PARTS MANUAL
MODEL QP-301TY
MODEL QP-301TA
TRASH PUMPS
(YANMAR L60AEP/ROBIN EH25 GASOLINE ENGINES)
Revision #0 (09/08/10)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING
PAGE 2 — QP-301TY/ QP-301TA TRASH PUMP — PARTS MANUAL — REV. #0 (09/08/10)
TABLE OF CONTENTS
QP-301TY/QP301TA
Proposition 65 Warning ............................................. 2
Table of Contents ...................................................... 3
Parts Ordering Procedures ....................................... 4
Explanation of Codes in Remarks Column ............... 6
Suggested Spare Parts ............................................. 7
COMPONENT DRAWINGS
Pump Assembly ................................................... 8-11
Terms and Condition of Sale
NOTICE
Specification and part number are subject to change
without notice.
— Parts ...................... 12
QP-301TY/QP-301TA TRASH PUMP — PARTS MANUAL— REV. 0 (09/08/10) — PAGE 3
PARTS ORDERING PROCEDURES
Ordering parts has never been easier!
Choose from three easy options:
January 1
Effective:
st
, 2006
Best Deal!
Order via Internet (Dealers Only):
Order parts on-line using Multiquip’s SmartEquip website!
N View Parts Diagrams
N Order Parts
N Print Specification Information
Goto www.multiquip.com and click on
Order Par ts
Order via Fax (Dealers Only):
All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Non-Dealer Customers:
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
to log in and save!
Order via Phone:
If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.
com.
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*
Note: Discounts Are Subject To Change
Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
Note: Discounts Are Subject To Change
Domestic (US) Dealers Call:
1-800-427-1244
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
R Dealer Account Number
R Dealer Name and Address
R Shipping Address (if different than billing address)
R Return Fax Number
R Applicable Model Number
R Quantity, Part Number and Description of Each Part
www.multiquip.com
PAGE 4 — QP-301TY/ QP-301TA TRASH PUMP — PARTS MANUAL — REV. #0 (09/08/10)
When ordering parts, please supply:
R Specify Preferred Method of Shipment:
UPS/Fed Ex DHL
N Priority One Truck
N Ground
N Next Day
N Second/Third Day
NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.
WE ACCEPT ALL MAJOR CREDIT CARDS!
NOTE PAGE
QP-301TY/QP-301TA TRASH PUMP — PARTS MANUAL— REV. 0 (09/08/10) — PAGE 5
QP-301TY/QP-301TA — EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice. Multiquip
does not guarantee the availability of the parts listed.
SAMPLE PARTS LIST
NO. PART NO. PART NAME QTY. REMARKS
1 12345 BOLT ......................1 .....INCLUDES ITEMS W/%
2% WASHER, 1/4 IN. ...........NOT SOLD SEPARATELY
2% 12347 WASHER, 3/8 IN. ...1 .....MQ-45T ONLY
3 12348 HOSE ..................A/R ...MAKE LOCALLY
4 12349 BEARING ..............1 .....S/N 2345B AND ABOVE
NO. Column
Unique Symbols — All items with same unique
symbol
QTY. Column
Numbers Used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
A blank entry generally indicates that the item is not sold
separately. Other entries will be clarified in the “Remarks”
Column.
REMARKS Column
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.
Assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.
Indicated by:
“INCLUDES ITEMS W/(unique symbol)”
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
PART NO. Column
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.
Serial Number Break — Used to list an effective serial
number range where a particular part is used.
Indicated by:
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specific Model Number Use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
“Make/Obtain Locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items. Examples include battery cables, shims,
and certain washers and nuts.
“Not Sold Separately” — Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.
