Mustek TP-6000 User Manual

TP-6000 SERIES
USER’S MANUAL
TOUCH PANEL POS SYSTEM
Rev. : A1
SOME IMPORTANT NOTES
FCC NOTES
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person other than an authorized technician. The user should consult his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by no means responsible for any damage or hazard caused by improper application.
ABOUT THIS MANUAL
This manual assists the user to utilize the hardware of the TP6000 series that is a member of the POSIFLEX integrated point-of-sale terminal product family. The TP6000 is a compact point-of­sale system that gives the most user friendly human interface by providing touch panel input and combines the performance and affordability of personal computers with the elegance and reliability of business machine. The TP6000 also provides the built-in networking capability for easy communication among multiple terminals in addition to the data transfer and control through back office server.
The manufacturer of the TP6000 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice due to the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date information through our web sites: http://www.posiflex.com.tw, http://www.posiflexuk.com or http://www.
posiflexusa.com
© Copyright Mustek Corp. 2000
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of Mustek Corp. the publisher of this documentation.
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Mustek Corp..
Other brand and product names are trademarks and registered trademarks and service marks of their respective owners.
CMANUTP6000-2
TABLE OF CONTENTS
BRIEF INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
THE USER’S MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
THE PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
Optional Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3
PARTS IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
FRONT VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
SIDE VIEWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2
Right Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2
Left Side View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2
REAR VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3
REAR VIEW OF MAIN UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3
ADJUSTABLE STAND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . 2 - 4
BOTTOM OF STAND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . 2 - 4
INSTALLATION GUIDES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
SEPARATING MAIN UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
PREPARING STAND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . 3 - 2
INSTALLING UPS BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3
ROUTING THE CABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 3
PREPARING THE MAIN UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4
JOINING MAIN UNIT AND STAND . . . . . . . . . . . . . . . . . . . . . . 3 - 4
OPENING CABLE COVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5
CONNECTING CABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 6
i
INSTALLING CASH DRAWERS . . . . . . . . . . . . . . . . . . . . . . . . 3 - 6
WALL MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7
LOCATION FOR INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . 3 - 7
USING THE TOUCH POS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
APPLICATION ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
External Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1
Serial Port – COM1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2
Serial Port – COM2/3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2
POWER ON/OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2
LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2
Hardware Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3
Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4
Preset Power On Control . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4
MAGNETIC STRIPE READER . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
CASH DRAWER(S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
DISPLAY RESOLUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
SOUND PORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 5
TOUCH PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6
TOUCH TERMINAL MANAGER . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6
RS232 TOUCH MONITOR MOUSE . . . . . . . . . . . . . . . . . . . . . . 4 - 7
ii
BRIEF INTRODUCTION
THE USER’S MANUAL
The purpose of this manual is to guide the user in the initial installation and general use of the Posiflex fully integrated compact touch terminal system with touch panel input. TP6000 series is a product group of fully integrated PC based touch terminal systems. However, this manual does not intend to explain any application software that may be supplied with the TP6000 systems. The user should consult the software supplier or the VAR that he/she purchased from for such information. The user is encouraged to visit our web site http://www.posiflex.com.tw via the Internet for further information of our products.
THE PRODUCT
Overview
The TP6000 series is one of the most compact yet fully integrated touch terminal systems. This series provides excellent functionality and two choices of enclosure colors, charcoal and beige.
Configuration
STANDARD FEATURES
a) CPU: Celeron or Pentium III on socket 370 per factory setting
HDD: 6.4 GB or above
b) Support MS DOS, WIN98, WIN NT, WIN 2000 environment
c) Power saving support: doze or suspend mode
d) High quality 12.1” / 15.1” TFT active matrix LCD panel
e) Vertical type LCD panel with easy tilt angle adjustment from 17.5° to
87.5°
TP6000 USER’S MANUAL 1 - 1
f) Height adjustment: the high / low adjustment gives 20 mm difference in
height
g) Resistive type touch panel
h) Extra long life touch panel that endures 10 million up to 35 million
touches in one location
i) Spill proof water resistant structure allows for easy cleaning
j) Easy maintenance construction
k) Various I/O ports supported, including:
1. 1 PS/2 KB port
2. 1 PS/2 mouse port
3. Serial Ports: 1 for TP6XXXR of system revision A. 2 for
TP6XXXP of system revision A. 3 for TP6XXXR of system revision since B. 4 for TP6XXXP of system revision since B. All with capability for +5V DC support
4. 1 parallel port
5. 5 USB ports
6. 1 LAN port 10/100 base T Ethernet
7. 1 Cash drawer port. Allows control over 2 cash drawers with the
functionality of open drawer detection
8. 1 MSR connector
9. 1 external FDD port
10. 1 external VGA monitor port
11. 1 UPS battery connector
12. 1 Audio line out port (option) l) Preprogrammed timer wake up function m) RS232 COM port MODEM ring up function n) LAN wake up function o) Built-in UPS function to protect the system from intermittent power
failure. (Battery is optional)
p) Accidental power off protection – The power switch is safely located at
one side, and can be defined as a “ON” only or “ON/OFF” through software commands.
TP6000 USER’S MANUAL 1 - 2
q) Touch control functions: left/right mouse buttons, double click, drag &
drop
r) Touch sound can be pitch adjusted and enabled/disabled by software
control
s) High resolution touch sensor: 1024 x 1024 t) DRAM memory can extend to 1GB u) Dual display support under OS’s supporting multiple display output v) VGA memory size selectable by software (up to 64 MB) w) Integrated structure for optional MSR x) Software selectable MSR parameters y) 2 color choices: beige or charcoal
OPTIONAL ITEMS
Note: The factory must install all items underlined in the list below. Posiflex
Dealers can install all other items.
a) Audio line out port b) UPS battery c) DRAM memory expandable to 1GB d) Integrated ISO 2 or 3 track MSR e) 2 in 1 cash drawer control cable (CCBLA-238) f) Preloaded Windows 98, WIN NT or WIN 2000 g) VFD or LCD stand alone Posiflex pole display h) Wall mount kit i) External FDD
TP6000 USER’S MANUAL 1 - 3
TP6000 USER’S MANUAL 1 - 4
PARTS IDENTIFICATION
Assembly
FRONT VIEW
Display Screen + Touch Panel
Main Unit
Adjustable Stand
MSR Unit
The MSR unit is optional for both 12” and 15” models. The orange/green LED
in the logo area is multipurpose. Please refer to the paragraph discussing the LED indication in the “USING THE TOUCH POS” chapter of this manual.
TP6000 USER’S MANUAL 2 - 1
Loading...
+ 18 hidden pages