Navman 4100, 4420, 4470 User Manual

English Edition

Bluetooth™ GPS Receiver

4100 / 4420 / 4470

User Manual

Bluetooth GPS Receiver | User Manual

Contents

1. Introduction ................................................................................ 3

2. Bluetooth GPS Receiver Features ..............................................

3. Connecting the Bluetooth GPS Receiver to your PDA ...............

4. Positioning the Bluetooth GPS Receiver in a Vehicle .................

5 Batteries ................................................................................... 10

6 Optional Accessorie

7. Support Information ................................................................. 13

s ............................................................... 11

Bluetooth GPS Receiver | User Manual

1. Introduction

Whether you travel in your own country, or overseas, the Bluetooth™ GPS Receiver will provide you with a Global Positioning System (GPS) based location accurate to within 5 m (15 ft) for 95% of the time.

The Bluetooth GPS Receiver contains:

• A GPS antenna to receive signals from the GPS satellites,

• An internal microcomputer to calculate the position of the receiver on Earth, and

• A Bluetooth link to send the GPS position to your PDA within a radius of less than 10 m (33 ft)

When using in a vehicle, the Bluetooth GPS Receiver can be mounted on your dash or back window in a position where it has a clear view of the sky and can receive GPS signals easily.

GPS and GPS Signals

The Global Positioning System (GPS) is a network of satellites that transmit accurate time and position information worldwide. GPS receivers receive signals from these satellites, and use the information to determine their exact location.

GPS satellites orbit the Earth at around 12,000 miles. While a GPS receiver can detect signals from up to 12 satellites at any time, only three are needed to provide a two-dimensional position or “ﬁx” (latitude and longitude) required for vehicle navigation systems. GPS data is available free of charge for any user.

The Bluetooth GPS Receiver will send the GPS position information to your PDA which may then be used by your third-party software to plot your position on a map and direct you to your destination.

Safety Notice

In a vehicle, it is your sole responsibility to place, secure and use the Bluetooth GPS Receiver in a manner that will not cause accidents, personal injury or property damage. It is your sole responsibility to observe safe driving practices and to ensure that the vehicle mount installation instructions are read carefully, understood and used consistently with the laws of operation for each country in which the device is used.

It is your sole responsibility to adhere to the following safety instructions at all times:

• Do not operate the Bluetooth GPS Receiver while driving or place the receiver in a position that obstructs the driver’s view

• Do not mount in a way that interferes with airbags or other safety equipment

• Do not leave in view while your vehicle is unattended, especially in strong sunlight

• Do not use or handle the Bluetooth GPS Receiver when it is hot, leave it to cool out of direct sunlight.

Navman disclaim all liability for use of this product in a way that may cause accidents, damage or that may violate law.

Bluetooth GPS Receiver | User Manual

2. Bluetooth GPS Receiver Features

It is recommended that you familiarise yourself with the basic operations of your Bluetooth GPS Receiver:

Top Components

1 2

Component Description

1 On/Off Button

2 Indicator Light

External Power Adapter

Socket

To turn on To turn off: Press for two seconds and release.

The Bluetooth GPS receiver will automatically turn off three minutes after the Bluetooth connection is closed or lost.

The indicator light is built into the On/Off button.

Off: The Bluetooth GPS Receiver power is off.

Single ﬂash every 1.5 seconds: The Bluetooth GPS Receiver is connected

to the PDA via Bluetooth.

Double

connected to the PDA via Bluetooth.

Light is

If the vehicle power adapter is plugged in, the Bluetooth GPS Receiver will use the external power supply instead of the internal batteries.

Note:

: Press for two seconds and release.

ﬂash every 1.5 seconds: The Bluetooth GPS Receiver is not

blue: Battery voltage is good.

red: Battery voltage is low. Change the batteries.

The external power adapter does not charge the internal batteries.

+ 9 hidden pages