Mtd CC25GHT operators Manual

Operator’s Manual

2-CYCLE

GAS HEDGE TRIMMER
Model CC25GHT

CAUTION: Before using this product,
read this manual and follow all safety
rules and operating instructions.

P/N 9096-MD2005

PRINTED IN T

AIW

• SAFETY

• ASSEMBLY

• OPERATION

• MAINTENANCE

• PARTS LIST

AN

TABLE OF CONTENTS

Warranty Statement Page 2

Rules for Safe Operation Pages 3-7

Oil and Fuel Information Page 8

Starting / Stopping Instrustion Pages 9-10

Trimming Instructions Page 11

Maintenance and Repair Instructions

Pages 12-15

Troubleshooting Page 16

Specifications Page 17

Parts List Page 18

California/EPA Emission Control

Warranty Statement Page 19

Manufacturer’s Limited Warranty Page 20

WARRANTY STATEMENT

TWO YEAR LIMITED WARRANTY ON CUB CADET HEDGE TRIMMER

For two years from the date of purchase, when this Hedge trimmer is used and maintained according
to the operator’s manual, Cub Cadet will repair any defect in material or workmanship free of charge.

This warranty excludes the spark plug and air filter, which are expendable parts that can wear out from
normal use in less than two years.

If this Hedge trimmer is used for commercial or rental purposes, this warranty applies for only 90 days
from the date of purchase.

WARRANTY SERVICE IS AVAILABLE BY RETURNING THIS HEDGE TRIMMER TO THE NEAREST
CUB CADET REPAIR CENTER IN THE UNITED STATES. CALL 1-877-835-7841 FOR LOCATIONS.

This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.

CALIFORNIA PROPOSITION 65 WARNING

WARNING

THE ENGINE EXHAUST FROM THIS

PRODUCT CONTAINS CHEMICALS

KNOWN TO THE STATE OF CALIFORNIA

TO CAUSE CANCER, BIRTH DEFECTS OR

OTHER REPRODUCTIVE HARM.

SPARK ARRESTOR NOTE

NOTE: For users on U.S. Forest Land and in the
states of Califor

All U.S. For
Resources Codes 4442 and 4443), Oregon and
Washington require, by law that certain internal combus­tion engines operated on forest brush and/or grass-cov­ered areas be equipped with a spark arrestor, maintained
in effective working order, or the engine be constructed,
equipped and maintained for the prevention of fire.
Check with your state or local authorities for regulations

taining to these r

per

equirements could subject you to liability or a fine.

r

unit is factory equipped with a spark arrestor

requires replacement, ask a Cub Cadet or other qualified
service dealer to install the

nia, Maine, Or

est Land and the state of Califor

ements. Failur

equir

egon and W

Spark Arrestor Kit.

ashington.

nia (Public

e to follow these

This

. If it

2

RULES FOR SAFE OPERATION

The purpose of safety symbols is to attract your atten­tion to possible dangers. The safety symbols, and
explanations, deserve your careful attention and under­standing. The safety warnings do not by themselves
eliminate any danger. The instructions or warnings they
give are not substitutes for proper accident prevention
measures.

SYMBOL MEANING

SAFETY ALERT:

warning or caution. Attention is required in
order to avoid serious personal injury. May
be used in conjunction with other symbols
or pictographs.

NOTE: Advises you of information or instructions vital to

the operation or maintenance of the equipment.

Read the Operator’s Manual(s) and follow all warnings
and safety instructions.

Failure to do so can result in serious injury to the
operator and/or bystanders.

their

Indicates
danger,

• IMPORTANT SAFETY INSTRUCTIONS •

SYMBOL MEANING

DANGER:

serious injury to yourself or to others. Always
follow the safety precautions to reduce the
risk of fire, electric shock and personal injury.

WARNING:

result in injury to yourself and others.
Always follow the safety precautions to
reduce the risk of fire, electric shock and
personal injury.

CAUTION:

result in property damage or personal injury
to yourself or to others. Always follow the
safety precautions to reduce the risk of fire,
electric shock and personal injury.

Failure to obey a safety
warning may result in

Failure to obey a
safety warning can

Failure to obey a
safety warning may

READ ALL INSTRUCTIONS
BEFORE OPERATING

• Read the instructions carefully. Be familiar with the con­trols and proper use of the unit.

WARNING:

safety rules. Please read these instructions
before operating the unit in order to ensure the
safety of the operator and any bystanders.
Please keep these instructions for later use.

Do not operate this unit when tir

•
influence of alcohol, drugs, or medication.

• Children must not operate the unit. Teens must be
accompanied and guided by an adult.

• All guards and safety attachments must be installed
properly before operating the unit.

• Inspect the unit before use. Replace damaged parts.
Check for fuel leaks. Make sur
place and secur
chipped, or damaged in any way. Do not operate the
unit with loose or damaged parts.

• Carefully inspect the area before starting the unit.
Remove all debris and hard or sharp objects such as
glass, wire, etc.

