Nady Systems GEQ 215 User Manual
OWNER’S MANUAL
GEQ 215
EQUALIZERS
Graphic Equalizer
GEQ 215
Graphic Equalizer
Congratulations on your choice of the GEQ 215 graphic equalizer — you have purchased one of the nest graphic equalizers on the
market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will nd that your
new NADY AUDIO Equalizers has superior performance and greater exibility than any other equalizers in its price range. Please read
this manual carefully to get the most out of your new unit.
Thanks for selecting NADY AUDIO as your choice in graphic equalizers.
FEATURES
Compact and durable all-steel chassis design, the GEQ 215 provides optimum audio control for all live and recording applications,
plus ultimate operating convenience and maximum reliability.
• 2 Channel, Single Rack Space, 15—2/3rd Octave Bands Each
Channel
• Active balanced (XLR and 1/4” TRS) and unbalanced (RCA)
input/output connectors
• Constant Q bandwidth from each lter with 3% center frequency
accuracy
• Parallel lter design for minimal phase distortion
• Ultra low-noise circuitry
• Selectable range, 6dB or 12dB gain
• Center detents on faders
• Variable level control
• Power off automatic bypass function
• Equalizer ON/OFF bypass switch
• Peak (overload threshold) LED
• Shielded internal power supply with AC input and selectable line
voltage (~115V/60Hz or ~230V/50Hz)
• Ground lift switch
TABLE OF CONTENTS
FEATURES ................................................................................... 3
WARNING .................................................................................... 4
INSTALLATION ............................................................................ 5
OPERATING INSTRUCTIONS ..................................................... 6
FRONT PANEL CONTROLS & CONNECTIONS ......................... 7
REAR PANEL CONTROLS & CONNECTIONS ........................... 8
TYPICAL SET-UP ......................................................................... 9
Sound Reinforcement Applications........................................... 9
Musical Instrument Applications ............................................... 9
Studio Applications ................................................................... 9
SPECIFICATIONS ...................................................................... 10
WARRANTY ................................................................................11
Date of Purchase____________________________________
Dealer’s Name ______________________________________
City _______________________________________________
State_____________________Zip_____________________
Model #____________________________________________
Serial #___________________
3
WARNING
ATTENTION
:
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
An equilateral triangle enclosing a lightning flash/arrowhead symbol is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure which may be of sufficient
magnitude to constitute a risk of electric shock.
An equilateral triangle enclosing an exclamation point is intended to alert
the user to the presence of important operating and service instructions in
the literature enclosed with this unit.
IMPORTANT SAFETY INSTRUCTIONS
When using this electronic device, basic precautions should always be taken, including the following:
1. Read all instructions before using the product.
2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming
pool, etc.).
3. This product should be used only with a cart or stand that will keep it level and stable and prevent wobbling.
4. This product, in combination with headphones or speakers, may be capable of producing sound levels that could cause
permanent hearing loss. Do not operate for a long period of time at a high volume level or at a level that is uncomfortable.
If you experience any hearing loss or ringing in the ears, you should consult an audiologist.
5. The product should be positioned so that proper ventilation is maintained.
6. The product should be located away from heat sources such as radiators, heat vents, or other devices
(including ampliers) that produce heat.
7. The product should be connected to a power supply only of the type described in the operating instructions or as marked on the
product. Replace the fuse only with one of the specied type, size, and correct rating.
8. The power supply cord should: (1) be undamaged, (2) never share an outlet or extension cord with other devices so that the
outlet’s or extension cord’s power rating is exceeded, and (3) never be left plugged into the outlet when not being used for
a long period of time.
9. Care should be taken so that objects do not fall into, and liquids are not spilled through, the enclosure’s openings.
10. The product should be serviced by qualied service personnel if:
A. The power supply cord or the plug has been damaged.
B. Objects have fallen into, or liquid has been spilled onto the product.
C. The product has been exposed to rain.
D. The product does not appear to operate normally or exhibits a marked change in performance.
E. The product has been dropped, or the enclosure damaged.
11. Do not attempt to service the product beyond what is described in the user maintenance instructions. All other servicing should
be referred to qualied service personnel.
4
Loading...