Musical Fidelity A-324 Owners manual

24

A3

Multistandard 96-192kHz 24 Bit

Digital-to-Analog Convertor

MUSICAL FIDELITY A3 192K UPSAMPLING DAC

2 4

INSTRUCTIONS FOR USE

96kHz

SAMPLE

COAXIAL OPTICAL LOCKED

192kHz

Issue 4: March 2003

A324DAC Instructions for Use Page 1 of 6

SAFETY INFORMATION

IMPORTANT! (U.K. only)

This unit is supplied in the U.K. with a mains lead fitted with a moulded 13 amp plug.
If, for any reason, you need to cut off this plug, please remove the fuse holder and dispose of
the plug safely, out of reach of children. It must not be plugged into a mains outlet.

The wires in the mains lead supplied with this appliance are coloured in accordance
with the following code:

Green and yellow..............Earth

Blue...............................Neutral

Brown................................Live

WARNING - This appliance must be earthed

As the colours of the wires of the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured green-and-yellow must be connected to the terminal in the plug
which is marked with the letter E or coloured green or green-and-yellow, or by the earth
symbol:

The wire which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red.

The wire which is coloured blue must be connected to the terminal which is marked with the
letter N or coloured black.

If connecting to a BS1363 plug, a 13 amp fuse must be used.

WARNING:

Any modifications to this product not expressly approved by

Musical Fidelity who is the party responsible for standards

compliance could void the user’s authority to operate this

equipment.

Issue 4: March 2003

A324DAC Instructions for Use Page 2 of 6