Multiquip SP605716, SP605726, SP605720, SP605736, SP605730 User Manual

Download

PARTS MANUAL

Diamond Back

SP4 "STREET PRO"

PROFESSIONAL SLAB SAW

57 HP DEUTZ DIESEL ENGINE

MODELS

SP605716, SP605720, SP605726

SP605730, SP605736

Revision #0 (03/22/06)

To find the latest revision of this

publication, visit our website at:

www.multiquip.com

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

SP-6057 CONCRETE SAW — PROPOSITION 65 WARNING

PAGE 2 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — SILICOSIS/RESPIRATORY WARNINGS

WARNING

SILICOSIS WARNING RESPIRATORY HAZARDS

Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks. Repeated and/or substantial inhalation of airborne crystalline silica can cause serious or fatal respiratory diseases, including silicosis. In addition, California and some other authorities have listed respirable crystalline silica as a substance known to cause cancer. When cutting such materials, always follow the respiratory precautions mentioned above.

WARNING

Grinding/cutting/drilling of masonry, concrete, metal and other materials can generate dust, mists and fumes containing chemicals known to cause serious or fatal injury or illness, such as respiratory disease, cancer, birth defects or other reproductive harm. If you are unfamiliar with the risks associated with the particular process and/or material being cut or the composition of the tool being used, review the material safety data sheet and/or consult your employer, the material manufacturer/supplier, governmental agencies such as OSHA and NIOSH and other sources on hazardous materials. California and some other authorities, for instance, have published lists of substances known to cause cancer, reproductive toxicity, or other harmful effects.

Control dust, mist and fumes at the source where possible. In this regard use good work practices and follow the recommendations of the manufacturers or suppliers, OSHA/NIOSH, and occupational and trade associations. Water should be used for dust suppression when wet cutting is feasible. When the hazards from inhalation of dust, mists and fumes cannot be eliminated, the operator and any bystanders should always wear a respirator approved by NIOSH/MSHA for the materials being used.

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 3

TABLE OF CONTENTS

MQ SP4 “Street Pro”

Professional Slab Saw

Proposition 65 Warning ............................................. 2

Silicosis/Respiratory Warnings .................................. 3

Table Of Contents ..................................................... 4

Parts Ordering Procedures ....................................... 5

Explanation Of Codes In Remarks Column .............. 6

Suggested Spare Parts ............................................. 7

Component Drawings

Deck/Gauge Panel Assembly................................. 8-9

Nameplate and Decals Assembly ...................... 10-11

Access Panel Assembly ..................................... 12-13

Fuel Tank Assembly ........................................... 14-15

Lift Pump Circuit Assembly ................................ 16-17

F-N-R Control Handle Assembly........................ 18-19

Joystick Mounting Assembly .............................. 20-21

Water System Assembly .................................... 22-23

Pulley and V-Belt Assembly................................ 24-25

Depth Stop Meter/Cable Assembly .................... 26-27

Depth Stop Cylinder/Valve Assembly ................. 28-29

Belt Guard .......................................................... 30-31

Engine Assembly ............................................... 32-33

Air Intake Hose Assembly .................................. 34-35

Muffler Kit Assembly .......................................... 36-37

Engine Mounting ................................................ 38-39

Pointer Assembly ............................................... 40-41

Gauges and Controls Assembly ........................ 42-43

Battery Assembly ............................................... 44-45

Front Axle Assembly .......................................... 46-47

Drive Assembly .................................................. 48-49

Bladeshaft and Mounting Assembly .................. 50-51

Light Connector/Dash Panel Assembly.............. 52-53

Engine Guard Assembly .................................... 54-55

Blade Guard Mount/ Wiper Assembly ................ 56-57

Lower Belt Guard Assembly .............................. 58-59

Handle and Light Assembly ............................... 60-61

Rear Point and Foot Rest Assembly .................. 62-63

Console Mounting Assembly ............................. 64-65

Cable Mount Assembly ...................................... 66-67

Optional Flange Guard Assembly ...................... 68-69

Blade Guard Assembly ...................................... 70-71

Wiring Harness/Circuit Breaker Assembly ......... 72-73

Water Pump Kit Assembly .................................. 74-75

Glow Plug Kit Assembly ..................................... 76-77

Bladeshaft Seal Kit Assembly ............................ 78-79

Bushing Extension Kits Assembly ..................... 80-81

Engine Block Heater Assembly (Option) ............ 82-83

Collar/Flange Puller Assembly (Option) ............. 84-85

Seal Sleeve Puller Assembly ............................. 86-87

Seal Sleeve Puller Assembly ............................. 88-89

PAGE 4 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

Effective: June 1st, 2005

Ordering parts has never been easier!

PARTS ORDERING PROCEDURES

Choose from three easy options:

Best Deal!

Order via Internet (Dealers Only):

Order parts on-line using Multiquip’s SmartEquip website!

■

View Parts Diagrams

■

Order Parts

■

Print Specification Information

Goto www.multiquip.com and click on

Order Par ts

to log in and save!

Order via Fax (Dealers Only):

All customers are welcome to order parts via Fax.

Domestic (US) Customers dial:

1-800-6-PARTS-7 (800-672-7877)

Non-Dealer Customers:

Contact your local Multiquip Dealer for parts or call 800-427-1244 for help in locating a dealer near you.

Order via Phone:

If you have an MQ Account, to obtain a Username and Password, E-mail us at:

parts@multiquip.com.

To obtain an MQ Account, contact your District Sales Manager for more information.

Use the

internet

Standard orders

complete part numbers.*

Fax

your order in and qualify for a 3% Discount

Standard orders

complete part numbers.*

Domestic (US) Dealers Call:

1-800-427-1244

and qualify for a 5% Discount

for all orders which include

International Customers

their local Multiquip Representatives for Parts Ordering information.

Note: Discounts Are Subject To Change

should contact

❒❒

❒

❒❒

❒

❒❒

❒

❒❒

❒

❒❒ ❒❒

❒

❒❒

❒

❒❒

www.multiquip.com

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 5

When ordering parts, please supply:

❒❒

Dealer Account Number

Dealer Name and Address

Shipping Address (if different than billing address)

Return Fax Number Applicable Model Number

Quantity, Part Number and Description of Each Part

NOTE

Unless otherwise indicated by customer, all orders are treated as within 24 hours. We will make every effort to ship if received prior to 2PM PST.

WE ACCEPT ALL MAJOR CREDIT CARDS!

❒

❒❒

Stock Orders

Specify Preferred Method of Shipment:

✓

Fed Ex/UPS

■

Priority One

■

Ground

■ Next Day

■

Second/Third Day

Air Shipments

must be noted on fax or web order form.

✓ DHL ✓

Tr u ck

Standard Orders

the same day the order is received,

and will ship

SP-6057 — EXPLANATION OF CODE IN REMARKS COLUMN

The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions.

The contents and part numbers listed in the parts section are subject to change guarantee the availibility of the parts listed.

Sample Parts List:

NO. PART NO. PART NAME QTY. REMARKS

1 12345 BOLT ....................... 1 .... INCLUDES ITEMS W/

2*12347 WASHER, 3/8 IN. .... 1....

3 12348 HOSE .................... A/R .. MAKE LOCALLY

4 12349 BEARING ................ 1 .... S/N 2345B AND ABOVE

NO. Column

Unique Symbols - All items with same unique symbol

, #, +, %, or >) in the number column belong to the same

(

assembly or kit, which is indicated by a note in the “Remarks” column.

Duplicate Item Numbers - Duplicate numbers indicate multiple part numbers are in effect for the same general item, such as different size saw blade guards in use or a part that has been updated on newer versions of the same machine.

NOTE

without notice

WASHER, 1/4 IN. ...........

When ordering a part that has more than one item number listed, check the remarks column for help in determining the proper part to order.

. Multiquip does not

NOT SOLD SEPARATELY MQ-45T ONLY

QTY. Column

Numbers Used - Item quantity can be indicated by a number,

a blank entry, or A/R. A/R (As Required) is generally used for hoses or other parts

that are sold in bulk and cut to length. A blank entry generally indicates that the item is not sold

separately. Other entries will be clarified in the “Remarks” Column.

REMARKS Column

Some of the most common notes found in the “Remarks”

Column are listed below. Other additional notes needed to describe the item can also be shown.

Assembly/Kit

symbol will be included when this item is purchased. Indicated by:

“INCLUDES ITEMS W/(unique symbol)”

Serial Number Break

range where a particular part is used. Indicated by:

“S/N XXXXX AND BELOW” “S/N XXXX AND ABOVE” “S/N XXXX TO S/N XXX”

Specific Model Number Use

only with the specific model number or model number variant listed. It can also be used to show a part is NOT used on a specific model or model number variant.

Indicated by:

“XXXXX ONLY” “NOT USED ON XXXX”

- All items on the parts list with the same unique

- Used to list an effective serial number

- Indicates that the part is used

PART NO. Column

Numbers Used - Part numbers can be indicated by a number,

a blank entry, or TBD. TBD (To Be Determined) is generally used to show a part that

has not been assigned a formal part number at time of publication.

A blank entry generally indicates that the item is not sold separately or is not sold by Multiquip. Other entries will be clarified in the “Remarks” Column.

PAGE 6 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

“Make/Obtain Locally”

purchased at any hardware shop or made out of available items. Examples include battery cables, shims, and certain washers and nuts.

“Not Sold Separately”

purchased as a separate item and is either part of an assembly/kit that can be purchased, or is not available for sale through Multiquip.

