User’s Guide
HDD Cage
Proprietary Notice and Liability
Disclaimer
The information disclosed in this document, including all designs and related materials, is the valuable
property of NEC Computers International and/or its licensors. NEC Computers International and/or its
licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said
rights are expressly granted to others.
The NEC Computers International product(s) discussed in this document are warranted in accordance
with the terms of the Warranty Statement accompanying each product. However, actual performance
of each product is dependent upon factors such as system configuration, customer data, and operator
control. Since implementation by customers of each product may vary, the suitability of specific product configurations and applications must be determined by the customer and is not warranted by NEC
Computers International.
To allow for design and specification improvements, the information in this document is subject to
change at any time, without notice. Reproduction of this document or portions thereof without prior
written approval of NEC Computers International is prohibited.
P/N: 6919150000
Copyright 2003
NEC Computers International B.V.
Nieuweweg 279
6603 BN Wijchen
The Netherlands
All Rights Reserved
iii
CONTENTS
Proprietary Notice and Liability Disclaimer ....................................................................................................................i
CONTENTS.......................................................................................................................................................................iii
Using This Guide ................................................................................................................................................................v
Text Conventions........................................................................................................................................................vi
Related Documents....................................................................................................................................................vii
Safety Notices...........................................................................................................................................................viii
Warning: Safety Notices for Users Outside of the USA and Canada..........................................................................x
Fire Related Notices ...................................................................................................................................................xi
Shock Related Notices...............................................................................................................................................xii
Care and Handling ....................................................................................................................................................xiii
Precautions for Use...................................................................................................................................................xiv
System Overview .............................................................................................................................................................1-1
Identifying Items.......................................................................................................................................................1-2
Part Names and Functions ........................................................................................................................................1-3
Handling the HDD Cage .................................................................................................................................................2-1
Removing or replacing the HDD Cage.....................................................................................................................2-2
Making Connections .......................................................................................................................................................3-1
Installing Hard Disk Drives............................................................................................................................................4-1
Appendix .........................................................................................................................................................................A-1
Operation / Maintenance..........................................................................................................................................A-2
Specifications...........................................................................................................................................................A-2
iv
Using This Guide v
Using This Guide
This User’s Guide provides a quick reference to information about the HDD Cage.
Its goal is to familiarize you with the HDD Cage and the tasks necessary to make it functional.
This guide contains the following information:
■ Chapter 1, ‘System Overview’ provides an overview of the HDD Cage and
describes its major components. Refer to this chapter to familiarize yourself with
the HDD Cage.
■ Chapter 2, ‘Handling the HDD Cage’ tells you how to remove and/or replace a
HDD Cage.
■ Chapter 3, ‘Making Connections’ tells you how to make cables connections
between your system and the HDD Cage.
■ Chapter 4, ‘Installing Hard Disk Drives’ provides you with instructions to install
Hard Disk Drives within the HDD Cage.
■ The ‘Appendix’ provides you with instructions for the HDD Cage maintenance
and with technical specifications.
Using This Guide vi
Text Conventions
This guide uses the following text conventions.
Warnings, cautions, and notes have the following meanings:
WARNING
Warnings alert you to situations that could result in serious personal
injury or loss of life.
CAUTION
Cautions indicate situations that can damage the system hardware or
software.
Note: Notes give important information about the material
being described.
■ Names of keyboard keys are printed as they appear on the keyboard. For example,
Ctrl, Alt, or Enter.
■ Text or keystrokes that you enter appear as boldface type. For example, type
abc123 and press ENTER.
■ Files names are printed in uppercase letters. For example, AUTOEXEC.BAT.
Using This Guide vii
Related Documents
In addition to this guide, the following documentation is included on the FASTTRAKTM SATA RAID Disk Array Controller CD-ROM.
■ S-ATA RAID Controller User’s Guide
The S-ATA RAID Controller User’s Guide contains important information on
using your controller board. Refer to this guide for detailed explanations on how to
install the controller, use the on-board FastBuild utility to configure arrays and
take full advantage of maintenance features. This guide also describes how to connect the optional battery backup unit.
