Multiquip SP605716, SP605726, SP605720, SP605736, SP605730 User Manual

PARTS MANUAL

Diamond Back

SP4 "STREET PRO"

PROFESSIONAL SLAB SAW

57 HP DEUTZ DIESEL ENGINE

MODELS

SP605716, SP605720, SP605726

SP605730, SP605736

Revision #0 (03/22/06)

To find the latest revision of this

publication, visit our website at:

www.multiquip.com

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

SP-6057 CONCRETE SAW — PROPOSITION 65 WARNING

PAGE 2 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — SILICOSIS/RESPIRATORY WARNINGS

WARNING

SILICOSIS WARNING RESPIRATORY HAZARDS

Grinding/cutting/drilling of masonry, concrete, metal and
other materials with silica in their composition may give
off dust or mists containing crystalline silica. Silica is a
basic component of sand, quartz, brick clay, granite and
numerous other minerals and rocks. Repeated and/or
substantial inhalation of airborne crystalline silica can
cause serious or fatal respiratory diseases, including
silicosis. In addition, California and some other
authorities have listed respirable crystalline silica as a
substance known to cause cancer. When cutting such
materials, always follow the respiratory precautions
mentioned above.

WARNING

Grinding/cutting/drilling of masonry, concrete, metal and
other materials can generate dust, mists and fumes
containing chemicals known to cause serious or fatal
injury or illness, such as respiratory disease, cancer,
birth defects or other reproductive harm. If you are
unfamiliar with the risks associated with the particular
process and/or material being cut or the composition of
the tool being used, review the material safety data
sheet and/or consult your employer, the material
manufacturer/supplier, governmental agencies such as
OSHA and NIOSH and other sources on hazardous
materials. California and some other authorities, for
instance, have published lists of substances known to
cause cancer, reproductive toxicity, or other harmful
effects.

Control dust, mist and fumes at the source where
possible. In this regard use good work practices and
follow the recommendations of the manufacturers or
suppliers, OSHA/NIOSH, and occupational and trade
associations. Water should be used for dust
suppression when wet cutting is feasible. When the
hazards from inhalation of dust, mists and fumes cannot
be eliminated, the operator and any bystanders should
always wear a respirator approved by NIOSH/MSHA for
the materials being used.

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 3

TABLE OF CONTENTS

MQ SP4 “Street Pro”

