Nady Systems SCM900, SCM 910, SCM920 User Manual

4 (1)
Nady Systems SCM900, SCM 910, SCM920 User Manual

NADY SCM SERIES

USER GUIDE

SCM 900/910/920 Studio Condenser Microphones

Congratulations on purchasing a Nady SCM Series FET Condenser Microphone. These superior microphones are perfect for recording studio vocals, acoustic instruments, orchestras and choral groups, ambient instrument audio, and many live sound applications. Powerful and versatile, the SCM Series microphones meet the stringent requirements of even the most demanding digital recording and live broadcasting applications.

SCM 900

SCM 910

SCM 920

This manual covers the operation of the SCM 900/910/920 microphones and the available optional accessories.

To take full advantage of the superb features of your microphone, and to enjoy long and trouble-free use, please read this user's guide carefully. Since these 3 models, the SCM 900, the SCM 910 and the SCM 920 share most

features, this guide will refer to all three collectively as the SCM Series, and their differences will be noted as applicable.

UNPACKING, INSPECTION, STORAGE AND TRANSPORT

Your SCM Series microphone was carefully packed at the factory, and the shipping carton (or carrying case) was designed to protect the unit during shipping. Please retain this container for subsequent transport and in the highly unlikely event that you ever need to return your microphone for servicing. The optional SMCC-2 aluminum carrying case is highly recommended for the most convenient and safe transport or permanent storage. It has roomy compartments for your SCM Series microphone and all available accessories, plus XLR cables.

STANDARD ITEMS SUPPLIED

 

OPTIONAL ACCESSORIES

SCM900/910/920 microphone

 

48V phantom power supply (SMPS-1)

User guide

 

Aluminum flight case (SMCC-2)

Warranty card

 

Shockmount (SSM-3)

Leatherette Pouch

 

Foam windscreen (FW-2)

FEATURES

The SCM Series microphones offer transformer-coupled balanced outputs and true condenser design (elements constantly biased by the pre-amp) for exceptionally low self noise and increased dynamic range, enhanced low and high end response with improved linearity across the frequency range and maximum SPL capacity.

The SCM Series microphones are available in a choice of 3 configurations: the SCM 900 (cardioid pattern only), The SCM910 (cardioid pattern, with selectable 10 dB attenuation pas and low-cut filter), and the SCM 920 (with selectable low-cut filter and omni or cardioid polar patterns).

Each of the three SCM Series microphones features a large diaphragm capsule (1.0 inch), hand tooled from brass and featuring an ultra-thin (3-micron) gold-evaporated on Mylar diaphragm for maximum sensitivity, transient response, long life, detail and tone. The SCM Series microphones use carefully selected Field Effect Transistors (FET), specially chosen for their low distortion and superior signal-to-noise ratio. (Note: For optimum performance, it is best to let your microphone warm up for 5 to 10 minutes)

Each SCM 900/910/920 is manufactured with the finest materials and features a machined housing with advanced internal shock mount construction for the highest structural integrity and rugged reliability. It requires 48V phantom power to operate, typically supplied by the microphone pre-amplifier or mixing console. The optional Nady SMPS-1 phantom power supply can also be used.

Loading...
+ 1 hidden pages