PAGE 6 — QP-301TY/ QP-301TA TRASH PUMP — PARTS MANUAL — REV. #0 (09/08/10)
QP-301TY/QP-301TA — SUGGESTED SPARE PARTS
QP-301TY/QP-301TA, TRASH PUMPS WITH YANMAR L60AEDP/ROBIN
EH25 GASOLINE ENGINES
1 to 3 units
QTY. P/N DESCRIPTION
1 .......... 1343040030 ......... IMPELLER
1 .......... 0631211100 ......... FLOODING CAP
1 .......... 0806123530 ......... MECHANICAL SEAL
1 .......... 0811883056 ......... MECHANICAL SEAL SLEEVE
1 .......... 0489352400 ......... O-RING DRAIN COVER
1 .......... 0489353970 ......... O-RING CASING (QP-301TY)
1 .......... 0489354020 ......... O-RING CASING (QP-301TA)
1 .......... 0481310250 ......... O-RING MECHANICAL SEAL SLEEVE
1 .......... 0852834525 ......... ADJUST LINER DIA. 45 X DIA. 25 T0.3
1 .......... 0852854525 ......... ADJUST LINER DIA. 45 X DIA. 25 T0.5
NOTICE
Part number on this Suggested Spare Parts List may super
cede/replace the P/N shown in the text pages of this book.
QP-301TY/QP-301TA TRASH PUMP — PARTS MANUAL— REV. 0 (09/08/10) — PAGE 7
QP-301TY/QP-301TA — PUMP ASSY.
PAGE 8 — QP-301TY/ QP-301TA TRASH PUMP — PARTS MANUAL — REV. #0 (09/08/10)
QP-301TY/QP-301TA — PUMP ASSY.
NO. PART NO. PART NAME QTY. REMARKS
1 L60AEDP ENGINE, YANMAR L60 .......................................1 ............. QP301TY
1 EH252YD1112 ENGINE, ROBIN EH25 .......................................1 ............. QP301TA
2 1343100010 CASING NPS3” 1
3 1317100020 CASING COVER 1
4 1343100160 SUCTION COVER NPS3” 1
5 1268100170 DRAIN COVER 1
6 1247100250 DRAIN COVER HANDLE 2
7 1343040030 IMPELLER 1
8 1317000130 VOLUTE CASING 1
9 1247000200 DRAIN COVER PUSH PLATE 2
10 1247000190 DRAIN COVER SET HANDLE DIA.75 M12 2
11 1247200270 HINGE BOLT M12 X 90 2
12 1247220280 HINGE PIN 2
13 0641400430 SPLIT PIN DIA. 4 X 30 ........................................2 ............. QP301TY
13 0641400520 SPLIT PIN DIA. 4 X 30 ........................................2 ............. QP301TA
14 0790433030 NIPPLE NPS3” X NPT 3” 2
15 2345214010 PIPE FRAME 1
16 2345214020 ENGINE BASE 1
17 0723302040 CUSHION RUBBER DIA. 40 H20 M10 4
18 1317350350 CHECK VALVE 1
19 1317330370 SUCTION COVER PACKING 1
20% 4313000600 CASING COVER SET PLATE G65 ..................... 1 ............. QP301TY
20% 1317390610 CASING COVER SET PLATE .............................1 ............. QP301TA
21% 0489352400 O-RING (DRAIN COVER) 1
DIA. 3.5 X DIA. 240
22 0489353970 O-RING (CASING) DIA. 3.5 X DIA. 397 ...............1 ............. QP301TY
22 0489354020 O-RING (CASING)DIA. 3.5 X DIA. 396 ................1 ............. QP301TA
23% 0489312300 O-RING (VOLUTE CASING) 1
DIA. 3.1 X DIA. 228
24 0481310800 O-RING (NIPPLE) G80 2
25% 0481310250 O-RING (MECHANICAL SEAL SLEEVE) G25 1
26 0480350300 O-RING (FLOODING DRAIN CAP) P30 3
27 0631211100 FLOODING CAP PF1” 1
28 0631211100 DRAIN CAP PF1” 2
29% 0801123530 MECHANICAL SEAL DIA. 30 1 SET
30 0811883056 MECHANICAL SEAL SLEEVE 1
DIA. 25.4 X DIA 30 X 56
31% 0852834525 ADJUST LINER DIA. 45 X DIA. 25 t0.3 1
31% 0852854525 ADJUST LINER DIA. 45 X DIA. 25 t0.5 1
32 0141090510 SCREW (CHECK VALVE) M5 X 10 2
33 0141090820 SCREW (VOLUTE CASING) M8 X 20 2
34 0141050825 SCREW (DRAIN COVER HANDLE) M8 X 25 4
35 0131151235 CAP SCREW (CASING) M12 X 35 ..................... 5 ............. QP301TY
35 014212030 CAP SCREW (CASING) M12 X 30 .....................5 ............. QP301TA
QP-301TY/QP-301TA TRASH PUMP — PARTS MANUAL— REV. 0 (09/08/10) — PAGE 9
QP-301TY/QP-301TA — PUMP ASSY.
