Multiquip MS2090HP User Manual

PARTS MANUAL

25500

TRAK-20 SERIES

MODELS: MS2050E1,

MS2050E3, MS2090HP

MASONRY SAWS

(5 HP 1Ø ELECTRIC MOTOR)
(5 HP 3Ø ELECTRIC MOTOR)

(9.0 HP GASOLINE ENGINE)

Revision #6 (03/28/12)

P/N: 25500

PROPOSITION 65 WARNING

Engine exhaust and some of
its constituents, and some dust created
by power sanding, sawing, grinding,
drillingandotherconstructionactivities
contains chemicals known to the State
of California to cause cancer, birth
defects and other reproductive harm.
Some examples of these chemicals are:

PROP 65

Leadfromlead-basedpaints.
Crystallinesilicafrombricks.
Cementandothermasonryproducts.
Arsenicandchromiumfrom chemically
treatedlumber.

Your risk from these exposures varies,
dependingonhowoftenyoudothistype
of work. To reduce your exposure to
these chemicals: work in aALWAYS
well ventilated area, and work with

approved safety equipment, such as

dust masks that are specially designed
to filter out microscopic particles.

PAGE 2 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

COPYRIGHT

NOTES

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 3

STOW TRAK 20 SAW — TABLE OF CONTENTS

STOW TRAK-20
MASONRY SAW

Proposition 65 Warning .................................................... 2

Copyright & Help ............................................................. 3

Table Of Contents ............................................................ 4

Parts Ordering Procedures .............................................. 5

Explanation Of Code In Remarks Column ....................... 6

Suggested Spare Parts ................................................... 7

COMPONENT DRACOMPONENT DRA

COMPONENT DRA

COMPONENT DRACOMPONENT DRA

Name Plate And Decals ............................................... 8-9

Tray Assy. ................................................................. 10-11

Cart Assy. ................................................................ 12-13

Motor Plate & Blade Guard Assy. ............................. 14-15

Electric Motor ........................................................... 16-17

Water Pump Assy. (Electric Motors Only) ............... 18-19

Gasoline Engine Mount Assy. .................................. 20-21

Gasoline Engine Jackshaft Assy. ............................. 22-23

Gasoline Engine Covers Assy. ................................. 24-25

Water Pump Assy. (Gasoline Engines Only) ............ 26-27

Step Pedal Assy. ...................................................... 28-29

WINGSWINGS

WINGS

WINGSWINGS

HONDA GX270QWH2

GASOLINE ENGINE

Air Cleaner Assy. ...................................................... 30-31

Camshaft Assy. ........................................................ 32-33

Carburetor Assy. ....................................................... 34-35

Control Assy. ............................................................ 36-37

Crankcase Cover Assy. ............................................ 38-39

Crankshaft Assy. ...................................................... 40-41

Cylinder Barrel Assy. ................................................ 42-43

Cylinder Head Assy. ................................................. 44-45

Fan Cover Assy. ....................................................... 46-47

Flywheel Assy. ......................................................... 49-50

Fuel Tank Assy. ........................................................ 51-52

Ignition Coil Assy. ..................................................... 53-54

Labels Assy. ............................................................. 55-56

Muffler Assy. ............................................................ 57-58

Piston Assy. ............................................................. 59-60

Recoil Starter Assy. ................................................. 61-62

Terms and Conditions of Sale ........................................ 63

NOTE

Specification and part number
are subject to change without
notice.

PAGE 4 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

PARTS ORDERING PROCEDURES

Ordering parts has never been easier!

Choose from three easy options:

January 1

Effective:

st

, 2006

Best Deal!

Order via Internet (Dealers Only):

Order parts on-line using Multiquip’s SmartEquip website!

N View Parts Diagrams

N Order Parts
N Print Specification Information

Goto www.multiquip.com and click on

Order Parts

Order via Fax (Dealers Only):

All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)

Non-Dealer Customers:
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.

to log in and save!

Order via Phone:

If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.

com.

To obtain an MQ Account, contact your
District Sales Manager for more information.

Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*

Note: Discounts Are Subject To Change

Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*

Note: Discounts Are Subject To Change

Domestic (US) Dealers Call:

1-800-427-1244

International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.

R Dealer Account Number
R Dealer Name and Address
R Shipping Address (if different than billing address)
R Return Fax Number
R Applicable Model Number
R Quantity, Part Number and Description of Each Part

www.multiquip.com

When ordering parts, please supply:

R Specify Preferred Method of Shipment:
UPS/Fed Ex DHL

N Priority One Tr uck 
N Ground
N Next Day
N Second/Third Day

NOTICE

All orders are treated as Standard Orders and will

ship the same day if received prior to 3PM PST.

WE ACCEPT ALL MAJOR CREDIT CARDS!

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 5

STOW TRAK 20 SAW — EXPLANATION OF CODE IN REMARKS COLUMN

The following section explains the different symbols and
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.

NOTICE

The contents and part numbers listed in the parts
section are subject to change without notice. Multiquip
does not guarantee the availability of the parts listed.

SAMPLE PARTS LIST

NO. PART NO. PART NAME QTY. REMARKS

1 12345 BOLT ......................1 .....INCLUDES ITEMS W/%

2% WASHER, 1/4 IN. ...........NOT SOLD SEPARATELY

2% 12347 WASHER, 3/8 IN. ...1 .....MQ-45T ONLY

3 12348 HOSE ..................A/R ...MAKE LOCALLY

4 12349 BEARING ..............1 .....S/N 2345B AND ABOVE

NO. Column

Unique Symbols — All items with same unique

symbol

QTY. Column

Numbers Used — Item quantity can be indicated by a

number, a blank entry, or A/R.

A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.

A blank entry generally indicates that the item is not sold
separately. Other entries will be clarified in the “Remarks”
Column.

REMARKS Column

Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.

Assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.

Indicated by:

“INCLUDES ITEMS W/(unique symbol)”

(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.

Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.

NOTICE

When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.

PART NO. Column

Numbers Used — Part numbers can be indicated by a

number, a blank entry, or TBD.

TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.

A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.

Serial Number Break — Used to list an effective serial
number range where a particular part is used.

Indicated by:

“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”

Specific Model Number Use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.

Indicated by:

“XXXXX ONLY”
“NOT USED ON XXXX”

“Make/Obtain Locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items. Examples include battery cables, shims,
and certain washers and nuts.

