Napco CICP1800T DATASHEET

TURBO SUPERTERM 8
SUPERTERM-8
CICP1800T 8-Door Intelligent Controller
In addition to memory and power expansion capabilities, the Turbo Superterm will accept up to 3 input/output expansion boards. The Turbo Superterm can be ordered with the expansion boards pre-installed at the factory. The boards can also be ordered separately and field installed within the Turbo Superterm enclosure. The boards are mounted to the inside of the hinged enclosure cover. The Alarm Expander Board provides 16 supervised inputs while the Relay Expander Board provides 16
The eight-reader Turbo Superterm (CICP1800T) supports 8 readers and has 24 inputs, 1 tamper alarm and 17 outputs. A locking steel enclosure, power supply and battery are included.
Turbo Superterm-8 is an expandable intelligent controller capable of supporting all access control functions for one to eight doors. This distributed processor-based panel will operate as a standalone unit in the event server-communications are interrupted. The Turbo Superterm is programmed via Continental
®
Instruments (CIC) CardAccess
software program, a Windows­based access control and security management solution. Once programmed, the controller does not require continuous server communications, as it automatically stores system transactions in its internal memory. The Turbo Superterm’s memory is field expandable, allowing for greater cardholder populations and/or a larger transaction buffer. The controller’s Flash EPROM firmware is easily upgraded when additional features or system enhancements are required. Continental’s controllers feature extensive multi-stage lightning/transient protection on-board for maximum reliability even in harsh environments.
The Turbo Superterm accepts industry standard Wiegand output devices and supports virtually all card/reader technologies. Proximity, Biometric, Magnetic Stripe, Barcode, Wiegand, Barium Ferrite, Keypad and Smart Readers are easily connected and controlled. The Turbo Superterm can store multiple card (bit) formats in its internal memory, making it a cost-effective retrofit panel. Supporting multiple bit formats allows existing card populations and readers to remain in place.
relay outputs and 8 unsupervised inputs.
Turbo Superterm-8 Capacities
Cards 40,000 standard (exp. to 210,000)
Readers (5-wire) 8 (Wiegand output)
Keypads (5-wire) 8 (Wiegand output)
Keypads (7-wire) 8 X-Y Matrix type
Readers w/Keypad
Standard Inputs
Expanded Inputs
Standard Outputs
Expanded Outputs
Transaction Buffer
Time Schedules 128
Access Groups 1000
Holidays 50
Reader Power 800mA@5VDC, 500mA@12VDC
Battery Backup 4-6 hours included
Enclosure Size 21.5”H x 21.25”W x 7”D, 48lbs.
UL Listings Optional UL294, UL1076, CE
8 5-wire Readers with 8 or 4 X-Y Matrix Keypads
24 (Supervised)
48 Additional inputs (Supervised)
17 Form C rated at 3A@24VDC/VAC
48 Additional Form C rated at 3A@24VDC/VAC
1000 Standard (exp. to 250,000)
®
server for maximum
Continental Instruments, A Napco Security Group Company 355 Bayview Ave., Amityville, NY 11701
(631) 842-9400 FAX (631) 842-9135 www.cicaccess.com GSA GS-07F-00039H
A standard on-board power supply provides 800mA @5VDC or 500mA @12VDC for reader power. An additional 3A@12VDC is available with the optional expanded power supply. The Turbo Superterm can be ordered with a factory installed expanded power supply. The expanded power supply can also be ordered separately and field installed within the Turbo Superterm enclosure. The expanded power supply includes a 12AH standby battery, an upgrade to the standard 7AH battery. The standard 7AH and expanded 12AH batteries provide 4–6 hours standby. In addition to the rechargeable standby battery, each Turbo Superterm includes a lithium battery for up to one year of data protection.
UL294 (Access Control System Unit), UL1076 (Proprietary
Burglar Alarm Unit) listings and CE are optional with the
Turbo Superterm-8.
Typical Door Configuration
See Continental Instruments Configuration Guide for additional detailed system wiring information.
Turbo Superterm-8 Components
QTY. Part No. Description
1
1
1
1 Optional
2 Optional
Up to 3 Optional*
Up to 3 Optional*
Note: *A maximum of 3 Expansion Boards in any combination may be added to the Turbo Super­term enclosure.
CICP1800T
or
CICP1800TEXP
Standard 14VAC Power Supply via step-
Standard 7AH Battery Backup included.
CICEXPPWS 12V Linear Expanded Power
CICP1800MB2X2 Memory Board - 2MB per memory
CICP1800RB Relay Expander Board - 16 output
CICP1800AB Alarm Expander Board - 16 alarm
Eight (8) reader controller with stan­dard 40,000 card capacity, 24 supervised alarm inputs, tamper alarm, and 17 relay outputs. Unit ships complete in a locked steel enclosure including a 7AH standby battery for memory and system operation.
Same as above, with expanded power supply. Required if more than one Relay Expander Board (CICP1800TRB) is used or additional 12VDC is needed. A 12AH Battery is included.
down transformer mounted inside enclosure. 10’ power line cable with 110VAC plug is included.
Supply provides 3A @ 12VDC Auxiliary Power. 12AH Battery is included.
board (up to 210,000 cards w/4 MB of memory expansion).
relays, 8 alarm inputs (Unsupervised).
inputs (Supervised). UL Listed.
CICP1800T Eight-Door Intelligent Controller
Continental Instrument’s Controllers can connect to the CardAccess Server via hardwire (shown below), LAN/WAN dial-up modem or fiber optics. See the CIC Configuration Guide for additional detailed system information.
Continental Instruments, A Napco Security Group Company 355 Bayview Ave., Amityville, NY 11701
(631) 842-9400 FAX (631) 842-9135 www.cicaccess.com GSA GS-07F-00039H
CardAccess® and CI SQL 3000™ are trademarks of Continental/NAPCO. © Continental Instruments/NAPCO, 2003.
A480
Loading...