- Indicates that the part can be

- Indicates that an item cannot be

SP-6057 CONCRETE SAW — SUGGESTED SPARE PARTS

SP-6057 CONCRETE SAW

1 to 5 Units

Qty. ..... P/N ......................... Description

1 ......... 345008 .................... Coupler, Splined

1 ......... 446010 .................... Valve, Cartridge

1 ......... 560028-5 ................. Switch Assembly

1 ......... 521004 .................... V-Belt (16", 20" and 26" only)

1 ......... 521001 .................... V-Belt (30" and 36" only)

1 ......... 521007 .................... V-Belt All Models

2 ......... 520007 .................... 5G 3VX 530 drive belt

1 ......... 300008 .................... Primary Air Filter Element

1 ......... 300009 .................... Safety Air Filter Element

1 ......... 306006 .................... Transaxle Hydraulic Filter

2 ......... 500009 .................... Wheel, Rear Axle

2 ......... 582038 .................... Bushing, Rear Wheel

2 ......... 180003 .................... Outer Flange

2 ......... 180004 .................... Inner Flange

1 ......... 582012 .................... Bushing, Flange

1 ......... 915316 .................... Screw, HHC 5/8-11 x 3 LH Gr8

1 ......... 915315 .................... Screw, HHC 5/8-11 x 3 RH Gr8

1 ......... 577009 .................... Gasket, Drain Plug

1 ......... 306012 .................... Engine Oil Filter, Deutz

1 ......... 304010 .................... Engine Fuel Filter, Deutz

1 ......... 362002 .................... Tube, B.G. Water Delivery R.H.

1 ......... 362003 .................... Tube, B.G. Water Delivery L.H.

1 ......... 25643 ..................... Relief Check Valve

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 7

SP-6057 CONCRETE SAW — DECK/GAUGE PANEL ASSY.

DECK PANEL DECAL ASSY.

PAGE 8 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — DECK/GAUGE PANEL ASSY.

DECK/GAUGE PANEL ASSY.

NO PART NO PART NAME QTY. REMARKS

1 600151 GAUGE PANEL, 6000 SERIES 1 2 600152 DECK PANEL, 6000 SERIES 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 9

SP-6057 CONCRETE SAW — NAMEPLATE AND DECALS ASSY.

NAMEPLATE AND DECAL ASSY.

PAGE 10 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — NAMEPLATE AND DECALS ASSY.

NAMEPLATE AND DECAL ASSY.

NO PART NO PART NAME QTY. REMARKS

1 25250-001 DECAL, WARNING, KEEP FEET CLEAR 2 2 606004 DECAL, BLADE GUARD REMOVAL 2 3 25782 DECAL, MQ DIAMOND LOGO 4

4 21302 DECAL, WARNING, INSTALL BLADE GUARD ............ 1 .............. REPLACES P/N 606004

5 TBD DECAL, SP4 LOGO 2 6 13118 DECAL, POWDER COATED 1 7 35137 DECAL, WARNING, READ MANUAL 1

8 DECAL, NAMEPLATE .................................................. 1.............. CONTACT MQ PARTS DEPT.

9 M600002 DECAL, DIESEL FUEL ONLY 1 10 22122-001 DECAL, WARNING, SERIOUS INJURY 1 11 25249-001 DECAL, WARNING, KEEP HANDS CLEAR 2 12 23330-001 DECAL, CAUTION, DRIVE BELT 1 13 25491 DECAL, ROTATION, CW 1 14 20525 DECAL, WARNING, PROPOSITION 65 1 15 604001 DECAL, WARNING, INSTALL BELT GUARD 1 16 25678 DECAL, ROTATION, CCW 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 11

ACCESS PANEL ASSY.

SP-6057 CONCRETE SAW — ACCESS PANEL ASSY.

PAGE 12 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — ACCESS PANEL ASSY.

ACCESS PANEL ASSY.

NO PART NO PART NAME QTY. REMARKS

1 102039 PANEL ASSY., REAR CONSOLE, RED ........................ 1 ................. INCLUDES ITEMS W/

9 29093 GASKET, TRIMLOCK X-109BT 2

560020 LATCH, REAR SAW ACCESS PANEL 2 12287 SCREW, THP 1/4-20 X 3/4" SS 4 102039-1 PANEL, REAR CONSOLE 6000, RED 1 577002 WEATHER STRIP, REAR SAW ACCESS PANEL 1.75 FT. 29057 DOCUMENT BOX, CP90007-07 1 10024 NUT, NYLOCK 1/4-20 4 10930 WASHER, FENDER, 1/4 X 1-1/4" 4

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 13

FUEL TANK ASSY.

SP-6057 CONCRETE SAW — FUEL TANK ASSY.

PAGE 14 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — FUEL TANK ASSY.

FUEL TANK ASSY.

NO PART NO PART NAME QTY. REMARK

9 25553 FUEL TANK ASSY. ......................................................... 1 ................. INCLUDES ITEMS W/

10 102041 PLATFORM W/A SAW FUEL TANK 1 11 933242 WASHER, FLAT SAE 3/8" GRADE 9 5 12 0166 SCREW, HHC 3/8-16" X 7/8" 5

140004 FUEL TANK, 6000 & 6400 10 GAL 1 29509 CAP, FUEL TANK 2.25 DIA, ONE WAY VALVE 1 19633 BUSHING, RUBBER FUEL DAPCO 10672 2 368006 FITTING, FUEL 90 DEG. #4 X #6 BARB 1 35009 HOSE, 22.5" - 5/16" FUEL LINE 1 19473 CLAMP, HOSE WORM # 2 4 35007 HOSE, 26.5" - 1/4" FUEL LINE 1 446025 VALVE, FUEL ON/OFF 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 15

LIFT PUMP CIRCUIT ASSY.

SP-6057 CONCRETE SAW — LIFT PUMP CIRCUIT ASSY.

PAGE 16 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — LIFT PUMP CIRCUIT ASSY.

LIFT PUMP CIRCUIT ASSY.

NO PART NO PART NAME QTY. REMARK

1 340010 PUMP ASSY., HYDRAULIC LIFT .................................... 1........... INCLUDES ITEMS W/

2 35255 SOLENOID ASSY., LIFT PUMP ...................................... 1........... INCLUDES ITEMS W/

3 446009 SOLENOID VALVE ASSY., SAW LIFT............................. 1 ........... INCLUDES ITEMS W/#

4 25542 CYLINDER ASSY., SAW LIFT ......................................... 1........... INCLUDES ITEMS W/%

5 21095 FITTING, STR 4MJ - 4MO 3 6 25758 FITTING, ORIFICE 4MJ - 4MO X .026 1 7 368817 FITTING, 90 4MJ - 4MO 2 8 25941 FITTING BRANCH TOP SWIVEL 4MJ - 4MJ - 4FJ 1 9 366690 FITTING, TEE RUN 4MJ - 4MJ - 4FJ 1 10 35001 HOSE ASSY. 13.2" #4HP W/370821/370895 1 11 35002 HOSE ASSY. 13.7" #4HP W/370821/370821 1 12 35003 HOSE ASSY. 19.7" #4HP W/370821/370821 1 13 35008 HOSE ASSY., 63.5" #4LP W/370670/370895 1

14 570050 CLAMP ASSY., #4 SINGLE HOSE .................................. 2 ........... INCLUDES ITEMS W/+

15 169000 PIN, CYLINDER ROD END 2 16 06500-007 SCREW, HHC 5/16-18 x 7/8 2 17 933241 WASHER, FLAT SAE 5/16 GRD 9 YZ 4 18 4683 SCREW, HHC 5/16-18 X 5/8 2 19 2203 WASHER, FLAT, #10 2 20 923186 SCREW, SHC 12-24 X 3/4 2 21 933240 WASHER, FLAT SAE 1/4 GRD 9 YZ 6 22 2508 SCREW, HHC 1/4-20 x 2-1/4 2 23 24 25 26 27# 444014 CATRIDGE BODY 1 28# 446010 VALVE CARTRIDGE 1 29# 405070 SEAL, WEATHERPACK, 20-22 GA RED 2 30# 446029 COIL, 12 VDC CARTRIDGE VALVE 1 32# 405035 PLUG-SEAL WEATHER PACK GREEN 1 33# 405066 CONNECTOR, WEATHERPACK 3 PIN MALE 1 34% 480003 SEAL, OIL CR #9815 4 35% 2621 FITTING, GREASE ZERK STR. 1/4-28 2 36% 447005 CYLINDER LIFT, 1.75 X 4.120 1 37+ 5277 HHC 1/4-20 X 1-1/2 4 38 39 40 41 42 43 44

12171 SEAL, WEATHERPACK, 16-18 GA GREEN 2

# 12179 TERMINAL, WEATHERPACK , MALE 14-16 GA 4

12176 CONNECTOR, WEATHERPACK 2 PIN MALE 1

25628 SOLENOID, LIFT PUMP 1

340030 1200 WATT MOTOR ASSY. 1

345006 SPLINED COUPLER 1

25659 ADAPTER 1

25660 HYDRAULIC PUMP 1

25643 RELIEF CHECK VALVE 1

147006 FENNER SMALL FILLER CAP 1

144010 .5L MICROPACK TANK 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 17

SP-6057 CONCRETE SAW — F-N-R CONTROL AND HANDLE ASSY.

F-N-R CONTROL AND HANDLE ASSY.

PAGE 18 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — F-N-R CONTROL AND HANDLE ASSY.

F-N-R CONTROL AND HANDLE ASSY.