PAGE 10 — QP-301TY/ QP-301TA TRASH PUMP — PARTS MANUAL — REV. #0 (09/08/10)
QP-301TY/QP-301TA — PUMP ASSY.
NO. PART NO. PART NAME QTY. REMARKS
36 0131151030 CAP SCREW (SUCTION COVER) M10 X 30 4
37 0105051030 BOLT (PUMP) M10 X 30 2
38 0105051045 BOLT (ENGINE) M10 X 45 4
39 0106050820 BOLT (CASING COVER) M8 X 20-8T .................4 ............. QP301TY
39 011708025 BOLT (CASING COVER) 8 X 25 ......................... 4 ............. QP301TA
40 0401450100 WASHER M10 .....................................................4 ............. QP301TY
40 031110160 WASHER, FLAT ...................................................4 ............. QP301TA
41 0458220080 SEAL WASHER M8 .............................................4 ............. QP301TY
41 030208200 WASHER, LOCK 8 MM .......................................4 ............. QP301TA
42 0401450050 WASHER M5 2
43 0451250100 WASHER, LOCK M10 ....................................... 14 ............. QP301TY
43 030210250 WASHER, LOCK M10 ....................................... 14 ............. QP301TA
44 0451250080 WASHER, LOCK M8 6
44 030208200 WASHER, LOCK 8 MM 6
45 0205450100 NUT (PUMP ENG CUSHION RUBBER) M10 .... 14 ............. QP301TY
45 020310080 NUT (PUMP ENG CUSHION RUBBER) M10 .... 14 ............. QP301TA
46 0742304080 STRAINER NPT3” TRASH 1
47 0181050825 BOLT M8 X 25 4
48 0401450080 WASHER M8 .......................................................4 ............. QP301TY
48 0451250100 WASHER M8 .......................................................4 ............. QP301TA
49 1317390610 CASING COVER PACKING .................................1 ............. QP301TY
49 43130006000014 CASING COVER PACKING .................................1 ............. QP301TA
50 KIT301T PUMP KIT ...........................................................1 ............. INCLUDES ITEMS W/%
QP-301TY/QP-301TA TRASH PUMP — PARTS MANUAL— REV. 0 (09/08/10) — PAGE 11
TERMS AND CONDITIONS OF SALE — PARTS
r
PAYMENT TERMS
Terms of payment for parts are net 30 days.
FREIGHT POLICY
All parts orders will be shipped collect or
prepaid with the charges added to the invoice.
All shipments are F.O.B. point of origin.
Multiquip’s responsibility ceases when a
signed manifest has been obtained from the
carrier, and any claim for shortage or damage
must be settled between the consignee and
the carrier.
MINIMUM ORDER
The minimum charge for orders from Multiquip
is $15.00 net. Customers will be asked for
instructions regarding handling of orders not
meeting this requirement.
RETURNED GOODS POLICY
Return shipments will be accepted and
credit will be allowed, subject to the following
provisions:
A Returned Material Authorization 1.
must be approved by Multiquip prior to
shipment.
To obtain a Return Material Authorization, 2.
a list must be provided to Multiquip
Parts Sales that defines item numbers,
quantities, and descriptions of the items
to be returned.
The parts numbers and descriptions a.
must match the current parts price
list.
The list must be typed or computer b.
generated.
The list must state the reason(s) c.
for the return.
The list must reference the sales d.
order(s) or invoice(s) under
which the items were originally
purchased.
The list must include the name e.
and phone number of the person
requesting the RMA.
A copy of the Return Material Authorization 3.
must accompany the return shipment.
Freight is at the sender’s expense. All 4.
parts must be returned freight prepaid to
Multiquip’s designated receiving point.
