NEC Express5800-140Rc-4 Release Notes

System Release Notes

Express5800/140Rc-4

System Release Notes

PN: 455-0168 3-002

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, i s
the valuable property of NEC Solutions (America), Inc. and/or its licensors. NEC Solutions
(America), Inc. and/or its licensors, as appropriate, reserve all patent, copyright and other
proprietary rights to this document, including all design, manufactur ing, reproduction, use,
and sales rights thereto, except to the extent said rights are expressly granted to others.

The NEC Solutions (America), Inc. product(s) discussed in this document are warranted in
accordance with the terms of the Warranty Statement accompanying each product.
However, actual performance of each product is dependent upon factors such as system
configuration, customer data, and operator control. Since implementation by cust omers of
each product may vary, the suitability of specific product configurations and applications
must be determined by the customer and is not warranted by NEC Solutions (America), Inc.

To allow for design and specification improvements, the information in this document is
subject to change at any time, without notice. Reproduction of this document or portions
thereof without prior written approval of NEC Solutions (America), Inc. is prohibited.

Trademarks

Windows 2003 and Windows NT are registered trademarks of Microsoft Corporation.
Red Hat Linux is a registered trademark of Red Hat, Inc.
SCO OpenServer is a trademark of Caldera Systems, Inc.

All other product, brand, or trade names used in this publication are the trademarks or registered trademarks

of their respective trademark owners.

November 2004

Copyright 2004

NEC Solutions (America), Inc

10850 Gold Center Drive, Suite 200,

Rancho Cordova, CA 95670

All Rights Reserved

Express5800/140Rc-4

System Release Notes

The Express5800/140Rc-4 System Release Notes provide up-to-date information
on your system. These notes also provide additional valuable information about
your system that was not included in the user’s guide.

Please read these notes in their entirety.

CONTENTS

Introduction ............................................................................................................................................3

General Comments.......................................................................................................... .......................3

Advisories...............................................................................................................................................3

EXPRESSBUILDER .........................................................................................................................3

nec

Introduction

These System Release Notes cover the following topics:

 Ge neral Comments
 Advisories

General Comments

The following general comments apply to this server.

 Versions of the Network Operating Systems tested and recommended are:

⎯ Microsoft Windows

 Microsoft Windows
 SCO OpenServer

Advisories

EXPRESSBUILDER

The following advisories apply to EXPRESSBUILDER.

 Windows 2003 must be installed using EXPRESSBUILDER Express Setup

to take full advantage of NEC specific software for your server.

Note: This advisory does not apply if your operating

system was preloaded at the factory.

 If you already have an operating system installed when creating a

maintenance partition, EXPRESSBUILDER will warn you of the existing
partition. If you want to preserve the installed operating system, do not
create the maintenance partition or the existing operating system will be
overlaid by the maintenance partition.

®

2003

®

2000 and NT© 4.0 is not supported.

™

5.06 is not supported.

 The Administrator Menu in the System Information Management segment

of the Offline Maintenance Utility is accessible only by NEC authorized
service representatives.

 EXPRESSBUILDER operates in floppy emulation mode. The emulated

floppy drive portion of your system CD-ROM is designated Drive A and the
remaining portion(s) of the CD-ROM is designated Drive Q. Your system
diskette drive is Drive B. After creating the Off-line Maintenance Utility
diskette, EXPRESSBUILDER prompts you to remove the diskette from
Drive B. At this prompt, remove the diskette from your diskette drive.

Express5800/140Rc-4 System Release Notes 3