Professional Slab Saw

Proposition 65 Warning ............................................. 2

Silicosis/Respiratory Warnings .................................. 3

Table Of Contents ..................................................... 4

Parts Ordering Procedures ....................................... 5

Explanation Of Codes In Remarks Column .............. 6

Suggested Spare Parts ............................................. 7

Component Drawings

Deck/Gauge Panel Assembly................................. 8-9

Nameplate and Decals Assembly ...................... 10-11

Access Panel Assembly ..................................... 12-13

Fuel Tank Assembly ........................................... 14-15

Lift Pump Circuit Assembly ................................ 16-17

F-N-R Control Handle Assembly........................ 18-19

Joystick Mounting Assembly .............................. 20-21

Water System Assembly .................................... 22-23

Pulley and V-Belt Assembly................................ 24-25

Depth Stop Meter/Cable Assembly .................... 26-27

Depth Stop Cylinder/Valve Assembly ................. 28-29

Belt Guard .......................................................... 30-31

Engine Assembly ............................................... 32-33

Air Intake Hose Assembly .................................. 34-35

Muffler Kit Assembly .......................................... 36-37

Engine Mounting ................................................ 38-39

Pointer Assembly ............................................... 40-41

Gauges and Controls Assembly ........................ 42-43

Battery Assembly ............................................... 44-45

Front Axle Assembly .......................................... 46-47

Drive Assembly .................................................. 48-49

Bladeshaft and Mounting Assembly .................. 50-51

Light Connector/Dash Panel Assembly.............. 52-53

Engine Guard Assembly .................................... 54-55

Blade Guard Mount/ Wiper Assembly ................ 56-57

Lower Belt Guard Assembly .............................. 58-59

Handle and Light Assembly ............................... 60-61

Rear Point and Foot Rest Assembly .................. 62-63

Console Mounting Assembly ............................. 64-65

Cable Mount Assembly ...................................... 66-67

Optional Flange Guard Assembly ...................... 68-69

Blade Guard Assembly ...................................... 70-71

Wiring Harness/Circuit Breaker Assembly ......... 72-73

Water Pump Kit Assembly .................................. 74-75

Glow Plug Kit Assembly ..................................... 76-77

Bladeshaft Seal Kit Assembly ............................ 78-79

Bushing Extension Kits Assembly ..................... 80-81

Engine Block Heater Assembly (Option) ............ 82-83

Collar/Flange Puller Assembly (Option) ............. 84-85

Seal Sleeve Puller Assembly ............................. 86-87

Seal Sleeve Puller Assembly ............................. 88-89

PAGE 4 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

Effective: June 1st, 2005

Ordering parts has never been easier!

PARTS ORDERING PROCEDURES

Choose from three easy options:

Best Deal!

Order via Internet (Dealers Only):

Order parts on-line using Multiquip’s SmartEquip website!

■

View Parts Diagrams

■

Order Parts

■

Print Specification Information

Goto www.multiquip.com and click on

Order Par ts

to log in and save!

Order via Fax (Dealers Only):

All customers are welcome to order parts via Fax.

Domestic (US) Customers dial:

1-800-6-PARTS-7 (800-672-7877)

Non-Dealer Customers:

Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.

Order via Phone:

If you have an MQ Account, to obtain a
Username and Password, E-mail us at:

[e-mail].

To obtain an MQ Account, contact your
District Sales Manager for more information.

Use the

internet

on

Standard orders

complete part numbers.*

Fax

your order in and qualify for a 3% Discount

on

Standard orders

complete part numbers.*

Domestic (US) Dealers Call:

1-800-427-1244

and qualify for a 5% Discount

for all orders which include

for all orders which include

International Customers

their local Multiquip Representatives for
Parts Ordering information.

Note: Discounts Are Subject To Change

Note: Discounts Are Subject To Change

should contact

❒❒

❒

❒❒

❒❒

❒

❒❒

❒❒

❒

❒❒

❒❒

❒

❒❒
❒❒

❒

❒❒

❒❒

❒

❒❒

www.multiquip.com

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 5

When ordering parts, please supply:

❒❒

Dealer Account Number

Dealer Name and Address

Shipping Address (if different than billing address)

Return Fax Number
Applicable Model Number

Quantity, Part Number and Description of Each Part

NOTE

Unless otherwise indicated by customer, all orders are treated as
within 24 hours. We will make every effort to ship
if received prior to 2PM PST.

WE ACCEPT ALL MAJOR CREDIT CARDS!

❒

❒❒

Stock Orders

Specify Preferred Method of Shipment:

✓

Fed Ex/UPS

■

Priority One

■

Ground

■ Next Day

■

Second/Third Day

Air Shipments

must be noted on fax or web order form.

✓ DHL
✓

Tr u ck

Standard Orders

the same day the order is received,

and will ship

SP-6057 — EXPLANATION OF CODE IN REMARKS COLUMN

The following section explains the different symbols and remarks
used in the Parts section of this manual. Use the help numbers
found on the back page of the manual if there are any questions.

The contents and part numbers listed in the parts section are
subject to change
guarantee the availibility of the parts listed.

Sample Parts List:

NO. PART NO. PART NAME QTY. REMARKS

1 12345 BOLT ....................... 1 .... INCLUDES ITEMS W/

2

*

2*12347 WASHER, 3/8 IN. .... 1....

3 12348 HOSE .................... A/R .. MAKE LOCALLY

4 12349 BEARING ................ 1 .... S/N 2345B AND ABOVE

NO. Column

Unique Symbols - All items with same unique symbol

, #, +, %, or >) in the number column belong to the same

(

*

assembly or kit, which is indicated by a note in the “Remarks”
column.

