metal plate removed at the back of the lens to achieve full screen size range (see page 6).
www.necvisualsystems.com GT1150/2150 Page 2 of 10
Throw Distance
GT19ZL/19ZLB
(check availability)
inchesinches
NANANA
Zoom Lenses
GT20ZL*
2.1 - 2.8:1
inches
NA
GT24ZL/24ZLBGT34ZL/34ZLB
2.4 - 3.4:1
inchesinches
NA
1121.91130.0-1698.3
NA
3.4 - 5.2:1
NA
NA
NA
NA
2124.6
Desktop Setup
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
The following diagram shows the relationship bet ween projector position and the screen. Refer to the chart below for data.
Distances are in inches. For millimeters multiply by 25.4.
Screen Ctr
Throw Distance
Shift +
Factory Preset
Shift -
4.65"
Note: See Page 4 and 5 for lens shift range for each lens.
Note: Lens shift is not available on GT10RL/GT10RLB (rear lenses). GT10RL/GT10RLB should be used only for “zero degree/no-
Note: For screen sizes not indicated on the chart, use the formulas on page 1.
Note: “NA” means it is outside the screen range for that lens. Refer to “Screen Sizes” in the Lens Specifications on Page 1.
*GT10RLB and GT20ZL may need a metal plate removed at the back of the lens to achieve full screen size range (see page 6).
Throw Distance
GT19ZL/19ZLB
(check availability)
inchesinches
NANANA
Zoom Lenses
GT20ZL*
2.1 - 2.8:1
inches
NA
GT24ZL/24ZLBGT34ZL/34ZLB
2.4 - 3.4:1
inchesinches
NA
1121.91130.0-1698.3
NA
3.4 - 5.2:1
NA
NA
NA
NA
2124.6
www.necvisualsystems.com GT1150/2150 Page 3 of 10
Loading...
+ 7 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.