NO PART NO PART NAME QTY. REMARK

% 560030 F-N-R CONTROL HANDLE ASSY. ....................... 1 ...................... INCLUDES ITEMS W/

1 2

% 560028-6 SCREW, #6-32 X 3/8 5

% 5600028-8 WASHER, FLAT #4 NYLON 5

% 560028-4 RUBBER BOOT 2

% 560028-3 PLATE, SIDE SWITCH 1

% 560028-5 SWITCH ASSEMBLY 2

% 560028-1 HANDLE HOUSING 1

% 60118 WIRE, F-N-R 1

% 925381 SCREW, SET 1/4-20 X 3/8 1

% 560028-2 PLATE, FRONT SWITCH 1

12 25627 F-N-R CONTROL ASSY...................................... 1 ...................... INCLUDES ITEMS W/

13% 405070 SEAL, WEATHERPACK, RED 4 14% 12223 TERMINAL WEATHERPACK 4 15% 405046 CONNECTOR, TERMINAL, MALE 4 16 6904 NUT, HEX FINISH 1/4-28 ZINC 4 17 580001 ROD END, 1/4-20 FEMALE RH 2 18 440006 CABLE, CONTROL 40" X 2" STROKE 1 19 120077 MOUNT W/A TRANSAXLE CTRL. CABLE 1 20 565006 SPRING, CTRL. CABLE TENSIONING 1 21 915003 SCREW, HHC 1/4-20 X 3/4 GRD. 8 1 22 584044 RETAINER, FNR CABLE SPRING 1 23 2295 SCREW, HHC 1/4-20 X 7/8 1 24 440005 PLATE, F-N-R PINTLE CONTROL 1 25 933240 WASHER, FLAT SAE 1/4" GRD. 9 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 19

SP-6057 CONCRETE SAW — JOYSTICK MOUNTING ASSY.

JOYSTICK MOUNTING ASSY.

PAGE 20 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — JOYSTICK MOUNTING ASSY.

JOYSTICK MOUNTING ASSY.

NO PART NO PART NAME QTY. REMARK

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

26 35122 F-N-R MOUNTING ASSY. ..........................1 ................ INCLUDES ITEMS W/

0161D NUT, HEX FINISH 5/16-18 2 10019 NUT, FYLOC #10-32 1 1579 SCREW. JJC 1/4-20 X .5 1 2203 WASHER, FLAT, #10 4 405053 CORD GRIP, SAW FNR CONTROL 1 442005-6 BOOT, FNR CONTROL HANDLE 1 442006-3 SPACER, F-N-R 1 442011 BELLCRANK, SAW F-N-R 1 442012 PLATE, NEUTRAL DETENT 1 442013 F-N-R MOUNTING PLATE 1

442021 CONTROL LEVER 1

442022 SPACER, F-N-R DELRIN 1

460018 CAM ROLLER, SAW FNR CONTROL 1

565005 EXTENSION SPRING F-N-R CONTROL 1

584021 DENTENT BALL, SAW FNR CONTROL 1

584023 PIN, LONG SPRING HANGER 1

584024 PIN, SHORT SPRING HANGER 1

926348 SCREW, SHOULDER 3/8-16 X 3/4 1

933015 FRICTION DISC, SAW F-N-R 1

933073 1/2 X 1-1/4 BELLEVILLE WASHER 3

933225 WASHER, FENDER 1/2 X 1-1/2 ZINC 1

933240 WASHER, FLAT 1/4 SAE 1

933242 WASHER, FLAT 3/8 SAE 1

938062 LOCKNUT 3/8-16 YZ 2

973735 SCREW, BHSC 10-24X1-SS 4

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 21

WATER SYSTEM ASSY.

SP-6057 CONCRETE SAW — WATER SYSTEM ASSY.

PAGE 22 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — WATER SYSTEM ASSY.

WATER SYSTEM ASSY.

NO PART NO PART NAME QTY. REMARKS

1 446004 VALVE, BALL, 1/2 BRASS 2 2 25827 FITTING, BRASS (F) 3/4 GHT SWIVEL 1/2 MNPT 1 3 26496 FITTING, 90 1/2MP- 1/2FP 1 4 320009 FITTING, QD FEM SNAPTITE PHC4 - 4F 1 5 25931 FITTING, 90 8BARB - 1/2 MP (4390-8-8) 4 6 35087 HOSE, 3.25" #8LP 1 7 35085 HOSE, ASM 114.3" #8LP W/25932/25931 1 8 35086 HOSE, 17" #8LP 1 9 923143 SCREW, SHC 10-24 x 3/8" 4

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 23

SP-6057 CONCRETE SAW — PULLEY AND V-BELT ASSY.

PULLEY AND V-BELT ASSY.

PAGE 24 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — PULLEY AND V-BELT ASSY.

PULLEY AND V-BELT ASSY.

NO PART NO PART NAME QTY. REMARKS

1 540046 PULLEY, BLADESHAFT 3V 4.2 10G .............................. 1 ......... 16" BLADE

1 540035 PULLEY, BLADESHAFT 3V 4.7 10G .............................. 1 ......... 20" BLADE

1 540041 PULLEY, BLADESHAFT 3V 5.0 10G .............................. 1 ......... 26 & 30" BLADE

1 540041 PULLEY, BLADESHAFT 3V 5.3 10G .............................. 1 ......... 30" BLADE

1 540047 PULLEY, BLADESHAFT 3V 5.6 10G .............................. 1 ......... 36" BLADE

2 25630 PULLEY, ENGINE ASSY. ................................................ 1 ......... 16" BLADE, INCLUDES ITEMS W/#

2 25635 PULLEY, ENGINE ASSY. ................................................ 1 ......... 20" BLADE, INCLUDES ITEMS W/+

2 25556 PULLEY, ENGINE ASSY. ................................................ 1 ......... 26, 30 & 36" BLADES, INCLUDES ITEMS W/%

3 10057-061 KEY, 1/2" SQ X 3-1/2" 1

4 460023 BUSHING, TAPER-LOCK 2012 X 1-7/8 .......................... 1 ......... 16" BLADE ONLY

4 460016 BUSHING, TAPER-LOCK 2517 X 1-7/8 .......................... 1 ......... 20, 26, 30 & 36 BLADES

5 544004 CAP, SAW PTO 1 6 261002-1 ADAPTER PLATE, DEUTZ ENGINE 1 7 544005 FLANGE, SPLINED, DRIVE 1 8 544006 SHAFT, SPLINED, PRIMARY SAW DRIVE 1 9 544008 FLANGE, SPLINED,DRIVEN 1

10 25557 BELT TENSIONER ASSY................................................ 1 ......... INCLUDES ITEMS W/@

11 120232 MOUNT W/A, BELT TENSIONER 1

12 13016 BELT DRIVE JACKSHAFT ASSY. ................................... 1 ......... INCLUDES ITEMS W/$

13 520007 V-BELT, 5G 3 VX 530 MATCHMAKER ............................ 2 ......... ALL MODELS

14 521007 V-BELT, AX-42 ................................................................ 1 ......... ALL MODELS

15 521004 V-BELT, AX-38 ................................................................ 1 ......... 16", 20" AND 26" ONLY

15 521011 V-BELT, AX-39 ................................................................ 1 ......... 30" AND 36" BLADES

16 940694 SCREW, HHC M10-1.5x30MM FT 10.9 NP 8 17 933245 WASHER, FLAT SAE 9/16 GRD 9 YZ 8 18 915103 SCREW, HHC 3/8-16x3/4 GR8 YZ 2 19 938422 SCREW, HHC M10-1.0x50MM 10.9 NP 8 20 939978 SCREW, FHSC M10-1.5 x 25MM NP 3 21 923203 SCREW, SHC 1/4-20 x 3/4 8 22 924200 SCREW, FHSC 10-24 x 5/8 NP 4 23$ 540030 PULLEY, 4.125 x .750 1A 2 24$ 925437 SCREW, SHS,CP 5/16-18 x 3/8 4 25$ 576003 SNAP RING - HO-185 2 26$ 460021 BEARING, ROLLER # 6204 2RS 2 27$ 106097 JACKSHAFT ARM W/A 1 28$ 584013 KEY, 3/16 SQ x 1.0 2 29$ 167005 JACKSHAFT, SAW BELT DRIVE 1 30$ 10307 SCREW, HHC 1/2-13 X 5 1 31$ 933244 WASHER, FLAT SAE 1/2 GRD 9 YZ 2 32$ 960102 FITTING, GREASE ZERK STR 1/8 MP 1 33$ 10176 NUT, NYLOC 1/2-13 1 34#+% 915003 SCREW, HHC 1/4-20 x 3/4 GRD 8 8 35#+% 544007 BEARING SUPPORT, CONCRETE SAW PTO 1 36#+% 576013 SNAP RING, HO 268 1 37#+% 460022 BEARING, 6909 2RS 5 38#+% 576014 SNAP RING, SH 177 1

39# 540063 PULLEY, 4.45 10G 3V X 4.0 1A ...................................... 1 ......... 16" MODEL

39+ 540062 PULLEY, 4.1 10G 3V X 4.0 1A ........................................ 1 ......... 20" MODEL

39% 540058 PULLEY, 3.6 10G 3V X 4.0 1A ........................................ 1 ......... 26, 30 & 36" MODELS

40@ 3214 SCREW, HHC 1/2-13 X 1 1/4 1 41@ 933244 WASHER, FLAT SAE 1/2 GRD 9 YZ 2 42@ 448000 TENSIONER, IDLER ARM 1 43@ 544001 ADAPTOR, SHOULDER, FENNER DRIVE 1 44@ 25716 SCREW, MODIFIED 1/2-13 X 1 3/4 1 45@ 540003 PULLEY, W/BRG. 4" A SECTION 1 46 933242 WASHER, FLAT SAE 3/8 GRD 9YZ 2

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 25

SP-6057 CONCRETE SAW — DEPTH STOP METER/CABLE ASSY.