Clear the ar

•
minimum, keep all children, bystanders, and pets out­side a 50 feet (15 m.) radius; there still may be a risk to
bystanders fr
encouraged to wear eye pr
approached, stop the unit immediately.

e. Replace par

ea of children, bystanders, and pets. At a

own objects. Bystanders should be

om thr

otection. If you ar

When using the unit,
you must follow the

ed, ill, or under the

e all fasteners ar
ts that are cracked,

e in

e

FUEL SAFETY WARNINGS

WARNING:

vapors can explode if ignited. Take the follow­ing precautions:

• Store fuel only in containers specifically designed and
approved for the storage of such material.

• Avoid creating a source of ignition for spilled fuel. Do
not start the engine until fuel vapors dissipate.

• Always stop the engine and allow it to cool before
filling the fuel tank. Never remove the cap of the fuel
tank, or add fuel, when the engine is hot. Never
operate the unit without the fuel cap securely in place.
Loosen the fuel tank cap slowly to r
in the tank.

Add fuel in a clean, well-ventilated outdoor area where

•

e no sparks or flames. Slowly r

e ar

ther
cap only after stopping engine. Do not smoke while
fueling or mixing fuel. W
unit immediately

• Move the unit at least 30 feet (9.1 m) from the fueling
source and site before starting the engine. Do not
smoke. Keep sparks and open flames away from the
area while adding fuel or operating the unit.

3

. Always wipe unit dr

ipe up any spilled fuel from the

Gasoline is highly
flammable, and its

elieve any pr

emove the fuel

y befor

essur

e using.

e

RULES FOR SAFE OPERATION

WHAT TO DO

READ
(IF ANY ENCLOSED) THOROUGHLY BEFORE OPERAT­ING YOUR UNIT.

1.

2 REFUEL IN A SAFE PLACE. Open fuel cap slowly to

3. COMPLY WITH ALL FIRE PREVENTION REGULA-

4. TURN UNIT OFF before setting it down.

5. ALWAYS HOLD UNIT FIRMLY WITH BOTH HANDS,

6. KEEP ALL SCREWS AND FASTENERS TIGHT.

7. KEEP HANDLES DRY, clean and free of fuel mixture.

8. CHECK AREA YOU WILL BE TRIMMING FOR

9.

10. STOP ENGINE before examining trimmer blades.

11. STORE EQUIPMENT AWAY FROM POSSIBLE IGNI-

12.

13. OPERATION OF EQUIPMENT should always be

YOUR USER MANUAL AND ALL SUPPLEMENTS

WEAR CLOSE FITTING, TOUGH WORK CLOTHING
that will provide protection, such as long slacks or
trousers, safety work shoes, heavy duty work gloves,
hard hat, a safety face shield, or safety glasses for eye
protection and a good grade of ear plugs or other
sound barriers for hearing protection.

release any pressure which may have formed in fuel
tank. To prevent a fire hazard, move at least 30 feet
(9.1 meters) from fueling area before starting.

TIONS. COMPLIANCE WITH ALL LOCAL, STATE,
OR FEDERAL LAWS IN THE UNITED STATES IS
THE USER’S RESPONSIBILITY. Your unit comes with
a spark arrester screen furnished in the user kit.
Replacement spark arrester screen kits are available
at your nearest Cub Cadet Authorized Service Center.
Call 1-877-835-7841 fro nearest location.

the thumb and fingers encircling the handles.

Never operate this equipment if it is improperly adjust­ed or not completely and securely assembled.

DEBRIS that may be struck or thrown during opera­tion.

TS OF YOUR BODY AND CLOTHING

KEEP ALL P

Y FROM TRIMMER BLADES when starting or

A

W

A
running engine. Before starting engine, make sure
trimmer blades will not come in contact with any
obstacle.

TION SOURCES, such as gas-powered water
heaters
heaters, etc.

ALWAYS KEEP THE BLADE GUIDES AND BLADES

FREE OF DEBRIS B
OFF position and remove spark plug boot to avoid any
chance of accidental starting before cleaning blades
or performing any mainenance.

icted to mature and proper

restr

.

als

AR

, clothes dr

, or oil-fired fur

ers

y

UILD-UP

, por

naces

urn ignition switch to

T

.

ly instr

ucted individu

tab

WHAT NOT TO DO

DO NOT USE ANY OTHER FUEL than that recom-

1.
mended in your manual. Always follow instructions in
the Fuel and Lubrication section of this manual. Never
use gasoline unless it is proper
engine lubricant. Permanent damage to engine will
result, voiding manufacturer’s warranty.

2. DO NOT SMOKE while refueling or operating equip­ment.

3. DO NOT OPERATE UNIT WITHOUT A MUFFLER
and properly installed muffler shield.

4. DO NOT TOUCH or let your hands or body come in
contact with the muffler. Hold unit with thumbs and fin­gers encircling the handles.