Duplicate Item Numbers - Duplicate numbers indicate
multiple part numbers are in effect for the same general item,
such as different size saw blade guards in use or a part that
has been updated on newer versions of the same machine.

NOTE

without notice

WASHER, 1/4 IN. ...........

When ordering a part that has more
than one item number listed, check
the remarks column for help in
determining the proper part to order.

. Multiquip does not

NOT SOLD SEPARATELY
MQ-45T ONLY

QTY. Column

Numbers Used - Item quantity can be indicated by a number,

a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other parts

that are sold in bulk and cut to length.
A blank entry generally indicates that the item is not sold

separately. Other entries will be clarified in the “Remarks”
Column.

REMARKS Column

Some of the most common notes found in the “Remarks”

*

Column are listed below. Other additional notes needed to
describe the item can also be shown.

Assembly/Kit

symbol will be included when this item is purchased.
Indicated by:

“INCLUDES ITEMS W/(unique symbol)”

Serial Number Break

range where a particular part is used.
Indicated by:

“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”

Specific Model Number Use

only with the specific model number or model number variant
listed. It can also be used to show a part is NOT used on a
specific model or model number variant.

Indicated by:

“XXXXX ONLY”
“NOT USED ON XXXX”

- All items on the parts list with the same unique

- Used to list an effective serial number

- Indicates that the part is used

PART NO. Column

Numbers Used - Part numbers can be indicated by a number,

a blank entry, or TBD.
TBD (To Be Determined) is generally used to show a part that

has not been assigned a formal part number at time of
publication.

A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will be
clarified in the “Remarks” Column.

PAGE 6 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

“Make/Obtain Locally”

purchased at any hardware shop or made out of available
items. Examples include battery cables, shims, and certain
washers and nuts.

“Not Sold Separately”

purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available for
sale through Multiquip.

- Indicates that the part can be

- Indicates that an item cannot be

SP-6057 CONCRETE SAW — SUGGESTED SPARE PARTS

SP-6057 CONCRETE SAW

1 to 5 Units

Qty. ..... P/N ......................... Description

1 ......... 345008 .................... Coupler, Splined

1 ......... 446010 .................... Valve, Cartridge

1 ......... 560028-5 ................. Switch Assembly

1 ......... 521004 .................... V-Belt (16", 20" and 26" only)

1 ......... 521001 .................... V-Belt (30" and 36" only)

1 ......... 521007 .................... V-Belt All Models

2 ......... 520007 .................... 5G 3VX 530 drive belt

1 ......... 300008 .................... Primary Air Filter Element

1 ......... 300009 .................... Safety Air Filter Element

1 ......... 306006 .................... Transaxle Hydraulic Filter

2 ......... 500009 .................... Wheel, Rear Axle

2 ......... 582038 .................... Bushing, Rear Wheel

2 ......... 180003 .................... Outer Flange

2 ......... 180004 .................... Inner Flange

1 ......... 582012 .................... Bushing, Flange

1 ......... 915316 .................... Screw, HHC 5/8-11 x 3 LH Gr8

1 ......... 915315 .................... Screw, HHC 5/8-11 x 3 RH Gr8

1 ......... 577009 .................... Gasket, Drain Plug

1 ......... 306012 .................... Engine Oil Filter, Deutz

1 ......... 304010 .................... Engine Fuel Filter, Deutz

1 ......... 362002 .................... Tube, B.G. Water Delivery R.H.

1 ......... 362003 .................... Tube, B.G. Water Delivery L.H.

1 ......... 25643 ..................... Relief Check Valve

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 7

SP-6057 CONCRETE SAW — DECK/GAUGE PANEL ASSY.

DECK PANEL DECAL ASSY.

PAGE 8 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — DECK/GAUGE PANEL ASSY.

DECK/GAUGE PANEL ASSY.

NO PART NO PART NAME QTY. REMARKS

1 600151 GAUGE PANEL, 6000 SERIES 1
2 600152 DECK PANEL, 6000 SERIES 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 9

SP-6057 CONCRETE SAW — NAMEPLATE AND DECALS ASSY.

