DDR2-667 FB-DIMM, x 4/x8 S DDC, M em ory Mirroring, On-l i ne S pare M em ory
CD-RW /DVD-ROM Combo dr i ve*3 x1 (DV D: x 8 m ax. s peed, CD: x24 m ax . speed)
1000BASE-T x2 (100BASE-TX and 10BASE-T are supported) (standard)
Serial(D-S ub 9pi n) x 2 (front x1, fear x1), US B2.0 x 6 (front x2, fear x2, i nt ernal x 2),
1000BASE-T(RJ-45) x2, LAN for Management(100BASE-TX) x1
Displ ay (M i ni D-S ub 15pin) x1, Keyboard/Mouse(PS / 2) x 1*5
Server Management Controll er (E XPRESS SCOPE Engine 2) is i nstall ed as standard.
485 x 823 x 43 (when front bez el and t he prot rudi ng obj ec ts are inc l uded)
During operation: 10 to 35º C / 20 to 80% (Non-c ondensing)
When s tored: -10ºC t o 55º C / 20% t o 80% (Non-condensi ng) *6
Wi ndows S erver 2003, Standard Edition (SP 1 or later) / E nt erpri se Edition (SP1 pr later)
Wi ndows S erver 2003 R2, Standard E di t i on / Enterprise Edit i on
Wi ndows Server 2003 R2, Standard x64 Edition / Enterprise x64 E di tion
2.5-i nch hard disk dri ve model
Quad-Core Xeon
E5405
1 (st andard) - 2 (m ax.)
Quad-Core Xeon
Supported
Intel 5000P
E5420
Quad-Core Xeon
2x6MB
1333MHz
2GB (1GB x2)
48GB (4GB x12) (when st andard DIMM s are removed)
Diskless
SAS 879GB (146. 5GB x 6)
SAS
RAID 0,1: S tandard*1, RAID 5,6: Option
Supported
Option*2
- (dedicat ed for FDD)
6[6]
LowProfile s l ot s
PCI Ex press (x8) : 1[0] (occ upi ed by RAID cont roller)
Integrated in t he Server Management Cont rol l er
8MB
Standard: Not redundant, Option: Redundant
Redundant (s t andard)
Option (not i ncluded in s erver as st andard)
Option (not i ncluded in s erver as st andard)
19inch rack m ount able, 1U rack height
425 x 718 x 43
16Kg (20Kg)
Red Hat Linux *7
X5450
Quad-Core Xeon
X5460
*1 On-board RAID is not supported on Linux configuration.
*2 The Internal FDD is not available for 2.5” hard disk drive models.
*3 Writing software is not supported.
*4 2.5-inch hard disk drive models do not provide the Riser Card op tion.
*5 The keyboard and mouse can be connected together by using a Y cable provided with the main unit.
*6 When stored at a low or high temperature, the system clock may largely deviate from the current time.
*7 Please refer to “Linux on NEC Express5800” (http://www.nec.co.jp/express/linux/index.html
)
1-4-1
120Rh-1
MODEL
N-code
CPU
Clock
2nd Cache
No. of CP U
Intel® 64
Chip set
Front S i de Bus
Memory
Standard Capacity
Maxi m um Capac i t y
Internal
HDD
FDD (US B )
Optical disk drive
LAN Interface
Devic e Bays (3.5") [open]
Disk Drive Bays(2.5”) [ open]
Ex pans i on S l ot s [open]
GraphicsChip
Ex t ernal Interfac e
Server Management
Power suppl y
Cooling fan
Keyboard
Mouse
Main unit form
Wei ght std. (max.)
Consumpt i on power Max.
