Nec 61XM4 Operation Manual

Page 1
NEC Solutions (America), Inc.
Visual Systems Division
61XM4 Installation Guide
61” Plasma Display Rev 1.3

Contents:

Product Description and Notes Page 1 Ventilation Requirements Display Dimensions Front, Top & Bottom
Rear
Left & Right Side Display Dimensions w/Optional Speakers and Stand Dimensions w/Optional Wall Mount Connections Control Codes

Product Description

Type: Plasma Display Screen Surface: Anti-Reflective Resolution: 1365x768 Dimensions: 57.88”(W) x 34.64”(H) x 4.69”(D) Aspect Ratio: 16:9 Weight: 134.5lbs Color Correction: NEC CCF (Capsulated Color Filter, in panel) FCC: Class B and AccuCrimson (in front filter)

Notes

This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual). Distances are in inches, for millimeters multiply by 25.4. Distances may vary ±5%.

Maximum Tilt Angles

Below are the maximum angles that the display can be tilted in both landscape and portrait mode
Landscape 30° Portrait 10°
www.visualsystems.com PX-61XM4 Page 1 of 10
Page 2 Page 3
Page 4 Page 5 Page 6 Page 7 Page 8 Page 9
Max Tilt
Page 2
NEC Solutions (America), Inc.
Visual Systems Division
61XM4 Installation Guide
61” Plasma Display Rev 1.3
Ventilation Requirements (all models)
Dimensions below are minimum required for proper ventilation.
NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
www.visualsystems.com PX-61XM4 Page 2 of 10
Page 3
NEC Solutions (America), Inc.
Visual Systems Division
61XM4 Installation Guide
61” Plasma Display Rev 1.3
Display dimensions
53.19 (SCREEN AREA)
) A E R A
N E E R C S
( 2
9
.
9
2
1
6
1.92 54.02
57.88
0.78
0.78
0.78 5 .13
0.78
0.78
5
0
.
1
9
6
.
4
Control Buttons
AC Inlet
33.43
www.visualsystems.com PX-61XM4 Page 3 of 10
7
1
.
0
23.33
21.0519.88
16.7316.73
2.752.75
Speaker Terminal
FILTER SURFACE
1.92
LED&IR
7.89
Power Button
IR
2
9
.
1
8
4
7
6
.
.
0
4
3
3
2
9
.
1
Page 4
NEC Solutions (America), Inc.
Visual Systems Division
61XM4 Installation Guide
61” Plasma Display Rev 1.3
Display dimensions (cont.)
6 - M8 Max 12mm for PC for Mount unit
15.35
33.43
4 - M4 Max 12mm for Speaker
2
1 9
. 7
8 2
. 0 2
2 4
. 0 1
9
9
8
3
.
.
6
6
4.30
4 8
.
9
9
6
. 9 1
1.38
17.52
33.47
57.88
4.02 8.4
8 8
. 4
www.visualsystems.com PX-61XM4 Page 4 of 10
4 - M4 Max 10mm
F
4 6
8
.
2
4
. 0
3
2
9 3
. 6
4 - M4 Max 12mm for Speaker
Page 5
NEC Solutions (America), Inc.
Visual Systems Division
61XM4 Installation Guide
61” Plasma Display Rev 1.3
Display dimensions (cont.)
1.09
8
°
3
5
.
6
1
0.17
3.19
3
5
.
6
1
5
8
0
.
7
.
0
0
3.19
4.06
2.16
3.19
4.69
1.77
www.visualsystems.com PX-61XM4 Page 5 of 10
4.69
2.91
4.69
4
6
.
8
4
2
3
.
0
2
9
3
.
6
5
5
0
0
.
.
1
0
Power Button
Page 6
NEC Solutions (America), Inc.
Visual Systems Division
61XM4 Installation Guide
61” Plasma Display Rev 1.3
Dimensions with optional speakers and stand
6.38
37.91
44.30
65.00
6.38
3 8
. 1
4.69
3.77
6.97
1.77
5.28
4.45
16.92
3.543.54
4
2
6
.
0
.
4
7
2
3
9 6
. 9
1
6 3
. 2
www.visualsystems.com PX-61XM4 Page 6 of 10
Page 7
NEC Solutions (America), Inc.
Visual Systems Division
61XM4 Installation Guide
61” Plasma Display Rev 1.3
Dimensions with optional Wall Mount Kit (61WMK)
www.visualsystems.com PX-61XM4 Page 7 of 10
24.00
16.00
3
5
.
4
1
7
8
.
9
1
F
3.35
8.02
Page 8
NEC Solutions (America), Inc.
Visual Systems Division
61XM4 Installation Guide
61” Plasma Display Rev 1.3
Dimensions with optional Ceiling Mount Kit (61CMK)
15.49
33.54
www.visualsystems.com PX-61XM4 Page 8 of 10
Note: Optional Accessories
not included with 61CMK
F
5.70
10.38
Page 9
NEC Solutions (America), Inc.
Visual Systems Division
61XM4 Installation Guide
61” Plasma Display Rev 1.3
Connections
Located at right side of display
AC inlet
Power Switch
Ext. Speaker Connections
Control Panel
www.visualsystems.com PX-61XM4 Page 9 of 10
Page 10
NEC Solutions (America), Inc.
Visual Systems Division
61XM4 Installation Guide
61” Plasma Display Rev 1.3
Control Codes