NAMEPLATE AND DECAL ASSY.

PAGE 10 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — NAMEPLATE AND DECALS ASSY.

NAMEPLATE AND DECAL ASSY.

NO PART NO PART NAME QTY. REMARKS

1 25250-001 DECAL, WARNING, KEEP FEET CLEAR 2
2 606004 DECAL, BLADE GUARD REMOVAL 2
3 25782 DECAL, MQ DIAMOND LOGO 4

4 21302 DECAL, WARNING, INSTALL BLADE GUARD ............ 1 .............. REPLACES P/N 606004

5 TBD DECAL, SP4 LOGO 2
6 13118 DECAL, POWDER COATED 1
7 35137 DECAL, WARNING, READ MANUAL 1

8 DECAL, NAMEPLATE .................................................. 1.............. CONTACT MQ PARTS DEPT.

9 M600002 DECAL, DIESEL FUEL ONLY 1
10 22122-001 DECAL, WARNING, SERIOUS INJURY 1
11 25249-001 DECAL, WARNING, KEEP HANDS CLEAR 2
12 23330-001 DECAL, CAUTION, DRIVE BELT 1
13 25491 DECAL, ROTATION, CW 1
14 20525 DECAL, WARNING, PROPOSITION 65 1
15 604001 DECAL, WARNING, INSTALL BELT GUARD 1
16 25678 DECAL, ROTATION, CCW 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 11

ACCESS PANEL ASSY.

SP-6057 CONCRETE SAW — ACCESS PANEL ASSY.

PAGE 12 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — ACCESS PANEL ASSY.

ACCESS PANEL ASSY.

NO PART NO PART NAME QTY. REMARKS

1 102039 PANEL ASSY., REAR CONSOLE, RED ........................ 1 ................. INCLUDES ITEMS W/

2

*

3

*

4

*

5

*

6

*

7

*

8

*

9 29093 GASKET, TRIMLOCK X-109BT 2

560020 LATCH, REAR SAW ACCESS PANEL 2
12287 SCREW, THP 1/4-20 X 3/4" SS 4
102039-1 PANEL, REAR CONSOLE 6000, RED 1
577002 WEATHER STRIP, REAR SAW ACCESS PANEL 1.75 FT.
29057 DOCUMENT BOX, CP90007-07 1
10024 NUT, NYLOCK 1/4-20 4
10930 WASHER, FENDER, 1/4 X 1-1/4" 4

*

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 13

FUEL TANK ASSY.

SP-6057 CONCRETE SAW — FUEL TANK ASSY.

PAGE 14 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — FUEL TANK ASSY.

FUEL TANK ASSY.

NO PART NO PART NAME QTY. REMARK

1

*

2

*

3

*

4

*

5

*

6

*

7

*

8

*

9 25553 FUEL TANK ASSY. ......................................................... 1 ................. INCLUDES ITEMS W/

10 102041 PLATFORM W/A SAW FUEL TANK 1
11 933242 WASHER, FLAT SAE 3/8" GRADE 9 5
12 0166 SCREW, HHC 3/8-16" X 7/8" 5

140004 FUEL TANK, 6000 & 6400 10 GAL 1
29509 CAP, FUEL TANK 2.25 DIA, ONE WAY VALVE 1
19633 BUSHING, RUBBER FUEL DAPCO 10672 2
368006 FITTING, FUEL 90 DEG. #4 X #6 BARB 1
35009 HOSE, 22.5" - 5/16" FUEL LINE 1
19473 CLAMP, HOSE WORM # 2 4
35007 HOSE, 26.5" - 1/4" FUEL LINE 1
446025 VALVE, FUEL ON/OFF 1

*

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 15

LIFT PUMP CIRCUIT ASSY.

SP-6057 CONCRETE SAW — LIFT PUMP CIRCUIT ASSY.

PAGE 16 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — LIFT PUMP CIRCUIT ASSY.

LIFT PUMP CIRCUIT ASSY.