St andby
DDR2-667 FB-DIMM, x 4/x8 S DDC, M em ory Mirroring, On-l i ne S pare M em ory
CD-RW /DVD-ROM Combo dr i ve*2 x1 (DV D: x 8 m ax. s peed, CD: x24 m ax . speed)
1000BASE-T x2 (100BASE-TX and 10BASE-T are supported) (standard)
Serial(D-S ub 9pi n) x 2 (front x1, rear x1), USB2. 0 x4 (front x2, rear x 2, internal x 2),
1000BASE-T(RJ-45) x2, LAN for Management(100BASE-TX) x1
Displ ay (M i ni D-S ub 15pin) x1, Keyboard/Mouse(PS / 2) x 1*4
Server Management Controll er (E XPRESS SCOPE Engine 2) is i nstall ed as standard.
485 x 823 x 43 (when front bez el and t he prot rudi ng obj ec ts are inc l uded)
During operation: 10 to 35º C / 20 to 80% (Non-c ondensing)
When s tored: -10ºC t o 55º C / 20% t o 80% (Non-condensi ng) *5
Wi ndows S erver 2003, Standard Edition (SP 1 or later) / E nt e rprise Edition (SP1 pr later)
Wi ndows S erver 2003 R2, Standard E di t i on / Enterprise Edit i on
Wi ndows Server 2003 R2, Standard x64 Edition / Enterprise x64 E di tion
3.5-i nch hard disk dri ve model
Quad-Core Xeon
E5405
1 (st andard) - 2 (m ax.)
Quad-Core Xeon
Supported
Intel 5000P
E5420
Quad-Core Xeon
2x6MB
1333MHz
2GB (1GB x2)
48GB (4GB x12) (when st andard DIMM s are removed)
Diskless
SATA: 2. 25TB (750GB x 3), SA S 900GB (300GB x 3)
SATA / SAS(option)
RAID 0,1: S tandard, RAID 5: Opt i on
Supported
Option*1
- (dedicat ed for FDD)
3[3]
LowProfile s l ot s
PCI Express (x8) : 1[ 1]
Integrated in t he Server Management Cont rol l er
8MB
Standard: Not redundant, Option: Redundant
Redundant (s t andard)
Option (not i ncluded in s erver as st andard)
Option (not i ncluded in s erver as st andard)
19inch rack m ount able, 1U rack height
425 x 718 x 43
16Kg (20Kg)
Red Hat Linux *6
X5450
Quad-Core Xeon
X5460
*1 The Internal FDD is not available for 2.5” hard disk drive models.
*2 Writing software is not supported.
*3 By replacing the standard riser card with the optional card [N8116-14], one PCI-X 64bit/100MHz slot becomes available instead of a
PCIe (x8) full height slot.
*4 The keyboard and mouse can be connected together by using a Y cable provided with the main unit.
*5 When stored at a low or high temperature, the system clock may largely deviate from the current time.
*6 Please refer to “Linux on NEC Express5800” (http://www.nec.co.jp/express/linux/index.html
)
1-4-2
120Rh-1
y)
MODEL
N-code
CPU
Clock
2nd Cache
No. of CP U
Intel® 64
Chip set
Front S i de Bus
Memory
Standard Capac i t y
Maxi m um Capac i t y
Internal
HDD
FDD (US B )
Optical disk drive
LAN Interface
Devic e B ay s (3.5") [ open]
Disk Dri ve Bays (2. 5”) [ open]
Ex pansion Sl ot s [open]
GraphicsChip
Ex t ernal Interfac e
Server Management
Power supply
Cooling fan
Keyboard
Mouse
Main unit form
Wei ght std. (max.)
Consumption power Max .