■ Promise Array Management User’s Guide
The Promise Array Management (PAM) Utility User’s Guide describes how to use
the management utility shipped with your RAID controller. Refer to this guide for
detailed explanations on how to install PAM and manage your S-ATA RAID system using this utility.
■ S-ATA RAID Controller Setup Guide
The supplementary Setup Guide gives you instructions for installing the driver
required to use the RAID controller.
For more information, also refer to the user’s guide of your system on the EXPRESSBUILDER CD-ROM.
Using This Guide viii
Safety Notices
Caution:
Lithium batteries can be dangerous. Improper handling of lithium
batteries may result in an explosion. Dispose of lithium batteries as
required by local ordinance. Replace only with the same or equivalent
type battery.
The equipment uses 3-wire, grounded power cords. To prevent
electrical hazards, do not remove or defeat the ground prong on the
power cords. Replace a power cord if it gets damaged. The detachable
power supply are intended to serve as the disconnect devices. Contact
your dealer for an exact replacement.
The DC push-button on/off switch on the front panel does not turn off
the system AC power. Also, +5vdc is present on the system board
whenever the AC power cords are connected between the system and
an AC outlet. Before doing the procedures in this manual, make sure
that your system is powered off and unplug the AC power cords from
the back of the chassis. Failure to disconnect power before opening
your system can result in personal injury and equipment damage.
Under no circumstances should the user attempt to disassemble the
power supply. The power supply has no user-replaceable parts. Inside
the power supply are hazardous voltages that can cause serious
personal injury. A defective power supply must be returned to your
dealer.
Never connect the ground wire to a gas pipe. There is a risk of a gas
explosion.
Immediately after powering off the system, components such as CPU
processor heatsinks and hard disk drives may be very hot. Wait for the
system to cool down completely before adding / removing components.
Do not attempt to remove a device while it is in operation. Device
malfunction or personal injury may result.
Be careful not to get your fingers or hair caught in cooling fans located
in the back of a running server.
Using This Guide ix
■ Be sure to power off the equipment and unplug its power cords from the wall outlet
before installation/relocation. All voltage is removed only when the power cords
are unplugged.
■ Turn off your cellular phone or pager when you use the equipment. Their radio
waves may cause the equipment to malfunction.
■ Do not use damaged power cords. Replace it with a new one of the same type.
■ In the U.S.A. and Canada, the power cord must be a UL-listed detachable power
cord (in Canada, CSA-certified), type ST or SJT, 16 AWG, 3-conductor, provided
with a molded-on NEMA type 5-15 P plug cap at one end and a molded-on cord
connector body at the other end. The cord length must not exceed 9 feet (2.7
meters).
■ Outside the U.S.A. and Canada, the plug must be rated for 250 VAC, 10 amp
minimum, and must display an international agency approval marking. The cord
must be suitable for use in the end-user country. Consult your dealer or the local
electrical authorities if you are unsure of the type of power cord to use in your
country. The voltage change occurs via a switch in the power supply.
Using This Guide x
Warning: Safety Notices for Users Outside of the
USA and Canada
■ PELV (Protectec Extra-Low Voltage) Integrity: To ensure the extra-low
voltage integrity of the equipment, connect only equipment with mains-protected
electrically-compatible circuits to the external ports.
■ Remote Earths: To prevent electrical shock, connect all local (individual office)
computers and computer support equipment to the same electrical circuit of the
building wiring. If you are unsure, check the building wiring to avoid remote earth
conditions.
■ Earth Bonding: For safe operation, only connect the equipment to a building
supply that is in accordance with current wiring regulations in your country. In the
U.K., those regulations are IEE.
Using This Guide xi
Fire Related Notices
Caution:
To prevent fires, and damage to the equipment and supply wiring,
make sure that the rated load of the power branch circuit is not
exceeded. Equipment nameplate ratings should be used when
addressing this concern. For more information on installation and wiring
of power-related facilities, contact your electrician or local power
company.
If the equipment emits smoke, odor, or noise, immediately turn off the
POWER switch, unplug the cord, and contact your sales agent. There
may be a risk of a fire.
Use a wall outlet with the specified voltage rating and power type.
