NAPCO iSeeVideo ISV WLHDCAM Installation Manual

R

333 Bayview Avenue

Amityville, New York 11701

For Sales and Repairs, [phone]

For Technical Service, [phone]

Publicly traded on NASDAQ S ymbol: NSSC

© NAPCO 2012

NAPCO iSeeVideo

ISV WLHDCAM

Installation Guide

WI1973 010/12

Indoor 720P HD Wireless IP Camera

ISV WAP

Internet

ISV WLHDCAM

Internet

VideoAlert.net SERVER

Designed exclusively for use with NAPCO iSeeVideo VideoAlert.net Server

COMPATIBLE

1

ISV WLHDCAM Specifications:

• Resolution: 720P HD (1280 x 720) at up to 30 Frames-per-

second

• CMOS, 1/4” HD Resolution Image Sensor

• Lens: Fixed Focus Lens, Aperture: F2.0, Diagonal View Angle:

66° (Horizontal=57.8°, Vertical=37.8°

• Image Control AWB, AGC, Sharpness, Brightness

• (4) Programmable Pixel Based Analytic Motion Detection Zones

• Compression: H.264, MPEG-4

• Wireless Protocol: 802.11n

• Wireless Encryption: 128 Bit WPA

• Connectors: Ethernet RJ-45, DC Power, Reset

• Power Adapter: 12VDC/1A, 100/240 VAC Input

• Dimensions (HxWxD) 90 x 62 x 35 mm (3.6” x 2.4” x 1.4”)

• Weight 115g (0.25lb.) w/o stand, 150g (0.33lb.) w/stand

• Certification CE/FCC

• Operating Temperature: 0° to 45°C (32° to 113°F)

• IR Night vision LEDs: 8, 1 Light Sensor

• IR Night vision Range: 40’ (12m)

• PIR Motion Sensor Range: 25’ (7.6m) with a viewing angle of

85° when installed at a height of 8’ (2.4m)

• Dual Technology Motion Detection Option, PIR and Pixel based

trips required for event triggering. (Pats Pending)

• PIR Motion Detection Pattern:

TOP VIEW

SIDE VIEW

ORDERING INFORMATION

ISVWLKIT1 Fixed IP WL Camera Kit

(1)ISVWLCAM, fixed IP wireless camera, mounting bracket,

Suction Cup Window Bracket, Power Adapter with 15’ cable
(1)ISVWAP, WL Access Point, CAT5 cable, Power Adapter.
12 months iSeeVideo network service

ISVWLCAM Additional Fixed IP WL Camera

(1)ISVWLCAM, fixed IP wireless camera, mounting bracket,

Suction Cup Window Bracket, Power Adapter with 15’ cable
12 months iSeeVideo network service

ISVWLPTKIT2 Pan/Tilt IP Camera Kit

(1)ISVWLCAMPT, pan/tilt IP wireless camera, mounting

bracket, Power Adapter with 15’ cable
(1)ISVWAP, WL Access Point, CAT5 cable, Power Adapter.
12 months iSeeVideo network service

ISVWLPTCAM Additional Pan/Tilt IP Camera

(1)ISVWLCAMPT, mounting bracket, 15’ CAT5 cable, Power

Adapter with 15’ cable
12 months iSeeVideo network service

ISVWLOKIT3 One Outdoor IR IP Camera Kit

(1)ISVWLOCAM, Outdoor IR wireless IP camera, mounting

bracket, Power Adapter with 15’ cable
(1)ISVWAP, WL Access Point, CAT5 cable, Power Adapter.
12 months iSeeVideo network service

ISVWLOCAM Additional Outdoor IR IP Camera

(1)ISVWLOCAM, Outdoor IR wireless IP camera, mounting

bracket, Power Adapter with 15’ cable
12 months iSeeVideo network service

ISVWLHDKIT3 One HD Indoor HD IR IP Camera Kit

(1)ISVWLHDCAM, Indoor HD wireless IP camera, mounting

bracket, Power Adapter with 15’ cable
(1)ISVWAP, WL Access Point, CAT5 cable, Power Adapter.
12 months iSeeVideo network service

ISVWLHDCAM Additional Indoor HD IR IP Camera

(1)ISVWLHDCAM, Indoor HD wireless IP camera, mounting

bracket, Power Adapter with 15’ cable
12 months iSeeVideo network service

8ft

85°

15ft

Table of Contents

Features and specifications ..............................2

System Overview ...............................................3

Configuring the wireless connection ..................4

Securing the wireless connection ......................4

Account Activation.............................................. 6

Adding Cameras to an Existing Account............8

Configuring Motion Detection........................... 10

Advanced Settings ...........................................11

Setting a Motion Schedule ...............................11

Viewing Stored Video....................................... 11

NAPCO Limited Warranty ................................12

2

15ft

Mobile Application Support:

iPhone, iTouch and iPad
Android™ OS 1.6 or newer
BlackBerry™

Pearl*
Curve*
Curve World Edition*
Bold
Tour
Storm
Storm 2
Torch

*OS ver. 4.6 or
newer required

NAPCO Security Systems, Inc.