St andby
Temperature and Humidit y Condi t i on
Supported OS
(see chapter of S/W for details )
Standard Capac i t y
Maxi m um Capac i t y
Disk Controller
RAID *6
Hot-Plug
VRAM
Dimension
(WxDxH)mm
Model 120Rh-1
3.5-i nch hard disk dri ve model (non-redundant power suppl
N8100-1401FN8100-1405F
Dual-Core Xeon E5205Quad-Core Xeon X5460
1.86GHz3.16GHz
6MB
1066MHz
DDR2-667 FB-DIMM, x 4/x8 S DDC, Mem o ry Mi rr oring, O n-line Spare M emory
48GB (4GB x12) (when standard DIMM s are remo ved)
SATA: 2.25TB (750GB x 3), S A S 900GB (300GB x 3)
RAID 0,1: S tandard, RAID 5: Opt i on
CD-RW /DVD-RO M C ombo drive*2 x 1 (DVD: x8 max . s peed, CD: x24 m ax. s peed)
1000BASE-T x2 (100BA SE-TX and 10BASE-T are supported) (s tandard)
Full-Height slots
PCI Ex press (x8) : 1[ 1] *3
Integrated in t he S erver Management Cont roll er
Serial(D-Sub 9pin) x2 (front x1, rear x 1), USB2.0 x4 (front x2, rear x 2, internal x2),
1000BASE-T(RJ-45) x2, LAN for Managem ent(100BASE-TX) x1
Displ ay (M i ni D-S ub 15pi n) x 1, K eyboard/Mouse(PS / 2) x 1*4
Server Management Controller (EXPRESSSCOPE Engine 2) is installed as standard.
Option (not inc l uded i n server as standard)
Option (not inc l uded i n server as standard)
19inch rack m ount abl e, 1U rack hei ght
485 x 823 x 43 (when front bezel and t he prot ruding obj ects are included)
600VA/590W
467VA/457W
During operation: 10 t o 35º C / 20 t o 80% (Non-condens ing)
When stored: -10º C to 55ºC / 20% to 80% (Non-c ondensing) *5
Wi ndows S erver 2003, St andard E di t i on (S P 1 or la t er) / E nt e rprise Edit i on (S P 1 pr l at er)
Wi ndows Server 2003 R2, S tandard Edition /E nterprise Editi on
Wi ndows S erver 2003 R2, St andard x64 Edit ion / E nt erpri se x64 E di tion
N8100-1402F
Dual-Core Xeon X5260
3.33GHz
2x6M B
1 (st andard) - 2 (max . )
Supported
Intel 5000P
1333MHz
2GB (1GB x2)
Diskless
SATA / SAS (option)
Supported
Option*1
- (dedicat ed for FDD)
3[3]
Low profile slots
PCI Express (x8): 1[1]
8MB
Not redundant
Not redundant
425 x 718 x 43
16Kg (19Kg)
630VA/620W
474VA/464W
Red Hat Linux *6
*1 The Internal FDD is not available for 2.5” hard disk drive models.
*2 Writing software is not supported.
*3 By replacing the standard riser card with the optional card [N8116-14], one PCI-X 64bit/100MHz slot becomes available instead of a
PCIe (x8) full height slot.
*4 The keyboard and mouse can be connected together by using a Y cable provided with the main unit.
*5 When stored at a low or high temperature, the system clock may largely deviate from the current time.
*6 Please refer to “Linux on NEC Express5800” (http://www.nec.co.jp/express/linux/index.html
)
1-4-3
External Design
120Rh-1 (2.5-inch HDD model)
120Rh-1
Front View
DISK ACCESS LED DVD-ROM LAN2 ACCESS STATUS DUMPHARD DISK BAYs
Rear View
43
50
SERIAL PORT LAN1 ACCESS LED POWER SWITCH
POWER/SLEEP LED
USB CONNECTOR UID LED UID SWITCH
DRIVE LED LED SWITCH
PCI SLOT SERIAL PORT DUMP SWITCH PCI SLOT AC INLET (option)
(Low-Profile) CONNECTOR(Full-Height USB CONNECTOR AC INLET
LAN CONNECTOR DISPLAY CONNECTOR UID LED LAN2 CONNECTOR
for MS/KB CONNECTOR UID SWITCH LAN1 CONNECTOR
