Multiquip PS403016, PS403030, PS403026, PS403020 User Manual

PARTS MANUAL

MODELS

PS403016
PS403020
PS403026
PS403030

PAVEMENT SAW

(DEUTZ F2L2011 DIESEL ENGINE)

Revision #1 (11/03/09)

To find the latest revision of this

publication, visit our website at:

www.multiquip.com

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

P/N 37748

PROPOSITION 65 WARNING

Engine exhaust and some of
its constituents, and some dust created
by power sanding, sawing, grinding,
drillingandotherconstructionactivities
contains chemicals known to the State
of California to cause cancer, birth
defects and other reproductive harm.
Some examples of these chemicals are:

Leadfromlead-basedpaints.
Crystallinesilicafrombricks.
Cementandothermasonryproducts.
Arsenicandchromiumfrom chemically
treatedlumber.

Your risk from these exposures varies,
dependingonhowoftenyoudothistype
of work. To reduce your exposure to
these chemicals: work in aALWAYS
well ventilated area, and work with

approved safety equipment, such as

dust masks that are specially designed
to filter out microscopic particles.

PAGE 2 — PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #1 (11/03/09)

SILICOSIS/RESPIRATORY WARNINGS

WARNING

SILICOSIS WARNING RESPIRATORY HAZARDS

Grinding/cutting/drilling of masonry, concrete, metal and
other materials with silica in their composition may give
off dust or mists containing crystalline silica. Silica is a
basic component of sand, quartz, brick clay, granite and
numerous other minerals and rocks. Repeated and/or
substantial inhalation of airborne crystalline silica can
cause serious or fatal respiratory diseases, including
silicosis. In addition, California and some other
authorities have listed respirable crystalline silica as a
substance known to cause cancer. When cutting such
materials, always follow the respiratory precautions
mentioned above.

WARNING

Grinding/cutting/drilling of masonry, concrete, metal and
other materials can generate dust, mists and fumes
containing chemicals known to cause serious or fatal
injury or illness, such as respiratory disease, cancer,
birth defects or other reproductive harm. If you are
unfamiliar with the risks associated with the particular
process and/or material being cut or the composition of
the tool being used, review the material safety data
sheet and/or consult your employer, the material
manufacturer/supplier, governmental agencies such as
OSHA and NIOSH and other sources on hazardous
materials. California and some other authorities, for
instance, have published lists of substances known to
cause cancer, reproductive toxicity, or other harmful
effects.

Control dust, mist and fumes at the source where
possible. In this regard use good work practices and
follow the recommendations of the manufacturers or
suppliers, OSHA/NIOSH, and occupational and trade
associations. Water should be used for dust
suppression when wet cutting is feasible. When the
hazards from inhalation of dust, mists and fumes cannot
be eliminated, the operator and any bystanders should
always wear a respirator approved by NIOSH/MSHA for
the materials being used.

PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #0 (11/03/09) — PAGE 3

PS4030 — MULTIQUIP SAW

Proposition 65 Warning ............................................. 2

Silicosis/Respirator Warnings .................................... 3

Table of Contents ...................................................... 4

Parts Ordering Procedures ....................................... 5

Explanation Of Code In Remarks Column ................ 6

Suggested Spare Parts ............................................. 7

Nameplate and Decals........................................... 8-9

Control Panel Decals.......................................... 10-11

Electrical Controls Assy. ..................................... 12-13

Console Mounts Assy. ........................................ 14-15

Rear Console Access Panel Assy. ..................... 16-17

Light Connector/Dash Access Assy. .................. 18-19

Belt and Engine Guards Assy. ........................... 20-21

Depth Indicator/Stop Switch Assy. ..................... 22-23

F-N-R Assy. ........................................................ 24-25

Fuel Assy. ........................................................... 26-27

Battery Assy. ...................................................... 28-29

Handelbars Assy. ............................................... 30-31

Water System Assy. ........................................... 32-33

Engine Assy. ....................................................... 34-35

Throttle Control Assy. ......................................... 36-37

Engine Mounts Assy. .......................................... 38-39

Lifting Bale & Air Cleaner Assy. .......................... 40-41

Platform Guards/Rear Pointer Assy. .................. 42-43

Wheel Drive Assy. .............................................. 44-45

Front Axle Assy. .................................................. 46-47

Hydraulic System Assy. ...................................... 48-49

Hydraulic Hoses and Fittings Assy. .................... 50-51

Front Pointer Assy. ............................................. 52-53

Belt Drive Assy. .................................................. 54-55

Drive Pulley Assy. ............................................... 56-57

Blade Shaft Assy. ............................................... 58-59

16", 20", 26" Blade Guard Assy. ........................ 60-61

30" Blade Guard Assy. ....................................... 62-63

TABLE OF CONTENTS

Terms and Conditions of Sale ................................. 65

PAGE 4 — PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #1 (11/03/09)

Specifications are subject to change without
notice.

PARTS ORDERING PROCEDURES

Ordering parts has never been easier!

Choose from three easy options:

Effective:

January 1

st

, 2006

Best Deal!

Order via Internet (Dealers Only):

Order parts on-line using Multiquip’s SmartEquip website!

■

View Parts Diagrams

■

Order Parts

■

Print Specification Information

Goto www.multiquip.com and click on

Order Parts

Order via Fax (Dealers Only):

All customers are welcome to order parts via Fax.

Domestic (US) Customers dial:

1-800-6-PARTS-7 (800-672-7877)

Non-Dealer Customers:

Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.

to log in and save!

Order via Phone:

If you have an MQ Account, to obtain a
Username and Passw ord, E-ma il us at:

[e-mail].

To obtain an MQ Account, contact your
District Sales Manager for more inform ation.

Use the

internet

on

Standard orders

and qualify for a 5% Discount

for all orders which include

complete part numbers.*

Fax

your order in and qualify for a 2% Discount

on

Standard orders

for all orders which include

complete part numbers.*

Domestic (US) Dealers Call:

1-800-427-1244

International Customers

their local Multiquip Representatives for
Parts Ordering information.

Note: Discounts Are Subject To Change

Note: Discounts Are Subject To Change

should contact

❒❒

❒

❒❒

❒❒

❒

❒❒

❒❒

❒

❒❒

❒❒

❒

❒❒
❒❒

❒

❒❒

❒❒

❒

❒❒

www.multiquip.com

PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #0 (11/03/09) — PAGE 5

When ordering parts, please supply:

❒❒

Dealer Account Number

Dealer Name and Address

Shipping Address (if different than billing address)

Return Fax Number
Applicable Model Number

Quantity, Part Number and Description of Each Part

All orders are treated as
and will ship the same day if received prior
to 3PM PST.

WE ACCEPT ALL MAJOR CREDIT CARDS!

❒

❒❒

Standard Orders

Specify Preferred Method of Shipment:

✓

UPS/Fed Ex

■

Priority One

■

Ground

■ Next Day

■

Second/Third Day

✓ DHL
✓

Tr u ck

EXPLANATION OF CODE IN REMARKS COLUMN

The following section explains the different symbols and
remarks used in the Parts section of this manual. Use the help
numbers found on the back page of the manual if there are any
questions.

The contents and part numbers listed in the parts section are
subject to change
guarantee the availibility of the parts listed.

Sample Parts List:

NO. PART NO. PART NAME QTY. REMARKS

1 12345 BOLT ...................... 1 ......INCLUDES ITEMS W/

2

*

2*12347 WASHER, 3/8 IN. ... 1 ......

3 12348 HOSE ................... A/R ....MAKE LOCALLY

4 12349 BEARING ............... 1 ......S/N 2345B AND ABOVE

NO. Column

Unique Symbols - All items with same unique symbol

(*, #, +, %, or >) in the number column belong to the same
assembly or kit, which is indicated by a note in the “Remarks”
column.

Duplicate Item Numbers - Duplicate numbers indicate
multiple part numbers are in effect for the same general
item, such as different size saw blade guards in use or a
part that has been updated on newer versions of the same
machine.