“Not Sold Separately” — Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.

PAGE 6 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

STOW TRAK 20 SAW — SUGGESTED SPARE PARTS

TRAK 20 MASONRY SAW

1 TO 3 UNITS

Electric Motor Models

Qty. P/N Description

2 ............ 20478 .................... KNOB, COMFORT GRIP

1 ............ 23783-001 ............ WRENCH, HEX 3/4

4 ............ 21004-005 ............ V-BELT, ELECTRIC MOTOR AX-48

1 ............ 23843-001 ............ WATER PUMP, ELECTRIC MOTOR

4 FT. ...... 23867-006 ............ VINYL WATER TUBING

1 ............ 27036-501 ............ CONVEYOR CART ASSY.

2 ............ 23830-001 ............ BLADE SHAFT BEARING

2 ............ 8136 ...................... BLADE SCREW

2 ............ 5054 A .................. WASHER, LOCK

2 ............ 23832-001 ............ OUTER BLADE FLANGE

2 ............ 23833-001 ............ INNER BLADE FLANGE

2 ............ 18637-001 ............ HANDLE LOCK

TRAK 20 MASONRY SAW

1 TO 3 UNITS

Gasoline Engine Model

Qty. P/N Description

2 ............ 20478 .................... HANDLE GRIP

2 ............ 23830-001 ............ BLADE SHAFT BEARING

2 ............ 8136 ...................... BLADE SCREW

2 ............ 5054 A .................. WASHER, LOCK

1 ............ 23783-001 ............ WRENCH, HEX 3/4

4 ............ 16779-012 ............ V-BELT, DRIVE, 3VX250

4 ............ 16779-004 ............ V-BELT, JACK SHAFT 3VX375

1 ............ 25685-001 ............ STRAINER

1 ............ 27036-501 ............ CONVEYOR CART ASSY.

2 ............ 23833-001 ............ OUTER BLADE FLANGE

2 ............ 23846-001 ............ INNER BLADE FLANGE

2 ............ 18637-001 ............ KNOB, LOCK

3 ............ 17210ZE1505 ....... ELEMENT, AIR CLEANER

3 ............ 9807956846 .......... SPARK PLUG

1 ............ 17620ZH7023 ....... CAP, FUEL FILLER

1 ............ 28462ZE2W11 ...... ROPE, RECOIL STARTER

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 7

NAMEPLATE AND DECALS

STOW TRAK 20 SAW — NAME PLATE AND DECALS

PAGE 8 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

STOW TRAK 20 SAW — NAME PLATE AND DECALS

NAMEPLATE AND DECALS

NO. PART NO. PART NAME QTY. REMARKS

1 PLATE, MODEL/SERIAL NUMBER ..................... 1 ................ CONTACT PARTS DEPT.

2 21302 DECAL, BELT GUARD WARNING 1
3 26180-002 DECAL, TRAK 20 LOGO 2
5 35137 DECAL, READ OPERATORS MANUAL 1
6 20525 DECAL, PROP 65 1
7 25491 DECAL, CW ROTATION 1
8 22972-005 DECAL,STOW LOGO 4
9 27082-001 DECAL, CRANK HANDLE TURN DIRECTION 1
10 22122-001 DECAL, PREVENT SERIOUS INJURY 1
11 25249-001 DECAL, BLADE WARNING 1
12 13118 DECAL, POWDER COATED 1

13 27081 DECAL, EXTENSION CORD SIZE ...................... 1 ................ ELECTRIC MODELS ONLY

14 25215-001 DECAL, ELECTRIC CORD WARNING ................. 1 ................ ELECTRIC MODELS ONLY

15 21302 DECAL, BELT GUARD WARNING........................ 1 ................ GASONLINE MODELS ONLY

16 27083-501 KIT, DECAL 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 9

TRAY ASSY.

STOW TRAK 20 SAW — TRAY ASSY.

PAGE 10 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

STOW TRAK 20 SAW — TRAY ASSY.

TRAY ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 26963-351 FRAME (YELLOW) 1
2 27026-001 CURTAIN, SPLASH 1
3 23853-001 SNAP HOOK, SHOWER CURTAIN 3
4

*

5

*

6

*

7

*

8

*

9 23862-501 RUBBER STOPPER ASSY. ................................. 1 ......... INCLUDES ITEMS W/

10 23783-001 WRENCH, HEX 3/4 1

2509 NUT, WING 1/4 - 20 PLTD 1
12391-004 WASHER, FLAT 1/4 AN970-4 1
23847-001 RUBBER STOPPER 1
0948 WASHER, FLAT SAE 1/4 1
5277 SCREW, HHC 1/4 - 20 X 1-1/2 1

*

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 11

CART ASSY.

STOW TRAK 20 SAW — CART ASSY.

PAGE 12 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

STOW TRAK 20 SAW — CART ASSY.

CART ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1

*

2

*

3

*

4

*

5

*

6

*

7

*

8

*

9

*

10
11
12
13
14
15
16
17

18 27036-501 CART ASSEMBLY .................................. 1 ......... INCLUDES ITEMS W/

23804-003 MAT, RUBBER V-RIB 6.75 X 12.06 IN. 1
23804-004 MAT, RUBBER V-RIB 14.94 X 12.06 IN. 1
27035-001 INSERT, CONVEYOR CART 1
0730 SCREW, HHC 1/4-20 X 1 IN. 4

23793-001 WHEEL, CONVEYOR CART 4
0948 WASHER, FLAT 4
08233-004 NUT, LOCK 1/4 IN. - 20 GRIPCO 7
23796-001 SCREW, RD HD 2
27037-001 SIDE CONVEYOR 1

23866-001 SCREW, HHST, 10-32 x 1/2 IN. 5

*

27032-001 RULER, LONG SIDE 1

*

23795-008 SCREW, HHST 5

*

27033-001 RULER, SHORT 1

*

26076-301 TAPE, ROLL ADHESIVE TRNSFR 8.5 FT.

*

24288-001 GUIDE, CUTTING 1

*

08622-012 SCREW, THUMB 5/16 - 18 X 1-1/2 IN. 1

*

26992-351 CART, CONVEYOR 1

*

*

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 13

STOW TRAK 20 SAW — MOTOR PLATE & BLADE GUARD ASSY.

