Musical Fidelity A-220 Owners manual
A220 CLASS A INTEGRATED
AMPLIFIER
INSTRUCTIONS FOR USE
Thank you for purchasing the Musical Fidelity
A220 Class A Integrated Amplifier. Used properly
and carefully, it should give you many years of
outstanding musical reproduction.
The A220 operates in Class A which in our
experience offers the ultimate in musical accuracy
and pleasure. The A220 is based on ideas and
principles developed in the legendary A1000
Class A Integrated.
Aesthetically, the A220 is a perfect match for
the Elektra tuner and CD players. Together, they
form one of the finest hi-fi systems that you can own
today.
Dust regularly with a soft duster or soft brush
but be careful using cleaning or polishing agents -
they may harm the surface finish.
If you have any questions about anything in
your audio system, please consult your dealer who
is there to help and advise you.
Instructions For Use. Page 1A220
PLEASE READ
IMPORTANT!
This unit is supplied in the UK with a mains lead fitted with a moulded 13 amp
plug. If, for any reason, you need to cut off this plug, please observe the following
safety precautions. Please dispose of the cut-off plug safely. It must not be plugged
into a mains power supply.
The wires in the mains lead supplied with this appliance are coloured in ac-
cordance with the following code:
Green and yellow..............Earth
Blue...............................Neutral
Brown................................Live
WARNING - This appliance must be earthed
As the colours of the wires of the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as
follows:
•The wire which is coloured green-and-yellow must be connected to the termi-
nal in the plug which is marked with the letter E or coloured green or green-andyellow, or by the earth symbol .
•The wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
•The wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black.
•If connecting to a BS1363 plug, a 10 amp fuse must be used.
WARNING - Speaker Terminals
In order to comply with BSEN60-065 safety regulations, the 4mm. banana plug
holes have been fitted with plastic blanking pieces. Removal of these will invalidate
any safety approval of this unit.
WARNING - Radio Frequency Interference (RFI)
This hi-fi product has been tested to ensure that its operation will not be adversely affected by normal background levels of RFI. It is possible that if this product is subjected to abnormally high levels of RFI the unit may be susceptible and not
perform as expected. In the unlikely event of this happening on a regular basis,
please contact Musical Fidelity's service department.
The unit has also been tested to ensure that it does not radiate excessive levels
of RFI that could affect other pieces of electronic or electrical equipment.
The electronics in modern hi-fi equipment is complex and hence may be damaged by lightning. It is possible that during electrical storms the operation of some
equipment may be adversely affected. For complete protection of your hi-fi system
during such storms, mains plugs should be removed and aerial leads disconnected.
Always ensure that when disconnecting and reconnecting your hi-fi equipment
the mains supply is switched off.
Instructions For Use. Page 2A220
CONNECTIONS AND FACILITIES
1 2 3 4 5
FRONT PANEL
1 On/off switch
2 Power indicator LED
3 Volume control
4 Tape monitor button
5 Source selector knob
5 6 7 8 9 10 11 12 13
BACK PANEL
5 Earth terminal
6 Phono (MM) Input
7 CD Input
8 Tuner Input
9 Aux Input
10 Tape Input
11 Video Input
12 Tape Record Output
13 Preamp Output
14 Outputs to loudspeakers
15 IEC mains inlet / fuseholder
14 15
Instructions For Use. Page 3A220
Loading...