P45 Neo/ G45 Neo
/ P43 Neo Series
MS-7519 (v1.X) Mainboard
G52-75191X1
i
Copyright Notice
The material in this document is the intellectual property of M ICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks are the properties of their respective owners.
NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trademarks of NVIDIA Corporation in the United States and/or other countries.
AMD, Athlon™, Athlon™ XP, Thoroughbred™, and Duron™ are registered trademarks of AMD Corporation.
Intel® and Pentium® are registered trademarks of Intel Corporation.
PS/2 and OS®/2 are registered trademarks of International Business Machines Corporation.
W indows® 95/98/2000/NT/XP/Vista are registered trademarks of Microsoft Corporation.
Netware® is a registered trademark of Novell, Inc.
Award® is a registered trademark of Phoenix Technologies Ltd. AMI® is a registered trademark of American Megatrends Inc.
Revision History
Revision |
Revision History |
Date |
V1.0 |
First release for PCB 1.X |
April 2008 |
Technical Support
If a problem arises with your system and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance.
Visit the MSI website for FAQ, technical guide, BIOS updates, driver updates, and other inf ormation: ht tp://global.msi.com.tw/index.php? func=service
Contact our technical staff at: http://ocss.msi.com.tw
ii
Safety Instructions
1.Always read the safety instructions carefully.
2.Keep this User’s Manual for future reference.
3.Keep this equipment away from humidity.
4.Lay this equipment on a reliable flat surface before setting it up.
5.The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS.
6.Make sure the voltage of the power source and adjust properly 110/220V before connecting the equipment to the power inlet.
7.Place the power cord such a way that people can not step on it. Do not place anything over the power cord.
8.Always Unplug the Power Cord before inserting any add-on card or module.
9.All cautions and warnings on the equipment should be noted.
10.Never pour any liquid into the opening that could damage or cause electrical shock.
11.If any of the following situations arises, get the equipment checked by service personnel:
†The power cord or plug is damaged.
†Liquid has penetrated into the equipment.
†The equipment has been exposed to moisture.
†The equipment does not work well or you can not get it work according to User’s Manual.
†The equipment has dropped and damaged.
†The equipment has obvious sign of breakage.
12.DONOT LEAVETHIS EQUIPMENT INANENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 600 C (1400F), IT MAYDAMAGE THE EQUIPMENT.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
iii
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below.
†Reorient or relocate the receiving antenna.
†Increase the separation between the equipment and receiver.
†Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
†Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.
VOIR LANOTICE D’INSTALLATIONAVANT DE RACCORDER AU RESEAU.
Micro-Star International
MS-7519
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
iv
WEEE (Waste Electrical and Electronic Equipment) Statement
v
vi
vii
|
CONTENTS |
|
Copyright |
Notice .............................................................................................................. |
ii |
Trademarks ....................................................................................................................... |
ii |
|
Revision |
History .............................................................................................................. |
ii |
Technical |
Support ........................................................................................................... |
ii |
Safety Instructions ......................................................................................................... |
iii |
|
FCC-B Radio Frequency Interference Statement ........................................................ |
iv |
|
WEEE (Waste Electrical and Electronic Equipment) Statement .................................... |
v |
|
Chapter 1. Getting Started .................................................................................... |
1-1 |
|
Mainboard Specifications ................................................................................... |