DEPTH STOP METER/CABLE ASSY.

PAGE 26 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — DEPTH STOP METER/CABLE ASSY.

DEPTH STOP METER/CABLE ASSY.

NO PART NO PART NAME QTY. REMARKS

1 25538 DEPTH METER ASSY. ...................................................... 1 ...... INCLUDES ITEMS W/

10 11 12 13 14 15 0131 A SCREW, HHC 1/4-20 X 3/4 1 16 1579 SCREW, HHC 1/4-20 x 1/2 1 18 120243 TAB W/A, DEPTH INDICATOR 1 19 923116 SCREW, SHC 8-32 x 3/4 2 20 160013 AXLE, INDICATOR SHEAVE 1 21 13287 NUT, NYLOC 8-32 2 22 440012 CABLE, DEPTH INDICATOR 1 23 565004 SPRING, EXTENSION, DEPTH INDICATOR 1

560025 KNOB, SAW DEPTH INDICATOR 1 584025 STUD, 1/4-20X1 3/4" B7 NO PLATE 1 110031 POINTER, CONCRETE SAW DEPTH 1 583059 SHIM, 0.375 OD x 0.251 ID x 0.020 THICK 5 460019 FLANGE BEARING, 0.25 ID X 0.75 OD 1 973752 SCREW, BHSC,1/4-20 x 5/8 SS 1 1618 NUT, NYLOC 10-24 3 125039 U-BRACKET W/A, SAW DEPTH INDICATOR 1 540011 PULLEY, CABLE 1.25 OD 8

926149 SCREW, SHDLR 1/4D X 5/16L ,10-24,SCKT HD 6

933240 WASHER, FLAT SAE 1/4 GRD 9 YZ 4

10024 NUT, NYLOC 1/4-20 2

923201 SCREW, SHC 1/4-20 x 1/2 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 27

SP-6057 CONCRETE SAW — DEPTH STOP CYLINDER/VALVE ASSY.

DEPTH STOP CYLINDER/VALVE ASSY.

PAGE 28 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — DEPTH STOP CYLINDER/VALVE ASSY.

DEPTH STOP CYLINDER/VALVE ASSY.

NO PART NO PART NAME QTY. REMARK

1 25545 CYLINDER, SAW DEPTH STOP 1 2 169004 PIN, DEPTH STOP CYLINDER 1 3 966166 PIN, CLEVIS 3/4 x 2 1 4 965103 PIN, COTTER 5/32 x 1 1 5 583061 SPACER, DEPTH STOP CYLINDER 1 6 25632 FITTING, BLEEDER, DEPTH STOP 1 7 446024 VALVE, DEPTH STOP FLOW CONTROL 1 8 446024-1 PANEL MOUNT KIT, VALVE 1 9 35006 HOSE ASM, 36.2" #4HP w/ 370821/370821 1 10 368817 FITTING, 90 4MJ - 4MO 3 11 35004 HOSE ASM, 22.7" #4HP w/ 370895/370821 1 12 25675 FITTING, BRASS BREATHER VENT 1/4" 1 13 25776 FITTING, BRASS STR 2BARB-10-32 1 14 933247 WASHER, FLAT SAE 3/4 GRD 9 YZ 1 15 480003 SEAL, OIL CR# 9815 2

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 29

BELT GUARD

SP-6057 CONCRETE SAW — BELT GUARD

PAGE 30 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — BELT GUARD

BELT GUARD

NO PART NO PART NAME QTY. REMARK

1 204017 BELT GUARD W/A, CONCRETE SAW (RED) 1 2 125041 TAB W/A, SAW BELT GUARD 1 3 584011 WRENCH, 15/16" BLADE CLOSED END 1 4 15503 KNOB, COMFORT GRIP STAR, 3/8 - 16 X 1 1 5 0166 SCREW, HHC 3/8-16 X 7/8 6 6 933242 WASHER, FLAT SAE 3/8 GRD 9 YZ 7 7 1023 SCREW, HHC 3/8-16 X 1 1/4 GR 5 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 31

ENGINE ASSY.

SP-6057 CONCRETE SAW — ENGINE ASSY.

PAGE 32 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — ENGINE ASSY.

ENGINE ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 261002 ENGINE, DEUTZ BF3L 1011FL 57HP TURBO DIESEL .................... 1........ TIER I

1 35396 ENGINE, DEUTZ BF3L 2011 60HP TURBO DIESEL ........................ 1........ TIER II

5 306012 FILTER, OIL, DEUTZ 1 6 304010 FILTER, FUEL, DEUTZ 1 7 267002 FLYWHEEL, MODIFIED BF 3L 1011 FL 1 8 205007 PLATE, HANDLEBAR STOP 1 9 367681 FITTING, STR 8MJ-M18MO 1 10 366030 FITTING, PLUG 8MJ 1 11 35017 HOSE ASSY, 19.9” #8LP W/ 370677/370677 1 13 946703 SCREW, HHC M8-1.25 X 25MM GR10.9 1 15 933242 WASHER 1 16 TBD DIPSTICK 1 17 TBD OIL FILLER CAP 1 18 267009 BLOWER JACKET 57HP DEUTZ TD 04179632 1

NOTE

Tier I Deutz engine no longer available. Tier II Deutz engine replacement requires separate engine wiring harness, air intake assembly and breather tube (see next page).

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 33

AIR INTAKE HOSE ASSY.

SP-6057 CONCRETE SAW — AIR INTAKE HOSE ASSY.

PAGE 34 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — AIR INTAKE HOSE ASSY.

AIR INTAKE HOSE ASSY.

NO PART NO PART NAME QTY. REMARK

1 300010 AIR CLEANER, DONALDSON, W/90 DEG. BEND .................. 1 .......... INCLUDES ITEMS W/

2 300007-1 BAND, DONALDSON AIR CLEANER 1 3 282003 PREFILTER, ENGINE AIR 3" 1

4 29218 CLAMP, HOSE WORM #48 ...................................................... 4 .......... TIER I

4 29218 CLAMP, HOSE WORM #48 ...................................................... 3 .......... TIER II

5 25625 AIR INTAKE HOSE ASM 1 6 302009 HOSE, HUMP 3" x 2.75" 1 7 584036 TUBING, AIR CLEANER SPLICE 1 8 302012 TUBE, CRANCASE BREATHER, 57HP 1

9 962017 CLAMP, HOSE WORM # 36.....................................................1 .......... TIER I ONLY

10 3333 CLAMP, HOSE WORM # 12, 11/16" TO 1- 1/4" .................... 1 .......... TIER I ONLY

11 406018 INDICATOR, ELECTRICAL SERVICE 30" H2O/7.5KPa 1 12 65516 FITTING, NIPPLE 1/8" MP 1

15 35216 CLAMP, HOSE WORM # 10.....................................................1 .......... TIER I ONLY

16 933241 WASHER, FLAT SAE 5/16 GRD 9 YZ 4 17 2623 SCREW, HHC 5/16-18 x 1-1/4 2 18 5283 NUT, NYLOC 5/16-18 2 19 20 21 22

23 15538 CLAMP, HOSE WORM #6, 7/16-11/16 ..................................... 1 .......... TIER II ONLY

300010-1 BODY, AIR FILTER 1

300009 AIR FILTER, SAFETY ELEMENT 1

300008 AIR FILTER, PRIMARY ELEMENT 1

300010-2 CAP, AIR FILTER 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 35

MUFFLER KIT ASSY.

SP-6057 CONCRETE SAW — MUFFLER KIT ASSY.

PAGE 36 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — MUFFLER KIT ASSY

MUFFLER KIT ASSY.

NO PART NO PART NAME QTY. REMARK

1 280002 MUFFLER AND FLEX KIT ASSY. 1 2 285003 EXHAUST, 12" EXTENSION 1 3 570005 CLAMP, MUFFLER 2-1/2", 5/16" U-BOLT 1 4 106088 BRACKET W/A, DEUTZ MUFFLER SUPPORT 1 5 0300 B WASHER, FLAT SAE 5/16 2 6 280002 FLEX KIT 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 37

ENGINE MOUNTING ASSY.

SP-6057 CONCRETE SAW — ENGINE MOUNTING ASSY.

PAGE 38 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — ENGINE MOUNTING ASSY.

