Multiquip EM-90S, EM-90P User Manual

PARTS MANUAL

SERIES

MODEL EM-90S (STEEL)

MODEL EM-90P (PLASTIC)

PLASTER AND MORTAR MIXER

(GASOLINE ENGINE/ELECTRIC MOTOR)

Revision #6 (01/05/07)

EM-90 S/P PLASTER/MORTAR MIXER — PROPOSITION 65 WARNING

Engine exhaust and some of
its constituents, and some dust created
by power sanding, sawing, grinding,
drillingandotherconstructionactivities
contains chemicals known to the State
of California to cause cancer, birth
defects and other reproductive harm.
Some examples of these chemicals are:

Leadfromlead-basedpaints.
Crystallinesilicafrombricks.
Cementandothermasonryproducts.
Arsenicandchromiumfrom chemically
treatedlumber.

Your risk from these exposures varies,
dependingonhowoftenyoudothistype
of work. To reduce your exposure to
these chemicals: work in aALWAYS
well ventilated area, and work with

approved safety equipment, such as

dust masks that are specially designed
to filter out microscopic particles.

PAGE 2 — EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07)

EM-90 S/P PLASTER/MORTAR MIXER — TABLE OF CONTENTS

MQ-ESSICK — EM-90S/P
Plaster/Mortar Mixer

Proposition 65 Warning ............................................ 2

Table Of Contents .................................................... 3

Parts Ordering Procedures ...................................... 4

Explanation of Code In Remarks Column................ 6

Suggested Spare Parts ............................................ 7

Component Drawings

Nameplate and Decals.......................................... 8-9

Frame Assembly ...............................................10-11

Paddle Shaft Assembly ..................................... 12-13

Steel Drum Assembly........................................ 14-15

Plastic Drum Assembly ..................................... 16-17

Drum & Paddle Shaft Complete Assy. (Poly) .....18-19

Drum & Paddle Shaft Complete Assy. (Steel) ...20-21

Axle Assembly ...................................................22-23

Engine Assembly ..............................................24-25

Electric Motor Assembly.................................... 26-27

Cabinet Assembly ............................................. 28-29

HONDA GX240K1HA2 ENGINE

Air Cleaner Assembly........................................ 30-31

Camshaft Assembly ..........................................32-33

Carburetor Assembly ........................................ 34-35

Control Assembly ..............................................36-37

Crankcase Cover Assembly ..............................38-39

Crankshaft Assembly ........................................40-41

Cylinder Barrel Assembly ..................................42-43

Cylinder Head Assembly ...................................44-45

Fan Cover Assembly ......................................... 46-47

Flywheel Assembly ...........................................48-49

Muffler Assembly ..............................................50-51

Fuel Tank Assembly .......................................... 52-53

Ignition Coil ....................................................... 54-55

Piston Assembly ................................................56-57

Recoil Starter ....................................................58-59

Gear Reduction Assembly ................................60-61

Label Assembly .................................................62-63

Terms and Conditions of Sale — Parts .................. 64

NOTE

Specifications and are
subject to change
without notice.

EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07) — PAGE 3

Effective: June 1st, 2005

Ordering parts has never been easier!

PARTS ORDERING PROCEDURES

Choose from three easy options:

Best Deal!

Order via Internet (Dealers Only):

Order parts on-line using Multiquip’s SmartEquip website!

■

View Parts Diagrams

■

Order Parts

■

Print Specification Information

Goto www.multiquip.com and click on

Order Parts

to log in and save!

Order via Fax (Dealers Only):

All customers are welcome to order parts via Fax.

Domestic (US) Customers dial:

1-800-6-PARTS-7 (800-672-7877)

Non-Dealer Customers:

Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.

Order via Phone:

If you have an MQ Account, to obtain a
Username and Password, E-mail us at:

[e-mail].

To obtain an MQ Account, contact your
District Sales Manager for more information.

internet

Use the
on

Standard orders

complete part numbers.*

Fax

your order in and qualify for a 3% Discount

on

Standard orders

complete part numbers.*

Domestic (US) Dealers Call:

1-800-427-1244

and qualify for a 5% Discount

for all orders which include

for all orders which include

International Customers

their local Multiquip Representatives for
Parts Ordering information.

Note: Discounts Are Subject To Change

Note: Discounts Are Subject To Change

should contact

❒❒

❒

❒❒

❒❒

❒

❒❒

❒❒

❒

❒❒

❒❒

❒

❒❒
❒❒

❒

❒❒

❒❒

❒

❒❒

www.multiquip.com

PAGE 4 — EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07)

When ordering parts, please supply:

Dealer Account Number

Dealer Name and Address

Shipping Address (if different than billing address)

Return Fax Number
Applicable Model Number

Quantity, Part Number and Description of Each Part

NOTE

Unless otherwise indicated by customer, all orders are treated as
within 24 hours. We will make every effort to ship
if received prior to 2PM PST.

WE ACCEPT ALL MAJOR CREDIT CARDS!

❒❒

❒

❒❒

Stock Orders

Specify Preferred Method of Shipment:

✓

Fed Ex/UPS

■

Priority One

■

Ground

■ Next Day

■

Second/Third Day

Air Shipments

must be noted on fax or web order form.

✓ DHL
✓

Truck

Standard Orders

the same day the order is received,

and will ship

NOTE PAGE

EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07) — PAGE 5

EXPLANATION OF CODE IN REMARKS COLUMN

How to read the marks and remarks used in this parts
book.

NOTE

Items Found In the “Remarks” Column

Serial Numbers-Where indicated, this indicates a serial
number range (inclusive) where a particular part is used.

Model Number-Where indicated, this shows that the
corresponding part is utilized only with this specific model
number or model number variant.

Items Found In the “Items Number” Column

The contents of this parts
catalog are subject to
change without notice

.

All parts with same symbol in the number column,

>

, belong to the same assembly or kit.

If more than one of the same

NOTE

reference number is listed, the
last one listed indicates newest
(or latest) part available.

, #, +, %, or

*

PAGE 6 — EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07)

EM-90 S/P MIXER— SUGGESTED SPARE PARTS

WM-90P/S PLASTER AND MORTAR MIXER 1 TO 3
UNITS WITH HONDA GX240K1HA2 ENGINE

Qty. ... P/N ...................... Description

6 ....... 505834 ................ V-BELT A36 HONDA ENGINE

6 ....... 491112 ................ V-BELT A40 ELECTRIC MOTOR

2 ....... EM914288 ........... OIL SEAL, AXLE

4 ....... EM903113 ........... BEARING, CONE, AXLE

4 ....... EM903112 ........... BEARING, CUP, AXLE

4 ....... 507844 ................ SPRING COMPRESSION

4 ....... EM200285 ........... GLAND, PACKING HALF

12 ..... EM200301 ........... RING, SHAFT PACKING

4 ....... 505065 ................ CARRIAGE BOLT 3/8" NC X 3" (STEEL)

3 ....... 17210ZE2515 ...... ELEMENT, AIR CLEANER

3 ....... 9807956846 ......... SPARK PLUG

1 ....... 28462ZE2W11 ..... ROPE, RECOIL STARTER

1 ....... 17620ZH7023 ...... CAP, FUEL TANK

2 ....... EM200863 ........... KIT, WIPER BLADES (STEEL DRUM)

2 ....... EM204625 ........... KIT, WIPER BLADES (PLASTIC DRUM)

NOTE

Part numbers on this
Suggested Spare Parts List
may supercede/replace the P/
N's shown in the test pages of
this manual.

EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07) — PAGE 7

NAMEPLATE AND DECALS

EM-90 S/P MIXER— NAMEPLATE AND DECALS

PAGE 8 — EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07)

EM-90 S/P MIXER— NAMEPLATE AND DECALS

NAMEPLATE AND DECALS

NO PART NO PART NAME QTY. REMARKS

1 DCL151 DECAL, TOWING INSTRUCTIONS 2
2 EM948630 DECAL, PUSH TO STOP 1
3 CIPDCL160 DECAL, CRUSH WARNING 2
4 EM510891 DECAL, ESSICK LOGO (SMALL) 3
5 948501 DECAL, SAFETY INSTRUCTIONS 1
6 35137 DECAL, WARNING READ 1
7 EM510883 DECAL, ESSICK LOGO (LARGE) 3
9 513479 DECAL, WARNING SAFETY GRATE 1
9 DCL335 DECAL, CRUSH WARNING SAFETY GRATE 1
10 DCL280 DECAL, WARNING DUMP HANDLE 1
11 513522 DECAL, DRUM LOCK 1
12 13118 DECAL, POWDER COATED 1
13 948121 DECAL, SELF-ADJUSTING SEALS 1

14 NAMEPLATE ........................................................ 1 ......... CONTACT PARTS DEPT.

EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07) — PAGE 9

FRAME ASSY.

EM-90 S/P MIXER— FRAME ASSY.

PAGE 10 — EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07)

EM-90 S/P MIXER— FRAME ASSY.

FRAME ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 514842 LOCK PIN UNIT 1
2 491692 COTTER PIN 1
3 530023 SPRING LOCKING PIN 1
4 507444 WASHER, FLAT 3/4" 1
5 514835 MAIN FRAME 1
7 514836 HANDLE, CLUTCH ENGAGE 1
8 EM963692 BOLT 1/2" UNC 1-1/2" 6
9 492584 NUT, LOCK 1/2" 6
10 514802 AXLE, UNIVERSAL 1
11 10176 LOCK NUT 1/2" NC 1
12 EM124 BOLT 1/2"-13 X 4 G5 1
13

*

14
14

14A*516580 CLEVIS SAFETY HOOK ............................................ 1 ................... AFTER JANUARY 2006

15 13363KIT CHAIN AND LINK KIT ................................................. 1 ................... INCLUDES ITEMS W/

16 HBC-1 BALL HITCH 2-INCH ................................................... 1 ...................CONTACT UNIT SALES

17 HLC-1 LOOP HITCH .............................................................. 1 ................... CONTACT UNIT SALES

18 HPC-1 PIN HITCH 1-INCH...................................................... 1 ................... CONTACT UNIT SALES

01004 CONNECTOR LINK ..................................................... 2 ................... BEFORE JANUARY 2006

*

01004 CONNECTOR LINK ..................................................... 1 ................... AFTER JANUARY 2006

*

SAFETY CHAIN 1

*

EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07) — PAGE 11

PADDLE SHAFT ASSY.

EM-90 S/P MIXER— PADDLE SHAFT ASSY.

PAGE 12 — EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07)

EM-90 S/P MIXER— PADDLE SHAFT ASSY.

PADDLE SHAFT ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 514753 PADDLE SHAFT 1
2 492584 NUT, LOCK 1/2" 6
3 EM200295 PADDLE ARM, CENTER ENGINE END 1
4 510721 BOLT, 1/2 " X 6" G5 2
5 EM200292 INSERT, PADDLE ARM 4
6 EM200296 PADDLE ARM, ENGINE END 1
7 504322 WASHER, FLAT 1/2" 6
8 EM200297 U-BOLT, END PADDLES 2
9 EM200294 PADDLE ARM, CENTER TOW END 1
10

# 492367 SCREW, HHC 5/16-18 X 1-3/4 G5 14

*

11

# EM923023 WASHER, FLAT 5/16" 28

*

12# EM507519 BLADE, SIDE, POLY .................................................. 4 ................... PLASTIC DRUM

12
13
14
15
16 EM200293 PADDLE ARM, TOW END 1
17

18# EM507518 BLADE, PLASTIC END .............................................. 4 ................... PLASTIC DRUM

18

19 EM200863 KIT, WIPERS, SCRAPPERS & HDWARE ................... 1 ................... INCLUDES ITEMS W/

19 EM204625 KIT, WIPERS, SCRAPPERS & HDWARE ................... 1 ................... INCLUDES ITEMS W/#

EM200212 BLADE, SIDE, RUBBER ............................................. 4 ................... STEEL DRUM

*

# EM203432 BLADE, SIDE, SCRAPPER ........................................ 4 ...................STEEL & PLASTIC DRUM

*

# 2105164 NUT, HEX 5/16" NC G5 14

*

# EM923343 WASHER, LOCK 5/15" 14

*

# EM203433 BLADE ,SCRAPPER END .......................................... 4 ................... STEEL & PLASTIC DRUM

*

EM200213 BLADE, RUBBER END ............................................... 4 ................... STEEL DRUM

*

STEEL DRUM ............................................................. 1

PLASTIC DRUM.......................................................... 1

*

EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07) — PAGE 13

STEEL DRUM ASSY.

EM-90 S/P MIXER— STEEL DRUM ASSY.

PAGE 14 — EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07)

EM-90 S/P MIXER— STEEL DRUM ASSY.

STEEL DRUM ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 530028 DRUM BEARING BRACKET 2
2 3249 CAP, DUST 1

3 20561-001 BEARING SEALED ........................................... 2 ........... SET SCREWS AND BEARING

.......................................................................................... COLLAR CANNOT BE PURCHASED

.......................................................................................... SEPARATELY.

4 491008 CAP, GREASE FITTING 2
5 EM916019 FITTING, GREASE 2
6 EM969013 NUT, LOCK 3/8" 12
7 3019092 WASHER, FLAT 3/8" 4
8 507844 SPRING, COMPRESSION 4
9 EM200288 PLATE, PACKING GLAND PRESSURE 2
10 EM200285 GLAND, PACKING HALF 4
11 EM200301 RING, SHAFT PACKING 12
12 EM200303 FOLLOWER, PACKING RING 2
13 EM966048 CARRIAGE BOLT 3/8" NC X 1-1/4" 8
14 514761 DRUM, STEEL 1
15 EM961019 SET SCREW 2
16 530043 MAIN GEAR 1
17 501016 KEY, 3/8" X 88 MM 1
18 17985-012 CARRIAGE BOLT 3/8-16 X 1-1/2" 4
19 514753 SHAFT, PADDLE 1
20 492600 WASHER, FLAT 1/2" 4
21 514945 LIFT BAR 1
22 EM925191 PIN, COTTER 1
23 514946 GRATE 1
24 505070 PIN, COTTER 2
25 492556 HEX NUT 1/2" G5 2
26 6109180 WASHER, LOCK 1/2" 2
27 EM963692 BOLT 1/2" UNC 1-1/2" 2
28 EM963102 CAPSCREW, HHCS 1/2" NC X 1-1/4" 1
29 492584 NUT, LOCK1/2" NC 1
30 EM201537 HANDLE DUMP 1
31 EM98195 GRIP, DUMP HANDLE 1
32 EM969012 NUT, STOP 8
33 514760 DRUM HEAD 2
34 EM200287 ADJUSTABLE NUT, 3/8" 4
35 0401450160 WASHER, FLAT 5/8" 4
36 EM200286 CARRIAGE BOLT 3/8" NC X 3" 4

EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07) — PAGE 15

PLASTIC DRUM ASSY.

EM-90 S/P MIXER— PLASTIC DRUM ASSY.

PAGE 16 — EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07)

EM-90 S/P MIXER— PLASTIC DRUM ASSY.

PLASTIC DRUM ASSY.

NO. PART NO. PART NAME QTY. REMARKS

1 530028 DRUM BEARING BRACKET 2
2 3249 CAP, DUST 1

3 20561-001 BEARING SEALED ................................................... 2 ............ SET SCREWS AND BEARING

................................................................................................... COLLAR CANNOT BE PURCHASED

................................................................................................... SEPARATELY.

4 491008 CAP, GREASE FITTING 2
5 EM916019 FITTING, GREASE 2
6 EM969013 NUT, LOCK 3/8" 20
7 3019092 WASHER, FLAT 3/8" 6
8 507844 SPRING, COMPRESSION 4
9 EM200288 PLATE, PACKING GLAND PRESSURE 2
10 EM200285 GLAND, PACKING HALF 4
11 EM200301 RING, SHAFT PACKING 12
12 EM200303 FOLLOWER, PACKING RING 2
13 506900 SUPPORT BRACKET 2
14 EM506310 DRUM, PLASTIC 1
15 EM961019 SET SCREW 2
16 530043 MAIN GEAR 1
17 501016 KEY, 3/8" X 88 MM 1
18 17985-012 CARRIAGE BOLT 3/8-16 X 1-1/2" 4
19 514753 SHAFT, PADDLE 1
20 492600 WASHER, FLAT 1/2" 1
21 514947 LIFT BAR 1
22 EM925191 PIN, COTTER 1
23 EM507417 GRATE, MOVEABLE 1
24 505070 PIN, COTTER 2
25 492556 HEX NUT 1/2" G5 2
26 6109180 WASHER, LOCK 1/2" 2
27 EM963692 BOLT 1/2" UNC 1-1/2" 2
28 EM963102 CAPSCREW, HHCS 1/2" NC X 1-1/4" 1
29 492584 NUT, LOCK1/2" NC 1
30 EM201537 HANDLE DUMP 1
31 EM98195 GRIP, DUMP HANDLE 1
32 EM969012 NUT, STOP 8
33 511910 BOLT 1/4" NC X 1-1/4" G5 8
34 2101428 NUT 1/4" NC 8
35 515180 U-SUPPORT PLASTIC DRUM 1
36 EM507416 GRATE, STATIONARY 1
37 0401450160 WASHER, FLAT 5/8" 1
38 507512 CARRIAGE BOLT 3/8" NC X3- 1/2" 4
39 505196 CARRIAGE BOLT 3/8" NC X1- 1/2" G5 8
40 511910 BOLT 1/4" NC X1- 1/4" G5 8
41 981635 BOLT, HEX, 1/2"13 NC X 1 3
42 492584 NUT, LOCK 1/2" 3
43 EM200287 ADJUSTABLE NUT, 3/8" 4
44 0401450160 WASHER, FLAT 5/8" 4
45 514760 DRUM HEAD 2
46 EM200286 CARRIAGE BOLT, 3/8" NC X 3" 4
47 EM966048 CARRIAGE BOLT, 3/8" NC X 3/4" 8

EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07) — PAGE 17

EM-90 S/P MIXER — DRUM & PADDLE SHAFT COMPLETE ASSY.

DRUM AND PADDLE SHAFT COMPLETE ASSY. (PLASTIC DRUM)

PAGE 18 — EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07)

EM-90 S/P MIXER — DRUM & PADDLE SHAFT COMPLETE ASSY.

DRUM AND PADDLE SHAFT COMPLETE ASSY. (PLASTIC DRUM)

NO. PART NO. PART NAME QTY. REMARKS

1 516068 DRUM AND SHAFT COMPLETE ASSY. ........... 1 ........... INCLUDES ITEMS LISTED BELOW:

530028 DRUM BEARING BRACKET 2
3249 CAP, DUST 1
20561-001 BEARING SEALED 2
491008 CAP, GREASE FITTING 2
EM916019 FITTING, GREASE 2
EM969013 NUT, LOCK 3/8" 8
3019092 WASHER, FLAT 3/8" 2
507844 SPRING, COMPRESSION 2
EM200288 PLATE, PACKING GLAND PRESSURE 2
EM200285 GLAND, PACKING HALF 2
EM200301 RING, SHAFT PACKING 2
EM200303 FOLLOWER, PACKING RING 2
506900 SUPPORT BRACKET 2
EM506310 DRUM, PLASTIC 1
EM961019 SET SCREW 2
530043 MAIN GEAR 1
501016 KEY, 3/8" X 88 MM 1
514753 SHAFT, PADDLE 1
925191 PIN COTTER 1
EM507417 GRATE, MOVEABLE 1
505070 PIN COTTER 2
492556 HEX NUT 1/2" G5 2
6109180 WASHER, LOCK 1/2" 2
EM963692 BOLT 1/2" UNC 1-1/2" 2
EM201537 HANDLE DUMP 1
EM98195 GRIP, DUMP HANDLE 1
EM969012 NUT, STOP 8
511910 BOLT 1/4" NC X 1-1/4" G5 8
2101428 NUT 1/4" NC 8
515180 U-SUPPORT PLASTIC DRUM 1
EM507416 GRATE, STATIONARY 1
507512 CARRIAGE BOLT 3/8" NC X3- 1/2" 4
505196 CARRIAGE BOLT 3/8" NC X1- 1/2" G5 8
511910 BOLT 1/4" NC X1- 1/4" G5 8
981635 BOLT, HEX, 1/2"13 NC X 1 3
492584 NUT, LOCK 1/2" 3
EM200287 ADJUSTABLE NUT, 3/8" 4
0401450160 WASHER, FLAT 5/8" 4
514760 DRUM HEAD 2
514753 PADDLE SHAFT 1
492584 NUT, LOCK 1/2" 6
EM200295 PADDLE ARM, CENTER ENGINE END 1
510721 BOLT, 1/2 " X 6" G5 2
EM200292 INSERT, PADDLE ARM 4
EM200296 PADDLE ARM, ENGINE END 1
504322 WASHER, FLAT 1/2" 6
EM200297 U-BOLT, END PADDLES 2
EM200294 PADDLE ARM, CENTER TOW END 1
492367 SCREW, HHC 5/16-18 X 1-3/4 G5 14
EM923023 WASHER, FLAT 5/16" 28
13352 BLADE, SIDE, POLY 4
EM203432 BLADE, SIDE, SCRAPPER 4
2105164 NUT, HEX 5/16" NC G5 14
EM923343 WASHER, LOCK 5/15" 14
EM200293 PADDLE ARM, TOW END 1
EM203433 BLADE ,SCRAPPER END 4

507518 BLADE, PLASTIC END 4

EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07) — PAGE 19

EM-90 S/P MIXER — DRUM & PADDLE SHAFT COMPLETE ASSY.

DRUM AND PADDLE SHAFT COMPLETE ASSY. (STEEL DRUM)

PAGE 20 — EM-90 PLASTER/MORTAR MIXER — PARTS MANUAL — REV. #6 (01/05/07)