1-2 |
|
Mainboard Layout ................................................................................................ |
1-4 |
|
Packing Checklist ................................................................................................. |
1-5 |
|
Chapter 2. Hardware Setup .................................................................................. |
2-1 |
|
Quick Components Guide .................................................................................... |
2-2 |
|
CPU (Central Processing Unit) ............................................................................ |
2-3 |
|
Memory................................................................................................................. |
2-7 |
|
Power Supply ...................................................................................................... |
2-9 |
|
Back Panel .......................................................................................................... |
2-10 |
|
Connectors ........................................................................................................ |
2-12 |
|
Jumpers .............................................................................................................. |
2-19 |
|
Slots |
.................................................................................................................... |
2-20 |
Chapter 3 BIOS Setup ............................................................................................. |
3-1 |
|
Entering Setup ..................................................................................................... |
3-2 |
|
The Main Menu ..................................................................................................... |
3-4 |
|
Standard CMOS Features ................................................................................... |
3-6 |
|
Advanced BIOS Features ................................................................................... |
3-9 |
|
Integrated Peripherals ....................................................................................... |
3-13 |
|
Power Management Setup ............................................................................... |
3-15 |
|
H/W Monitor ........................................................................................................ |
3-18 |
|
BIOS Setting Password ..................................................................................... |
3-19 |
|
Cell Menu ............................................................................................................ |
3-20 |
|
Load Fail-Safe/ Optimized Defaults ................................................................. |
3-24 |
|
Appendix A Realtek ALC888 Audio ................................................................... |
A-1 |
|
Installing the Realtek HD Audio Driver ................................................................ |
A-2 |
|
Software Configuration ...................................................................................... |
A-4 |
|
Hardware Setup ................................................................................................ |
A-19 |
|
viii
Appendix B Dual Core Center .............................................................................. |
B-1 |
Activating Dual Core Center ............................................................................... |
B-2 |
Main ...................................................................................................................... |
B-3 |
DOT (Dynamic OverClocking) ............................................................................. |
B-5 |
Clock ..................................................................................................................... |
B-6 |
Voltage ................................................................................................................. |
B-7 |
FAN Speed ........................................................................................................... |
B-8 |
Temperature ......................................................................................................... |
B-9 |
User Profile ........................................................................................................ |