ENGINE MOUNTING ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

20 35335 ENGINE MOUNTING KIT ..................................................... 1 ....... INCLUDES ITEMS W/

25614 TRUNNION W/A, DEUTZ ENGINE 1

25640 TRUNNION W/A, CONCRETE SAW ENGINE FRONT 1

120274 MOUNT, ENGINE , RH REAR DEUTZ 1

120273 MOUNT,ENGINE, LH REAR DEUTZ 1

120271 SUPPORT ARM, RH DEUTZ ENGINE DRILLED 1

120270 SUPPORT ARM, LH DEUTZ ENGINE DRILLED 1

933245 WASHER, FLAT SAE 9/16 GRD 9 YZ 4

933244 WASHER, FLAT SAE 1/2 GRD 9 YZ 8

933247 WASHER, FLAT SAE 3/4 GRD 9 YZ 4

940738 SCREW, HHC M14-2.0X55MM 10.9 NP 4

915218 SCREW, HHC 1/2-13 X 3-3/4GRD8 2

16521 SCREW, HHC 1/2-13 X 4 GD8 2

915211 SCREW, HHC 1/2-13 X 2 GR8 YZ 4

915373 SCREW, HHC 3/4-10X5GRD 8 2

120099-3 TAP BOLT, 3/4-10 X 8 ZINC GR 8 1

938067 NUT, TOP LOCK 3/4-10 GR9 YZ 2

936216 NUT, HEX JAM 3/4-10, ZINC 1

583068 WASHER, 1.5 OD X .68 ID X .25 THICK 2

9503 NUT, NYLOC 5/8-11 2

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 39

POINTER ASSY.

SP-6057 CONCRETE SAW — POINTER ASSY.

PAGE 40 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — POINTER ASSY.

POINTER ASSY.

NO PART NO PART NAME QTY. REMARK

10 11 12 13 14 15 16 17 18

20 M10006 POINTER ASSY ...................................................................... 1 .......... INCLUDES ITEMS W/

120094 FRAME W/A, LH SAW POINTER 1 120095 FRAME W/A, RH SAW POINTER 1 110038 SAW POINTER, 15" LEFT FRONT 1 110044 POINTER, RIGHT FRONT 17 1/4" 1 15503 KNOB, COMFORT GRIP STAR, 3/8 - 16 X 1 2 500005 WHEEL, POINTER, 6"X1" 1 160004 AXLE, POINTER WHEEL 1 582008 BUSHING, FLANGE, 1.0 OD x .75 ID 4 995366 SCREW, HHC 3/4-10x3-1/4 YZ5 2 5070 B NUT, NYLOC 3/4-10 2

933241 WASHER, FLAT SAE 5/16 GRD 9 YZ 2

0202 SCREW, HHC 5/16-18 X 1 ZINC 2

926006 SCREW, SQHS, CP 1/4-20 x 1/2 2

20473 SCREW, HHC 3/8-16 x 3 FULL THREAD GR5 1

10133 NUT, NYLOC 3/8-16 1

1456 NUT, HEX FINISH 3/8-16 3

3233 WASHER, FENDER, 1.5OD X 3/8ID 2

574003 ROPE, POINTER ASSY. 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 41

SP-6057 CONCRETE SAW — GAUGES AND CONTROLS ASSY.

GAUGES AND CONTROLS ASSY.

PAGE 42 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — GAUGES AND CONTROLS ASSY.

GAUGES AND CONTROLS ASSY.

NO PART NO PART NAME QTY. REMARK

1 120222 BRACKET, DUETZ THROTTLE CABLE 1 2 25634 BULK HEAD ADAPTOR 2 3 25624 SWIVEL, CABLE END 1 4 448004-1 SPACER, DEUTZ THROTTLE ACTUATOR ARM 1 5 448004 ARM, DEUTZ THROTTLE ACTUATOR 1 6 M940653 SCREW, HHC M6-1.0 X 25MM GR10.9 2 7 15171 CABLE, PULL (THROTTLE/DRIVE ENGAGE) 2 8 584028 PIVOT END, CABLE 1 9 933242 WASHER, FLAT SAE 3/8 GRD 9 YZ 6 10 448006 CAM LEVER, CONCRETE SAW 1 11 926327 SCREW, SHDLR 3/8D X 1/2L, 5/16-1,SCKT HD 1 14 421000 TACHOMETER, ELECTRIC 0-3000 RPM 1 15 579072 GROMMET. 1/2" ID 4 16 406021 INDICATOR, ENGINE 1 17 423000 VOLTMETER 1 18 406017-1 KEY, IGNITION 2 19 406017 IGNITION SWITCH W/KEYS 1

20 406000 SWITCH, ROCKER, CH# M-58031-01 ...................... 2 ......... AUX AND LIGHTS

21 406020 BLANK, ROCKER SWITCH COVER......................... 1 ......... AUX SWITCH NOT USED

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 43

BATTERY ASSY.

SP-6057 CONCRETE SAW — BATTERY ASSY.

PAGE 44 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — BATTERY ASSY.

BATTERY ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 2 3 4 5 6 7 8 9 10

11 25826 BATTERY CABLE KIT ............................................... 1......... INCLUDES ITEMS W/#

12 13 14 15 16 17

19 35199 BATTERY AND MOUNTING ASSY. ........................... 1 ......... INCLUDES ITEMS W/

20 940692 SCREW, HHC M10-1.5 X 20MM 1 21 22 23 24 25 26

25597 PLATFORM W/A, CONCRETE SAW BATTERY 1

404006 BATTERY, EXIDE ORB75DT-84 1

125051 CLIP W/A, BATTERY RETAINER 1

1023 SCREW, HHC 3/8-16 X 1-1/4 GR 5 1

933242 WASHER, FLAT SAE 3/8 GRD 9 YZ 7

206011 PAD, RUBBER, CONCRETE SAW BATTERY 1

12832 WASHER, SNUBBING 4

575001 RUBBER ISOLATOR, TPC# 60166-1 4

1665 SCREW, HHC 3/8-16 X 2 4

10133 NUT, NYLOC 3/8-16 4

405061 TERMINAL, NEGATIVE BATTERY, MARINE 1

405060 TERMINAL, POSITIVE BATTERY, MARINE 1

915101 SCREW, HHC 3/8-16 X 1/2 GRD8 2

125042 HOSE BRACKET W/A 1

0131 A SCREW, HHC 1/4-20 X 3/4 1

933240 WASHER, FLAT SAE 1/4 GRD 9 YZ 1

# 35038 CABLE ASSY, BATTERY 1

# 35039 CABLE ASSY, BATTERY 1

# 35040 CABLE ASSY, BATTERY 1

# 35041 CABLE ASSY, BATTERY 1

# 35042 CABLE ASSY, BATTERY 1

# 35043 CABLE ASSY, BATTERY 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 45

FRONT AXLE ASSY.

SP-6057 CONCRETE SAW — FRONT AXLE ASSY.

PAGE 46 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — FRONT AXLE ASSY.

FRONT AXLE ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 16013-1 FRONT AXLE W/A, CONCRETE SAW 1 2 3 2621 FITTING, GREASE ZERK STR 1/4-28 2 4 5 6 7 912311 SCREW, HHC 5/8-11 x 2 4 8 933246 WASHER, FLAT 5/8 SAE GRD9 YZ 6 9 4702 NUT, HEX FINISH 5/8-11 8

10 M16020 WHEEL, 8 x 3 WITH BEARINGS, ASSY. .................. 2......... INCLUDES ITEMS W/

11 06505-008 SCREW, HHC 5/8-11x1.00 2 12 508005 PLATE, WHEEL COVER 2 13 1579 SCREW, HHC 1/4-20 x .5 6 14 926064 SCREW, SQHS,CP 5/16-24 x 5/8 2 15 583096 BACKING PLATE, SAW AXLE PIVOT BEARING 2 16 25599 BEARING, FLANGE 1.13"IDx4.59"BB 2 17 21376 SCREW, HHC 5/8-11 x 1-1/2 4 18 1162A CAP, GREASE ZERK #2 YELLOW 2

480003 SEAL, OIL CR# 9815 2

500006 WHEEL, 8 x 3 URETHANE, NO BEARINGS 1

576003 SNAP RING- HO-185 2

460002 BEARING, BALL, KOYO # 6005 2RS 4

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 47

DRIVE ASSY.

SP-6057 CONCRETE SAW — DRIVE ASSY.

PAGE 48 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — DRIVE ASSY.

DRIVE ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41*% 583064 STAND OFF, 1.00 HEX X 1.483 1 42*% 384001 FAN, 5-BLADE 1 43*% 923118 SCREW, SHC 8-32X1 NP 1 44*% 933201 WASHER, FENDER 3/16 X 3/4 ZINC 1 45*% 933242 WASHER, FLAT SAE 3/8 GRD 9 YZ 1 46*% 933072 WASHER, FLAT SAE #8 ZINC 1

