Muratec F116P User Manual

Muratec F116P Installation and Training Guide

Place a check beside each step taken.

Installation:

_____1. Remove all tape and packing materials. (Basic setup_22 in manual).

_____2. Connect handset to unit. Plug phone line into machine. Press On-hook dial
to verify presence of dial tone. (Basic setup_22)

_____3. Install printing supplies and paper. (Basic Setup_25, Media and tray_28-

30)

_____4. Make a copy to test unit (Copying_31). Send a fax and receive a fax
(Faxing_33).

_____5. Print the configuration page by pressing Menu until the display registers

[Reports]. Press the right arrow key until [Configuration] is displayed.
Press [OK].

Training:

_____1. Show customer how to program the date and time (Basic setup_23).

_____2. Show customer how to program TTI and number (Basic setup_23).

_____3. Show customer how to set paper type and size (Media and tray_28-30).

_____4. Show customer how to set sound settings (ringer, speaker, etc.) (Pg. 1.37-

1.38).
_____5. Give customer 800 # (1-800-347-3296) for assistance.

_____6. Instruct customer how to clear paper jams (Troubleshooting_53-58)

Site Name:___________________________________________

Customer signature:______________________________Date_____/_____/_____

Technician signauture:____________________________Date_____/_____/_____

Model No:_________________________Serial No:_________________________

By signing this installation checklist, I am acknowledging that the installation and product training provided was

concise and the Muratec machine and all applicable functions are operating to my satisfaction.

Pg. 2