Multi-function
Eight Channel
Cooking Timer
Product Description
The TNC-T9020 programmable multi-function eight channel cooking/holding timer offers direct menu choice, using the operate button, that allows eight products to be timed at the same time. Can store up to 50 menu items in the timer. It can contain the entire menu for food items along with all operations required to properly prepare each menu item.
The menu items are displayed on a large easy-to-ready alpha-numeric display along with operating prompts and operation times. Menu items, operation messages, operation times and other parameters are stored on an EPROM (menu memory chip). These chips are field replaceable, making menu additions and deletions easy to change. Any memory changes made are maintained in non-volatile memory, and therefore, are unaffected by power interruptions.
Custom menu and operation software are available. Consult factory for more information.
Multi-function Food Product Timers
Model TNC-T9020 Features
///Pre-set cooking times and functions for all food products.
///Audio and visual alert signals with flashing display messages and six selectable volume levels.
///One large, easy-to-read, 16-character dot matrix display.
///On/off switch.
///MODE/TIME touchpad button to review operate or program modes and recovery time.
///Eight touch pad multi-functional buttons that control all functions in operate or program modes.
///Red LEDs above each multi-functional button show which operate or program mode is being performed.
///Multi-channel operation.
///Field-programmable time parameters.
///Remove function preand post-alerts.
///Push-button review of all cooking parameters.
///Self-test mode function.
///Field menu expansion through chip replacement.
///Easily readjusts to factory pre-set parameters.
///Microprocessor-based electronics with power failure protection of memory.
///Heavy-duty stainless-steel construction.
National Controls Corporation
1725 Western Drive • West Chicago, Illinois 60185
Toll Free: 1-800-323-2593 • Direct: 630-231-5900 • Fax: 630-231-1377 E-mail: ncc@nationalcontrols.com • Web site: www.nationalcontrols.com
© 2008, by AMETEK, Inc. All rights reserved. PDF (240023)
Loading...