Napoleon NEFL50CHS, NEFL42CHS, NEFL60CHS, NEFL60CHD Specifications
ALLURAVISION™ SERIES ELECTRIC FIREPLACE
C
D
E
H
CORD LOCATION
CORD LOCATION
FRONT VIEW RIGHT SIDE VIEW TOP VIEW
E
H
CORD LOCATION
Specifications
Model BTU
NEFL32CHD 5000 32 5/8 33 1/8 15 7/8 16 1/8 5 13/16 6 1/16 30 13/16 x 11 1/16
NEFL42CHD 5000 42 1/16 42 9/16 15 7/8 16 1/8 5 13/16 6 1/16 40 1/4 x 11 1/16
NEFL50CHD 5000 50 5/16 50 13/16 15 7/8 16 1/8 5 13/16 6 1/16 48 1/2 x 11 1/16
NEFL60CHD 5000 60 3/16 60 11/16 15 7/8 16 1/8 5 13/16 6 1/16 58 5/16 x 11 1/16
NEFL74CHD 5000 74 5/16 74 13/16 15 7/8 16 1/8 5 13/16 6 1/16 72 1/2 x 11 1/16
NEFL100CHD 5000 100 5/16 100 13/16 15 7/8 16 1/8 5 13/16 6 1/16 98 1/2 x 11 1/16
NEFL32CHS 5000 32 5/8 33 1/8 15 7/8 16 1/8 4 1/4 4 1/2 30 13/16 x 11 1/16
NEFL42CHS 5000 42 1/16 42 9/16 15 7/8 16 1/8 4 1/4 4 1/2 40 1/4 x 11 1/16
NEFL50CHS 5000 50 5/16 50 13/16 15 7/8 16 1/8 4 1/4 4 1/2 48 1/2 x 11 1/16
NEFL60CHS 5000 60 3/16 60 11/16 15 7/8 16 1/8 4 1/4 4 1/2 58 5/16 x 11 1/16
NEFL74CHS 5000 74 5/16 74 13/16 15 7/8 16 1/8 4 1/4 4 1/2 72 1/2 x 11 1/16
NEFL100CHS 5000 100 5/16 100 13/16 15 7/8 16 1/8 4 1/4 4 1/2 98 1/2 x 11 1/16
Width Height Depth
Actual Framing Actual Framing Actual Framing
Viewing Area
Product information provided is not complete and is subject to change without notice. Please consult the installation manual for
the most up to date installation information.
A
F
VIEWING AREA
G
B
E
H
CORD LOCATION
Dimensions
Model No. A B C D E F G H
35"
35"
17 5/16”
(44cm)
17 5/16”
(44cm)
17 5/16”
(44cm)
17 5/16”
(44cm)
17 5/16”
(44cm)
17 5/16”
(44cm)
17 5/16”
(44cm)
17 5/16”
(44cm)
17 5/16”
(44cm)
17 5/16”
(44cm)
17 5/16”
(44cm)
17 5/16”
(44cm)
NEFL32CHS
NEFL42CHS
NEFL50CHS
NEFL60CHS
NEFL74CHS
NEFL100CHS
NEFL32CHD
NEFL42CHD
NEFL50CHD
NEFL60CHD
NEFL74CHD
NEFL100CHD
(88.8cm)
44 7/16”
(112.8cm)
52 11/16”
(133.8cm)
62 9/16”
(158.8cm)
76 3/4”
(194.8cm)
102 11/16”
(260.8cm)
(88.8cm)
44 7/16”
(112.8cm)
52 11/16”
(133.8cm)
62 9/16”
(158.8cm)
76 3/4”
(194.8cm)
102 11/16”
(260.8cm)
4 1/4”
(10.8cm)
4 1/4”
(10.8cm)
4 1/4”
(10.8cm)
4 1/4”
(10.8cm)
4 1/4”
(10.8cm)
4 1/4”
(10.8cm)
5 13/16”
(14.8cm)
5 13/16”
(14.8cm)
5 13/16”
(14.8cm)
5 13/16”
(14.8cm)
5 13/16”
(14.8cm)
5 13/16”
(14.8cm)
15 7/8”
(40.2cm)
15 7/8”
(40.2cm)
15 7/8”
(40.2cm)
15 7/8”
(40.2cm)
15 7/8”
(40.2cm)
15 7/8”
(40.2cm)
15 7/8”
(40.2cm)
15 7/8”
(40.2cm)
15 7/8”
(40.2cm)
15 7/8”
(40.2cm)
15 7/8”
(40.2cm)
15 7/8”
(40.2cm)
24 Napoleon Road, Barrie, Ontario, Canada L4M 0G8 • 214 Bayview Drive, Barrie, Ontario, Canada L4N 4Y8
Fireplaces, Heating and Cooling: 705-721-1212 • Grills: 705 726-4278 • napoleonproducts.com
32 5/8”
30 13/16”
(82.8cm)
42 1/16”
(106.8cm)
(127.8cm)
(152.8cm)
(188.8cm)
100 5/16”
(254.8cm)
(106.8cm)
(127.8cm)
(152.8cm)
(188.8cm)
100 5/16”
(254.8cm)
50 5/16”
60 3/16”
74 5/16”
32 5/8”
(82.8cm)
42 1/16”
50 5/16”
60 3/16”
74 5/16”
(102.2cm)
(123.2cm)
(148.2cm)
(184.2cm)
(250.2cm)
30 13/16”
(102.2cm)
(123.2cm)
(148.2cm)
(184.2cm)
(250.2cm)
(78.2cm)
40 1/4”
48 1/2”
58 5/16”
72 1/2”
98 1/2”
(78.2cm)
40 1/4”
48 1/2”
58 5/16”
72 1/2”
98 1/2”
11 1/16”
(28.1cm)
11 1/16”
(28.1cm)
11 1/16”
(28.1cm)
11 1/16”
(28.1cm)
11 1/16”
(28.1cm)
11 1/16”
(28.1cm)
11 1/16”
(28.1cm)
11 1/16”
(28.1cm)
11 1/16”
(28.1cm)
11 1/16”
(28.1cm)
11 1/16”
(28.1cm)
11 1/16”
(28.1cm)
C
D
3/4”
(1.8cm)
3/4”
(1.8cm)
3/4”
(1.8cm)
3/4”
(1.8cm)
3/4”
(1.8cm)
3/4”
(1.8cm)
3/4”
(1.8cm)
3/4”
(1.8cm)
3/4”
(1.8cm)
3/4”
(1.8cm)
3/4”
(1.8cm)
3/4”
(1.8cm)
DATE 03/2018
ALLURAVISION™ SERIES ELECTRIC FIREPLACE
Side View (Wall Mount)
8" (203mm)
Mantel
Floor
Wall
0"
Mantel
MIN
MAX
Clearances
Minimum Mantel Clearances
!
