NEC Express5800-120Ri-2 Basic manual

NEC

120Ri-2

Express5800

/

■Delivers utmost performance for
medium to large businesses, along with
high expandability, reliability, and
availability in a space-saving 2U rack
form factor

■Supports Multi-Core Intel ®Xeon®
processors for powerful processing

■EXPRESSSCOPE Engine provides
enhanced RAS functionality while
optimizing your management cost

Product Highlights

The NEC Express5800/120Ri-2 supports up to two Quad­Core Intel® Xeon® 5300 series processors or up to two
Dual-Core Intel® Xeon® 5100 series processors. Powered by

the multi-core Intel® Xeon® processors that enable data­intensive processing, the 120Ri-2 delivers improved application
performance while achieving energy-efficient operation within
the same physical space.

Delivering up to 48GB (4GB x12) of memory capacity, the
120Ri-2 employs DDR2-667 Fully-Buffered DIMM memory
with ECC, ChipkillTM, mirroring, and on-line sparing
capabilities.

To provide high-performance internal storage, the 120Ri-2
supports Serial Attached SCSI (SAS), with a maximum
capacity of 1.8TB (300GB x6), and enables RAID 0 and 1 as
standard and RAID 5 as option.

In addition to the Low Profile PCI slots (one PCI EXPRESSTM x8
slot and two x4 slots), the 120Ri-2 supports a wide variety of
option boards to further customize the slot mix and to meet
particular needs. By replacing the standard riser card (one PCI
EXPRESSTM x8 slot and two 64bit/100MHz PCI-X slots, Full
Height) with an optional riser card*, one of the following slot
options becomes available:

- Two 64bit/133MHz PCI-X slots and one 64bit/100MHz PCI-X
slot

- Three 64bit/33MHz PCI (5V) slots

* Two different optional riser cards are available for 120Ri-2.
To ensure continuous system operation, hot-swap redundant

power supplies and fans are supported as option.
To enhance RAS (Reliability, Availability and Serviceability)

functionality, the 120Ri-2 comes standard with the
EXPRESSSCOPE Engine. This feature allows the user to
monitor the status of a managed server and operate its KVM
(Keyboard, Video, and Mouse) devices from a remote console
via LAN.

Bundled for easy system management, NEC ESMPRO
monitors and controls system operation from the remote
console, and assists the administrator in troubleshooting the
system. For simple system installation, NEC EXPRESSBUILDER
is attached as an installation support tool.

www.necam.com/servers

NEC

120Ri-2

Express5800

Hardware Specification

/

Quad-Core Intel
X5355

(2.66GHz/1333MHz FSB/2x4MB L2 Cache)

E5345

(2.33GHz/1333MHz FSB/2x4MB L2 Cache)

®

Xeon® Processor

Dual-Core Intel® Xeon® Processor
5160

CPU

No. of CPU

Intel® 64

Chipset

(3GHz/1333MHz FSB/4MB L2 Cache)

5140

(2.33GHz/1333MHz FSB/4MB L2 Cache)

5130

(2GHz/1333MHz FSB/4MB L2 Cache)

5110

(1.60GHz/1066MHz FSB/4MB L2 Cache)

1-2
Supported

®

Intel

5000P

DDR2-667 FB-DIMM

ECC, Chipkill, mirroring, on-line sparing

Memory

Internal

HDD

*1

Requires an optional Disk Array Controller (SAS) [N8103-91, -99, or -105].

*2

Requires an optional Riser Card (PCI-X) [N8116-07].

*3

Requires an optional Riser Card (5V) [N8116-08].

*4

Use a Y-cable provided with the system.

*5

The front bezel and protruding objects are not included.
When included: 485W x 822D x 88H

*6

Supports up to 4GB memory.

*7

SP1 or later.

*8

Contact your local NEC sales company for RAID configurations on Linux.

*9

Go to "NEC Express5800 on Linux" at:

http://www.nec.co.jp/express/linux/index.html

*10

Writing software is not provided for this combo drive.

Standard
Max

Max
I/F

RAID

Hot-Plug

ODD

Network

2GB (1GB x2)
48GB (4GB x12)

(when standard DIMMs are removed.)

1.8TB (300GB x6)
Serial Attached SCSI

*8

On-board RAID 0, 1
RAID 5 (option)

*1

Supported
CD-RW/DVD combo drive

*10

1000BASE-T x2

(100BASE-TX and 10BASE-T are supported.)

Device Bays [Free]

Disk Drive Bays [Free]

Expansion Slots

Graphics

Maximum

Power Consumption

Power Supply

Cooling Fan

External Interface

Dimensions (mm)

Weight

Support OS

*6

1[1]
6[6]
Total: 6 slots

Full Height:
Standard : PCI EXPRESS

64bit/100MHz PCI-X: 2

Option 1
Option 2

*2

: 64bit/133MHz PCI-X: 2

64bit/100MHz PCI-X: 1

*3

: 64bit/33MHz PCI (5V): 3
Low Profile
Standard : PCI EXPRESS

PCI EXPRESS

TM

x8 : 1

TM

x8: 1

TM

x4: 2

Server Management Controller
integrated (2MB)

Option: ATI ES1000 (16MB)
900VA/890W
Standard: 1, Not redundant

Option : Up to 2, redundant, hot-swap
Standard: Not redundant

Option : Redundant, hot-swap
Display x1, Keyboard / Mouse x1

*4

USB2.0 x4, Serial x2
LAN x2, Management LAN x1

445W x 722D x 88H*5, 2U rack
21kg (standard), 31kg (max)
Windows Server™

Standard Edition
Windows Server™ 2003 R2,
Standard Edition

2003,

*6 *7

/ Enterprise Edition

*6

/ Enterprise Edition
Windows Server™ 2003 R2,
Standard x64 Edition / Enterprise x64 Edition
Red Hat® Linux™

*9

*7

•

Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States

and/or other countries.

•

Intel and Intel Xeon are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

•

Linux is a trademark of Linus Torvalds.

•

Red Hat is a registered trademark of Red Hat, Inc. in the U.S.

•

All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders.

•

Specifications are subject to change without notice.

For further information, please contact:

Cat.No. E07BS4

NEC

EXPRESS5800

www.necam.com/servers