Parts must be in new and resalable 5.
condition, in the original Multiquip
package (if any), and with Multiquip part
numbers clearly marked.
The following items are not returnable:6.
Obsolete parts. (If an item is in the a.
price book and shows as being
replaced by another item, it is
obsolete.)
Any parts with a limited shelf life b.
(such as gaskets, seals, “O” rings,
and other rubber parts) that were
purchased more than six months
prior to the return date.
Any line item with an extended c.
dealer net price of less than
$5.00.
Special order items.d.
Electrical components.e.
Paint, chemicals, and lubricants.f.
Decals and paper products.g.
Items purchased in kits.h.
The sender will be notified of any material 7.
received that is not acceptable.
Such material will be held for five 8.
working days from notification, pending
instructions. If a reply is not received
within five days, the material will be
returned to the sender at his expense.
Credit on returned parts will be issued 9.
at dealer net price at time of the original
purchase, less a 15% restocking
charge.
In cases where an item is accepted, for 10.
which the original purchase document
can not be determined, the price will be
based on the list price that was effective
twelve months prior to the RMA date.
Credit issued will be applied to future 11.
purchases only.
PRICING AND REBATES
Prices are subject to change without prior
notice. Price changes are effective on a
specific date and all orders received on or
after that date will be billed at the revised price.
Rebates for price declines and added charges
for price increases will not be made for stock
on hand at the time of any price change.
Multiquip reserves the right to quote and
sell direct to Government agencies, and to
Original Equipment Manufacturer accounts
who use our products as integral parts of their
own products.
SPECIAL EXPEDITING SERVICE
A $35.00 surcharge will be added to the
invoice for special handling including bus
shipments, insured parcel post or in cases
where Multiquip must personally deliver the
parts to the carrier.
LIMITATIONS OF SELLER’S LIABILITY
Multiquip shall not be liable hereunder fo
damages in excess of the purchase price of
the item with respect to which damages are
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
other special, consequential or incidental
damages.
LIMITATION OF WARRANTIES
No warranties, express or implied, are
made in connection with the sale of parts or
trade accessories nor as to any engine not
manufactured by Multiquip. Such warranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes nor
authorizes any person to assume for it
any other obligation or liability whatever in
connection with the sale of its products. Apart
from such written statement of warranty,
there are no warranties, express, implied or
statutory, which extend beyond the description
of the products on the face hereof.
Effective: February 22, 2006
PAGE 12 — QP-301TY/ QP-301TA TRASH PUMP — PARTS MANUAL — REV. #0 (09/08/10)
NOTE PAGE
QP-301TY/QP-301TA TRASH PUMP — PARTS MANUAL— REV. 0 (09/08/10) — PAGE 13
PARTS MANUAL
©
HERE’S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
UNITED STATES
Multiquip Corporate Office MQ Parts Department
18910 Wilmington Ave.
Carson, CA 90746
Contact: mq@multiquip.com
Mayco Parts Warranty Department
Tel. (800) 421-1244
Fax (800) 537-3927
800-427-1244
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
800-306-2926
310-537-3700
Service Department Technical Assistance
800-421-1244
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
Fax: 310-537-4259 800-478-1244 Fax: 310-631-5032
800-421-1244, Ext. 279
310-537-3700, Ext. 279
Fax: 310-537-1173
MEXICO UNITED KINGDOM
MQ Cipsa Multiquip (UK) Limited Head Office
Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla 72760 Mexico
Contact: pmastretta@cipsa.com.mx
Tel: (52) 222-225-9900
Fax: (52) 222-285-0420
Unit 2, Northpoint Industrial Estate,
Global Lane,
Dukinfield, Cheshire SK16 4UJ
Contact: sales@multiquip.co.uk
Tel: 0161 339 2223
Fax: 0161 339 3226
CANADA
Multiquip
4110 Industriel Boul.
Laval, Quebec, Canada H7L 6V3
Contact: jmartin@multiquip.com
COPYRIGHT 2010, MULTIQUIP INC.
Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property
of their respective owners and used with permission.
This manual
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.
MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.
Tel: (450) 625-2244
Tel: (877) 963-4411
Fax: (450) 625-8664
Your Local Dealer is:
Loading...