NO PART NO PART NAME QTY. REMARK

1 340010 PUMP ASSY., HYDRAULIC LIFT .................................... 1........... INCLUDES ITEMS W/

2 35255 SOLENOID ASSY., LIFT PUMP ...................................... 1........... INCLUDES ITEMS W/

3 446009 SOLENOID VALVE ASSY., SAW LIFT............................. 1 ........... INCLUDES ITEMS W/#

4 25542 CYLINDER ASSY., SAW LIFT ......................................... 1........... INCLUDES ITEMS W/%

5 21095 FITTING, STR 4MJ - 4MO 3
6 25758 FITTING, ORIFICE 4MJ - 4MO X .026 1
7 368817 FITTING, 90 4MJ - 4MO 2
8 25941 FITTING BRANCH TOP SWIVEL 4MJ - 4MJ - 4FJ 1
9 366690 FITTING, TEE RUN 4MJ - 4MJ - 4FJ 1
10 35001 HOSE ASSY. 13.2" #4HP W/370821/370895 1
11 35002 HOSE ASSY. 13.7" #4HP W/370821/370821 1
12 35003 HOSE ASSY. 19.7" #4HP W/370821/370821 1
13 35008 HOSE ASSY., 63.5" #4LP W/370670/370895 1

14 570050 CLAMP ASSY., #4 SINGLE HOSE .................................. 2 ........... INCLUDES ITEMS W/+

15 169000 PIN, CYLINDER ROD END 2
16 06500-007 SCREW, HHC 5/16-18 x 7/8 2
17 933241 WASHER, FLAT SAE 5/16 GRD 9 YZ 4
18 4683 SCREW, HHC 5/16-18 X 5/8 2
19 2203 WASHER, FLAT, #10 2
20 923186 SCREW, SHC 12-24 X 3/4 2
21 933240 WASHER, FLAT SAE 1/4 GRD 9 YZ 6
22 2508 SCREW, HHC 1/4-20 x 2-1/4 2
23
24
25
26
27# 444014 CATRIDGE BODY 1
28# 446010 VALVE CARTRIDGE 1
29# 405070 SEAL, WEATHERPACK, 20-22 GA RED 2
30# 446029 COIL, 12 VDC CARTRIDGE VALVE 1
32# 405035 PLUG-SEAL WEATHER PACK GREEN 1
33# 405066 CONNECTOR, WEATHERPACK 3 PIN MALE 1
34% 480003 SEAL, OIL CR #9815 4
35% 2621 FITTING, GREASE ZERK STR. 1/4-28 2
36% 447005 CYLINDER LIFT, 1.75 X 4.120 1
37+ 5277 HHC 1/4-20 X 1-1/2 4
38
39
40
41
42
43
44

12171 SEAL, WEATHERPACK, 16-18 GA GREEN 2

*

# 12179 TERMINAL, WEATHERPACK , MALE 14-16 GA 4

*

12176 CONNECTOR, WEATHERPACK 2 PIN MALE 1

*

25628 SOLENOID, LIFT PUMP 1

*

>

340030 1200 WATT MOTOR ASSY. 1

>

345006 SPLINED COUPLER 1

>

25659 ADAPTER 1

>

25660 HYDRAULIC PUMP 1

>

25643 RELIEF CHECK VALVE 1

>

147006 FENNER SMALL FILLER CAP 1

>

144010 .5L MICROPACK TANK 1

>

*

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 17

SP-6057 CONCRETE SAW — F-N-R CONTROL AND HANDLE ASSY.

F-N-R CONTROL AND HANDLE ASSY.

PAGE 18 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — F-N-R CONTROL AND HANDLE ASSY.

F-N-R CONTROL AND HANDLE ASSY.

