Napco CICP1800 DATASHEET

SUPERTERM-8

CICP1800 8-Door Intelligent Controller

Up to 63 CIC Intelligent Controllers (Microterm, Miniterm,
Smarterm or Superterm) can be intermixed on the same
communications network. Multiple communication networks
(ports) can be connected to the CardAccess® server for maximum
system expansion. Controller communication choices include:
hardwire (repeat or multi-drop mode), LAN/WAN, dial-up or
fiber optics for maximum flexibility. Continental Instruments
supports RS232, RS422 and RS485 communication formats for
optimal system configuration.

In addition to memory and power expansion capabilities, the
Superterm will accept up to 3 input/output expansion boards.
The Superterm can be ordered with the expansion boards pre­installed at the factory. The boards can also be ordered separately
and field installed within the Superterm enclosure. The boards
are mounted to the inside of the hinged enclosure cover. The
Alarm Expander Board provides 16 supervised inputs while
the Relay Expander Board provides 16 relay outputs and 8

The eight-reader Superterm (CICP1800) supports
8 readers and has 24 inputs, 1 tamper alarm and 17
outputs. A locking steel enclosure, power supply and
battery are included.

Superterm-8 is an expandable intelligent controller capable
of supporting all access control functions for one to eight
doors. This distributed processor-based panel will operate
as a standalone unit in the event server-communications are
interrupted. The Superterm is programmed via Continental
Instruments (CIC) CardAccess® software program, a Windows­based access control and security management solution. Once
programmed, the controller does not require continuous server
communications, as it automatically stores system transactions
in its internal memory. The Superterm’s memory is field
expandable, allowing for greater cardholder populations and/
or a larger transaction buffer. The controller’s Flash EPROM
firmware is easily upgraded when additional features or
system enhancements are required. Continental’s controllers
feature extensive multi-stage lightning/transient protection
on-board for maximum reliability even in harsh environments.

The Superterm accepts industry standard Wiegand output devices
and supports virtually all card/reader technologies. Proximity,
Biometric, Magnetic Stripe, Barcode, Wiegand, Barium Ferrite,
Keypad and Smart Readers are easily connected and controlled.
The Superterm can store multiple card (bit) formats in its internal
memory, making it a cost-effective retrofit panel. Supporting
multiple bit formats allows existing card populations and readers
to remain in place.

unsupervised inputs.

Cards 20,000 standard (exp. to 145,000)

Readers (5-wire) 8 (Wiegand output)

Keypads (5-wire) 8 (Wiegand output)

Keypads (7-wire) 8 X-Y Matrix type

Readers
w/Keypad

Standard
Inputs

Expanded
Inputs

Standard
Outputs

Expanded
Outputs

Transaction
Buffer

Time Schedules 128

Access Groups 1000

Holidays 50

Reader Power 800mA@5VDC, 500mA@12VDC

Battery Backup 4-6 hours included

Enclosure Size 21.5”H x 21.25”W x 7”D, 48lbs.

UL Listings UL294, UL1076, UL1950**

**UL1950 replaced with EN60950 in Q2/2003

Superterm-8 Capacities

8 5-wire Readers with 8 or 4 X-Y Matrix Keypads

24 (Supervised)

48 Additional inputs (Supervised)

17 Form C rated at 3A@24VDC/VAC

48 Additional Form C rated at 3A@24VDC/VAC

1000 Standard (exp. to 30,000)

Continental Instruments, A Napco Security Group Company • 355 Bayview Ave., Amityville, NY 11701

[phone] • FAX [phone] www.cicaccess.com GSA GS-07F-00039H

A standard on-board power supply provides 800mA @5VDC

t

C

u

Door Lock

G

G

C

3000

abase and

C

s

S

r

CICE1940

1

r

2

Required if server is not located

0

k

000

p

.

p

p

2

000'

2

000'

2

000'

2

000'

2

32

50'

i

m

Sm

or 500mA @12VDC for reader power. An additional
3A@12VDC is available with the optional expanded power
supply. The Superterm can be ordered with a factory installed
expanded power supply. The expanded power supply can also
be ordered separately and field installed within the Superterm
enclosure. The expanded power supply includes a 12AH
standby battery, an upgrade to the standard 7AH battery. The
standard 7AH and expanded 12AH batteries provide 4–6 hours
standby. In addition to the rechargeable standby battery, each
Superterm includes a lithium battery for up to one year of data
protection.

The Superterm-8 is UL Listed for UL294 (Access Control
System Unit), UL1076 (Proprietary Burglar Alarm Unit) and
UL1950** (Information Technology Equipment).

Typical Door Configuration

See Continental Instruments Configuration Guide for
additional detailed system wiring information.

A or B

RS422 to Panels

Door Lock

G

Door Contact

Power Supply

Continental

Instruments llc

G

Request

to Exit

Electric

H

Door Strike

NOTE: Request to Exit motion detectors will require

an additional 12VDC power cable. Exit devices are
typically mounted on the egress side of door.

ard Reader

G

Request

to Exit
B

Request to Exi

Motion Detector

Door Contact

G

Superterm-8 Components

QTY. Part No. Description

1

CICP1800

or

CICP1800EXP

1

1

1 Optional

1 Optional

Up to 3

Standard 14VAC Power Supply via step-

Standard 7AH Battery Backup included.

CICEXPPWS 12V Linear Expanded Power

CICP1800MB2-1 Memory Board - 2MB (up to 145,000

CICP1800RB Relay Expander Board - 16 output

Optional*

Up to 3

CICP1800AB Alarm Expander Board - 16 alarm

Optional*

Note: *A maximum of 3 Expansion Boards in any combination may be added to the Superterm
enclosure.

CICP1800 Eight-Door Intelligent Controller

Continental Instrument’s Controllers can connect to the
CardAccess Server via hardwire (shown below), LAN/WAN
dial-up modem or fiber optics. See the CIC Configuration
Guide for additional detailed system information.

Eight (8) reader controller with stan­dard 20,000 card capacity, 24
supervised alarm inputs, tamper
alarm, and 17 relay outputs. Unit ships
complete in a locked steel enclosure
including a 7AH standby battery for
memory and system operation.

Same as above, with expanded power
supply. Required if more than one Re­lay Expander Board (CICP1800RB) is
used or additional 12VDC is needed. A
12AH Battery is included.

down transformer mounted inside
enclosure. 10’ power line cable with
110VAC plug is included.

Supply provides 3A @ 12VDC
Auxiliary Power. 12AH Battery is
included.

cardholders).

relays, 8 alarm inputs (Unsupervised).

inputs (Supervised). UL Listed.

RS422 Repeat Mode Communications Networ

4

' max. distance between controllers.

to 63 controllers on a Repeat Mode Network

U

RS42

Max. 4

ertermSu

RS42

Max. 4

arter

RS42

nitermM

ardAccess

Dat
ommunication

erve

Polling Line Converte

RS232 to RS42

within 5

RS2

Max.

PL-

RS42

Max. 4

ertermSu

42

. 4

Continental Instruments, A Napco Security Group Company • 355 Bayview Ave., Amityville, NY 11701

[phone] • FAX [phone] www.cicaccess.com GSA GS-07F-00039H

CardAccess® and CI SQL 3000™ are trademarks of Continental/NAPCO. © Continental Instruments/NAPCO, 2003.

A434A