When ordering a part that has more than one
item number listed, check the remarks column
for help in determining the proper part to order.

without notice

WASHER, 1/4 IN. .............

. Multiquip does not

NOT SOLD SEPARATELY
MQ-45T ONLY

*

QTY. Column

Numbers Used - Item quantity can be indicated by a

number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other parts

that are sold in bulk and cut to length.
A blank entry generally indicates that the item is not sold

separately. Other entries will be clarified in the “Remarks”
Column.

REMARKS Column

Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed to
describe the item can also be shown.

Assembly/Kit

unique symbol will be included when this item is purchased.

Indicated by:

“INCLUDES ITEMS W/(unique symbol)”

Serial Number Break

number range where a particular part is used.

Indicated by:

“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”

Specific Model Number Use

used only with the specific model number or model number
variant listed. It can also be used to show a part is NOT
used on a specific model or model number variant.

Indicated by:

“XXXXX ONLY”
“NOT USED ON XXXX”

- All items on the parts list with the same

- Used to list an effective serial

- Indicates that the part is

PART NO. Column

Numbers Used - Part numbers can be indicated by a

number, a blank entry, or TBD.
TBD (To Be Determined) is generally used to show a part

that has not been assigned a formal part number at time of
publication.

A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will be
clarified in the “Remarks” Column.

PAGE 6 — PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #1 (11/03/09)

“Make/Obtain Locally”

purchased at any hardware shop or made out of available
items. Examples include battery cables, shims, and certain
washers and nuts.

“Not Sold Separately”

purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available for
sale through Multiquip.

- Indicates that the part can be

- Indicates that an item cannot be

SUGGESTED SPARE PARTS

PS4030 MULTIQUIP SAW

1 TO 3 UNITS WITH DEUTZ TURBO DIESEL ENGINE

Qty. P/N Description

1 ....... 37094 .................. SWITCH, TOGGLE F-N-R

1 ....... 37198 .................. SWITCH, EMERGENCY STOP

1 ....... 406021 ................ INDICATOR, ENGINE

1 ....... 37243 .................. SWITCH, ROLLER ARM

1 ....... 37203 .................. SWITCH, ROLLER PLUNGER

2 ....... 406000 ................ SWITCH, ROCKER

2 ....... 37131 .................. FRONT WHEEL

2 ....... 37095 .................. REAR WHEEL

1 ....... 29509 .................. CAP, FUEL TANK

2 ....... 560017 ................ GRIPS, HANDLEBAR

1 ....... H9406 .................. BULB, GE H9406

1 ....... 15503 .................. KNOB, COMFORT

1 ....... 37527 .................. SPRING, EXTENSION DEPTH INDICATOR

1 ....... 37128 .................. BALL VALVE, FUEL

1 ....... 37311 .................. BALL VALVE, WATER SYSTEM

2 ....... 570005 ................ CLAMP, MUFFLER

2 ....... 37048 .................. SPRING, WHEEL DRIVE

1 ....... 37162 .................. SPRING, HYDRAULIC SYSTEM

2 ....... 15538 .................. CLAMP, WORM HOSE

1 ....... 574003 ................ ROPE, POINTER

1 ....... 37212 .................. THROTTLE ASSEMBLY

ENGINE PARTS FOR DEUTZ TURBO DIESEL ENGINE

2 ....... 1174416 .............. OIL FILTER, DEUTZ

2 ....... 1174696 .............. FUEL FILTER, DEUTZ

2 ....... P772579 .............. PRIMARY AIR FILTER ELEMENT

2 ....... P775300 .............. SAFETY AIR FILTER, DEUTZ

2 ....... 21004-003 ........... FAN BELT, AX-35

2 ....... 37577 .................. DRIVE BELT, 6G 3VX-500 OPTIBELT

1 ....... 406017 ................ IGNITION SWITCH, W/KEY

2 ....... 406017-1 ............. KEY, IGNITION

Part numbers on this Suggested Spare Parts
List may supercede/replace the P/N's shown in
the test pages of this manual.

PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #0 (11/03/09) — PAGE 7

NAMEPLATES AND DECALS

NAMEPLATES AND DECALS

PAGE 8 — PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #1 (11/03/09)

NAMEPLATES AND DECALS

NAMEPLATES AND DECALS

NO. PART NO. PART NAME QTY. REMARKS

1 25491 DECAL, BLADE ROTATION CW .............................. 1 .................. SAFETY ITEM

2 37742 DECAL, MULTIQUIP PS4030 3

3 37516 DECAL, REFLECTIVE TAPE 1" YELLOW ............... 4.375 ............ SAFETY ITEM

4 SERIAL TAG ............................................................ 1 .................. CONTACT PARTS DEPT.

5 M600002 DECAL, DIESEL FUEL ONLY 1

6 606004 DECAL, GUARD REMOVAL..................................... 2 .................. SAFETY ITEM

7 37161 DECAL, HOT ISO HI-TEMPERATURE .................... 2 .................. SAFETY ITEM

8 13118 DECAL, POWDER COATED 1

9 20525 DECAL, WARNING "PROP 65" 3.25 X 4.25 ............ 1 .................. SAFETY ITEM

10 36092 DECAL, WARNING DIESEL FUEL 3.5 X 1.75 ......... 1 .................. SAFETY ITEM

11 36090 DECAL, WARNING VENTILATION 2 X 4 ................. 1 .................. SAFETY ITEM

12 11912 DECAL, PATENT PENDING 1

13 23330-001 DECAL, CAUTION BELT DRIVE.............................. 2 .................. SAFETY ITEM

14 35137 DECAL, WARNING READ MANUAL ........................ 1 .................. SAFETY ITEM

15 36099 DECAL, PROTECTIVE CLOTHING ISO BLUE ........ 1 .................. SAFETY ITEM

16 37540 DECAL, HYDRAULIC RESERVOIR 1

17 21302 DECAL, WARNING KEEP GUARDS IN PLACE ...... 2 .................. SAFETY ITEM

18 22122-001 DECAL, WARNING RX-W ........................................ 3 .................. SAFETY ITEM

19 25249-001 DECAL, WARNING KEEP HANDS CLEAR ............. 2 .................. SAFETY ITEM

20 25250-001 DECAL, WARNING KEEP FEET CLEAR ................ 2 .................. SAFETY ITEM

21 25678 DECAL, BLADE ROTATION CCW ............................ 1 .................. SAFETY ITEM

PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #0 (11/03/09) — PAGE 9

CONTROL PANEL DECALS

LIGHTS

THROTTLE

TOINCREASE ENGINE SPEED: TURNKNOBCOUNTERCLOCKWISE .
TOREDUCE ENGINE SPEED: TURNKNOB CLOCKWISE.
FORQUICK THROTTLE ACTION: DEPRESSRED BUTTON AND
PUSHOR PULL KNOB.

AUXILIARY

ON

OFF

OFF

CONTROL PANEL DECALS

1

BLADESHAFT

ON

DIS-ENGAGE

ENGAGE

ENGINEPRE-HEAT
GLOWPLUG

SYSTEMS STATUS

IGNITION SWITCH

BLADE SPEED

TACHOMETER

OFF

ON

ENGINE
PRE-HEAT

START

ENGINEWILL
NOTCRANK
WHENE-STOP

BUTTONIS

DEPRESSED

REV

37731

04

OPERATING INSTRUCTIONS

Checkall fluid levels. Secure blade firmly to

BEFORE

bladeshaft.Make sure all protective guards

STARTING:

arein place and properly mounted. Wear eye,
earprotection and protective clothing.

Connectwater supply to water inlet. Move

WATER

waterON/OFF CONTROL to ON position.

SUPPLY:

AdjustWATER FLOW CONTROL lever to

2

BLADES:

STARTING
ENGINE:

STOPPING
ENGINE:

desiredposition. Drain watering system in
coldweather to prevent freezing damage.