NO PART NO PART NAME QTY. REMARK

% 560030 F-N-R CONTROL HANDLE ASSY. ....................... 1 ...................... INCLUDES ITEMS W/

1
2

% 560028-6 SCREW, #6-32 X 3/8 5

*

% 5600028-8 WASHER, FLAT #4 NYLON 5

3

*

4

% 560028-4 RUBBER BOOT 2

*

% 560028-3 PLATE, SIDE SWITCH 1

5

*

6

% 560028-5 SWITCH ASSEMBLY 2

*

% 560028-1 HANDLE HOUSING 1

7

*

8

% 60118 WIRE, F-N-R 1

*

% 925381 SCREW, SET 1/4-20 X 3/8 1

9

*

10

% 560028-2 PLATE, FRONT SWITCH 1

*

12 25627 F-N-R CONTROL ASSY...................................... 1 ...................... INCLUDES ITEMS W/

13% 405070 SEAL, WEATHERPACK, RED 4
14% 12223 TERMINAL WEATHERPACK 4
15% 405046 CONNECTOR, TERMINAL, MALE 4
16 6904 NUT, HEX FINISH 1/4-28 ZINC 4
17 580001 ROD END, 1/4-20 FEMALE RH 2
18 440006 CABLE, CONTROL 40" X 2" STROKE 1
19 120077 MOUNT W/A TRANSAXLE CTRL. CABLE 1
20 565006 SPRING, CTRL. CABLE TENSIONING 1
21 915003 SCREW, HHC 1/4-20 X 3/4 GRD. 8 1
22 584044 RETAINER, FNR CABLE SPRING 1
23 2295 SCREW, HHC 1/4-20 X 7/8 1
24 440005 PLATE, F-N-R PINTLE CONTROL 1
25 933240 WASHER, FLAT SAE 1/4" GRD. 9 1

*

%

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 19

SP-6057 CONCRETE SAW — JOYSTICK MOUNTING ASSY.

JOYSTICK MOUNTING ASSY.

PAGE 20 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — JOYSTICK MOUNTING ASSY.

JOYSTICK MOUNTING ASSY.

NO PART NO PART NAME QTY. REMARK

1

*

2

*

3

*

4

*

5

*

6

*

7

*

8

*

9

*

10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

26 35122 F-N-R MOUNTING ASSY. ..........................1 ................ INCLUDES ITEMS W/

0161D NUT, HEX FINISH 5/16-18 2
10019 NUT, FYLOC #10-32 1
1579 SCREW. JJC 1/4-20 X .5 1
2203 WASHER, FLAT, #10 4
405053 CORD GRIP, SAW FNR CONTROL 1
442005-6 BOOT, FNR CONTROL HANDLE 1
442006-3 SPACER, F-N-R 1
442011 BELLCRANK, SAW F-N-R 1
442012 PLATE, NEUTRAL DETENT 1
442013 F-N-R MOUNTING PLATE 1

*

442021 CONTROL LEVER 1

*

442022 SPACER, F-N-R DELRIN 1

*

460018 CAM ROLLER, SAW FNR CONTROL 1

*

565005 EXTENSION SPRING F-N-R CONTROL 1

*

584021 DENTENT BALL, SAW FNR CONTROL 1

*

584023 PIN, LONG SPRING HANGER 1

*

584024 PIN, SHORT SPRING HANGER 1

*

926348 SCREW, SHOULDER 3/8-16 X 3/4 1

*

933015 FRICTION DISC, SAW F-N-R 1

*

933073 1/2 X 1-1/4 BELLEVILLE WASHER 3

*

933225 WASHER, FENDER 1/2 X 1-1/2 ZINC 1

*

933240 WASHER, FLAT 1/4 SAE 1

*

933242 WASHER, FLAT 3/8 SAE 1

*

938062 LOCKNUT 3/8-16 YZ 2

*

973735 SCREW, BHSC 10-24X1-SS 4

*

*

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 21

WATER SYSTEM ASSY.

SP-6057 CONCRETE SAW — WATER SYSTEM ASSY.

PAGE 22 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — WATER SYSTEM ASSY.

WATER SYSTEM ASSY.