Otherwise, there is a risk of fire or current leakage.
Avoid installing the equipment where you may need an extension cord.
If you use a cord that does not meet power specifications, there is a risk
of overheating that could lead to a fire.
Insert the plug firmly into an outlet. Otherwise, there is a risk of heat or
fire due to a poor contact. If dust settles on the slots and it absorbs
moisture, there is also a risk of heat or fire.
Use only the supplied power cords. If the rated current of the power
cord is exceeded, there is a risk of fire. Also observe the following
prohibitions to prevent damages to cords:
Do not pull on the cord.
Do not pinch the cord.
Do not bend the cord.
Keep chemicals away from the cord.
Do not twist the cord.
Do not place any object on the cord.
Do not bundle several cords.
Do not alter, modify, or repair the cord.
Do not staple the cord.
Use only interface cables designed for your server. Identify which
component or connector to attach beforehand. If you use a wrong cable
or make a wrong connection, there is a risk of short-circuit that could
lead to a fire. You also have to observe the following prohibitions about
handling and connecting interface cables:
Do not use any damaged cable connector.
Do not step on the cables.
Disconnect the power plug from the outlet occasionally and clean the
plug with a dry cloth. Heat will be generated if condensation is formed
on a dusty plug, which may cause fire.
Firmly install all power cords interface cables and/or boards. An
incompletely installed component may cause a contact failure, resulting
in smoke and/or fire.
Using This Guide xii
Shock Related Notices
WARNING
Do not insert a wire or metal objects into a vent or disk drive slot. There
is a risk of an electric shock.
Do not let water or foreign objects (e.g., pins or paper clips) enter the
equipment. There is a risk of a fire, electric shock, and breakdown.
When such objects accidentally enter the equipment, immediately turn
off the power and unplug the cord. Contact your sales agent instead of
trying to disassemble it yourself.
Do not plug/unplug a power cord with wet hands. There is a risk of an
electric shock.
Make sure to power off the server and unplug the power cord from a
power outlet before installing/removing any optional internal device or
connecting/disconnecting any interface cable to/from the server. If the
server is powered off, but its power cord is plugged to a power source,
touching an internal device, cable, or connector may cause an electric
shock or a fire.
Unless described herein, never attempt to disassemble, repair, or alter
the equipment. There is a risk of an electric shock or fire as well as
malfunction.
You may want to unplug the equipment if a thunderstorm is eminent. Do
NOT touch the equipment and cables during a thunderstorm in your
area. There is a risk of a fire or electric shock.
Make sure to power off the server and disconnect the power plug from
a power outlet before cleaning or installing/removing internal optional
devices. Touching any internal device of the server with its power cord
connected to a power source may cause an electric shock even if the
server is off.
Using This Guide xiii
Care and Handling
Use the following guidelines to properly handle and care for your system.
Protect the system from extremely low or high temperatures. Let the
system warm (or cool) to room temperature before using it.
Keep the system away from magnetic forces.
Keep the system dry. Do not wash the system with a wet cloth or pour
fluid into it.
Protect the system from being bumped or dropped.
Check the system for condensation. If condensation exists, allow it to
evaporate before powering on the system.
Keep the system away from dust, sand, and dirt.
Using This Guide xiv
Precautions for Use
The following precautions must be taken when using this product. Ignoring these precautions while using this product may damage data and/or other devices:
■ To prevent data loss, make sure to regularly backup essential data saved on the
hard disk drive.
■ This product is a HDD Cage used to connect hard disk drives to the Express5800
series.
■ This product can be connected with the S-ATA Disk Array Controller but not with
any other Disk Array Controllers or mirroring boards.
■ The Hard Disk Drives to be installed in this product must be contained in the
dedicated HDD trays. Contact the sales representative about the hard disk drives
that can be installed in this product.
■ Refer to the User’s Guide provided with the basic unit or contact the sales
representative for the base units to which this HDD Cage can be installed.
■ This product is a highly sensitive electronic device. Before handling this product,
put your hand on the metal frame of the base unit to discharge static electricity
from your body.
■ Do not drop this product nor hit it against other objects.