MOTOR PLATE & BLADE GUARD ASSY.

PAGE 14 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

STOW TRAK 20 SAW — MOTOR PLATE & BLADE GUARD ASSY.

MOTOR PLATE & BLADE GUARD ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 20478 GRIP, HANDLE 1
2 23835-002 TUBE, SPINDLE ASSY. 1
3 16105 SCREW, HEX 5/16-24 x 3/4 IN. 4
5 0300 B WASHER, FLAT 5/16 IN. 4

6 27023-001 BEARING, PILLOW BLOCK ................................ 2 ......... INCLUDES ITEMS W/#

7 2621 ZERK FITTING 3
8 1162 A CAP, GREASE ZERK #2 YLW 3
9# TBD SET SCREW, PILLOW BLOCK 4
10 23834-003 SHAFT, SPINDLE 1
11 07011-017 KEY, WOODRUFF KEY 1
12 0627 KEY, SQUARE 3/16 x 1-1/4 IN. 1
13 06330-006 WASHER, SPRING 1
14 23830-001 BEARING 2
15 23829-002 SPACER 1

16 27030-001 PULLEY, SPINDLE .............................................. 1 ......... ELECTRIC MODELS ONLY

16 28324-001 PULLEY, SPINDLE .............................................. 1 ......... GASOLINE MODELS ONLY

17 10138 SET SCREW, SPINDLE PULLEY 3
18 1284 SCREW, HEX 3/8-16 x 1-1/2 IN. 4
19 10136 WASHER, FLAT 3/8 IN. 5
20 10133 NUT, GRIPPO 3/8-16 IN. 4
21 5291 PIN, CLEVIS 3/8 x 1-1/8 IN. 1
22 0683 PIN, COTTER 3/32 DIA. x 3/4 IN. 1
23 08327-012 YOKE END, ADJUSTABLE 1
24 2199 NUT, JAM 3/8-24 IN. 2
25 27021-001 TIE ROD 1
26 27034-001 BALL JOINT, QUICK DISCONNECT 1
28 0166 A WASHER, LOCK 3/8 IN. 1
29 07037-006 NUT, HEX 3/8-24 IN. 1
30 23867-005 TUBING, VINYL 2
31 25628-001 HOSE CLAMP, BLADE GUARD 2
32 12694-001 HOSE CLAMP 2
33 8136 BOLT, HEX 1/2-20 x 1-1/2 IN. 1
34 5054 A WASHER, LOCK 1
35 23832-001 OUTER FLANGE 1
36 23833-001 INNER FLANGE 1
37 27008-351 BLADE GUARD ASSY. 1
38 17510-002 SNAP RING 2
39 23825-351 MOUNTING PLATE, BLADE GUARD 1
40 0131 A SCREW, HEX 1/4-20 x 3/4 IN. 3
41 0181 B WASHER, LOCK 1/4 IN. 5
42 0948 WASHER, FLAT 1/4 IN. 3
43 26984-351 MOTOR PLATE ASSY. 1
44 0131 A SCREW, HHC 1/4-20 x 3/4 IN. 2
45 27078-001 SPLASH SHIELD, BLADE GUARD 1
46 0949 NUT, HEX 1/4-20 IN. 2

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 15

ELECTRIC MOTOR

STOW TRAK 20 SAW — ELECTRIC MOTOR

PAGE 16 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

STOW TRAK 20 SAW — ELECTRIC MOTOR

ELECTRIC MOTOR

NO. PART NO. PART NAME QTY. REMARKS

1 27022-401 ELECTRIC MOTOR, 5 HP 1Ø .............. 1 ............ INCLUDES ITEMS W/

1 27090-401 ELECTRIC MOTOR, 5 HP 3Ø .............. 1 ............ INCLUDES ITEMS W/

2

*

3 27029-001 PULLEY (MOTOR) 1
4 16193-006 SCREW, SHS 5/16-18 x 3/8 IN. 2
5 27008-351 BELT GUARD 1
6 21004-005 BELT - AX-48 2
7 0948 WASHER, FLAT 1/4 5
8 29710-351 MOUNT, BELT GUARD 1
9 0131 A SCREW, HHC 1/4 - 20 x 1/2 IN. 3
10 0181 B WASHER, LOCK 1/4 IN. 5
11 0949 NUT, HEX 1/4-20 IN. 3
12 1023 SCREW, HHC 3/16-16 x 1-1/2 IN. 4
13 10136 WASHER, FLAT 3/8 IN. 6
14 27016-001 SPACER, MOTOR 2
15 10133 NUT, NYLOC 3/8-16 IN. 6
16 23811-354 BELT TIGHTENER 2
17 10779-011 PLUG, CAP 2
18 0131 A SCREW, HHC 1/4 - 20 x 1/2 IN. 2
19 23865-001 SCREW, SELF-TAP 2
20 24037-501 SWITCHBOX, 1 PHASE 1
21 C799Mp55 SWITCHBOX, 3 PHASE 1
22 27090-001 STARTER 1
23 27090-003 TRIP, UNDER VOLTAGE 1

24 BOLT .................................................... 2 ............ OBTAIN LOCALLY

25 WASHER, FLAT ................................... 2 ............ OBTAIN LOCALLY

26 NUT, HEX ............................................. 2 ............ OBTAIN LOCALLY

27 CA302LN SWITCH 1

6059 B KEY, 1/4 x 2 2

*
*

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 17

STOW TRAK 20 SAW — WATER PUMP ASSY. (ELECTRIC MOTORS ONLY)

WATER PUMP ASSY. (ELECTRIC MOTORs ONLY)

PAGE 18 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

STOW TRAK 20 SAW — WATER PUMP ASSY. (ELECTRIC MOTORS ONLY)

WATER PUMP ASSY. (ELECTRIC MOTORs ONLY)

NO. PART NO. PART NAME QTY. REMARKS

1 23843-001 WATER PUMP, ELECTRIC 1
2 26077-001 FITTING, BRASS 6 BARB 1/4FP 1
3 12694-001 HOSE CLAMP 2
4 23867-006 TUBING, VINYL 5/16 4 FT.
5 14233-002 Y-FITTING 1
6 1662 TIE, CABLE 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 19

STOW TRAK 20 SAW — GASOLINE ENGINE MOUNT ASSY.