NO PART NO PART NAME QTY. REMARKS

1 446004 VALVE, BALL, 1/2 BRASS 2
2 25827 FITTING, BRASS (F) 3/4 GHT SWIVEL 1/2 MNPT 1
3 26496 FITTING, 90 1/2MP- 1/2FP 1
4 320009 FITTING, QD FEM SNAPTITE PHC4 - 4F 1
5 25931 FITTING, 90 8BARB - 1/2 MP (4390-8-8) 4
6 35087 HOSE, 3.25" #8LP 1
7 35085 HOSE, ASM 114.3" #8LP W/25932/25931 1
8 35086 HOSE, 17" #8LP 1
9 923143 SCREW, SHC 10-24 x 3/8" 4

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 23

SP-6057 CONCRETE SAW — PULLEY AND V-BELT ASSY.

PULLEY AND V-BELT ASSY.

PAGE 24 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — PULLEY AND V-BELT ASSY.

PULLEY AND V-BELT ASSY.

NO PART NO PART NAME QTY. REMARKS

1 540046 PULLEY, BLADESHAFT 3V 4.2 10G .............................. 1 ......... 16" BLADE

1 540035 PULLEY, BLADESHAFT 3V 4.7 10G .............................. 1 ......... 20" BLADE

1 540041 PULLEY, BLADESHAFT 3V 5.0 10G .............................. 1 ......... 26 & 30" BLADE

1 540041 PULLEY, BLADESHAFT 3V 5.3 10G .............................. 1 ......... 30" BLADE

1 540047 PULLEY, BLADESHAFT 3V 5.6 10G .............................. 1 ......... 36" BLADE

2 25630 PULLEY, ENGINE ASSY. ................................................ 1 ......... 16" BLADE, INCLUDES ITEMS W/#

2 25635 PULLEY, ENGINE ASSY. ................................................ 1 ......... 20" BLADE, INCLUDES ITEMS W/+

2 25556 PULLEY, ENGINE ASSY. ................................................ 1 ......... 26, 30 & 36" BLADES, INCLUDES ITEMS W/%

3 10057-061 KEY, 1/2" SQ X 3-1/2" 1

4 460023 BUSHING, TAPER-LOCK 2012 X 1-7/8 .......................... 1 ......... 16" BLADE ONLY

4 460016 BUSHING, TAPER-LOCK 2517 X 1-7/8 .......................... 1 ......... 20, 26, 30 & 36 BLADES

5 544004 CAP, SAW PTO 1
6 261002-1 ADAPTER PLATE, DEUTZ ENGINE 1
7 544005 FLANGE, SPLINED, DRIVE 1
8 544006 SHAFT, SPLINED, PRIMARY SAW DRIVE 1
9 544008 FLANGE, SPLINED,DRIVEN 1

10 25557 BELT TENSIONER ASSY................................................ 1 ......... INCLUDES ITEMS W/@

11 120232 MOUNT W/A, BELT TENSIONER 1

12 13016 BELT DRIVE JACKSHAFT ASSY. ................................... 1 ......... INCLUDES ITEMS W/$

13 520007 V-BELT, 5G 3 VX 530 MATCHMAKER ............................ 2 ......... ALL MODELS

14 521007 V-BELT, AX-42 ................................................................ 1 ......... ALL MODELS

15 521004 V-BELT, AX-38 ................................................................ 1 ......... 16", 20" AND 26" ONLY

