MTD DA528 User Manual

Operator’s Manual

Illustrated Parts List

AERATOR

MTD # DESCRIPTION

DA528 Aerator 30 w/Brigss & Stratton 5 HP Engine w/ Closed Spoons 00029316 Set of 30 Open Spoons 00029393 Set of 30 Closed Spoons

FORWARD

The MTD Aerator-30 should only be operated and maintained by thoroughly trained individuals. The machine can cause serious injury to anyone who misuses the machine or does not understand it’s operation. All operators and maintenance personnel must read this entire manual for their personal safety. Note: Safety goggles should be worn

when operating or maintaining this machine.

This manual presents the safety and operating instructions and parts breakdown necessary to keep your MTD Aerator-30 at peak efficiency. If properly operated and maintained, your MTD Aerator-30 will give dependable service.

MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722

PRINTED IN U.S.A.

1 00002674 Open Spoon 1/2" 30 36 00012158 Flat Washer, 3/8, SAE, Yellow Zinc 11 2 00006131 Hex Nut, 3/8-16 65 37 00012168 Lock Washer, 5/16, Zinc 7 3 00006168 Flat Washer, USS 3/8 Zinc 4 38 00012171 HHCS, Standard, 3/8-16 x 1, Zinc 14 4 00006194 Lock Nut, Nylon Insert, #10-24 2 39 00012172 HHCS, Standard, 3/8-16 x 2, Zinc 1 5 00006246 Key, 3/16" x 1" 1 40 00012173 Lock Nut, Nylon Insert, 3/8-16 8 6 00006519 Idler, Flat 3616 1 41 00012178 HHCS, Standard, 5/16-18 x 1/2, Zinc 3 7 00008495 Capscrew, 3/8-16 x 1-3/4" 60 42 00012204 Cotter Pin, 3/32 x 3/4, Zinc 2 8 00008646 Bushing, Flange, Sintered, Bronze 2 43 00013311 Decal, Rotary “Danger-Keep Hands” 2

9 00008666 Cap Screw, Square Head, 5/16-18 x 2-1/2 1 44 00013433 Hex Nut, 5/16-18, Yellow 5 10 00008679 Rear, Wheel, 410/350 x 4-2Ply, White 2 45 00013733 Shoulder Bolt, Socket, 3/8 x 3/8 Zinc 1 11 00008700 Caster Wheel 2 46 00017633 Bearing, Single, Seal, 1630-RS 2 12 00008720 Bushing, 1/2 x 3/8 x 1/4, Bronze 1 47 00020282 Handle, Throw-Out 1 13 00008724 HHCS, 7/16-14, 1, Yellow Zinc 4 48 00020326 Throttle Cable 1 14 00008745 Screw, Round Head, Machine, 10-24 x 1/2 2 49 00020330 Belt Tensioner Rod, Zinc Plated 1 15 00008755 Clamp, To Hold Tubing on Handle 2 50 00020334 Jackshaft Complete 1 16 00008792 Woodruff Key, 3/16 x 3/4, #606 2 51 00020340 Reel Shaft 1 17 00009552 Small Pulley 1 52 01000377 Pin, Release Quick 3/8 Dia X3. 1 18 00009553 Large Pulley 1 53 19 00009557 V Belt 1 54 00051484 Plate Base 1 20 00009599 Sprocket, 40BS-10 x 3/4" BOR 1 55 00051485 Carton Top Cap & Top Frame 1 21 00009625 Chain #40 W/Master Link 1 56 00060017 Flat Washer, .06, .776, 1.25, SS 2 22 00009650 Master Link, #40 1 57 00060078 Grease Fitting, 1/4-28 x 3/16 STR 2 23 00009678 Clevis Pin, 3/8 x 1 1/8, Zinc 1 58 00090006 Decal, “Made In America 1 24 00009708 Carrige Bolt, 5/16-18 x 1-1/2 4 59 01002139 Decal, “MTD PRO” 1 25 00009748 Shaft Color, .760" x Bore w/SS Plate 6 60 01002393 Housing Assembly 1 26 00009812 Flat Washer , 5/16, SAE, Yellow Zinc 3 61 01002395 Belt & Chain Guard Assembly 1 27 00009816 Engine, Briggs & Stratton, 5 HP 1 62 01002397 Front Support Assembly 1 28 00009838 Lynch Pin, 3/8 x 2-1/4, Zinc 1 63 01002399 Reel Assembly 1 29 00009920 Lock Washer, 7/16, Zinc 4 64 01002401 Jackshaft Bearing Mount Assembly 1 30 00009968 Yoke, 3/8-24 Forged 1 65 01002403 Right Rear Wheel Axle 1 31 00010985 Cap, Screw, Socket Set, 5/16-18 x 1/4 1 66 01002405 Belt Tensioner 1 32 00011437 HHCS, Standard, 3/8-16 x 3/4, Zinc 2 67 00020342 Spacer, Belt Tensioner 1 33 00011971 Decal, “Grease Daily” 1 68 01002411 Handle Assembly w/Brace 1 34 00012156 Hex Nut, 3/8-24, Yellow 1 69 01002413 Handle Strut 1 35 00012157 Lock Washer, 3/8 Zinc 69