GASOLINE ENGINE MOUNT ASSY.

PAGE 20 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

STOW TRAK 20 SAW — GASOLINE ENGINE MOUNT ASSY.

GASOLINE ENGINE MOUNT ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 15101 ENGINE, HONDA 9 H.P. ....................... 1 ........... GX270UQWH2

2 1023 SCREW, HHC 3/8-16 x 1-1/4 IN. 8
3 0166 A WASHER, LOCK 3/8 IN. 4
4 10136 WASHER, FLAT 3/8 IN. 2
5 10133 NUT, GRIPPO 3/8-16 IN. 4
6 29004-351 BASE PLATE, ENGINE MOUNT 1
7 23811-354 BELT TIGHTENER 2
8 10779-011 CAP PLUG 2
9 28275-001 WASHER, FLAT 2

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 21

STOW TRAK 20 SAW — GASOLINE ENGINE JACKSHAFT ASSY.

GASOLINE ENGINE JACKSHAFT ASSY.

PAGE 22 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

STOW TRAK 20 SAW — GASOLINE ENGINE JACKSHAFT ASSY.

GASOLINE ENGINE JACKSHAFT ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 28321-001 BEARINGS, PILLOW BLOCK 2
2 28919-001 JACKSHAFT 1
3 10057-011 KEY, SQUARE 1/4 X 1-1/4 3
4 1162 A CAP, GREASE ZERK #2 YLW 2
5 2621 ZERK, GREASE STR 1/4-28 2
6 1023 SCREW, HEX 3/8-16 x 1-1/4 IN. 4
7 0166 A WASHER, LOCK 3/8 IN. 4
8 28275-001 WASHER, FLAT 3/8 IN. 4
9 28844-001 SUPPORT PLATE, JACKSHAFT 1
10 29005-351 BELT GUARD MOUNT 1
11 28322-003 PULLEY, ENGINE/JACKSHAFT 2
12 16193-006` SCREW, SET 5/16-18 x 3/8 IN. 4
13 16779-012 DRIVE BELT 3VX250 2
14 29007-001 PULLEY, JACKSHAFT 1
15 29008-001 BUSHING, SPLIT TYPE 1
16 0424 SCREW, 1/4-20 X 1-1/4 IN. 3
17 0131 A SCREW, HHC 1/4 - 20 X 3/4 IN. 4
18 0181 B WASHER, LOCK 1/4 IN. 4
19 0949 WASHER, FLAT 1/4 IN. 4
20 28769-351 MOUNTING BRACKET, BELT GUARD 1
21 16779-004 SPINDLE V-BELT 3VX375 2
22 27058-001 SCREW, SQ. HD 3/8-16 x 2.50 IN. 2
23 1456 NUT, HEX 3/8-16 IN. 2

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 23

STOW TRAK 20 SAW — GASOLINE ENGINE COVERS ASSY.

GASOLINE ENGINE COVERS ASSY.

PAGE 24 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

STOW TRAK 20 SAW — GASOLINE ENGINE COVERS ASSY.

GASOLINE ENGINE COVERS ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 28886-351 BELT GUARD, LEFT SIDE 1
2 28178-351 COVER, WATER PUMP 1
3 1579 SCREW, HEX 1/4-20 x 1/2 4
4 0181 B WASHER, LOCK 1/4 IN. 5
5 0948 WASHER, FLAT 3/8 IN. 4
6 28906-351 JACKSHAFT COVER 1
7 0131 A SCREW, HEX 1/4-20 x 3/4 IN. 2
8 0181 B WASHER, LOCK 1/4 IN. 2
9 28928-351 BELT GUARD, JACKSHAFT 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 25

STOW TRAK 20 SAW — WATER PUMP ASSY. (GASOLINE ENGINES ONLY)

WATER PUMP ASSY. (GASOLINE ENGINES ONLY)

PAGE 26 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

STOW TRAK 20 SAW — WATER PUMP ASSY. (GASOLINE ENGINES ONLY)

WATER PUMP ASSY. (GASOLINE ENGINES ONLY)

NO. PART NO. PART NAME QTY. REMARKS

1

*

2

*

3

*

4

*

5

*

6

*

7

*

8

*

9

*

10
11
12
13
14
15
16
17
18
19
20

22 TRAK20WP WATER PUMP KIT ...................................... 1 ........... INCLUDES ITEMS W/

28917-002 PULLEY-WATER PUMP 2" IN. 1
10138 SCREW, SHS 1/4-20 X 1/2 IN. 4
28910-001 SHAFT, PUMP 1
3360 GRIP, PUMP HANDLE 1
10120-010 SCREW, RHM 1/4 - 20 X 5/8 2
28179-001 BRACKET, PUMP MOUNTING 1
0166 A WASHER, LOCK, 3/8 IN. 2
0205 SCREW, HHC 3/8-16 X 1.0 IN. 2
09189-006 BEARING, BALL 2
28916-001 CAP, WATER PUMP 1

*

10136 WASHER, FLAT 3/8 IN. 2

*

60021 HOSE, BRAIDED PVC 3/8 x 5/8 IN............ 1 ........... 24 IN. LENGTH

*

12694-001 HOSE CLAMP 4

*

25874-001 FITTING, PLASTIC STR 6 BARB 2

*

25802-001 BASE, WATER PUMP 1

*

2925 FITTING, PLASTIC 90 6 BARB 1

*

60021 HOSE, BRAIDED PVC 3/8 x 5/8 IN............ 1 ........... 32 IN. LENGTH

*

25875-001 BULB, PRIMER 1

*

60021 HOSE, BRAIDED PVC 3/8 x 5/8 IN............ 1 ........... 8 IN. LENGTH

*

25685-001 STRAINER, INLET 3/8 IN. 1

*

*

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 27

STEP PEDAL ASSY.

STOW TRAK 20 SAW — STEP PEDAL ASSY.

PAGE 28 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

STOW TRAK 20 SAW — STEP PEDAL ASSY.