15 521011 V-BELT, AX-39 ................................................................ 1 ......... 30" AND 36" BLADES

16 940694 SCREW, HHC M10-1.5x30MM FT 10.9 NP 8
17 933245 WASHER, FLAT SAE 9/16 GRD 9 YZ 8
18 915103 SCREW, HHC 3/8-16x3/4 GR8 YZ 2
19 938422 SCREW, HHC M10-1.0x50MM 10.9 NP 8
20 939978 SCREW, FHSC M10-1.5 x 25MM NP 3
21 923203 SCREW, SHC 1/4-20 x 3/4 8
22 924200 SCREW, FHSC 10-24 x 5/8 NP 4
23$ 540030 PULLEY, 4.125 x .750 1A 2
24$ 925437 SCREW, SHS,CP 5/16-18 x 3/8 4
25$ 576003 SNAP RING - HO-185 2
26$ 460021 BEARING, ROLLER # 6204 2RS 2
27$ 106097 JACKSHAFT ARM W/A 1
28$ 584013 KEY, 3/16 SQ x 1.0 2
29$ 167005 JACKSHAFT, SAW BELT DRIVE 1
30$ 10307 SCREW, HHC 1/2-13 X 5 1
31$ 933244 WASHER, FLAT SAE 1/2 GRD 9 YZ 2
32$ 960102 FITTING, GREASE ZERK STR 1/8 MP 1
33$ 10176 NUT, NYLOC 1/2-13 1
34#+% 915003 SCREW, HHC 1/4-20 x 3/4 GRD 8 8
35#+% 544007 BEARING SUPPORT, CONCRETE SAW PTO 1
36#+% 576013 SNAP RING, HO 268 1
37#+% 460022 BEARING, 6909 2RS 5
38#+% 576014 SNAP RING, SH 177 1

39# 540063 PULLEY, 4.45 10G 3V X 4.0 1A ...................................... 1 ......... 16" MODEL

39+ 540062 PULLEY, 4.1 10G 3V X 4.0 1A ........................................ 1 ......... 20" MODEL

39% 540058 PULLEY, 3.6 10G 3V X 4.0 1A ........................................ 1 ......... 26, 30 & 36" MODELS

40@ 3214 SCREW, HHC 1/2-13 X 1 1/4 1
41@ 933244 WASHER, FLAT SAE 1/2 GRD 9 YZ 2
42@ 448000 TENSIONER, IDLER ARM 1
43@ 544001 ADAPTOR, SHOULDER, FENNER DRIVE 1
44@ 25716 SCREW, MODIFIED 1/2-13 X 1 3/4 1
45@ 540003 PULLEY, W/BRG. 4" A SECTION 1
46 933242 WASHER, FLAT SAE 3/8 GRD 9YZ 2

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 25

SP-6057 CONCRETE SAW — DEPTH STOP METER/CABLE ASSY.

DEPTH STOP METER/CABLE ASSY.

PAGE 26 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — DEPTH STOP METER/CABLE ASSY.

DEPTH STOP METER/CABLE ASSY.

NO PART NO PART NAME QTY. REMARKS

1 25538 DEPTH METER ASSY. ...................................................... 1 ...... INCLUDES ITEMS W/

2

*

3

*

4

*

5

*

6

*

7

*

8

*

9

*

10
11
12
13
14
15 0131 A SCREW, HHC 1/4-20 X 3/4 1
16 1579 SCREW, HHC 1/4-20 x 1/2 1
18 120243 TAB W/A, DEPTH INDICATOR 1
19 923116 SCREW, SHC 8-32 x 3/4 2
20 160013 AXLE, INDICATOR SHEAVE 1
21 13287 NUT, NYLOC 8-32 2
22 440012 CABLE, DEPTH INDICATOR 1
23 565004 SPRING, EXTENSION, DEPTH INDICATOR 1

560025 KNOB, SAW DEPTH INDICATOR 1
584025 STUD, 1/4-20X1 3/4" B7 NO PLATE 1
110031 POINTER, CONCRETE SAW DEPTH 1
583059 SHIM, 0.375 OD x 0.251 ID x 0.020 THICK 5
460019 FLANGE BEARING, 0.25 ID X 0.75 OD 1
973752 SCREW, BHSC,1/4-20 x 5/8 SS 1
1618 NUT, NYLOC 10-24 3
125039 U-BRACKET W/A, SAW DEPTH INDICATOR 1
540011 PULLEY, CABLE 1.25 OD 8

*

926149 SCREW, SHDLR 1/4D X 5/16L ,10-24,SCKT HD 6

*

933240 WASHER, FLAT SAE 1/4 GRD 9 YZ 4

*

10024 NUT, NYLOC 1/4-20 2

*

923201 SCREW, SHC 1/4-20 x 1/2 1

*

*

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 27