System Overview 1-1
1
System Overview
• Identifying items
• Part Names and Functions
System Overview 1-2
Identifying Items
Identify the following items :
■ S-ATA HDD Cage with four trays
■ I2C Cable
Figure 1-1: Identifying Items
S-ATA HDD Cage with four trays I2C Cable
+
System Overview 1-3
Part Names and Functions
Figure 1-2: HDD Cage Part Names and Functions
1
Channel 1 (Port 1) S-ATA Connector
S-ATA Connector is to be connected to channel 1 on the S-ATA Disk
Array Controller.
2
Channel 2 (Port 2) S-ATA Connector
S-ATA Connector is to be connected to channel 2 on the S-ATA Disk
Array Controller.
3
Channel 3 (Port 3) S-ATA Connector
S-ATA Connector is to be connected to channel 3 on the S-ATA Disk
Array Controller.
4
Channel 4 (Port 4) S-ATA Connector
S-ATA Connector is to be connected to channel 4 on the S-ATA Disk
Array Controller.
5
I2C Connector
I2C Connector to be connected to the I2C cable.
6
Power Connectors
Power Connectors to which the Base Unit 5VDC and 12VDC power
cords are to be connected.
7
LED Connector Pins (2)
Connector pins control the Disk Access lamp (green) inside the Base
Unit.
1
2
3
4
5
6
7
System Overview 1-4
Handling the HDD Cage 2-1
2
Handling the HDD Cage
Handling the HDD Cage 2-2
Removing or replacing the HDD Cage
WARNING
Unplug the power cord from the wall outlet before installation. If you
touch parts inside the controller with the power cord plugged, there is a
risk of an electric shock.
Pull out the power cord by holding onto the plug. Pulling the cord may
damage the cord coating resulting in power leakage or electric shock.
When installing or removing this controller, do not insert or remove the
plug for the system with wet hands. Otherwise there is a risk of an
electric shock.
CAUTION
The internal parts of the system are very hot immediately after the
power is turned off. Make sure that the temperature is low enough
before installing the HDD Cage.
1. Terminate all the applications running and shut down the system.
2. Turn off the power of the system and then remove all the power cords of the power unit
from the wall outlet.
3. Remove the side cover and components refering to the system user’s guide.
4. Open the front door of the system and remove the installed hard disk drives.
Note: Note the installation of hard disk drives before removing
them.
5. Remove all cables from the HDD Cage.
6. Remove the six screws securing the HDD Cage and carefully pull the HDD cage out of
the system.
Handling the HDD Cage 2-3
7. Install the new cage in the installation slots of the system paying attention to the
direction of the HDD Cage. Please refer to the Making Connections section of this
guide for details.
8. Install the hard disk drives removed in 4 in their original slots. Please refer to the
Installing Hard Disk Drives section of this guide for details.
HDD Cage
Handling the HDD Cage 2-4
Making Connections 3-1
3
Making Connections
Making Connections 3-2
1. Make sure that the Disk Array Controller (S-ATA) is installed in the system. If not,
install the Disk Array Controller into the system.
Note: Refer to the Disk Array Controller user’s guide for details
on installing the Disk Array Controller.
2. Connect the LED cable connector (black) to the LED connector pins (2) of the HDD
Cage.
Figure 3-1: Connecting the LED Cable
Note:
- The LED Cable is an accessory of the system.
- Refer to the system user’s guide for details about connecting the LED
cable to the motherboard.
BLACK cable
RED cable
LED cable
Making Connections 3-3
3. Connect the power cables to the two power connectors on the HDD Cage.
Note: Use two power cables instead of a single power cable
for the power cable connection to the HDD Cage.
Figure 3-2: Connecting the Power Cables
4. Route the S-ATA cables within the chassis of the system as shown in the figure below.
Note:
- The S-ATA cables are accessories of the Disk Array Controller.
- Make sure that the connectors at the other ends of the S-ATA cables
are connected to the Disk Array Controller. If not, connect the S-ATA
connectors to the Disk Array Controller. Refer to the Disk Array
Controller user’s guide for more details.