SERVER MANAGEMENT
773
718
485
484
425
1-4-4
External Design
120Rh-1 (3.5-inch HDD model)
120Rh-1
Front View
DISK ACCESS LED STATUS LED HARD DISK BAYs
Rear View
43
50
POWER/SLEEP LED
SERIAL PORT LAN1ACCESS LED POWER SWITCH
USB CONNECTOR UID LED UID SWITCH DVD-ROM DRIVE FDD BAY
LAN2 ACCESS LED DUMP SWITCH
PCI SLOT SERIAL PORT DUMP SWITCH PCI SLOT AC INLET (option)
(Low-Profile) CONNECTOR(Full-Height USB CONNECTOR AC INLET
LAN CONNECTOR DISPLAY CONNECTOR UID LED LAN2 CONNECTOR
for MS/KB CONNECTOR UID SWITCH LAN1 CONNECTOR
SERVER MANAGEMENT
773
718
485
484
425
1-4-5
External Design
120Rh-1 (3.5-inch HDD, non-redundant power model)
Front View
POWER/SLEEP LED
SERIAL PORT LAN1ACCESS LED POWER SWITCH
USB CONNECTOR UID LED UID SWITCH DVD-ROM DRIVE FDD BAY
DISK ACCESS LED STATUS LED HARD DISK BAYs
LAN2 ACCESS LED DUMP SWITCH
Rear View
PCI SLOT SERIAL PORT DUMP SWITCH PCI SLOT USB CONNECTOR
(Low-Profile) CONNECTOR(Full-HeightAC INLET
120Rh-1
LAN CONNECTOR DISP LAY CONNECTOR UID LED LAN2 CONNECTOR
for MS/KB CONNECTOR UID SWITCH LAN1 CONNECTOR
SERVER MANAGEMENT
773
7185043
485
425
484
1-4-6
Model 120Rh-1
2003R2R2x64
EL4EL4x64
2.5-inch HDD model [N8100-1388F/-1389F/-1390F/-1391F/-1438F/-1392F]
3.5-inch HDD model [N8100-1394F/-1395F/-1396F/-1397F/-1439F/-1398F]
3.5-inch HDD model (non-redundant power/fan) [N8100-1401F/-1402F/-1405F]
CPU Kit
CPU #1
2
CPU #2
- CPU Kit (XD/1.86G(6)) [N8101-379] <Dual-Core Xeon E5205>
- CPU Kit (XD/3.33G(6)) [N8101-380] <Dual-Core Xeon X5260>
- CPU Kit (XQ/2G(2x6)) [N8101-381] <Quad-Core Xeon E5405>
- CPU Kit (XQ/2.50G(2x6)) [N8101-382] <Quad-Core Xeon E5420>
- CPU Kit (XQ/3G(2x6)) [N8101-403] <Quad-Core Xeon X5450>
- CPU Kit (XQ/3.16G(2x6)) [N8101-383] <Quad-Core Xeon X5460>
• Do not use processors of different processor numbers at the same time.
Additional Memory Module
120Rh-1
: Standard
: Exclusive
connection
* You cannot use
the two slots or
ports at the
same time.
12
1GB DIMM
1GB DIMM
DIMM bank
DIMM bank
DIMM bank
DIMM bank
DIMM bank
- Additional 1GB memory module set [N8102-309] (512MB x2)
- Additional 2GB memory module set [N8102-310] (1GB x2)
- Additional 4GB memory module set [N8102-311] (2GB x2)
- Additional 8GB memory module set [N8102-312] (4GB x2)
• Each memory module set includes a pair of DIMMs.
• Two 1GB DIMMs are factory-installed.
• Y ou can expand the memory capacity up to 48GB by replacing the standard DIMMs.
• The 120Rh-1 supports x4/x8 SDDC, Memory Mirroring, and On-line Sparing.
• DIMM mu st be inserted from Group #1 toward Group#6 in ascending order.
• To enable the memory mirroring and on-line sparing mode, see the next page.
• When you use locally procured non-NEC memory modules, see Chapter 2 Information of
Local Procurement.
Maximum available memory
- See the table below for the maximum memory size that you can actually use on your
system.
- The maximum available memory is less than the maximum physical memory supported
by your system because some chipsets require PCI resource space of about 750MB.
The PCI resource capacity varies by type and number of PCI cards you are using.
