NEC Express5800-R120f-2M, Express5800-R120f-1M Appendix

Ter m

Description

RAID Controller

The RAID Controller can use hard disk drives as Disk Arrays.

s can be other than hard disk drives if the RAID

Disk Array

The virtual hard disk space is created by some Physical Devices. So, you cannot see

e Drive

Hard disk drives of the type are prepared previously to be replaced with a Physical
Global Hot Spare

Available as a Hot Spare of any Disk Array in a single RAID Controller.

The battery is intended to hold the information on the cache memory in a RAID

Transfers the cache of the RAID Controller to the flash memory to keep the information

Appendix A : Glossary

The terms used on the Universal RAID Utility are listed in the tables below.

Basic Terms on RAID System

RAID System The RAID System has the ability of using hard disk drives in a computer as Disk Arrays.

The RAID System handles a single RAID Controller as a single system.

Physical Device Physical Devices are used by a RAID System. Physical Devices mean hard disk drives or

SSD (Solid State Drive). Physical Device
Controller can connect with devices other than hard disk drives.

Universal RAID Utility displays "PD" as Physical Device too.

Disk Array on operating system. You can create Logical Drive on Disk Array.

SSD Cache Disk Array The Disk Array that is configured with SSD Cache Drive.

Logical Drive The virtual hard disk drive is created on a Disk Array to be recognized by operating

system. A specific RAID Level should be set for each Logical Drive.
Universal RAID Utility displays "LD" as Logical Drive too.

SSD Cache Drive The virtual cache drive is created on an SSD Cache Disk Array. The SSD Cach

operates as the Cache of Logical Drive.

Hot Spare

Device in which a failure occurs.

Dedicated Hot Spare Available as a Hot Spare of a specific Disk Array in a single RAID Controller.

Battery

Controller if the power supplied to the RAID Controller is interrupted.

Flash Backup Unit

safe when the power to the RAID Controller is cut off.

Cache Memory The cache is intended to improve the I/O performance of a RAID Controller.

Enclosure Means a module equipped with slots to which Physical Devices are inserted.

Fan Unit Means a cooling fan unit installed in an enclosure.

Power Supply Unit Means a power unit supplying power to an enclosure.

1

Ter m

Description

Generic term of maintenance functions requiring certain periods for executions such as
Configuration

Means the configuration of a RAID System.

Writes the data in a failed hard disk drive into a new hard disk drive replaced to Rebuild

ve to verify the data or

Reads all sectors on hard disk drives in a RAID System to check whether errors occur or
Make Offline

Means that a Physical Device is entered into the Failed status manually.

occurrence

down Physical Devices that are

Refresh Battery

Indicates the function of restoring the degraded battery due to charging and

Ter m

Description

To use this mode, expert knowledge on RAID is required. You can mainly use the
functions required for maintenance jobs, functions of setting data about a RAID System

Allows an optimum RAID System to be configured only by deciding the number of

Drives for each RAID

Alert

Means the operation of sending events such as failures occurred in a RAID System to

of acquiring all the information on managed RAID Systems to

Basic Terms on Functions of RAID System

Operation

Rebuild and Consistency Check

Start Initialize Initializes management area and data area of the Logical Drive.

Start Rebuild

the Logical Drive.

Start Consistency Check Reads all sectors on hard disk drives configuring a Logical Dri

provide parity check.

Patrol Read

not.

Cache Mode Indicates the mode in which data is written into the cache memory in a RAID Controller.

Make Online Means that a Physical Device is entered into the Online status manually.

Buzzer Indicates a Buzzer installed in a RAID Controller. The Buzzer notifies you of

of a failure with sound.

HDD Power Saving Reduces power consumption of the System by spinning

not in use.

discharging.

Basic Terms on Universal RAID Utility

Standard Mode Default running mode of Universal RAID Utility.

In the mode, you can use the standard functions for managing the RAID System.

Advanced Mode Maintenance/high-performance mode of Universal RAID Utility.

closely to configure the system and functions of changing parameters.

Easy Configuration The function is provided by the Universal RAID Utility to configure a RAID System easily.

Physical Devices used by a Logical Drive and the number of Logical
Controller.

RAID Log Means the log for the Universal RAID Utility.

OS Log Means the log provided by OS.

OS Log is the event log (system) in Windows or the syslog in Linux.

external systems.

rescan Means the operation

update the information managed by the Universal RAID Utility to the latest.

2