WARNING
• When using paint or lacquer to finish the mantel, the paint or lacquer must be heat
resistant to prevent discolouration.
Framing
Measurements from body of appliance:
Sides, Back, Top
FINISHING MATERIAL
0”
8" (203mm)
0"
Floor
Side View (recessed into a wall)
Appliance Installation
Side Panel Installation (Wall Mount Installation Only)
1. Install left and right panels (FIG. 1) by securing 4 fasteners (2 per panel) to bottom of appliance
(FIG. 2).
A
B
0"
(NON-LOAD
BEARING)
NEFL32CHS
NEFL42CHS
NEFL50CHS
NEFL60CHS
NEFL72CHS
NEFL100CHS
4 1/2”
4 1/2"
89mm
[89mm]
minimum for CHS
models
Model No. A B
16 1/8”
(41cm)
16 1/8”
(41cm)
16 1/8”
(41cm)
16 1/8”
(41cm)
16 1/8”
(41cm)
16 1/8”
(41cm)
6 1/16"
152mm
6 1/16”
[152mm]
minimum for CHD
models
33 1/8”
(84.1cm)
42 9/16”
(108.1cm)
50 13/16”
(129.1cm)
60 11/16”
(154.1cm)
74 13/16”
(190cm)
100 13/16”
(256.1cm)
A
B
JUNCTION BOX
Model No. A B
NEFL32CHD
NEFL42CHD
NEFL50CHD
NEFL60CHD
NEFL72CHD
NEFL100CHD
16 1/8”
(41cm)
16 1/8”
(41cm)
16 1/8”
(41cm)
16 1/8”
(41cm)
16 1/8”
(41cm)
16 1/8”
(41cm)
33 1/8”
(84.1cm)
42 9/16”
(108.1cm)
50 13/16”
(129.1cm)
60 11/16”
(154.1cm)
74 13/16”
(190cm)
100 13/16”
(256.1cm)
Recessing the Appliance into the Wall
Due to the many different materials used on different walls, it is highly recommended that you consult
your local builder before you install this appliance on the wall.
Select a location that is not prone to moisture and is located at least 36” (91.4cm) away from
combustible materials such curtain drapes, furniture, bedding, paper etc.
1. Measure the appliance and create a rough in with electrical. The electrical junction box is
2. Remove the front glass (see “front glass installation and removal” section in your manual).
3. Remove the plastic panel holders by removing the screws (FIG. 1 and 2).
4. If side covers are installed prior to recessed installation, remove the side covers by removing
FIG. 1
located on the left side of the appliance.
FIG. 1
the screws (FIG. 3 and 4).
FIG. 3
FIG. 2
5. Install trims (see “trim installation” section in your manual).
6. Hold the appliance up to ensure it will fit into the framing (see “framing - recessed
installation” section in your manual).
7. Apply shims (not supplied) between the appliance and the frame.
8. Use 4 screws to secure the appliance into the wall (FIG. 5). Do not overtighten screws.
9. Re-install the plastic panel holders.
10. Place the crystals or optional topaz glass chips and drift wood logs (CHD models only)
along the media tray (see “crystal ember installation” and “optional topaz glass chips and
drift wood log installation” sections in your manual).
11. Install front glass (see “front glass installation and removal” section in your manual).
note:
2 sets of holes are provided for recessing into the wall. The wall structure may limit how far
FIG. 2
the appliance can be recessed. Use the appropriate set of holes when recessing to the frame.
Apply shims (not supplied) between appliance and frame.
It is recommended that the walls of the appliance enclosure be finishing (i.e. drywall) to avoid
exposed insulation or vapour barrier coming in contact with the appliance. This will ensure
clearance to combustibles is maintained.
24 Napoleon Road, Barrie, Ontario, Canada L4M 0G8 • 214 Bayview Drive, Barrie, Ontario, Canada L4N 4Y8
Fireplaces, Heating and Cooling: 705-721-1212 • Grills: 705 726-4278 • napoleonproducts.com
FIG. 4
FIG. 5
Date 03/2018
Loading...