4GB
32GB
128GB
16GB
64GB
128GB
Maximum memory size supported by OS
Microsoft Windows Server 2003, Standard Edition (SP1)
Microsoft Windows Server 2003 R2, Standard Edition
Microsoft Windows Server 2003, Enterprise Edition (SP1)
Microsoft Windows Server 2003 R2, Enterprise Edition
Microsoft Windows Server 2003 R2, Standard x64 Edition
Microsoft Windows Server 2003 R2, Enterprise x64 Edition
RedHat Enterprise Linux ES4(x86 / EM64T)
RedHat Enterprise Linux AS4 (x86)
RedHat Enterprise Linux AS4 (EM64T)
Maximum available memory
(The 120Rh-1 supports up to 48GB.)
4GB
32GB
48GB
All maximum physical memory
available
16GB
48GB
All maximum physical memory
available
48GB
All maximum physical memory
available
1-4-7
120Rh-1
Memory Mirroring / On-line Spare Memory
The 120Rh-1 supports memory mirroring and online spare memory as standard to improve memory reliability.
• Follow the rules for installing memory DIMMs.
• To enable online spare memory, go to BIOS Setup.
• You cannot use the standard memory mode, memory mirroring, and online spare memory at the same time in the same
system.
Standard memory modeMemory Mirroring
Configuration
Functions
Capacity
Hot plug
Reliability
Memory branch #0
MB
Memory branch #1
Not redundant
(default)
Same as physical capacity
Not removable during operation
Not redundant
Memory branch #0
MB
Memory branch #1
Data mirrored between memory branch #0
Half the physical capacity
Not removable during operation
Requirements for Memory Mirroring
• The branch #0 and #1 must be identical in DIMM configuration
(size and position).
• No mirroring can be configured between the DIMMs on the same
memory branch.
Chipset (Memory Controller)
Memory Branch #0Memory Branch #1
On-line Spare Memory
Mirrored
データ1
データ2
データ3
Memory branch #0
MB
data1
data2
Data3
Mirrored set
and #1
Memory branch #1
A faulty DIMM automatically fails over to a
spare memory on the same memory branch.
Physical capacity does not include spare
memory.
Not removable during operation
Fully redundant
A faulty DIMM automatically fails over to a
spare memory on the same memory branch.
Requirements for Online Spare Memory
• Memory sizes must be the same across memory groups on the
same memory branch.
• Memory sizes may vary by memory branches.
• The memory groups farthest from the memory branches are spares.
MemoryBranch#0 MemoryBranch#1
In the event
of a memory
failure, a
spare DIMM
takes over a
faulty DIMM
online.
The mirrored branch
must have the same
Group#1
DIMM#11
DIMM#21
=
DIMM#31
DIMMs in the same
positions as
configured on the
primary branch.
Your logical memory capacity is calculated using one of the following two formulas:
When you are using 1GB Memory Module Set [
When you are using 1GB Memory Module Set [
[Logical capacity]
[Logical capacity]
[Total of physical capacities] ] ––
==[Total of physical capacities
When you are using Standard 1GB memory or
Additional 2GB/4GB//8GB Memory Module Set [N8102-310/-311/-312]:
[Logical capacity]
= [Total of physical capacities] – [Physical capacity per memory group]] / 2
*[N8151-73A] is not available for 2.5-inch hard disk drive models.
FDD
2003R2R2x64
-External Floppy disk Drive Unit [N8160-74]
EL4EL4x64
EL4EL4x64
• Each of the front and rear panels features two USB ports.
1-4-10
2
LAN I/F
LAN I/F
(RJ-45)
(RJ-45)
LAN connection
• Standard on-board LAN interfaces can configure AFT/ALB.
• Standard LAN interface and optional LAN board cannot configure AFT/ALB.
<1000BASE-T / 100BASE-TX / 10BASE-T>
120Rh-1
(Front panel)
Serial I/F
1
(D-sub 9pin)
(Rear panel)
Serial I/F
1
(D-sub 9pin)
Power Unit
2
(Empty slot)
Fans
• One serial I/F is on the front panel and the other is on the rear panel.
RS-232C straight cable
- 1.5m [K210-01(01)]
RS-232C devices
- Modem, etc.
UPS
- Local procurement
• One power unit is supplied as standard.
• To configure hot plug Redundant Power Supply in the 120Rh-1 (except nonredundant models [N8100-1401F/-1402F/-1405F]), use an optional power supply
unit [N8181-50F].
Power Unit
*An empty power unit slot is not provided in N8100-1401F/-1402F/-1405F.
• The 120Rh-1 (except non-redundant models [N8100-1401F/-1402F/-1405F]) is
equipped with redundant cooling fans as standard.
• Additional cooling fans cannot be installed.
- [N8181-50F]
Rack mount option
Cable Arm
• The Cable arm [N8143-70] is used to bundle cables at rear.
• The dimension with the Cable arm [N8143-70] is 485Wx890Dx43Hmm
(including front bezel and protruding objects).
- [N8143-70]
1-4-11
HDD Configuration
120Rh-1
HDD Configuration
• Choose one configuration from the varieties belo w.
•The HDD carriers are NOT required for locally purchased non-NEC HDDs as the HDD carriers are
provided with the main unit. See the “Information of Local Procurement” in the Chapter 2 for details.
HDD Configuration (1)
2.5-inch hard disk model
2003R2R2x64
EL4EL4x64
SAS / RAID0,1 / Hot Plug
HDD Configuration (2)
2.5-inch hard disk model model
2003R2R2x64
EL4EL4x64
SAS / RAID0,1,5,6 / Hot Plug
Disk bay
Disk bay
6
Disk bay
Disk bay
Disk bay
Disk bay
HDDs
- 36.3GB HDD (10,000rpm) [N8150-219]
- 73.2GB HDD (10,000rpm) [N8150-220]
- 146.5GB HDD (10,000rpm) [N8150-228]
- 36.3GB HDD (15,000rpm) [N8150-240]
- 73.2GB HDD (15,000rpm) [N8150-241]
• Allows up to six HDDs
• Supports RAID0,1
• To configure RAID 5 and 6, a RAID Upgrade Kit [N8103-119] is required.
Inserted to a
PCIe slot
as standard
<2.5-inch SAS HDD>
The cables are provided
with the main unit.
RAID controller (PCIe card installed in as standard)
<PCIe (x8) RAID 0,1 128MB cache>
Additional DAC Battery
- RAID Battery Backup Unit [N8103-120]
RAID Upgrade Kit
For RAID 5/6 configuration
- [N8103-119]
1-4-12
120Rh-1
3
Disk bay
Disk bay
Disk bay
HDD Configuration (3)
3.5-inch hard disk model
SATA / non-RAID / non-Hot Plug
HDD Configuration (4)
3.5-inch hard disk model
SATA / RAID 0,1 / Hot Plug
HDDs
- 80GB HDD (7,200rpm) [N8150-207A]
- 160GB HDD (7,200rpm) [N8150-208A]
- 250GB HDD (7,200rpm) [N8150-209A]
- 500GB HDD (7,200rpm) [N8150-229]
- 750GB HDD (7,200rpm) [N8150-237]
• Allows up to three HDDs
• Supports RAID0,1 (LSI Logic Embedded MegaRAID™)
<3.5-inch SATA HDD>
Internal Serial ATA I/F <Serial ATAII/300>
2003R2R2x64
2003R2R2x64
The cables are provided
with the main unit.
1-4-13
120Rh-1
3
Disk bay
Disk bay
Disk bay
HDD Configuration (5)
3.5-inch hard disk model
SAS,SATA / RAID 0,1 / Hot Plug
HDDs
- 80GB HDD (7,200rpm) [N8150-207A]
- 160GB HDD (7,200rpm) [N8150-208A]
- 250GB HDD (7,200rpm) [N8150-209A]
- 500GB HDD (7,200rpm) [N8150-229]
- 750GB HDD (7,200rpm) [N8150-237]
HDDs
- 36.3GB HDD (15,000rpm) [N8150-199]
- 73.2GB HDD (15,000rpm) [N8150-200]
-146.5GB HDD (15,000rpm) [N8150-201]
- 300GB HDD (15,000rpm) [N8150-226]
• Allows up to three HDDs
<3.5-inch SATA HDD>
<3.5-inch SAS HDD>
RAID controller
Insert into
PCIe slot
- [N8103-116] <PCIe(x8), RAID 0/1, 128MB cache>
Additional DAC battery
- RAID Battery Backup Unit [N8103-120]
2003R2R2x64
EL4EL4x64
The cables are provided
with the main unit.