B-10 |
ix
x
Getting Started
Chapter 1
Getting Started
Thank you for choosing the P45 Neo/ G45 Neo/ P43 Neo Series (MS-7519 v1.X) ATX mainboard. The P45 Neo/ G45 Neo/ P43 Neo Series mainboards are based on Intel® P45/ G45/ P43 & ICH10 chipsets for optimal system efficiency. Designed to fit the advanced Intel®
Core 2 Extreme, Core 2 Quad, Core 2 Duo, Pentium Dual- C ore an d Ce leron Dua l- Cor e LG A7 75 processor, the P45 Neo/ G45 Neo/ P43 Neo Series deliver a high performance and professional desktop platform solution.
1-1
MS-7519 Mainboard
Mainboard Specifications
Processor Support
-Intel® Core 2 Extreme, Core 2 Quad, Core 2 Duo, Pentium DualCore and Celeron Dual-Core processors in the LGA775 package
-Intel® next generation 45 nm Multi-core CPU
*(For the latest information about CPU, please visit http://global.msi.com.tw/index.php?func=cpuform)
Supported FSB
- 1600* (OC)/ 1333/ 1066/ 800 MHz
Chipset
-North Bridge: Intel® P45/ G45/ P43 chipset
-South Bridge: Intel® ICH10 chipset
Memory Support
-4 DDR2 DIMMs support DDR2 1066/ 800/ 667 SDRAM (240pin / 1. 8V / 16GB Max)
(For more information on compatible components, please visit http://global.msi.com.tw/index.php?func=testreport)
LAN
- Supports PCIE LAN 10/100/1000 Fast Ethernet by Realtek 8111C
Audio
-Chip integrated by Realtek® ALC888
-Flexible 8-channel audio with jack sensing
-Compliant with Azalia 1.0 Spec
-Meets Microsoft Vista Premium spec
IDE
-1 IDE port by JMicron JMB 368
-Supports Ultra DMA 66/100 mode
-Supports PIO, Bus Master operation mode
SATA
-6 SATAII ports by ICH10 (SATA1~6)
-Supports storage and data transfers at up to 3 Gb/s
1394 (optional)
- Supports 1394 by JMicron JMB381
1-2
Getting Started
FDD
-1 floppy port
-Supports 1 FDD with 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB
Connectors
Back panel
-1 PS/2 mouse port
-1 PS/2 keyboard port
-1 Parallel port
-1 Serial port
-1 VGA port (for G45 only)
-4 USB 2.0 Ports
-1 LAN jack (10/100/1000)
-6 flexible audio jacks
-1 1394 port (optional)
On-Board Pinheaders / Connectors
-4 USB 2.0 pinheaders
-1 1394 pinheader (optional)
-1 chassis intrusion connector
-1 SPDIF-out pinheader
-1 CD-in connector
-1 front audio pinheader
-1 TPM Module connector (optional)
-2 Hardware Overclock FSB jumpers (JB1 & JB2)
TPM (optional)
- Supports TPM
Slots
-1 PCI Express x16 slot, supports up to PCI Express 2.0 x16 speed
-2 PCI Express x1 slots
-3 PCI slots, support 3.3V/ 5V PCI bus Interface
Form Factor
- ATX (30.5cm X 22.0cm)
Mounting
- 6 mounting holes
1-3
MS-7519 Mainboard
Mainboard Layout
Top : mouse |
|
|
|
|
|
SYSFAN1 |
|
|
Bottom: |
|
|
|
|
|
|
|
|
keyboard |
|
JPWR2 |
|
|
|
|
|
|
|
|
|
|
CPUFAN1 |
|
|
|
|
Parallel port |
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
JPWR |
|
Bottom: |
|
|
|
|
|
|
|
|
COM port |
|
|
|
|
|
|
|
|
VGA port(for G45) |
|
|
|
|
|
|
|
|
Top: 1394(optional) |
|
|
|
|
|
|
|
|
Bottom: USB ports |
|
|
|
|
|
|
|
|
Top: LAN Jack |
|
|
DIMM1 DIMM2 |
DIMM3 DIMM4 |
|
|
|
IDE1 |
Bottom: USB ports |
|
|
|
|
|
|||
|
|
|
|
|
|
|||
|
|
|
P45/G45/P43 |
|
|
|
|
|
T:Line-In |
|
|
|
|
|
|
|
|
M:Line-Out |
JB2 |
|
|
|
|
|
|
|
B:Mic |
JB1 |
|
|
|
|
|
|
|
T:RS-Out |
|
|
|
|
|
|
|
|
M:CS-Out |
|
|
|
|
|
|
SYSFAN2 |
|
B:SS-Out |
|
|
|
|
|
|
|
|
|
|
PCI _E1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RTL8111C |
|
|
|
|
|
|
|
|
|
|
PCI _E2 |
|
|
|
JMicron |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
JMB368 |
JCI1 |
|
|
|
|
|
|
|
SATA1 |
SATA3 |
|
|
|
PCI _E3 |
|
Intel |
|
SATA5 |
||
I/O |
|
|
|
ICH10 |
|
|||
Chip |
|
|
|
|
|
|||
|
|
PCI 1 |
|
|
|
|
|
|
|
|
PCI 2 |
|
BATT |
|
|
|
|
ALC888 |
|
|
+ |
SATA2 |
SATA4 |
SATA6 |
||
|
|
|
JBAT1 |
|
||||
|
|
|
JMicron |
|
||||
|
|
|
JMB381 |
|
||||
|
|
|
|
|
|
|
|
|
|
|
PCI 3 |
(optional) |
|
JUSB4 |
JUSB3 |
JUSB2 |
JUSB1 |
|
|
|
|
|||||
|
|
|
|
JTPM1 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
(optional ) |
|
|
|
|
JAUD1 |
JCD1 |
JSP1 |
FDD 1 |
|
JFP2 |
JFP1 |
|
|
|
P45 Neo/ G45 Neo/ P43 Neo Series |
|
|
|
||||
|
|
(MS-7519 v1.X) ATX Mainboard |
|
|
|
|
||
1-4
Getting Started
Packing Checklist
MSI motherboard |
MSI Driver/Utility CD |
Back IO Shield |
|
|
Power Cable |
SATA Cable |
IDE Cable |
User’s Guide
and Quick Guide
* The pictures are for reference only and may vary from the packing contents of the product you purchased.
