MyWeigh Palmscale 8.0 User Manual

Palmscale® 8.0 User Manual

Precautions Before Using The Scale

The scale should always be used in an environment which is free from excessive air currents,
corrosives. vibration, and temperature or humidity extremes. These factors will affect 5he
displayed weight reading.

Please check www.myweigh.com for the latest version of this manual. in case of possible
revisions.

Scale Operation Notes

KEEP THE FOLLOWING POINTS IN MIND:

• If the display becomes locked, shows "--" or is inaccurate please recalibrate the scale.

• Do not Overload (exceed the capacity) of the scale including the weight of any trays or bowls

combined with objects you may be weighing. Overload or Dropping/shocking the scale could
damage- the scale and void your warranty.

• Allow sufficient warm up time. Turn the scale On and wait several seconds to give the internal
components a chance to stabilize before weighing.

• The cleaner the environment the better. Dust, dirt, moisture, vibration, air currents and

proximity to other electronic equipment can all cause an adverse effect on the reliability and
accuracy of your scale.

• Handle with care. Gently apply all items to weighed onto tray top. Although this scale is

designed to be quite durable. avoid rough treatment as this may permanently damage the internal
sensor and void your warranty.

• Avoid lengthy exposure to extreme heat or cold, your scale works best when operated and

stored at normal room temperature. Allow the unit to acclimate to any major temperature change
for at least one hour before use.

• Place the item to be weighed on the platform. After the stable weight is displayed remove the
item immediately. This will prolong the longevity and accuracy of this weighing instrument.

• Do not operate near an in-use cell phone. Cordless phone. radio, computer or other electronic
device. These devices emit RF and can cause unstable scale readings. If your scale ever performs
poorly, try moving the scale to a different room or location. This Is a very precise scale - the
display may seem to wander or jump when weighing. This is due to air currents or vibrations.
Stable weighing is achieved when the display remains fixed for 3 seconds or the stable indicator
appears.

Turn on The Scale

Press to turn on the scale. The scale will go through a quick warm up procedure. then be
ready for use.

Display Window

Current reading is stable.

Scale is in TARE made.

Scale is in ZERO made.

Battery is at low voltage.

Minus

The weight can't be displayed

"OVER LOAD" The weight is above the capacity.

Weighmeter (patented technology)

KEY PAD FUNCTIONS

Power switch

Press this key to turn the scale on. Once the unit is on, press then release the same key to turn the
scale off.

Zero or tare

Press to reset the scale to zero when the weight on the tray Is below 5% of the capacity of
the scale. The ZERO indicator will appear. This key is also used as a TARE function
when the weight and the tray is above 5% of the capacity. The