Internal SAS I/F
HDD Configuration (6)
3.5-inch hard disk model
SAS,SATA / RAID 0,1,5 / Hot Plug
• Allows up to three HDDs
RAID controller
Insert into
PCIe slot
- [N8103-117] <PCIe(x8), RAID 0/1/5, 128MB cache>
Additional DAC battery
- RAID Battery Backup Unit [N8103-120]
2003R2R2x64
EL4EL4x64
1-4-14
LAN
120Rh-1
PCI slot
-100BASE-TX adapter (PCI) [N8104-111]*
-1000BASE-T adapter (PCI-X) [N8104-119]*
-1000BASE-T adapter (PCI-X) [N8104-120]*
-1000BASE-SX adapter (PCI) [N8104-112]*
-1000BASE-T adapter (PCIe(x1)) [N8104-126]*
-1000BASE-T adapter (PCIe(x4)) [N8104-121]*
-1000BASE-T adapter (PCIe(x4)) [N8104-122]
-10GbE adapter (PCIe(x8)) [N8104-123A]*
* For locally purchased non-NEC LAN adapters,
see the “Information of Local Procurement” in the Chapter 2.
SCSI controller for Device Expansion Unit
2003R2R2x64
2003R2R2x64
EL4EL4x64
- SCSI controller [N8103-95] <Ultra160 SCSI>
- SCSI controller [N8103-75] <Ultra320 SCSI>*
- SCSI controller [N8103-107] <Ultra320 SCSI>*
*You cannot use N8103-75 and N8103-107 at the same time.
-SCSI cable O
[K410-94(01)]
Device Expansion Unit
[K410-94(02)]
2003R2R2x64
EL4EL4x64
LAN
connection
See section 1.9 “Device Expansion Unit.“
SAS controller
2003R2R2x64
- [N8103-104]
Fibre channel controller
- [N8190-127]
- [N8190-131]
<1ch, 4Gbps, optical>
<2ch, 4Gbps, optical>
Fibre channel controller
- [N8190-120]
See section 1.8 “Disk Expansion Unit.“
<1ch, 2Gbps, optical>
EL4EL4x64
2003R2R2x64
EL4EL4x64
2003R2R2x64
EL4EL4x64
SATA/SAS
Disk Array Unit
NEC Storage S Series
Fibre Channel
Disk Array Unit
Fibre Channel
Disk Array Unit
Full-Height
Riser Card
Riser Card Variety (Full-Height)
- Standard: PCIe (x8) x1
- [N8116-14]*1: PCI-X 64bit/100MHz x1
*1: The 2.5-inch hard disk drive models do not support the riser card [N8116-14].
1-4-15
120Rh-1
Server Management (EXPRESSSCOPE Engine 2)
On-board
RAS chip
The 120Rh-1 features the EXPRESSSCOPE Engine 2 remote management controller as standard. The
optional Remote KVM and Media License [N8115-03] allows for advanced server management.
Standard
EXPRESSSCOPE Engine 2
•Features a dedicated LAN port
(100BASE-TX/10BASE-T) for
remote sever management
*2 By replacing the standard riser card witn an optional Riser Card [N8116-14],
the Full-Height PCI-Express x8 slot becomes a 64bit/100MHz PCI-X slot.
*3 You cannot configure AFT and ALB across two different LAN boards.
*4 10BASE-T is not supported.
Note:
You cannot create an AFT or ALB team across the standard LAN interface and optional LAN board.