Page 1
System Release Notes
Express5800/120Ra-1
System Release Notes
PN: 455-01611-001
Page 2
Proprietary Notice and Liability Disclaimer
The information disclosed in this document, including all designs and related materials, is
the valuable property of NEC Computers Inc. and/or its licensors. NEC Computers Inc.
and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights
to this document, including all design, manufacturing, reproduction, use, and sales rights
thereto, except to the extent said rights are expressly granted to others.
The NEC Computers Inc. product(s) discussed in this document was warranted in
accordance with the terms of the Warranty Statement accompanying each product.
However, actual performance of each such product is dependent upon factors such as
system configuration, customer data, and operator control. Since implementation by
customers of each product may vary, the suitability of specific product configurations and
applications must be determined by the customer and is not warranted by NEC Computers
Inc.
To allow for design and specification improvements, the information in this document is
subject to change at any time, without notice. Reproduction of this document or portions
thereof without prior written approval of NEC Computers Inc. is prohibited.
Trademarks
Windows and WindowsNT are registered trademarks of Microsoft Corporation.
Novell and NetWare are registered trademarks of Novell, Inc.
SCO OpenServer is a trademark of The Santa Cruz Operation, Inc.
UnixWare is a registered trademark of The Santa Cruz Operation, Inc.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks
of their respective trademark owners.
455-01611-001 April 2001
Copyright 2001
NEC Computers Inc.
15 Business Park Way
Sacramento, CA 95826
All Rights Reserved
Page 3
Express5800/120Ra-1
System Release Notes
The Express5800/120Ra-1 System Release Notes provide up-to-date information
on your system. These notes also provide additional valuable information about
your system that was not included in the user’s guide.
Please read these notes in their entirety.
CONTENTS
Introduction ............................................................................................................................................3
General Comments .................................................................................................................................3
Advisories...............................................................................................................................................3
EXPRESSBUILDER .........................................................................................................................3
System Documentation ......................................................................................................................4
Page 4
nec
Page 5
Introduction
These System Release Notes cover the following topics:
General Comments
!
Advisories
!
General Comments
The following general comments apply to this server.
Versions of the Network Operating Systems tested and recommended are:
!
Windows®2000
Windows NT®4.0 Server with Service Pack 6
Novell®NetWare®5.1
SCO OpenServer™5.05 with Maintenance Supplement 505A.
UNIXWare®7.1.1
Advisories
This section contains advisories on the EXPRESSBUILDER and system
documentation.
EXPRESSBUILDER
EXPRESSBUILDER EasySetup always configures the Windows 2000
!
TCP/IP Protocol IP settings to "Obtain an IP address automatically"
(DHCP), regardless of the IP address setting specified in EasySetup. If static
TCP/IP addressing is required, TCP/IP must be reconfigured. Refer to your
Windows 2000 documentation for instructions.
The Administrator Menu in the System Information Management segment
!
of the Offline Maintenance Utility is accessible only by NEC authorized
service representatives.
EXPRESSBUILDER operates in floppy emulation mode. The emulated
!
floppy drive portion of your system CD-ROM is designated Drive A and the
remaining portion(s) of the CD-ROM is designated Drive Q. Your system
diskette drive is Drive B. After creating the Off-line Maintenance Utility
diskette, EXPRESSBUILDER prompts you to remove the diskette from
Drive B. At this prompt, remove the diskette from your diskette drive.
Express5800/120Ra-1 System Release Notes 3
Page 6
After installing Windows 2000, the Windows 2000 Device Manager may
!
show an NEC GEM SCSI Processor Device and/or an Unknown Device
under Other Devices. The Unknown Device is a reference to the baseboard
management controller. Installing the ESMPRO Agent can clear both of
these conditions.
If you already have an operating system installed when creating a
!
maintenance partition, ExpressBuilder will warn you of the existing
partition. If you want to preserve the installed operatin g system, do not
create the maintenance partition or the existing operating system will be
overlaid by the maintenance partition.
System Documentation
The following advisory applies to your Server’s Network Operating System
Configuration Guide.
In the Network Operating System Configuration Guide, Step 8 of "Installing
!
Microsoft Windows 2000 Operating System" should read as follows:
Execute "w2k\update.exe" from the "NEC Update Module" diskette.
4 Express5800/120Ra-1 System Release Notes
Loading...