Alwaysfollow blade manufacturer's
recommendationsfor blade selection,
speedand application.

WARNING!

NEVERexceed blade manufacturer's
maximumrated RPM. See operator's manual
fordetailed blade mounting instructions.

SetCONTROL HANDLE to NEUTRAL position.
SetTHROTTLE to IDLE. Turn start switch to
ONposition. Wait for glow plug indicator light
togo out. Momentarily turn switch to start
position;release switch as soon as engine
starts.Allow engine to warm up for several
minutesbefore increasing engine speed. Use
approveddiesel fuel only.

Donot stop engine abruptly when hot! Reduce
THROTTLEto IDLE and allow engine to run 1
to2 minutes before turning ignition switch off.
Damageto engine may occur if not allowed to
cooladequately.

TOADJUST DEPTH LOOSEN POINTER KNOB, ROTATE POINTER TO

DESIREDDEPTH AND RETIGHTEN POINTER KNOB TO LOCK IN CUTTING DEPTH.

8

7

6

5

DEPTH STOP

9

220

200

180

160

140

120

100

4

240

10

80

3

11

260

60

12

280

300

20

40

1

2

DEPTH INDICATOR

TOADJUST CUT DEPTH INDICATOR

LOWERSAW UNTIL BLADE CONTACTS

SURFACE,ADJUST DIAL TO ZERO.

mm

0

Inch

0

FORWARD

NEUTRAL

REVERSE

RAISE/LOWER

CONTROL

WATERPUMP

ON

OFF

LOWER

RAISE

PAGE 10 — PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #1 (11/03/09)

CONTROL PANEL DECALS

CONTROL PANEL DECALS

NO. PART NO. PART NAME QTY. REMARKS

1 37731 DECAL, 4030 INSTRUMENT PANEL 1
2 37730 DECAL, 4030 CONSOLE OPERATION 1

PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #0 (11/03/09) — PAGE 11

ELECTRICAL CONTROL ASSY.

ELECTRICAL CONTROL ASSY.

PAGE 12 — PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #1 (11/03/09)

ELECTRICAL CONTROL ASSY.

ELECTRICAL CONTROL ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 406000 SWITCH, ROCKER CH# M-58031-01 2

2 406017 IGNITION SWITCH, WITH KEYS ............................ 1 .................. INCLUDES ITEMS W/

3 37198 EMERGENCY STOP SWITCH ................................ 1 .................. SAFETY ITEM

4 37094 SWITCH, TOGGLE SPDT MOMENTARY ON-ON 1
5 37203 SWITCH, SNAP ACTION ROLLER PLUNGER 1
6 37620 HARNESS, RELAYS AND CIRCUIT BREAKERS 1
7 406021 INDICATOR, ENGINE 1
8 37378 SOLENOID, LIFT PUMP 1
9 933240 WASHER, FLAT SAE 1/4 GRD 9 YZ 2
10 405000 CONNECTOR, 4-WAY SOCKET 1
11 37368 TACHOMETER, ELECTRIC 0-3000 RPM 1
12 8381 BOOT, TOGGLE SWITCH 1
13 406020 BLANK, ROCKER SWITCH 2
14 973752 SCREW, BHHC 1/4 - 20 X 5/8 SS 2
15 37325 SCREW, SHC M5 - 0.8 X 30MM 2
16 37324 NUT, NYLOC M5 - 0.8 2
17 28922-058 WASHER, M5 2
18

406017-1 KEY, IGNITION 1

*

*

PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #0 (11/03/09) — PAGE 13

CONSOLE MOUNTS ASSY.

CONSOLE MOUNTS ASSY.

PAGE 14 — PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #1 (11/03/09)

CONSOLE MOUNTS ASSY.