263003 TRANSAXLE, SAUER 230-3010L LOCKED 1

206005 SKID PLATE, TRANS-AXLE 1

500009 WHEEL, REAR 12"X3"X2" BORE 2

582038 BUSHING, 1.0" TRANSTORQUE KEYLESS 2

540033- 4 PULLEY, 4.13 X A X 18 TOOTH SPLINE 1

35190 FAN GROUP ......................................................................... 1 ....... INCLUDES ITEMS W/%

120078 BACKING PLATE, SAW TRANSAXLE 2

125040 BRACKET, ALIGNMENT ADJUSTING 1

144003 RESERVOIR, HYDRAULIC OIL 1

120260 PLATE, HYDRAULIC OIL FILTER ADAPTER 1

25617 FILTER HEAD, TRANSAXLE 1

370192 FITTING, 45 8BEAD SHORT-6MO 3

370162-1 FITTING, 90 8BARB - 6MO 1

306006 FILTER, TRANSAXLE 1

35226 FITTING, 90 8 BEADED HOSE X 10MO 1

11722 FITTING, 90 6MJ-6MO 1

12431 FITTING, 90 8MJ-6MO 1

366692 FITTING, RUN TEE 6MJ - 6MJ - 6FJ 1

367470 FITTING, STR 4MJ - 6MO 1

368699 FITTING, PLUG 6MO HEX SKT HD 2

35014 HOSE ASM, 36.2" #6LP W/ 370674/370922 1

35015 HOSE ASM, 59.3" #6LP W/ 370922 1

35018 HOSE ASM, 23.3" #8LP W/ 370900 1

35019 HOSE, 1/2 ID PUSHLOCK 250 PSI, 6" 1

25976 HOSE, 1/2 ID PUSHLOCK 250 PSI, 18.5" 1

35012 HOSE ASM, 17.9" #6LP W/ 370674 1

25623 CIRCLIP 1

968011 NUT, HEX FINISH 1/2-13 2

933244 WASHER, FLAT SAE 1/2 GRD 9 YZ 2

933242 WASHER, FLAT SAE 3/8 GRD 9 YZ 8

06501-028 SCREW, HHC 3/8-16 X 3-1/2 8

06500-020 SCREW, HHC 5/16-18 X 2-1/2 2

933241 WASHER, FLAT SAE 5/16 GRD 9 YZ 4

5283 NUT, NYLOC 5/16-18 2

933076 WASHER, FLAT SAE #12 ZINC 4

923201 SCREW, SHC 1/4-20 X 1/2 4

923202 SCREW, SHC 1/4-20 X 5/8 2

15538 CLAMP, HOSE WORM # 6 5

19473 CLAMP, HOSE WORM # 2 2

35025 CLAMP, LOOM CUSHIONED #12 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 49

SP-6057 CONCRETE SAW — BLADESHAFT AND MOUNTING ASSY.

BLADESHAFT AND MOUNTING ASSY.

PAGE 50 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — BLADESHAFT AND MOUNTING ASSY.

BLADESHAFT AND MOUNTING ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 35193 BLADESHAFT AND MOUNTING GROUP, 6000 SERIES ......... 1 ...... INCLUDES ITEMS W/

# 120226 MOUNTING BLOCK, BLADESHAFT W/PIN 1

# 120225 MOUNTING BLOCK, BLADESHAFT 1

# 120224 SADDLE CLAMP W/A 1.50X4.00 BLADESHAFT 2

# 923357 SCREW, SHC 7/16-14 X 1-1/4, NP 4

# 16530 SCREW, HHC 7/16-14 X 1 2

# 933243 WASHER, FLAT SAE 7/16 GRD 9 YZ 6

# 06502-010 SCREW, HHC 7/16-14 X 1-1/4 4

% 168008 HOUSING, SINGLE SPEED BLADESHAFT 1

% 162003 BLADE SHAFT, SINGLE SPEED 1

% 576006 SNAP RING, ROTO CLIP # SH-196 2

14*% 925382 SCREW, SHS,KP 1/4-20 X 1/2 6 15*% 486001 THRUST WASHER, 6000 SERIES 2 16*% 485003 SLEEVE, BLADE SHAFT SEAL 2 17*% 480006 SEAL, OIL CR# 28655 2 18*% 480007 OIL SEAL, JOINT RADIAL 2 19*% 578135 O-RING, VITON # AS-135 2 20*% 460010 BEARING, ROLLER KOYO # 7210BGC3 2 21*% 39460011 BEARING, BALL KOYO # NU2210RC3 1 22*% 11721 FITTING, STR 6MJ-6M0 2 23*% 927048 KEY, WOODRUFF, #807 2 24*% 583026 DRAIN PLUG, MAGNETIC, 1/2-20 1 25*% 577009 GASKET, DRAIN PLUG 1

26*% 35254 SENDER ASM, TACHOMETER SIGNAL GENERATOR ............ 1 ....... INCLUDES ITEMS W/+

27*% 25690 GEAR, SAW BLADE SHAFT SPEED PICKUP 1

28*% 180003 COLLAR ASM, OUTER BLADE SHAFT .................................... 2....... INCLUDES ITEMS W/@

29*% 180004 COLLAR, INNER BLADE SHAFT 2 30*% 582012 BUSHING, QUICK DISCONNECT BLADE SHAFT 2 31*% 915316 SCREW, HHC 5/8-11X 3 LH GR8 1 32*% 25695 WASHER, SEAL 3/4” 1 33*% 915315 SCREW, HHC 5/8-11X3 GR8 1 34*% 576007 SNAP RING VH0-354 1 35*%+ 421001 GENERATOR, TACHOMETER SIGNAL 1 36*%+ 12171 SEAL, WEATHERPACK 16-18 GA, GREEN 2 37*%+ 12179 TERMINAL, WEATHERPACK MALE 14-16 GA 2 38*%+ 12176 CONNECTOR, WEATHERPACK 2 MALE PIN 1 39*%@ 926790 PIN, DOWEL 3/8 - 1-3/4 2 40*%@ 180003-1 COLLAR, OUTER BLADE SHAFT 2

M15003 BLADESHAFT ASSY., SINGLE SPEED CONCRETE SAW ...... 1 ...... INCLUDES ITEMS W/%

35194 MOUNTING ASSY., 6000 SERIES ............................................ 1 ...... INCLUDES ITEMS W/#

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 51

SP-6057 CONCRETE SAW — LIGHT CONNECTOR/DASH PANEL ASSY.

LIGHT CONNECTOR/DASH PANEL ASSY.

PAGE 52 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — LIGHT CONNECTOR/DASH PANEL ASSY.

LIGHT CONNECTOR/DASH PANEL ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 933241 WASHER, FLAT SAE 5/16 GRD 9 YZ 7 2 0655 SCREW, HHC 5/16-18 X 3/4 7 3 104016 COVER W/A, CONCRETE SAW DASH PANEL 1 4 13287 NUT, NYLOC 8-32 2 5 923114 SCREW, SHC 8-32 x 1/2 2 6 8 9 10 11 12

13 25865 HARNESS, LIGHT KIT .............................................. 1......... INCLUDES ITEMS W/

405000 CONNECTOR, 4-WAY SOCKET CHROME 1

25865-1 WIRE, BLACK #14 ?

25865-2 WIRE, BLACK #14 ?

12171 SEAL, WEATHERPACK 16-18 GA , GREEN 2

12179 TERMINAL, WEATHERPACK MALE 14-16 GA 2

12176 CONNECTOR, WEATHERPACK 2 PIN MALE 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 53

ENGINE GUARD ASSY.

SP-6057 CONCRETE SAW — ENGINE GUARD ASSY.

PAGE 54 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — ENGINE GUARD ASSY.

ENGINE GUARD ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 205010 GUARD W/A CONCRETE SAW ENGINE 1 2 2691 SCREW, HHC 1/2-13 X1" 1 3 933244 WASHER, FLAT SAE 1/2" GRD 9 YZ 1 4 0166 SCREW, HHC 3/8-16 X 7/8" 2 5 933242 WASHER, FLAT SAE 3/8" GRD 9 YZ 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 55

SP-6057 CONCRETE SAW — BLADE GUARD MOUNT/WIPER ASSY.

BLADE GUARD MOUNT/WIPER ASSY.

PAGE 56 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — BLADE GUARD MOUNT/WIPER ASSY.

BLADE GUARD MOUNT/WIPER ASSY.

NO. PART NO. PART NAME QTY. REMARKS

206006 STRIPS, SLURRY 2 120093 SPACER, RH BLADE CLIP 1 120091 SPACER, LH BLADE CLIP 1 120092 CLIP, RH BLADEGUARD MOUNT 1 120090 CLIP, LH BLADEGUARD MOUNT 1 100019 BACKING PLATE, CONCRETE SAW 2 5283 NUT, NYLOC 5/16-18 8 0202 SCREW, HHC 5/16-18 X 1 ZINC 8 924289 SCREW, FHSC 3/8-16 X 1-3/4 6

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 57

SP-6057 CONCRETE SAW — LOWER BELT GUARD ASSY.

LOWER BELT GUARD ASSY.

PAGE 58 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — LOWER BELT GUARD ASSY.

LOWER BELT GUARD ASSY.

NO. PART NO. PART NAME QTY. REMARKS

6 35198 GUARD, LOWER BELT PROTECTOR KIT, 6000 .................... 1 .......... INCLUDES ITEMS W/

202001 GUARD W/A, LOWER BELT 1 583091 STRAP, LOWER BELT GUARD 1 583092 WASHER, LOWER BELT PROTECTOR 1 933244 WASHER, FLAT SAE 1/2 GRD 9 YZ 4 3214 SCREW, HHC 1/2-13 X 1 1/4 4

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 59

HANDLE AND LIGHT ASSY.

SP-6057 CONCRETE SAW — HANDLE AND LIGHT ASSY.

PAGE 60 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — HANDLE AND LIGHT ASSY.

HANDLE AND LIGHT ASSY.

NO. PART NO. PART NAME QTY. REMARKS

6 560023-1 HANDLE BAR, CONCRETE SAW 2 7 560024 KNOB W/A, HANDLEBAR 2 8 923199 SCREW, SHC 8-32 X 1-1/4 2 9 574002 CAM CLEAT 1 10 11 12 13 560017 GRIP HANDLE BAR 2

14 M18004 LIGHT KIT ........................................................................ 1 .......... INCLUDES ITEMS W/

15503 KNOB, COMFORT GRIP STAR, 3/8 - 16 X 1 1 120206 LIGHT BAR W/A, CONCRETE SAW 1 405001 CONNECTOR, PLUG, 4 PIN FEMALE 1 TBD WASHER, LOCK 1 TBD NUT 1

35359 TERMINAL,FEM-SMALL 16-18 GA 2

405002 CORD, LIGHT-EXTENDABLE 1

2532 LIGHT ASSY.,RECTANGULAR COMP. 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 61

SP-6057 CONCRETE SAW — REAR POINTER AND FOOT REST ASSY.