STEP PEDAL ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 06500-020 SCREW, HEX 5/16-18 x 2-1/2 IN. 1
2 18637-001 KNOB 1
3 0106 JAM NUT 5/16-18 IN. 2
4 23860-001 ACORN NUT 1/2-13 IN. 1
5 23768-001 HANDLE, BLADE HEIGHT ADJ. 1
6 23730-001 WASHER, FLAT 1
7 0424 SCREW, HEX 1/4-20 x 1-1/4 IN. 2
8 23842-001 BEARING-FLANGED 1
9 0181 B WASHER, LOCK 1/4 IN. 2
10 0949 NUT, HEX 1/4-20 IN. 2
11 26976-351 FOOT PEDAL 1
12 27017-001 BOLT, CARRIAGE 1/2-13 x 4 IN. 1
13 968011 NUT, HEX 1/2-13 1
14 14821-005 CLAMP 2
15 23845-002 BELLOWS 1
16 27076-001 ROD, BLADE HEIGHT ADJ. 1
17 27018-351 PIVOT TUBE 1
18 19974 CLEVIS PIN 1/2 DIA. x 1-1/2 IN. 2
19 27025-001 BUSHING 4
20 27024-002 BUSHING, FLANGED 2
21 27024-001 BUSHING, FLANGED 2
22 0447 WASHER, FLAT 1/2 IN. 6
23 27079-002 CLEVIS PIN 1/2 DIA. x 5 IN. 1
24 3216 COTTER PIN 1/8 DIA. x 7/8 IN. 3
25 27012-351 PIVOT BRACKET, STEP PEDAL 1
26 28957-351 PIVOT BRACKET, MOTOR PLATE 1
27 10096-019 SNAP RING 4
28 3264 WASHER, FLAT 1 IN. 4
29 27028-001 EXTENSION SPRING 2
30 2621 ZERK FITTING 1
31 1162 A CAP, GREASE ZERK #2 YLW 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 29

AIR CLEANER ASSY.

GX270QWH2 ENGINE — AIR CLEANER ASSY.

PAGE 30 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — AIR CLEANER ASSY.

AIR CLEANER ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 16271ZE2000 GASKET, ELBOW 1
2 17210ZE3010 ELEMENT, AIR CLEANER 1
2 17210ZE3505 ELEMENT, AIR CLEANER 1
3 17218ZE3000 FILTER (OUTER) 1
3 17218ZE3505 FILTER (OUTER) 1
4 17219HA2405 SEAL, AIR CLEANER COVER 1
4 17219KL4000 SEAL, AIR CLEANER COVER 1
5 17230ZE3841 COVER, AIR CLEANER (CYCLONE) 1
6 17232891000 GROMMET, AIR CLEANER 1
7 17238ZE2310 COLLAR, AIR CLEANER 2
8 17239ZE3840 COLLAR B, AIR CLEANER 1
9 17410ZE3840 ELBOW, AIR CLEANER 1
10 17470ZE3841 CASE, PRE AIR CLEANER 1
11 17475ZE3841 CAP, PRE AIR CLEANER 1
12 17476ZE3841 GUIDE, PRE AIR CLEANER 1
13 90142MB0000 SCREW, PAN (5X16.5) 5
16 90325044000 WINGNUT, TOOL BOX SETTING 2
17 90009ZE2003 BOLT-WASHER (6X22) 1
18 9405006000 NUT, FLANGE (6MM) 2

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 31

CAMSHAFT ASSY.

GX270QWH2 ENGINE — CAMSHAFT ASSY.

PAGE 32 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — CAMSHAFT ASSY.

CAMSHAFT ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 14100ZE3020 CAMSHAFT ASSY. 1
2 14410ZE2013 ROD, PUSH 2
3 14431ZE2010 ARM, VALVE ROCKER 2
4 14441ZE2000 LIFTER, VALVE 2
5 14451ZE1013 PIVOT, ROCKER ARM 2
6 14568ZE1000 SPRING, WEIGHT RETURN 1
7 14711ZE2000 VALVE, IN. 1
8 14721ZE2000 VALVE, EX. 1
9 14751ZE2003 SPRING, VALVE 2
10 14771ZE2000 RETAINER, IN. VALVE SPRING 1
11 14773ZE2000 RETAINER, EX. VALVE SPRING 1
12 14781ZE2000 ROTATOR, VALVE 1
13 14791ZE2010 PLATE, PUSH ROD GUIDE 1
14 90012ZE0010 BOLT, PIVOT (8MM) 2
15 90206ZE1000 NUT, PIVOT ADJ. 2
16 12209ZE8003 SEAL, VALVE STEM 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 33

CARBURETOR ASSY.

GX270QWH2 ENGINE — CARBURETOR ASSY.

PAGE 34 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — CARBURETOR ASSY.

CARBURETOR ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 16010ZE2812 GASKET SET 1
2 16011ZA0931 VALVE SET, FLOAT 1
3 16013ZA0931 FLOAT SET 1
5 16015ZE8005 CHAMBER SET, FLOAT 1
8 16028ZE0005 SCREW SET B 1
9 16044ZE2005 CHOKE SET 1
10 16100ZH9W01 CARBURETOR ASSY. (BE75A B) 1
11 16124ZE0005 SCREW, THROTTLE STOP 1
13 16166ZH9W00 NOZZLE, MAIN 1
14 16173001004 GASKET, FUEL STRAINER CUP 1
15 16211ZE2000 INSULATOR, CARBURETOR 1
16 16220ZA0702 SPACER, CARBURETOR 1
17 16221ZA0800 GASKET, CARBURETOR 1
18 16223ZA0800 GASKET, INSULATOR 1
19 16610ZE1000 LEVER, CHOKE (STD) 1
20 16953ZE1812 LEVER, VALVE 1
21 16954ZE1812 PLATE, LEVER SETTING 1
23 16956ZE1811 SPRING, VALVE LEVER 1
24 16957ZE1812 GASKET, VALVE 1
25 16967ZE0811 CUP, FUEL STRAINER 1
26 93500030060H SCREW, PAN (3X6) 2
27 9430520122 PIN, SPRING (2X12) 1
28 99101ZH80880 JET, MAIN (#88) (OPTIONAL) 1
28 99101ZH80900 JET, MAIN (#90) (OPTIONAL) 1
28 99101ZH80920 JET, MAIN (#92) 1
29 99204ZE00350 JET SET, PILOT (#35) 1
30 16016ZH7W01 SCREW SET 1
31 16024ZE1811 SCREW SET, DRAIN 1
32 16172ZE3W10 COLLAR, SET 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 35

CONTROL ASSY.

GX270QWH2 ENGINE — CONTROL ASSY.

PAGE 36 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — CONTROL ASSY.

CONTROL ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 16551ZE2000 ARM, GOVERNOR 1
2 16555ZE2000 ROD, GOVERNOR 1
3 16561ZE2000 SPRING, GOVERNOR 1
4 16562ZE2000 SPRING, THROTTLE RETURN 1
7 16570ZE2W20 CONTROL ASSY. (REMOTE) 1
10 16571ZE2W00 LEVER, CONTROL 1
11 16574ZE1000 SPRING, LEVER 1
12 16575ZE2W00 WASHER, CONTROL LEVER 1
13 16576891000 HOLDER, CABLE 1
15 16578ZE1000 SPACER, CONTROL LEVER 1
16 16581ZE2W00 BASE, CONTROL 1
17 16584883300 SPRING, CONTROL ADJUSTING 1
19 16592883310 SPRING, CABLE RETURN 1
24 90013883000 BOLT, FLANGE (6X12) (CT200) 2
25 90015ZE5010 BOLT, GOVERNOR ARM 1
27 90114SA0000 NUT, SELF-LOCK (6MM) 1
32 93500050280A SCREW, PAN (5X28) 1
33 93500050160A SCREW, PAN (5X16) 1
35 9405006000 NUT, FLANGE (6MM) 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 37

CRANKCASE COVER ASSY.

GX270QWH2 ENGINE — CRANKCASE COVER ASSY.

PAGE 38 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — CRANKCASE COVER ASSY.

CRANKCASE COVER ASSY.

NO. PART NO. PART NAME QTY. REMARKS

2 11300ZE2600 COVER ASSY., CRANKCASE (Q-TYPE) 1
3 11381ZE2801 GASKET, CASE COVER 1
4 15600735003 CAP ASSY., OIL FILLER 1
6 15600ZG4003 CAP ASSY., OIL FILLER 1
8 15625ZE1003 GASKET, OIL FILLER CAP 2
9 16510ZE2000 GOVERNOR ASSY. (STD) 1
10 16511ZE2000 WEIGHT, GOVERNOR 2
11 16512ZE2000 HOLDER, GOVERNOR WEIGHT 1
12 16513ZE2000 PIN, GOVERNOR WEIGHT 2
13 16531ZE2000 SLIDER, GOVERNOR 1
15 90602ZE1000 CLIP, GOVERNOR HOLDER 1
16 90701HC4000 PIN, DOWEL (8X12) 2
17 91201890003 OIL SEAL (30X46X8) 1
18 9410106800 WASHER, PLAIN (6MM) 1
19 957010803500 BOLT, FLANGE (8X35) 7
20 961006206000 BEARING, RADIAL BALL (6206) 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 39

CRANKSHAFT ASSY.

GX270QWH2 ENGINE — CRANKSHAFT ASSY.

PAGE 40 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — CRANKSHAFT ASSY.

CRANKSHAFT ASSY.

NO. PART NO. PART NAME QTY. REMARKS

2 13310ZH9600 CRANKSHAFT (Q-TYPE) 1
12 90745ZE2600 KEY (6.3X6.3X43) 1
13 91001ZH9003 BEARING, RADIAL BALL (6206 SH) 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 41

CYLINDER BARREL ASSY.

GX270QWH2 ENGINE — CYLINDER BARREL ASSY.

PAGE 42 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — CYLINDER BARREL ASSY.

CYLINDER BARREL ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 12000ZH9802 CYLINDER ASSY. (ALERT) 1
2 15510ZE2043 SWITCH ASSY., OIL LEVER 1
3 16541ZE2010 SHAFT, GOVERNOR ARM 1
6 90131896650 BOLT, DRAIN PLUG 2
7 90446KE1000 WASHER (8.2X17X0.8) 1
9 91201890003 OIL SEAL (30X46X8) 1
10 91353671003 O-RING (13.5X1.5) (ARAI) 1
11 9405010000 NUT, FLANGE (10MM) 1
12 9410912000 WASHER, DRAIN PLUG (12MM) 2
13 9425110000 PIN, LOCK (10MM) 1
14 957010601200 BOLT, FLANGE (6X12) 2
16 34150ZH7003 ALERT UNIT, OIL 1
17 90013883000 BOLT, FLANGE (6X12) (CT200) 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 43

CYLINDER HEAD ASSY.

GX270QWH2 ENGINE — CYLINDER HEAD ASSY.

PAGE 44 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — CYLINDER HEAD ASSY.

CYLINDER HEAD ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 12200ZH9000 CYLINDER HEAD 1
2 12204ZE2306 GUIDE, VALVE (OS) (OPTIONAL) 1
3 12205ZE2305 GUIDE, EX. VALVE (OS) (OPTIONAL) 1
4 12216ZE2300 CLIP, VALVE GUIDE 1
5 12251ZH9000 GASKET, CYLINDER HEAD 1
6 12310ZE3791 COVER, HEAD 1
7 12315ZE3840 TUBE, BREATHER 1
8 12391ZE2020 GASKET, CYLINDER HEAD COVER 1
9 14775ZE2010 SEAT, VALVE SPRING 1
10 17316611000 CLIP, BREATHER TUBE 2
11 90014ZE2000 BOLT, HEAD COVER 1
12 90042ZE2000 BOLT, STUD (8X123) 2
13 92900080320E BOLT 2, STUD (8X32) 2
14 90441ZE2010 WASHER, HEAD COVER 1
15 9430112200 PIN A, DOWEL (12X20) 2
16 957011008000 BOLT, FLANGE (10X80) 4
16 957251008000 BOLT, FLANGE (10X80) 4
17 9807955846 SPARK PLUG (BPR5ES) (NGK) (OPTIONAL) 1
17 9807955855 SPARK PLUG (W16EPR-U) (DENSO) (OPTIONAL) 1
17 9807956846 SPARK PLUG (BPR6ES) (NGK) 1
17 9807956855 SPARK PLUG (W20EPR-U) (DENSO) 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 45

FAN COVER ASSY.

GX270QWH2 ENGINE — FAN COVER ASSY.

PAGE 46 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — FAN COVER ASSY.

FAN COVER ASSY.

NO. PART NO. PART NAME QTY. REMARKS

3 16731ZE2003 CLIP, TUBE 1
5 19610ZE2010ZC COVER, FAN *NH1* (BLACK) 1
7 19631ZE2D00 SHROUD 1
11 36100ZH7003 SWITCH ASSY., ENGINE STOP 1
17 90013883000 BOLT, FLANGE (6X12) (CT200) 5
18 90013883000 BOLT, FLANGE (6X12) (CT200) 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 47

FLYWHEEL ASSY.

GX270QWH2 ENGINE — FLYWHEEL ASSY.

PAGE 48 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — FLYWHEEL ASSY.

FLYWHEEL ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 19511ZE2000 FAN, COOLING 1
3 28450ZE2W11 PULLEY, STARTER (SCREEN GRID) 1
5 31100ZE2010 FLYWHEEL 1
8 90201ZE3V00 NUT, SPECIAL (16MM) (1) 1
9 90741ZE2000 KEY, SPECIAL WOODRUFF (25X18) 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 49

FUEL TANK ASSY.

GX270QWH2 ENGINE — FUEL TANK ASSY.

PAGE 50 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — FUEL TANK ASSY.

FUEL TANK ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 16854ZH8000 RUBBER, SUPPORTER (107MM) 1
2 16955ZE1000 JOINT, FUEL TANK 1
5 17510ZE2010ZD TANK, FUEL *NH1* (BLACK) 1
7 17620ZH7023 CAP, FUEL FILLER 1
12 91353671003 O-RING (13.5X1.5) (ARAI) 1
14 9405008000 NUT, FLANGE (8MM) 2
15 950014500360M BULK HOSE, FUEL (4.5X3000) (4.5X222) 1
16 9500202080 CLIP, TUBE (B8) 2
17 957010802500 BOLT, FLANGE (8X25) 2
22 17631ZH7003 GASKET, FUEL FILLER CAP 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 51

IGNITION COIL ASSY.

GX270QWH2 ENGINE — IGNITION COIL ASSY.

PAGE 52 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — IGNITION COIL ASSY.

IGNITION COIL ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 16854ZH8000 COIL ASSY., IGNITION 1
4 30700ZE1013 CAP ASSY., NOISE SUPPRESSOR 1
8 31512ZE2000 GROMMET, WIRE 1
10 36101ZE1010 WIRE, STOP SWITCH (370MM) 1
13 90015883000 BOLT, FLANGE (6X28) 2
18 90684ZA0601 CLIP, WIRE HARNESS 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 53

LABELS ASSY.

GX270QWH2 ENGINE — LABELS ASSY.

PAGE 54 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — LABELS ASSY.

LABELS ASSY.

NO. PART NO. PART NAME QTY. REMARKS

3 87521ZH9010 EMBLEM (INTERNAL) 1
7 87522ZH9000 LABEL, CAUTION 1
10 87528ZE2810 MARK, CHOKE (EXTERNAL) 1
17 87532ZH8810 MARK, OIL ALERT (E) 1
21 87534ZE1841 LABEL, AIR CLEANER CAUTION 1
22 87535ZE1840 MARK, AIR CLEANER SALES POINT 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 55

MUFFLER (2) ASSY.

GX270QWH2 ENGINE — MUFFLER ASSY.

PAGE 56 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — MUFFLER ASSY.

MUFFLER ASSY.

NO. PART NO. PART NAME QTY. REMARKS

2 18310ZE2W61 MUFFLER (100DB) 1
3 18320ZE2W61 PROTECTOR, MUFFLER 1
5 18330ZH9N00 PIPE, EX. 1
6 18331ZE2810 CAP, MUFFLER 1
7 18333ZF6W01 GASKET, EX. PIPE 1
8 18355ZE2W00 ARRESTER, SPARK (OPTIONAL) 1
9 18381ZE2W10 GASKET, MUFFLER (ARRESTER) (OPTIONAL) 1
10 18381ZE2800 GASKET, MUFFLER 1
19 90050ZE1000 SCREW, TAPPING (5X8) 4
22 90055ZE1000 SCREW, TAPPING (4X6) 3
26 90006ZE2000 SCREW, TAPPING (6X10) 1
27 9405008000 NUT, FLANGE (8MM) 5
31 90055ZE1000 SCREW, TAPPING (4X6) (OPTIONAL) 1

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 57

PISTON ASSY.

GX270QWH2 ENGINE — PISTON ASSY.

PAGE 58 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — PISTON ASSY.

PISTON ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 13010ZE8601 RING SET, PISTON (STD) 1
1 13011ZE8601 RING SET, PISTON (OS 0.25) (OPTIONAL) 1
1 13012ZE8601 RING SET, PISTON (OS 0.50) (OPTIONAL) 1
1 13013ZE8601 RING SET, PISTON (0.75) (OPTIONAL) 1
2 13101ZH9000 PISTON (STD) 1
2 13102ZH9000 PISTON (OS 0.25) (OPTIONAL) 1
2 13103ZH9000 PISTON (OS 0.50) (OPTIONAL) 1
2 13104ZH9000 PISTON (0.75) (OPTIONAL) 1
3 13111ZE2000 PIN, PISTON 1
4 13200ZE2010 ROD ASSY., CONNECTING (STD) 1
4 13200ZE2305 ROD ASSY., CONNECTING (US 0.25) (OPTIONAL) 1
5 90001ZE8000 BOLT, CONNECTING ROD 2
6 90551ZE1000 CLIP, PISTON PIN (18MM) 2

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 59

RECOIL STARTER ASSY.

GX270QWH2 ENGINE — RECOIL STARTER ASSY.

PAGE 60 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

GX270QWH2 ENGINE — RECOIL STARTER ASSY.

RECOIL STARTER ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 28400ZE2W01ZB STARTER ASSY., RECOIL *NH1* (BLACK) 1
2 28410ZE2W01ZB CASE, RECOIL STARTER *NH1* (BLACK) 1
3 28421ZE2W01 PULLEY, RECOIL STARTER 1
4 28422ZE2W01 RATCHET, STARTER 2
5 28441ZE2W01 SPRING, FRICTION 1
6 28442ZE2W01 SPRING, STARTER RETURN 1
7 28443ZE2W01 SPRING, RATCHET 2
8 28444ZE2W01 RETAINER, SPRING 1
10 28461ZE2W02 GRIP, STARTER 1
11 28462ZE2W11 ROPE, RECOIL STARTER 1
13 90004ZE2W01 SCREW, CENTER 1
14 90008ZE2003 BOLT, FLANGE (6X10) 3

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 61

Effective: July 15, 2003

TERMS AND CONDITIONS OF SALE — PARTS

Terms and Conditions of Sale

STOW Construction Equipment

PAYMENT TERMS

Terms of payment for unit sales are 2% 15 days
net 30 days from date of invoice unless
otherwise specifically stated on our invoice. Parts
invoices have terms of net 10 days. Minimum
parts billing is $15.00 net.

Applicable discounts will be computed on
merchandise value only. Late charges will be
assessed at prevailing rates. Cash discounts
cannot be taken on current billings if any
previously billed amounts are past due.

FREIGHT POLICY

Freight policy is established to offer customers
every advantage possible. Due to bulk freight
ratings on some equipment and other shipping
considerations, freight policies differ by
equipment type. Actual back freight may be
charged for shipments originating from other
than specified FOB warehouses. See Freight
Policy for details.

All STOW domestic sales are FOB nearest
available designated MQ/STOW warehouse.
Export orders are ex-works factory located in
Carson, CA or Boise, ID.

Additions to orders already shipped cannot be
accepted for freight minimums.

Should STOW elect to make partial shipments
of an order originally complying with the “freight
allowed” requirements, transportation charges
will be absorbed by STOW on any subsequent
shipment applying to that order.

All other orders will be shipped collect or prepaid
with charges added to the invoice. STOW’s
responsibility ceases when a signed manifest
has been obtained from the carrier, and any
claim for shortage or damage must be settled
between the consignee and the carrier.

Parts: FOB Carson, California or Boise, Idaho.
See Freight Policy for details and
additional discounts.

DROP SHIPMENTS

STOW reserves the right to refuse Drop
Shipments outside the normal service area of
the purchasing dealer.

FIELD WAREHOUSES

Field Warehouses are currently located in
California, Georgia, Idaho, Iowa, and New Jersey

SPECIAL EXPEDITING SERVICE

The higher of a $35.00 surcharge or actual costs
will be added to the invoice for special handling,
including bus shipments, or in cases where
STOW personnel must personally deliver the
equipment or parts to the carrier.

RETURNED GOODS POLICY

Return shipments may be accepted and credit
allowed, subject to the following provisions.

1. A Returned Material Authorization (RMA)
must be approved by STOW prior to shipment.
Approvals for returned goods must be with
just cause and are at the
sole discretion of STOW. A copy of the
Authorization must accompany the shipment
to the designated Warehouse.

2. Parts being returned must be listed as
currently supplied on the current parts list.

3. Parts must be in new and resalable condition
in the original package, with part numbers
clearly marked.

4. Units and accessories must be current
models in the latest price list and in new and
resalable condition.

5. Special order items are not returnable for
credit.

6. Credit on returned parts and units will be
issued at actual dealer net price at time of
purchase less 15% restocking charge.

7. All returned shipments are to be made to the
STOW designated receiving point, freight
prepaid at the sender’s expense.

The sender will be notified of any material
received that does not meet the above provisions.
Such material will be held for 30 days from
notification pending instructions. If a reply is not
received within 30 days, the material will be
returned to the sender at his expense with no
credit issued.

PRICING, REBATES AND SPECIFICATIONS

Every effort will be made to provide adequate
notice of changes; however, prices and
equipment specifications are subject to change
without notice.

Price changes are effective on a specific date
and all orders received on or after that date will
be billed at the revised price.

Rebates for price reductions and added charges
for price increases will not be made for stock in
dealer inventory at the time of a price change.

STOW reserves the right to quote and sell direct
to Government agencies and to Original
Equipment Manufacturer accounts who use our
products as integral parts of their own products.

LIMITATION OF SELLER’S LIABILITY

STOW shall not be liable hereunder for damages
in excess of the purchase price of the item with
respect to which damages are claimed and in
no event shall STOW be liable for loss of profit or
good will or for any other special, consequential or
incidental damages.

LIMITATION OF WARRANTIES

There are no warranties, express or implied,
made by STOW. hereunder on Products
manufactured or distributed by it except the
warranty against defects in material and
workmanship on new Products to the original
purchaser, as set forth in the STOW New Product
Limited Warranty.

STOW CONSTRUCTION EQUIPMENT

POST OFFICE BOX 6254
CARSON, CALIFORNIA 90749
310-661-4242 • 877-BUY-STOW
FAX: [phone]

Atlanta • Boise • Newark • Quebec, Canada

Manchester, UK • Rio de Janeiro, BR • Puebla, MX

E-MAIL: [e-mail]
www.stowmfg.com

PAGE 62 — STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12)

NOTE PAGE

STOW TRAK-20 SAW — PARTS MANUAL — REV. #6 (03/28/12) — PAGE 63

PARTS MANUAL

©

HERE’S HOW TO GET HELP

PLEASE HAVE THE MODEL AND SERIAL

NUMBER ON-HAND WHEN CALLING

UNITED STATES

Multiquip Corporate Office MQ Parts Department

18910 Wilmington Ave.
Carson, CA 90746
Contact: [e-mail]

Service Department Warranty Department

Tel. [phone]
Fax [phone]

800-427-1244
310-537-3700

Fax: [phone]
Fax: [phone]

800-421-1244
310-537-3700

Technical Assistance

800-478-1244 Fax: [phone]

Fax: [phone]

310-537-3700

Fax: [phone]

MEXICO UNITED KINGDOM

MQ Cipsa Multiquip (UK) Limited Head Office

Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla 72760 Mexico
Contact: [e-mail]

Tel: [phone]
Fax: [phone]

Unit 2, Northpoint Industrial Estate,
Globe Lane,
Dukinfield, Cheshire SK16 4UJ
Contact: [e-mail]

Tel: [phone]
Fax: [phone]

CANADA

Multiquip

4110 Industriel Boul.
Laval, Quebec, Canada H7L 6V3
Contact: [e-mail]

COPYRIGHT 2011, MULTIQUIP INC.

Multiquip Inc
are the property of their respective owners and used with permission.

This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.

The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.

, the MQ logo and the Stow logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks

Tel: [phone]
Tel: [phone]
Fax: [phone]

Your Local Dealer is:

P/N: 25500