Function Code Data

POWER ON 9FH 80H 60H 4EH 00H CDH OFF 9FH 80H 60H 4FH 00H CEH INPUT SWITCH VIDEO1 (BNC) DFH 80H 60H 47H 01H 01H 08H VIDEO2 (RCA) DFH 80H 60H 47H 01H 02H 09H VIDEO2 (S-Video) DFH 80H 60H 47H 01H 03H 0AH DVD1/HD1(RCA/Component) DFH 80H 60H 47H 01H 05H 0CH DVD2/HD2 (5BNC/Component) DFH 80H 60H 47H 01H 06H 0DH RGB1 (15pin HD) DFH 80H 60H 47H 01H 07H 0EH RGB2 (5BNC/RGB) DFH 80H 60H 47H 01H 08H 1FH RGB3 (DVI) DFH 80H 60H 47H 01H 0CH 13H AUDIO MUTE ON 9FH 80H 60H 3EH 00H BDH OFF 9FH 80H 60H 3FH 00H BEH PICTURE MODE NORMAL DFH 80H 60H 0AH 01H 01H CBH THEAT.1 DFH 80H 60H 0AH 01H 02H CCH THEAT.2 DFH 80H 60H 0AH 01H 03H CDH DEFAULT DFH 80H 60H 0AH 01H 04H CEH BRIGHT DFH 80H 60H 0AH 01H 05H CFH SCREEN MODE: STADIUM DFH 80H 60H 51H 01H 02H 13H ZOOM DFH 80H 60H 51H 01H 03H 14H NORMAL DFH 80H 60H 51H 01H 04H 15H FULL DFH 80H 60H 51H 01H 05H 16H
2.35:1 DFH 80H 60H 51H 01H 0AH 1BH AUTO PICTURE ON DFH 80H 60H 7FH 03H 03H 09H 00H 4DH OFF DFH 80H 60H 7FH 03H 03H 09H 01H 4EH CINEMA MODE ON DFH 80H 60H C1H 01H 01H 82H OFF DFH 80H 60H C1H 01H 02H 83H
NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable.
Cable Connection
Communication Protocol:
Interface: RS-232C Parity: Odd Communication: Asynchronous Stop Bit: 1 bit Baud Rate: 9600 bps Communication Code: Hex Data Length: 8 bits
PC Control Connector (D-Sub 9P)
NOTE: If so Desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection. These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND).
www.visualsystems.com PX-61XM4 Page 10 of 10
Loading...