REAR POINTER AND FOOT REST ASSY.

PAGE 62 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — REAR POINTER AND FOOT REST ASSY.

REAR POINTER AND FOOT REST ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 560029 FOOT REST 1 2 933241 WASHER, FLAT 5/16" YZ9 2 3 0202 SCREW, HHC 5/16"-18 X 1 ZINC 2 4 110020 REAR POINTER 1 5 0205 HCS, 3/8-16 X1 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 63

SP-6057 CONCRETE SAW — CONSOLE MOUNTING ASSY.

CONSOLE MOUNTING ASSY.

PAGE 64 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — CONSOLE MOUNTING ASSY.

CONSOLE MOUNTING ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 102040 CONSOLE, 6057 CONCRETE SAW 1 2 100025 FRAME PLATFORM ASSY, 6057 CONCRETE SAW 1

3 M18011 WEIGHT KIT, 6000-6400 SERIES ....................................... 1........ INCLUDES ITEMS W/

6 3214 SCREW, HHC 1/2-13 X 1 1/4 4 7 933244 WASHER, FLAT SAE 1/2 GRD 9 YZ 4 8 16530 SCREW, HHC 7/16-14 X 1 2 9 933243 WASHER, FLAT SAE 7/16 GRD 9 YZ 2

EM963105 SCREW, HHC 1/2-13 X 2 3 2549 SCREW, HHC 1/2-13 X 3 3 933244 WASHER, FLAT SAE 1/2 GRD 9 YZ 3

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 65

CABLE MOUNT ASSY.

SP-6057 CONCRETE SAW — CABLE MOUNT ASSY.

PAGE 66 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — CABLE MOUNT ASSY.

CABLE MOUNT ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 35203 CABLE MOUNT GROUP,6000-6400 1 2 540039 PULLY, POINTER ROPE 1 3 544002 SHOULDER, ADAPTER 1 4 125043-3 RETAINER, SAW POINTER CABLE 1 5 940674 SCREW, HHC M8-1.25 X 30MM GRADE 10.9 2 6 933241 WASHER, FLAT SAE 5/16 GRD 9 YZ 2 7 0948 WASHER, FLAT SAE 1/4 1 8 10136 WASHER, FLAT SAE 3/8 2 9 939654 SCREW, SHC M12-1.75x30MM 12.9 NP 1 10 4514 SCREW, HHC 1/4-20 X 5/8 GR 5 1 11 1665 SCREW, HHC 3/8-16 X 2 1 12 10133 NUT, NYLOC 3/8-16 1 13 125043 MOUNT W/A CABLE GUIDE 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 67

SP-6057 SAW — OPTIONAL FLANGE GUARD ASSY. (RIGHT-SIDE)

OPTIONAL FLANGE GUARD ASSY. (RIGHT-SIDE)

PAGE 68 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 SAW — OPTIONAL FLANGE GUARD ASSY. (RIGHT-SIDE)

OPTIONAL FLANGE GUARD ASSY. (RIGHT-SIDE)

NO. PART NO. PART NAME QTY. REMARKS

1 35030 OPTIONAL FLANGE GUARD, RIGHT-SIDE 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 69

BLADE GUARD ASSY.

SP-6057 CONCRETE SAW — BLADE GUARD ASSY.

PAGE 70 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — BLADE GUARD ASSY.

BLADE GUARD ASSY.

NO PART NO PART NAME QTY. REMARK

1 25916 BLADE GUARD 16-INCH 1 1 25917 BLADE GUARD 20-INCH 1 1 25918 BLADE GUARD 26-INCH 1 1 25919 BLADE GUARD 30-INCH 1 1 25920 BLADE GUARD 36-INCH 1 2 10176 NUT, NYLOCK 1/2-13 1 3 582040 BUSHING, BLADE GUARD 1

3 582039 BUSHING, BLADE GUARD ...................................... 2 ................. 30 AND 36-INCH ONLY

4 362000 HOSE, WATER #6LP 2 4 362005 HOSE, WATER #6LP 2 4 362006 HOSE, WATER #6LP 2 4 362007 HOSE, WATER #6LP 2 4 362008 HOSE, WATER #6LP 2 5 923144 SCREW, SHC 10-24X1/2 4 6 362003 TUBE, WATER, LH SIDE W/A 1 7 1618 NUT, NYLOCK 10-24 4 9 10930 WASHER, FENDER 1/4" X1-1/4" ZINC 1 10 10024 NUT, NYLOCK 1/4"-20 3 11 200019 FLAP, MUD BLADE GUARD 1 12 0131 A SCREW, HHC 1/4"-20 X 3/4" 1 13 445002 WATER MANIFOLD 1

13 445003 WATER MANIFOLD .................................................. 1 ................. 30 AND 36-INCH ONLY

14 26250 SCREW, HHC 1/4"-20 X1-3/4" 2 15 362002 TUBE, WATER, RH SIDE W/A 1 16 320010 FITTING, QD MALE SNAPTITE PHN4 1/4" MP 1 17 2113 FITTING, PLUG 1/8" MP HEX SKT HD 1 18 370456 FITTING, STR 6BARB-1/8" MP 2 19 06503-026 SCREW, HHC 1/2-13 X3-1/4" 1

19 06503-030 SCREW, HHC 1/2-13 X3-3/4" .................................... 1 ................. 30 AND 36-INCH ONLY

20 320009 FITTING, QD FEM SNAPTITE PHC4-4F 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 71

SP-6057 CONCRETE SAW—WIRING HARNESS/CIRCUIT BREAKER ASSY.

WIRING HARNESS/CIRCUIT BREAKER ASSY.

PAGE 72 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW—WIRING HARNESS/CIRCUIT BREAKER ASSY.

WIRING HARNESS/CIRCUIT BREAKER ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 933242 WASHER 1 2 10133 NUT, NYLOC 3/8-16 1 3 406012 MOUNTING BAR, CIRCUIT BREAKER 1 4 25935 NUT, HEX 10-32 W/STAR WASHER 3 5 933076 WASHER, FLAT SAE #12 ZINC 2 6 923201 SCREW, SHC 1/4-20 X 1/2 2 7 406019 CIRCUIT BREAKER, 10 AMP 3

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 73

WATER PUMP KIT ASSY.

SP-6057 CONCRETE SAW — WATER PUMP KIT ASSY.

PAGE 74 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — WATER PUMP KIT ASSY.

WATER PUMP KIT ASSY.

NO. PART NO. PART NAME QTY. REMARKS

22 M18042 WATER PUMP KIT, 6057 ........................................................... 1 ....... INCLUDES ITEMS W/

342000 PUMP, WATER JABSCO 1 12176 CONNECTOR, WEATHERPACK 2 MALE PIN 1 406000 SWITCH, ROCKER, CH# M-58031-01 1 366057 FITTING, BRASS 1/2FP-1MP 2 25931 FITTING, 90 8BARB - 1/2 MP (4390-8-8) 3 540003 PULLEY, W/BRG. 4” A SECTION 1 544002 SHOULDER, ADAPTER 1 25948 NUT, COUPLING 3/8 - 16 X 1.4 1 369970 FITTING, PETCOCK RAD DRAIN 1/4MP 1 120089 PLATE, WATER PUMP BACKING, W/A 1 35080 HOSE, #8LP-40” 1 35081 HOSE, #8LP-14.75 1 521008 V BELT, AX-46 1 35005 HOSE ASSY, 42.5” #6LP W/ 370674/370922 1 16693 BOLT, CARRAGE 3/8-16 X 2 1 0205 SCREW, HHC 3/8-16 X 1.0 2 933242 WASHER, FLAT SAE 3/8 GRD 9 YZ 4 1023 SCREW, HHC 3/8-16 X 1 1/4 GR 5 2 12179 TERMINAL, WEATHERPACK MALE 14-16 GA 2 12171 SEAL, WEATHERPACK 16-18 GA, GREEN 2 13832 WASHER, SNUBBING 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 75

GLOW PLUG KIT ASSY.

SP-6057 CONCRETE SAW — GLOW PLUG KIT ASSY.

NOte

PAGE 76 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

NOTE

Tier 1 Engine Only

SP-6057 CONCRETE SAW — GLOW PLUG KIT ASSY.

GLOW PLUG KIT ASSY.

NO. PART NO. PART NAME QTY. REMARKS

6 M18007 GLOW PLUG KIT ............................... 1 ............... INCLUDES ITEMS W/

400000 SOLENOID, 12VDC 1 409000 GLOW PLUG 1 35249 CABLE ASM, BATTERY 1 25992 SCREW, SHC 12-24 X 1/2 2 2203 WASHER 2

NOTE

Tier 1 Engine Only

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 77

SP-6057 CONCRETE SAW — BLADESHAFT SEAL KIT ASSY.

BLADESHAFT SEAL KIT ASSY.

PAGE 78 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — BLADESHAFT SEAL KIT ASSY.

BLADESHAFT SEAL KIT ASSY.

