Page 1
NEC Display Solutions of America, Inc.
V984Q/C981Q Installation Guide [Ver.1.1]
Contents:
Product Description and Notes Page 1
Rotation Page 1
Ventilation Recommendations Page 2
Carrying Handle Positioning Page 2
Display Dimensions
Front, Top, Right Side, Left Side, Bottom Page 3
Back Side Page 4
Display Dimensions with stand Page 5
Optional Stand Dimensions Page 6
Optional Wall Mount Dimensions Page 7
Optional Speaker Dimensions (SP-TF1) Page 8
Compute Module Integration Page 9
Input Panel Page 10
ASCII Commands Page 10
Control Codes Page 11
Cable Connection Page 11
Browser Control Page 12
Product Description:
Type: LCD Display
Resolution: 3840 x 2160 Dimensions without stand: 86.4” (W) x 49.2” (L) x 3.7” (D)
Aspect Ratio: 16:9 Dimensions with stand: 86.4”(W) x 50.6”(H) x 23.9”(D)
EMI: Class B Weight without stand: 198.4 lbs. / 90.0kg
Power Consumption: 525W (Max C981Q), 650W (Max V984Q) Weight with stand: 208.1 lbs. / 94.4kg
BTU’s: 1791.37 BTU/hour (C981Q), 2217.89 BTU/hour (V984Q)
NOTES:
• This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be
a step-by step procedure for installation.
• Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
• Distances are in inches, for millimeters multiply by 25.4.
• Distances may vary ±5%.
Tilt Angle and Rotation:
• Below is the maximum angle the monitor can be tilted. Note that the monitor can only be tilted in the landscape position.
www.necdisplay.com V984Q/C981Q Page 1 of 12
Page 2
NEC Display Solutions of America, Inc.
Ventilation Recommendations:
Dimensions below are minimum required for proper ventilation.
NOTE:
• The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered,
other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
Carrying Handle Positioning:
www.necdisplay.com V984Q/C981Q Page 2 of 12
Page 3
NEC Display Solutions of America, Inc.
Display Dimensions:
www.necdisplay.com V984Q/C981Q Page 3 of 12
Page 4
NEC Display Solutions of America, Inc.
check
the depth of the hole.
Display Dimensions (cont.):
NEC strongly recommends using size M8 screws
(15-17mm + the thickness of the bracket and washers in
length). If using screws longer than 15-17mm, please
www.necdisplay.com V984Q/C981Q Page 4 of 12
Page 5
NEC Display Solutions of America, Inc.
Display Dimensions (with optional ST-801 stand):
www.necdisplay.com V984Q/C981Q Page 5 of 12
Page 6
NEC Display Solutions of America, Inc.
Table Top Stand Dimensions (ST-801):
www.necdisplay.com V984Q/C981Q Page 6 of 12
Page 7
Optional Large Wall Mount (WMK-6598):
Optional Standard Wall Mount (WMK-3257):
NEC Display Solutions of America, Inc.
www.necdisplay.com V984Q/C981Q Page 7 of 12
Page 8
NEC Display Solutions of America, Inc.
Optional Speaker Dimensions (SP-TF1)
www.necdisplay.com V984Q/C981Q Page 8 of 12
Page 9
Compute Module Integration:
• Door on the back of the display can be opened by loosening captive screws.
• Separate IO Board is necessary to accompany RPi Compute Module in unit
NEC Display Solutions of America, Inc.
www.necdisplay.com V984Q/C981Q Page 9 of 12
Page 10
NEC Display Solutions of America, Inc.
Input Panel:
Bottom
Side (Rotated)
ASCII Common Commands:
• This monitor supports common ASCII control commands with many other NEC projectors. For more information on this, please see our
website.
www.necdisplay.com V984Q/C981Q Page 10 of 12
Page 11
Control Codes:
NEC Display Solutions of America, Inc.
NOTE: Contact your NEC representative for codes not listed.
Cable Connection
Communication Protocol:
Interface: RS-232C
Communication System: Asynchronous
Baud Rate: 9600 bps
Data Length: 8 bits
Parity: None
Stop Bit 1 bit
Communication Code: ASCII
Interface: Ethernet (CSMA/CD
Communication System: TCP/IP (Internet Protocol Suite)
Communication Layer: Transport layer (TCP)
IP Address: 192.168.0.10 (default out of box)
Port Number: 7142 (Fixed)
Transmit Data+
Transmit DataReceive Data+
Not Used
Not Used
Receive DataNot Used
Not Used
www.necdisplay.com V984Q/C981Q Page 11 of 12
Page 12
NEC Display Solutions of America, Inc.
Browser Control:
Information and control can also be available through the HTTP browser control menu.
In order to accomplish this, type: http://<the Monitor’s IP address>/pd_index.html
Note that the LAN Power needs to be turned on in order for the display to be controlled while the units are off.
All displays are set to the IP address 192.168.0.10 out of the box
Communicating network PC needs to be on the same subnet as display that is being communicated with
www.necdisplay.com V984Q/C981Q Page 12 of 12
Loading...