5. DO NOT OPERATE UNIT IN AWKWARD POSI­TIONS, off balance, outstretched arms, or one-hand­ed. Always use two hands when operating.

le

-

ly mixed with 2-cycle

4 5

RULES FOR SAFE OPERATION

HEDGE TRIMMER SAFETY RULES

1. The Hedge Trimmer must not be used by anyone
under the age of 16.

2. Keep children, other people and pets away from the
trimmer.

3. Always dress properly. Don’t wear loose clothing or
jewelry; they can be caught in moving parts. Use of
gloves and substantial footwear is recommended
when working outdoors. Wear protective hair covering
to contain long hair.

4. Use face or dust mask if operation is dusty.

5. Do not use the trimmer if the cutting device is not
secured properly or is damaged.

6. Before starting the trimmer, make sure that the cutting
blade is not touching stones or debris.

7. When the trimmer is in operation, keep the cutting
section away from all parts of the body.

8. Do not cut against hard objects. This could cause
injury or damage the trimmer.

9. Only cut during broad daylight or with corresponding
artificial light.

10. When the trimmer is not in use, store it in a dry place
and out of the reach of children.

11. Never use the trimmer when it is raining.Try to prevent
it from getting wet or being exposed to humidity. Do
not leave it outside overnight. Do not cut damp or wet
bushes.

12. Do not attempt to remove cut material or hold materi­al to be cut when blades are moving. Make sure trim­mer switch is off when clearing jammed material from
blades. Do not grasp the exposed cutting blades or
cutting edges when picking up or holding the hedge
trimmer.

13. Don’t force hedge trimmer, it will do the job better and
with less likelihood of risk of injury at the rate for which
it was designed.

14. Stay alert, watch what you are doing. Use common

Do not operate hedge trimmer when you are

.

sense
tired.

15. Maintain hedge trimmer with care, keep cutting blades

p and clean f

shar
the risk of injury. Keep handles dry, clean and free
from oil and grease.

or best performance and to reduce

SPECIAL NOTE: Exposure to vibrations through pro­longed use of gasoline powered hand tools could cause
blood vessel or nerve damage in the fingers, hands, and
joints of people prone to circulation disorders or abnor­mal swelling. Pr
linked to blood vessel damage in otherwise healthy peo­ple. If symptoms occur such as numbness, pain, loss of
strength, change in skin color or texture, or loss of feeling
in the fingers, hands or joints, discontinue use of this tool
and seek medical attention. An anti-vibration system
does not guarantee avoidance of these problems. Users
who operate power tools on a regular basis must closely
monitor their physical condition and the condition of this
tool.

olonged use in cold weather has been

SAVE THESE INSTRUCTIONS

RULES FOR SAFE OPERATION

SAFETY AND INTERNATIONAL SYMBOLS

This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.

SYMBOL MEANING

• SAFETY ALERT SYMBOL

Indicates danger, warning, or caution.
May be used in conjunction with
other symbols or pictographs.

• READ OPERATOR'S MANUAL

WARNING: Read the

Operator’s Manual(s) and follow
all warnings and safety
instructions. Failure to do so can
result in serious injury to the
operator and/or bystanders.

• WEAR EYE, HEARING AND HARD­HAT PROTECTION

WARNING: Thrown

objects and loud noise can
cause severe eye injury and
hearing loss. Wear eye protec­tion meeting ANSI Z87.1-1989
standards and ear protection
when operating this unit. Wear a
hard hat. Use a full face shield
when needed.

SYMBOL MEANING

• PRIMER BULB

Pump the primer bulb 10 times.

• UNLEADED FUEL

Always use clean, fresh unleaded fuel.

• OIL

Refer to operator's manual for the
proper type of oil.

• ON/OFF CONTROL

ON / START / RUN

• ON/OFF CONTROL

OFF OR STOP

MINIMUM OPERA

•

TING DIST

ANCE

WARNING: Keep

children, bystanders, and
animals 50 feet (15 meters)

away. If approached stop unit

immediately.

• DO NOT USE IN THE RAIN

WARNING: Avoid danger-

ous envir
your unit in the rain, or in damp or
wet conditions. Moisture is a shock
hazar

onments. Never operate

d.

• CHOKE LEVER POSITIONS

1 • FULL

2 • PARTIAL Choke Position

3 • RUN Position

6 7

Choke Position

RULES FOR SAFE OPERATION

KNOW YOUR HEDGE TRIMMER

13

12

4

3

5

6

7

1

2

10

9

8

11

14

15

HEDGE TRIMMER COMPONENTS

1. Blades

2. Safety Guard

3. Front Handle

4. Primer Bulb

5. Fuel Cap
ON-OFF Switch

6.

7. Throttle Lock

8. Choke Lever

9. Air Filter Cover

10. Spark Plug

11. Starter Handle

12. Safety Switch
Rear Handle

13.

14. Throttle Trigger

15. Muffler Cover