NO PART NO PART NAME QTY. REMARKS

6 TBD KIT, SEAL ............................................... 1 ...................... INCLUDES ITEMS W/

576006 SNAP RING, SH-196 2 925382 SCREW, SHS 1/4-20 X 1/2 6 480006 SEAL, OIL CR-28655 1 480007 SEAL, OIL CR-19599 2 578135 O-RING, SIZE 135, VITON 2

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 79

SP-6057 CONCRETE SAW — BUSHING EXTENSION KITS ASSEMBLY

BUSHING EXTENSION KITS ASSEMBLY

PAGE 80 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — BUSHING EXTENSION KITS ASSEMBLY

BUSHING EXTENSION KITS ASSEMBLY

NO. PART NO. PART NAME QTY. REMARKS

6 18501 BUSHING EXTENSION KIT (.375" — .75") ............. 1 ........... INCLUDES ITEMS W/

7# 926950 DOWEL PIN, 3/8" X 2-1/2 1 8# 180003 COLLAR, OUTER 1 9# 582033 QD BUSHING, 3/4" - 1-1/8 1 10# 90123445 5/8"-11 X 4 LH HEX BOLT 1 11# 915319 5/8"-11 X 4 RH HEX BOLT 1

12 18502 BUSHING EXTENSION KIT (.75" — 1.125") ........... 1 ........... INCLUDES ITEMS W/#

926949 DOWEL PIN, 3/8" X 2-1/4 1 180003 COLLAR, OUTER 1 582032 QD BUSHING, 3/8" - 3/4" 1 90123445 5/8"-11 X 4 LH HEX BOLT 1 915319 5/8"-11 X 4 RH HEX BOLT 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 81

SP-6057 CONCRETE SAW — ENGINE BLOCK HEATER ASSY. (OPTION)

ENGINE BLOCK HEATER ASSY. (OPTION)

PAGE 82 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — ENGINE BLOCK HEATER ASSY. (OPTION)

ENGINE BLOCK HEATER ASSY. (OPTION)

NO. PART NO. PART NAME QTY. REMARKS

1 M18008 HEATER, ENGINE BLOCK, DEUTZ 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 83

SP-6057 CONCRETE SAW — COLLAR/FLANGE PULLER ASSY. (OPTION)

COLLAR/FLANGE PULLER (OPTION)

PAGE 84 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — COLLAR/FLANGE PULLER ASSY. (OPTION)

COLLAR/FLANGE PULLER (OPTION)

NO. PART NO. PART NAME QTY. REMARKS

5 18503 COLLAR/FLANGE PULLER ASSY. ... 1 ...............INCLUDES ITEMS W/

584037 OUTER PULLER 1 584038 PLATE, PULLER 1 2549 SCREW, HHC 1/2"-13 X3 2 25138 SCREW, HHC 5/8"-11 X5 TAP 1

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 85

SP-6057 CONCRETE SAW — SEAL SLEEVE PULLER ASSY. (OPTION)

COLLAR/FLANGE PULLER (OPTION)

PAGE 86 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

SP-6057 CONCRETE SAW — SEAL SLEEVE PULLER ASSY. (OPTION)

COLLAR/FLANGE PULLER (OPTION)

NO. PART NO. PART NAME QTY. REMARKS

1 35163 SCREW, HHC 3/8 – 16 X 4 FULL THREAD 1

2 M18505 SEAL SLEEVE & THRUST WASHER PULLER ASSY. ....... 1 ........... INCLUDES ITEMS W/

4 584049 SEAL INSTALLATION TOOL 1 5

9 584050 TOOL, SEAL REMOVAL 1

35162 SCREW, 10 - 24 X 6 FULL THREAD 2

35161 SCREW, 10 - 24 X 12 FULL THREAD 2 937980 NUT, WELD 10 - 24 2 35164 SCREW, HHC 1/4 – 20 X 5 3 35165 SCREW, HHC 1/4 – 20 X 10 3

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 87

Effective: October 1, 2002

TERMS AND CONDITIONS OF SALE — PARTS

PAYMENT TERMS

Terms of payment for parts are net 30 days.

FREIGHT POLICY

All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin. Multiquip’s responsibility ceases when a signed manifest has been obtained from the carrier, and any claim for shortage or damage must be settled between the consignee and the carrier.

MINIMUM ORDER

The minimum charge for orders from Multiquip is $15.00 net. Customers will be asked for instructions regarding handling of orders not meeting this requirement.

RETURNED GOODS POLICY

Return shipments will be accepted and credit will be allowed, subject to the following provisions:

1. A Returned Material Authorization must be approved by Multiquip prior to shipment.

2. To obtain a Return Material Authorization, a list must be provided to Multiquip Parts Sales that defines item numbers, quantities, and descriptions of the items to be returned.

a. The parts numbers and descriptions

must match the current parts price list.

b. The list must be typed or computer

generated.

c. The list must state the reason(s) for

the return.

d. The list must reference the sales

order(s) or invoice(s) under which the items were originally purchased.

e. The list must include the name and

phone number of the person requesting the RMA.

3. A copy of the Return Material Authorization must accompany the return shipment.

4. Freight is at the sender’s expense. All parts must be returned freight prepaid to Multiquip’s designated receiving point.

5. Parts must be in new and resalable con-

6. The following items are not returnable:

7. The sender will be notified of any material

8. Such material will be held for five working

9. Credit on returned parts will be issued at

10. In cases where an item is accepted, for

11. Credit issued will be applied to future

PRICING AND REBATES

Prices are subject to change without prior notice. Price changes are effective on a specific date and all orders received on or after that date will be billed at the revised price. Rebates for price declines and added charges for price increases will not be made for stock on hand at the time of any price change.

Multiquip reserves the right to quote and sell dition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked.

a. Obsolete parts. (If an item is in the

price book and shows as being replaced by another item, it is obsolete.)

b. Any parts with a limited shelf life

(such as gaskets, seals, “O” rings, and other rubber parts) that were purchased more than six months prior to the return date.

c. Any line item with an extended dealer

net price of less than $5.00. d. Special order items.

e. Electrical components.

f. Paint, chemicals, and lubricants.

g. Decals and paper products. h. Items purchased in kits.

received that is not acceptable.

days from notification, pending instructions. If a reply is not received within five days, the material will be returned to the sender at his expense.

dealer net price at time of the original purchase, less a 15% restocking charge.

which the original purchase document can not be determined, the price will be based on the list price that was effective twelve months prior to the RMA date.

purchases only.

direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products.

SPECIAL EXPEDITING SERVICE

A $35.00 surcharge will be added to the invoice for special handling including bus shipments, insured parcel post or in cases where Multiquip must personally deliver the parts to the carrier.

LIMITATIONS OF SELLER’S LIABILITY

Multiquip shall not be liable hereunder for damages in excess of the purchase price of the item with respect to which damages are claimed, and in no event shall Multiquip be liable for loss of profit or good will or for any other special, consequential or incidental damages.

LIMITATION OF WARRANTIES

No warranties, express or implied, are made in connection with the sale of parts or trade accessories nor as to any engine not manufactured by Multiquip. Such warranties made in connection with the sale of new, complete units are made exclusively by a statement of warranty packaged with such units, and Multiquip neither assumes nor authorizes any person to assume for it any other obligation or liability whatever in connection with the sale of its products. Apart from such written statement of warranty, there are no warranties, express, implied or statutory, which extend beyond the description of the products on the face hereof.

PAGE 88 — SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06)

NOTE PAGE

SP-6000 SERIES SAWS — PARTS MANUAL — REV. #0 (03/22/06) — PAGE 89

PARTS MANUAL

HERE'S HOW TO GET HELP

PLEASE HAVE THE MODEL AND SERIAL

NUMBER

UNITED STATES

Multiquip Corporate Office MQ Parts Department

18910 Wilmington Ave. Tel. (800) 421-1244 800-427-1244 Fax: 800-672-7877 Carson, CA 90746 Fax (800) 537-3927 310-537-3700 Fax: 310-637-3284 Contact: mq@multiquip.com

Mayco Parts Warranty Department

800-306-2926 Fax: 800-672-7877 800-421-1244, Ext. 279 Fax: 310-537-1173 310-537-3700 Fax: 310-637-3284 310-537-3700, Ext. 279

Service Department Technial Assistance

800-421-1244 Fax: 310-537-4259 800-478-1244 Fax: 310-631-5032 310-537-3700

ON-HAND

WHEN CALLING

^^^^^*^^^^^^^^^^^^^^^^^^^^^^^^^*^6668

MEXICO UNITED KINGDOM

MQ Cipsa Multiquip (UK) Limited Head Office

Carr. Fed. Mexico-Puebla KM 126.5 Tel: (52) 222-225-9900 Hanover Mill, Fitzroy Street, Tel: 0161 339 2223 Momoxpan, Cholula, Puebla 72760 Mexico Fax: (52) 222-285-0420 Ashton-under-Lyne, Fax: 0161 339 3226 Contact: pmastretta@cipsa.com.mx Lancashire OL7 0TL

Contact: sales@multiquip.co.uk

CANADA BRAZIL

Multiquip Multiquip

4110 Industriel Boul. Tel: (450) 625-2244 Av. Evandro Lins e Silva, 840 - grupo 505 Tel: 011-55-21-3433-9055 Laval, Quebec, Canada H7L 6V3 Fax: (450) 625-8664 Barra de Tijuca - Rio de Janeiro Fax: 011-55-21-3433-9055

Contact: jmartin@multiquip.com Contact: cnavarro@multiquip.com.br, srentes@multiquip.com.br

Multiquip Inc, the MQ logo and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission.

This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.

The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations are based on the MQ SP4 Saw. Illustrations, descriptions, references and technical data contained in this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published in this publication at any time without notice and without incurring any obligations.

Your Local Dealer is:

Multiquip SP605716, SP605726, SP605720, SP605736, SP605730 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual