MyMix MIXPACK4 User Manual
Personal Monitor Mixing and Multitrack Recording System
?
Individual stereo mixes for each musician with up to
16 channels of audio
?
Up to 18 tracks of recording to optional SDHC card
?
Intuitive interface with full color LCD display
?
Networked via standard or PoE Fast Ethernet
switches
?
Dual mic/line inputs with 48v phantom power
?
Separate headphone and stereo line outputs
?
Mounts easily to microphone stands with included
adapter
myMix
monitor mixing and recording
system that allows each user to
create an individual local mix. The
system is networked using standard
Fast Ethernet (100MBps) switches.
Each unit has two local inputs for
microphone or line signals and a
stereo master output. units
are automatically detected on the
network - identified by the names of
each myMix and their respective
input channels. can mix up to
16 channels, which can be altered in
volume, tone, panorama, and mute
An internal effects unit with 6 reverb
presets and an adjustable delay can
be added to each input signal. The
stereo output signal is available on
balanced 1/4 jacks and on a 3.5mm
headphone jack. A 4-band fully
parametric EQ can be used for the
output signal. All settings of the
mixer are automatically stored in
profiles. The Recording function
allows the recording of the local mix
as well as the individual network
signals in multi-track as time
stamped 24-bit WAV file on an
optional SD/SDHC card. is
powered by the included external
psu or via POE (requires 15 W
minimum per unit) . The i n c luded
adaptor allows easy mounting to
standard microphone stands.
is a networked personal
myMix
myMix
myMix
Inputs
Impedance (Microphone / Line) 2 k / 20 kΩΩ
Input Gain (Microphone)
Input Gain ( Line)
Maximum Input Level (Mic/Line)
Frequency Response 20 Hz to 20 kHz (+0dB, -1dB)
Outputs
Impedance (Line / Headphone Outputs)
Max Output Level (Line) +21 dBu
Signal to Noise Ratio
THD +N (Microphone Input to Line Out)
Cross talk (L to R)
Mute
System Network
Network Type Fast Ethernet 100 Mbps
Network Cabling Cat 5
System Latency 4 ms
AD/DA Conversion 24-bit
Recording
Recording Media SD or SDHC card
Recording Format wav file, 24-bit, 48kHz sampling rate
Connectors
Microphone Input Balanced XLR (1 gnd, 2 pos, 3 neg)
Line Input Balanced ¼” jack (tip pos, ring neg, sleeve gnd)
Line Output Balanced ¼” jack (tip pos, ring neg, sleeve gnd)
Headphone Output 3.5mm stereo jack
System Network RJ45
Weight and Dimensions
Net Size (excl. mic stand adaptor) W x H x D 134mm x 171mm x 60 mm (5.3” x 6.7” x 2.4”)
Net Weight (excl. mic stand adaptor) 0,5 kg (1.1 lbs)
Packaged Size W x H x D 172mm x 280mm x 80mm (6.8” x 11” x 3.2”)
Packaged Weight 0,9 kg (2.0 lbs)
Included Accessory myMix PSU (24V, 12W)
SPECIFICATIONS
variable from +4 dB to +60 dB
variable from -16 dB to +40 dB
+14 dBu / +34 dBu
75 / to drive >16Ω balanced Ω
> 104 dB
< 0,022 %
< -80 dB
> 100 dB
myMix microphone stand adaptor
E & OE. All specifications subject to change without prior notice.
myMix is a trademark of MOVEK, LLC. Patent Pending, all rights reserved by MOVEK LLC, USA.
Rear Panel
Dimensions in mm
Personal Monitor Mixing and Multitrack Recording System
134
171
Typical System Set Up
myMix is powered via the
included external psu or using
Power Over Ethernet (POE)
from the switch (requires 15W
per unit).
.....
60
with attached microphone stand adapter
Power
Supply
48
75
.....
E & OE. All specifications subject to change without prior notice.
myMix is a trademark of MOVEK, LLC. Patent Pending, all rights reserved by MOVEK LLC, USA.
Loading...