1-5
Hardware Setup
Chapter 2
Hardware Setup
This chapter provides you with the information about hardware setup procedures. While doing the installation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly.
Use a grounded wrist strap before handling computer components. Static elec tric ity may damage the components.
2-1
MS-7519 Mainboard
Quick Components Guide
JB1/JB2, |
|
|
SYSFAN1, |
|
p.2-19 |
CPU, p.2-3 |
p.2-14 |
|
|
JPWR2, p.2-9 |
CPUFAN1, |
|
|
|
p.2-14 |
|
|
||
|
|
|
|
|
|
|
|
|
DDR2 DIMMs, |
|
|
|
|
p.2-7 |
|
|
|
|
JPWR1, |
Back Panel, |
|
|
|
p.2-9 |
|
|
|
|
|
p.2-10 |
|
|
|
|
|
|
|
|
IDE1, |
|
|
|
|
p.2-12 |
PCIE, |
|
|
|
SYSFAN2, |
|
|
|
p.2-14 |
|
p.2-20 |
|
|
|
|
|
|
|
|
|
|
|
|
|
JCI1, p.2-14 |
PCI, |
|
|
|
SATA, |
|
|
|
p.2-13 |
|
p.2-20 |
|
|
|
|
|
|
|
|
|
|
|
|
|
JUSB1~4, |
JAUD1, |
|
|
|
p.2-18 |
p.2-17 |
|
|
|
|
JCD1, |
FDD1, |
JBAT1, p.2-19 |
JFP1, JFP2 |
|
p.2-16 JSP1, |
p.2-12 J1394_1, |
JTPM1, |
p.2-16 |
|
p.2-15 |
|
p.2-15 |
p.2-17 |
|
2-2 |
|
|
|
|
Hardware Setup
CPU (Central Processing Unit)
W hen you are installing the CPU, make sure to install the cooler to prevent overheating. If you do not have the CPU cooler, consult your dealer before turning on the computer.
For the latest information about CPU, please visit http://global.msi.com.tw/index.php? func=cpuform
Important
Overheating
Overheating will seriously damage the CPU and system. Always make sure the cooling fan can work properly to protect the CPU from overheating. Make sure that you apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.
Replacing the CPU
While replacing the CPU, always turn off the ATX power supply or unplug the power supply’s power cord from the grounded outlet first to ensure the safety of CPU.
Overclocking
This mainboard is designed to support overclocking. However, please make sure your components are able to tolerate such abnormal setting, while doing overclocking. Any attempt to operate beyond product specifications is not recommended. We do not guarantee the damages or risks caused by inadequate operation or beyond product specifications.
Introduction to LGA 775 CPU
The pin-pad side of LGA 775 CPU.
The surface of LGA 775 CPU. Remember to apply some thermal paste on it for better heat dispersion.
Alignment Key |
Alignment Key |
Yellow triangle is the Pin 1 indicator |
Yellow triangle is the Pin 1 indicator |
|
2-3
MS-7519 Mainboard
CPU & Cooler Installation
When you are installing the CPU, make sure the CPU has a cooler attached on the top to prevent overheating. Meanwhile, do not forget to apply some thermal paste on CPU before installing the heat sink/cooler fan for better heat dispersion.
Follow the steps below to install the CPU & cooler correctly. Wrong installation will cause the damage of your CPU & mainboard.
1.The CPU socket has a plastic cap on it to protect the contact from damage. Before you install the CPU, always cover it to protect the socket pin.
2.Remove the cap from lever hinge side (as the arrow shows).
3. The pins of socket reveal.
4. Open the load lever.
Important
1.Confirm if your CPU cooler is firmly installed before turning on your system.
2.Do not touch the CPU socket pins to avoid damaging.
3.The availability of the CPU land side cover depends on your CPU packing.
2-4
5.Lift the load lever up and open the load plate.
