NAPCO NP-CC24AC16UL User Manual

R

333 Bayview Avenue

Amityville, New York 11701
For Sales and Repairs, [phone]
For Technical Service, [phone]

© NAPCO 2005

16 CAMERA 24VAC POWER SUPPLY

DESCRIPTION

The NP-CC24AC16UL provides 24VAC via distribu­tion to 16 fused outputs for a total of 8.0A continu­ous supply current. The NP-CC24AC16UL is a dis­tribution module and a CCTV power supply. It is de­signed with 16 individually fused outputs for power­ing video devices such as CCTV cameras and other
accessories.

FEATURES

• Input 115VAC 50/60 HZ 1.8 Amps

• 8 Amps 200VA supply current

• Listed (UL 2044)

• Sixteen 24VAC individually fused outputs

• Output fuses are rated at 3 Amps

• Main fuse is rated at 5 Amps

• Surge protected outputs

• AC power LED indicator

• Individual LED’s for each output

• Power ON/OFF switch

• Spare fuses included

• Unit maintains camera synchronization

• Ease of installation saves time and eliminates

costly labor

INSTALLATION INSTRUCTIONS

1. Mount the NP-CC24AC16UL in desired location

and secure

2. Slide switch to OFF position

3. Connect the AC 115VAC 50/60Hz to the black

and white flying leads of the transformer Con­nect the green to an earth ground

4. Connect each camera to output terminals 1 to 8

marked 1 to 8 (+ & -) on Circuit board I and the
same on circuit board II

5. Slide switch to ON position

6. Green and red LED's will illuminate when AC

power is present

7. Upon completion of wiring secure enclosure

WARNING:
To reduce the risk of electric shock, do not ex­pose this product to rain or moisture. For con­tinuous protection against hazard, replace only
with same type and rating of fuse.

NP-CC24AC16UL

WI1336A 12/05

Enclosure Dimensions

APPENDIX LIST

Item Description Dimension Volume Memo

1 Instruction Sheet A4 1
2 Wire 18AWG 28cm 2 Black
3 Wire 18AWG 28cm 2 White
4 Wire 18AWG 28cm 2 Blue
5 Wire 18AWG 28cm 2 Yellow
6 AC CORE 180cm 1
7 Linear Transformer 110VAC/24VAC 100VA 2