CONSOLE MOUNTS ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 20742 ISOLATOR, RB2 RING/BUSHING 4
2 20743 WASHER, ISO SNUB KROFUND DYN 148099-18 4
3 575001 RUBBER ISOLATOR, TPC# 60166-1 4
4 37230 MOUNT, ISOLATOR FRONT 2
5 37232 MOUNT, ISOLATOR SIDE 2
6 37608-753 MOUNT, CONSOLE ISOLATOR REAR 2
7 12832 WASHER, SNUBBING 4
8 06503-026 SCREW, HHC 1/2 - 13 X 3-1/4 4
9 0300 A SCREW, HHC 5/16 - 18 X 2 4
10 37579-753 CONSOLE W/A 1
11 37193 INSERT, ISOLATOR MOUNT 4
12 0205 SCREW, HHC 3/8 - 16 X 1 8
13 933242 WASHER, FLAT SAE 3/8 GRD 9 YZ 8
14 TBD SCREW 4
15 TBD WASHER 4

PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #0 (11/03/09) — PAGE 15

REAR CONSOLE ACCESS PANEL ASSY.

REAR CONSOLE ACCESS PANEL ASSY.

PAGE 16 — PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #1 (11/03/09)

REAR CONSOLE ACCESS PANEL ASSY.

REAR CONSOLE ACCESS PANEL ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1

*

2

*

3

*

4

*

5 37584 STRIP, BACKING PLATE SAW CONSOLE 1
6 37220 STRIP, VERTICAL SAW CONSOLE 2
7

*

8

*

9 37616 PANEL ASSEMBLY, REAR SAW ACCESS ............. 1 .................. INCLUDES ITEMS W/

10024 NUT, NYLOC 1/4 X 20 4
10930 WASHER, FENDER 1/4 X 1-1/4 4
12287 SCREW, THP 1/4 - 20 X 3/4 SS 4
29057 DOCUMENT BOX 1

37617-753 PANEL, REAR SAW ACCESS 1
560020 LATCH, REAR SAW ACCESS PANEL 2

*

PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #0 (11/03/09) — PAGE 17

LIGHT CONNECTOR/DASH ACCESS ASSY.

LIGHT CONNECTOR/DASH ACCESS ASSY.

PAGE 18 — PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #1 (11/03/09)

LIGHT CONNECTOR/DASH ACCESS ASSY.

LIGHT CONNECTOR/DASH ACCESS ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 0655 SCREW, HHC 5/16 - 18 X 3/4 6
2

*

3

*

4

*

5 13287 NUT, NYLOC 8-32 2

6 37333 HARNESS, LIGHT KIT ............................................ 1 .................. INCLUDES ITEMS W/

7 37614-753 COVER W/A, CONSOLE DASH ACCESS 1
8 923114 SCREW, SHC 8-32 X 1/2 2
9 933241 WASHER, FLAT SAE 5/16 GRD 9YZ 6
10

11+# 0161 C WASHER, LOCK 5/16 MED 2
12+# 0161 D NUT, HEX 5/16 - 18 2
13+# 0300 A SCREW, HHC 5/16 - 18 X 2 1

14+ 2532 LIGHT ASSEMBLY .................................................. 1 .................. INCLUDES ITEMS W/#

15+ 15503 KNOB, COMFORT GRIP STAR 1
16+ 120206 LIGHT BAR 1
17+ 405001 CONNECTOR PLUG, 4-PIN FEMALE 1
18+ 405002 CORD, LIGHT EXTENDABLE 1
19+ H9406 BULB, GE H9406 1

20 M18004 LIGHT KIT, SAW ...................................................... 1 .................. INCLUDES ITEMS W/+

21+# 11963 BOLT, CARRIAGE 5/16 - 18 X 1 1

12171 SEAL, WEATHERPACK 16-18 GA,GREEN 2
12176 CONNECTOR, WEATHERPACK 2 PIN MALE 1
12179 TERMINAL, WEATHERPACK MALE 14-16 GA 2

405000 CONNECTOR, 4-WAY SOCKET CHROME 1

*

*

PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #0 (11/03/09) — PAGE 19

BELT AND ENGINE GUARDS ASSY.

BELT AND ENGINE GUARDS ASSY.

PAGE 20 — PS4030 MULTIQUIP SAW • PARTS MANUAL — REV. #1 (11/03/09)