Hardware Setup
6.After confirming the CPU direction for correct mating, put down the CPU in the socket housing frame. Be sure to grasp on the edge of the CPU base. Note that the alignment keys are matched.
alignment key
7.Visually inspect if the CPU is seated well into the socket. If not, take out the CPU with pure vertical motion and reinstall.
8.Cover the load plate onto the package.
2-5
MS-7519 Mainboard
9.Press down the load lever lightly onto the load plate, and then secure the lever with the hook under retention tab.
11.Press the four hooks down to fasten the cooler. Then rotate the locking switch (refer to the correct direction marked on it) to lock the hooks.
locking switch
10.Align the holes on the mainboard with the heatsink. Push down the cooler until its four c lips get wedged into the holes of the mainboard.
12.Turn over the mainboard to confirm that the clip-ends are correctly inserted.
Important
1.Read the CPU status in BIOS (Chapter 3).
2.Whenever CPU is not installed, always protect your CPU socket pin with the plastic cap covered (shown in Figure 1) to avoid damaging.
3.Mainboard photos shown in this section are for demonstration of the CPU/ cooler installation only. The appearance of your mainboard may vary depending on the model you purchase.
2-6
Hardware Setup
Memory
These DIMM slots are used for installing memory modules.
For more information on compatible components, please visit http://global.msi.com. tw/index.php?func=testreport
DDR2
240-pin, 1.8V
56x2=112 pin |
64x2=128 pin |
Dual-Channel Memory Population Rules
In Dual-Channel mode, the memory modules can transmit and receive data with two data bus lines simultaneously. Enabling Dual-Channel mode can enhance the system performance. Please refer to the following illustrations for population rules under Dual-Channel mode.
1
DIMM1
DIMM2
DIMM3
DIMM4
2
DIMM1
DIMM2
DIMM3
DIMM4
Installed
Empty
Important
-DDR2 memory modules are not interchangeable with DDR and the DDR2 standard is not backwards compatible. You should always install DDR2 memory modules in the DDR2 DIMM slots.
-In Dual-Channel mode, make sure that you install memory modules of the same type and density in different channel DIMM slots.
-To enable successful system boot-up, always insert the memory modules into the DIMM1 first.
-Due to the chipset resource deployment, the system density will only be detected up to 15+GB (not full 16GB) when each DIMM is installed with a 4GB memory module.
2-7
MS-7519 Mainboard
Installing Memory Modules
1.The memory module has only one notch on the center and will only fit in the right orientation.
2.Insert the memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the DIMM slot. The plastic clip at each side of the DIMM slot will automatically close when the memory module is properly seated.
Important
You can barely see the golden finger if the memory module is properly inserted in the DIMM slot.
3.Manually check if the memory module has been locked in place by the DIMM slot clips at the sides.
Volt 
Notch
2-8
Hardware Setup
Power Supply
ATX 24-Pin Power Connector: JPWR1
This connector allows you to connect an ATX 24-pin power supply. To connect the ATX 24-pin power supply, make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned. Then push down the power supply firmly into the connector.
You may use the 20-pin ATX power supply as you like. If you’d like to use the 20-pin ATX power supply, please plug your power supply along with pin 1 & pin 13 (refer to the image at the right hand).
Pin Definition
pin 13
pin 12
12 |
24 |
PIN |
SIGNAL |
PIN |
SIGNAL |
|
|
1 |
+3.3V |
13 |
+3.3V |
|
|
2 |
+3.3V |
14 |
-12V |
|
|
3 |
GND |
15 |
GND |
JPWR1 |
|
4 |
+5V |
16 |
PS-ON# |
|
5 |
GND |
17 |
GND |
|
|
|
6 |
+5V |
18 |
GND |
|
|
7 |
GND |
19 |
GND |
|
|
8 |
PWROK |
20 |
Res |
|
|
9 |
5VSB |
21 |
+5V |
|
|
10 |
+12V |
22 |
+5V |
1 |
13 |
11 |
+12V |
23 |
+5V |
|
|
12 |
+3.3V |
24 |
GND |
ATX 4-pin Power Connector: JPWR2
This power connector is used to provide power to the CPU.