Figure 3-3: Routing the S-ATA Cables
Power cables
HDD cage
S-ATA cables (4)
LED cable
Making Connections 3-4
5. Connect the four cables to the HDD cage. When connecting cables, the channel
numbers on the HDD cage must match the numbers on the cables.
Figure 3-4: Connecting the S-ATA Cables
6. Connect the I2C cable to the I2C connector on the HDD Cage. Connect the connector
at the other end of the cable to the Disk Array Controller. Refer to the Disk Array
Controller user’s guide for more details.
Figure 3-5: Connecting the I2C Cable
Note:
- You can see the channel numbers (CH1, CH2, CH3, and
CH4) near the cable connectors.
- Connect the cables to the connectors aligned in the order of
CHANNEL1 (Port1), CHANNEL2 (Port2), CHANNEL3
(Port3), and CHANNEL4 (Port4) from the bottom to the top.
- Insert the cables straight into the connectors of the HDD
Cage.
CHANNEL4 (Port4)
CHANNEL3 (Port3)
CHANNEL2 (Port2)
CHANNEL1 (Port1)
I2C cable
Making Connections 3-5
7. After connecting all the cables including the S-ATA cables, fix them with cable
clamps. Always make sure that the cables are connected straight and securely.
Figure 3-6: Connections General View
Note:
1. The cable clamps are accessories of the Disk Array
Controller.
2. Refer to Disk Array Controller user’s guide for details
about the positions on which the clamps are to be
attached.
S-ATA cables
I2C cable
LED cable
S-ATA Disk Array Controller
Power ca
bl
es
Hdd
Cage
Making Connections 3-6
Figure 3-7: Connections Diagram
8. Install the side cover and components removed in 3 of the Handling the HDD Cage
section. Refer to the system user’s guide for details.
IDE #3
PCI#1
IDE #2
IDE #1
PCI#2
PCI#3
PCI#4
PCI#5
CH1 CH2 CH3 CH4
Option
Option
Option
CD-ROM
5.25-inch
device bay
3.5-inch
disk bay
(Optional
hard disk
drives)
S-ATA RAID controller board
Floppy Disk
DAC LED connector
Master
Master
Master
Master
IDE cable
FDD cable
LED cable
I2C cable
Installing Hard Disk Drives 4-1
4
Installing Hard Disk Drives
Installing Hard Disk Drives 4-2
CAUTION
Handle Hard Disk Drives carefully so that they may not be given
shocks. A shock may cause the hard disk drives to break down.
1. Remove the four screws and the spacer from the tray.
Note: The removed screws will be used to install the hard disk
drive and the tray
CAUTION
For cooling purposes, do not leave any empty slot.
Figure 4-1: Tray
Spacer
Tray
Screw
Installing Hard Disk Drives 4-3
2. Fix the S-ATA hard disk drive on the tray with four screws.
Figure 4-2: S-ATA Hard Disk Drive
3. Push the pale green switch (it is located on the handle of the tray in which a hard disk
drive is installed) to release the lock. Then pull out the handle.
4. Hold the hard disk drive (with tray) to be added and the handle securely to insert the
hard disk drive into the slot.
Note: Take extreme care not to give vibration or shock to the
hard disk drive.
Handle
Switch
(pale green)
Disk Lamp (indicates
hard disk drive status)
Installing Hard Disk Drives 4-4
5. Push the hard disk drive until the handle hits the frame and push the handle slowly into
the tray until it is locked with a click. Then, push the center of the handle so that the
hard disk drive is fully inserted.
Figure 4-3: Inserting the hard disk drive.
Note: Be careful not to put your fingers between the handle
and the tray
6. Close the front door of the basic unit when all the hard disk drives are installed.
Appendix A-1
Appendix
• Operation / Maintenance
• Specifications
Appendix A-2
Operation / Maintenance
When you require maintenance service, please contact your sales representative or agency.
Specifications
External dimensions 156 mm (width) x 222 mm (height) x 205 mm (depth)
Weight 1.78 kg
Power consumption 4.7 Watts
Operating temperature 10 to 45° C
Operating relative
humidity
20 to 80% (non-condensing)
Loading...