Nady Systems PPAS -112+ Technical Data

Features, Instructions
& Technical Data

ProPower Plus Active Series™ Speakers

P PAS - 112 +

Two Way Speaker

Ruggedly built, exceptional sound, most affordably priced – the
ProPower Plus Active Series™ from Nady Audio delivers the best
value in small PA speakers.

Congratulations!

You have just purchased one of the nest speakers on
the market today. The ProPower Plus Active Series™ was
developed using the expertise of professional sound engineers
and working musicians. You will nd your new NADY AUDIO
speaker has superior performance and greater exibility than
any other speaker in its price range.

We recommend that you read this instruction sheet carefully to
get the most out of your new unit. Thanks for selecting NADY
AUDIO and the PPAS-112+ as your choice in speakers.

FEATURES

AND SPECIFICATIONS

Full range, 2-way speaker with 12” woofer, 5”x10” horn are

• 100W Class A/B amplier

• All horns with high compression piezo drivers

• Durable black tolex cover

• Heavy duty plastic protective corners

• Integrated recessed carrying handles for easy handling

• Line level balanced XLR input / unbalanced RCA input

WARNINGS

When using this speaker, basic precautions should always be taken, including the following:

• Read all instructions before using the product.

• This product may be capable of producing sound levels that could cause permanent
hearing loss. Do not operate for a long period of time at a high volume level or at a
level that is uncomfortable. If you experience any hearing loss or ringing in the ears,
you should consult an audiologist.

• To avoid damage to the drivers, never overload the speaker.

• To avoid the risk of re, do not ever expose the speaker to a source of naked ames.
Also, it should be located away from heat sources such as radiators, heat vents, or
other devices (including ampliers)that produce heat.

• The product should be positioned so that proper ventilation is maintained.

• This speaker is designed for indoor use only. Do not expose to weather or high
humidity, rain, etc.

• Care should be taken so that objects do not fall into, and liquids are not spilled
through, the enclosure’s openings. Do not place containers of liquids on the speaker.

• Don’t place any heavy appliance or object (>130lbs/60kg) on the speaker enclosure.

• This unit is to be installed by qualied personnel only.

IMPORTANT SAFETY INSTRUCTIONS

• Balanced XLR output for daisy-chaining to other speakers

• 35mm (dia.) base mount inserts for mounting on speaker stands

• Sensitivity (1W/1M): 91.5dB

• Weight : 27.05lbs (12.2kg)

• Dimensions (WDH): 14.5”x 23”x 11” (35x58x28cm)

• This speaker is only to be used with power ampliers complying with the safety
requirement of EN or IEC60065.

• This product should be serviced by qualied service personnel if:
A. Objects have fallen into, or liquid has been spilled onto the product.
B. The product has been exposed to rain.
C. The product does not appear to operate normally or exhibits a marked
change in performance.
D. The product has been dropped, or the enclosure damaged.

• Do not attempt to service this unit. All servicing should be referred to qualied
service personnel.

AC~ 110V / 60Hz

use 2A 250V fuse only

OPERATIONS

1. Inputs - Balanced XLR / Unbalanced RCA

2. Output - Balanced XLR

3. Power / Clip LEDs - The Power LED will light green

when the unit is turned on. The Clip LED lights red when the
output signal is clipping. If the red LED ashes repeatedly, you
should turn down the volume to avoid audible distortion and
damage to the speaker.

Note: Speakers damaged due to clipping are not covered
under warranty.

4. Volume knob - Controls the Master Volume

5. AC POWER CORD Connector - Connects to the

AC power cable. Uses a typical IEC connecting power cable
(included)

6. Fuse Holder - Fuses may only be replaced by same type

and rating - 2A 250V

7. On/Off Switch - Turns the unit on and off.

TECHNICAL DATA

1.

3.

4.

7.

2.

6.

5.

ONE YEAR LIMITED WARRANTY

Please save this warranty and your original sales receipt and retain with your owner’s manual for future reference.

Nady Systems, Inc. warrants to the original consumer purchaser that the speaker is free from any defects in material or
workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the
warranty period, Nady Systems, Inc. will repair or replace the speaker free of charge, subject to verication of the defect or mal­function upon return to Nady Systems.

This warranty is subject to the following conditions:

1) This system must have been purchased from an authorized Nady dealer and all warranty service must be performed by
Nady’s service department. Any service not performed by Nady will automatically void this warranty.

2) Items not covered: physical damage resulting from improper handling of the speaker in transit from the factory by the
shipper (Nady Systems is not responsible for such damage and all such claims must be made against the shipping company
by the consignee.); damage caused by applying amplication power to the speaker in excess of its rated power (as indicated
by burnt speaker or horn coils or other components); damage or defects caused by abuse, neglect, accident, failure to
connect or operate the unit in a way that does not comply with applicable technical or safety regulations, or improper repair,
excessive heat or humidity, alteration causing cracks, broken housings or parts, appearance items; items damaged in
shipment to for repair. Warranty is void if Nady serial number has been removed.

SERVICE

(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at
[phone] or e-mail at [e-mail]

FOR YOUR NADY AUDIO PRODUCT

(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you
purchased this product.

NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608

Tel: [phone] • Fax: [phone] • www.nady.com