Pin Definition
|
JPWR2 |
|
|
|
PIN |
SIGNAL |
|
|
|
||
4 |
2 |
|
|
1 |
GND |
||
3 |
1 |
2 |
GND |
|
|
3 |
12V |
|
|
4 |
12V |
Important
1.Make sure that all the connectors are connected to proper ATX power supplies to ensure stable operation of the mainboard.
2.Power supply of 400 watts (and above) is highly recommended for system stability.
2-9
MS-7519 Mainboard
Back Panel
Parallel Port |
(optional) |
LAN |
|
Mouse |
1394 Port |
||
|
|||
|
|
Line-In RS-Out |
|
|
|
Line-Out CS-Out |
Keyboard |
Serial Port |
VGA Port |
USB Port |
USB Port |
Mic |
SS-Out |
|
|
|
||||
|
|
(for G45) |
|
|
|
|
Mouse/Keyboard
The standard PS/2® mouse/keyboard DIN connector is for a PS/2® mouse/keyboard.
Parallel Port
A parallel port is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended Capabilities Parallel Port (ECP) mode.
Serial Port
The serial port is a 16550A high speed communications port that sends/ receives 16 bytes FIFOs. You can attach a serial mouse or other serial devices directly to the connector.
VGA Port (for G45)
The DB15-pin female connector is provided for monitor.
1394 Port (optional)
The IEEE1394 port on the back panel provides connection to IEEE1394 devices.
USB Port
The USB (Universal Serial Bus) port is for attaching USB devices such as keyboard, mouse, or other USB-compatible devices.
2-10
|
|
|
|
|
|
Hardware Setup |
LAN |
|
|
|
|
|
|
The standard RJ-45 LAN jack is for connection Yellow |
Green / Orange |
|||||
to the Local Area Network (LAN). You can con- |
|
|||||
nect a network cable to it. |
|
|
|
|
||
|
|
|
|
|||
LED |
Color |
LED State |
Condition |
|
||
|
|
Off |
LAN link is not established. |
|
||
Left |
Yellow |
On (steady state) |
LAN link is established. |
|
||
|
|
On (brighter & pulsing) The computeris communicating with another computer on the LAN. |
||||
|
Green |
Off |
10 Mbit/sec data rate is selected. |
|
||
Right |
|
On |
100 Mbit/sec data rate is selected. |
|
||
|
Orange |
On |
1000 Mbit/sec data rate is selected. |
|
||
Audio Ports
These audio connectors are used for audio devices. It is easy to differentiate between audio effects according to the color of audio jacks.
Line-In (Blue) - Line In is used for external CD player, tapeplayer or other audio devices.
Line-Out (Green) - Line Out, is a connector for speakers or headphones.
Mic (Pink) - Mic, is a connector for microphones.
RS-Out (Black) - Rear-Surround Out in 4/ 5.1/ 7.1 channel mode.
CS-Out (Orange) - Center/ Subwoofer Out in 5.1/ 7.1 channel mode. SS-Out (Gray) - Side-Surround Out 7.1 channel mode.
2-11
MS-7519 Mainboard
Connectors
Floppy Disk Drive Connector: FDD1
This connector supports 360KB, 720KB, 1.2MB, 1.44MB or 2.88MB floppy disk drive.
IDE Connector: IDE1
This connector supports IDE hard disk drives, optical disk drives and other IDE devices.
Important
If you install two IDE devices on the same cable, you must configure the drives separately to master / slave mode by setting jumpers. Refer to IDE device’s documentation supplied by the vendors for jumper setting instructions.
2-12
Hardware Setup
Serial ATA Connector: SATA1~6
This connector is a high-speed Serial ATA interface port. Each connector can connect to one Serial ATA device.
SATA1 SATA3 SATA5
SATA2 SATA4 SATA6
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may occur during transmission.
2-13
Loading...