For Sales and Repair, call toll free: [phone]

For direct line to Technical Service,

call toll free: [phone]

Internet: http://www.napcosecurity.com

Windows ®, and the Windows logo are registered trademarks of Microsoft Corporation
Apple ® and the Apple logo are registered trademarks of Apple Computer, Inc.
Linux ® is a trademark of Linus Torvalds. The Linux penguin logo was created by Larry Ewing

.

Overview of the iSeeVideo System

The NAPCO iSeeVideo system allows remote video internet monitoring of
homes and businesses through a unique subscription based account system
that provides the opportunity to realize recurring revenue from residential and
commercial video installations. The system is comprised of the following
components:

The ISV WLHDCAM high quality 720P HD wireless indoor IP video camera
provides video at 1280 x 720 pixels that can be viewed through the iSeeVideo
server on virtually any computer in the world at 20 frames per second (typical).
The ISV WLHDCAM also provides a PIR motion sensor that when activated will
prompt the transmission of video clips to the iSeeVideo server. It also features
IR LED illumination for night vision applications. The ISV WLHDCAM provides
(at no additional service charge) dynamic IP support through the iSeeVideo DNS

network - keeping constant track of the broadband modem’s IP address
changes, ensuring that the DHCP IP address is always kept current.

ISVWAP

ISV WLHDCAM

The ISV WAP Wireless Access Point allows the simple instant configuration of
the wireless iSeeVideo camera, without confusing or intrusive multi-step
enrollment procedures (patents pending).

The installation procedure for the WAP and cameras is actually not a procedure
at all; simply plug the WAP into the customer’s network (router) and power up
the cameras. At this point, all of the cameras are fully operational and can be
viewed through the iSeeVideo portal, protected by the default iSeeVideo 128bit
encryption. Once all cameras are up and running, simply click the LOCK icon on
the portal to prompt the camera to send a new, unique, random 128bit encrypted
secure key to the WAP, ensuring the best possible wireless security.

This is unlike competitive installation procedures, which involve confusing
multiple steps with specific precision timing, or in some cases force the installer
to use the customer’s personal computer to “discover” the cameras and
download “plug-ins” through the computer in order to enroll a required gateway.

The iSeeVideo system was designed to avoid all of these obvious complications
and privacy concerns. The customer’s personal property should never be used
as an installation tool, especially when the computer contains the customer’s
personal data including communications, pictures and banking.

The NAPCO iSeeVideo server maintains video accounts and allows
subscribers to view their iSeeVideo cameras from any personal computer, web
enabled cell phone or mobile device. It is compatible with computers running
the Microsoft Windows ®, Apple ® and Linux ® operating systems and is also
compatible with any web enabled cell phone or mobile video device. The server
also automatically notifies the subscriber by email upon receipt of triggered
video events and archives them for viewing at a later time. Each subscriber
account provides 50Mb of storage, allowing the archiving of about (50-60) 10
second video clips (adjustable 5 sec pre-alarm and 5 sec post-alarm). The
server is designed to allow the customer to have complete control of their
account in regard to passwords, email addresses and other personal
information.

Customer's
Broadband

Modem

Internet

VideoAlert.net

Server

Internet

3

Controls and Indicators

Light

Sensor

L

ens

PIR Motion

Sensor

Front View

RJ45 for

E

thernet

P

rivacy

B

utton

DC Power

One

D/I and

Rear View

One

D/O

WPS B

utt

Reset B

Power LED

Netw

ork LED

on (not used)

utton

Input/output

Terminals

LED INDICATION TABLE

POWER
LED

NETWORK
LED

DI is a N/O input (activates
upon short of DI to GND)

DO is an open collector output
that must be connected to a low
current relay or directly to an
EOLR terminal on an alarm
panel zone input.

STEADY Camera has power

BLINKING

STEADY

BLINKING

Camera initializing, trying to
obtain an IP address

OFF No power

Network connection good,
not transmitting or receiving

Camera transmitting or
receiving data

OFF No network connection

1 CONFIGURE THE NETWORK CONNECTION

CUSTOMER'S

BROADBAND

CONNECTION

(MODEM OR

NETWORK)

CUSTOMER'S

ROUTER

WAN

WAN

4 3 2 1

RESET

WAN 4 3 2 1 12V/1A

ISVWAP

ISVWAP REAR PORTS (DO NOT USE WAN PORT)

⇒

Make the connections above and plug in the ISVWAP power adaptor

⇒ Attach the antennas to the camera(s)
⇒ Plug in the camera power adaptor

There are no other steps required to deploy the cameras through the customer’s network; the cameras will automatically begin
communicating to the iSeeVideo server system.

Create the new iSeeVideo account and register the cameras as shown on page 5.

Secure the iSeeVideo Wireless network

Once all cameras have been registered to the new account and can be viewed,
the wireless network must be secured.

⇒ While viewing each camera, simply click Secure Now! next to the unlock

Icon and the camera will send a new, unique 128bit encrypted secure
key to the Wireless Access Point, providing a secure wireless connec­tion.

CUSTOMER’S PC

POWER

ISVWLCAMPT

ISVWLCAM

ISVWLOCAM

ISVWLHDCAM

⇒ You will be automatically logged out of the account; log back in to view

the secured camera to ensure that the unlock icon has change to a
locked state.

⇒ Repeat for each camera in the system.

If a new camera is added to the system in the future, simply repeat the above
procedure to secure it.

4